Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
lcreate(1)			 User Commands			    lcreate(1)

NAME
       lcreate -  upload transcripts and their corresponding files

SYNOPSIS
       lcreate	[-FilnNrTV]  [	-% | -q	| -v  ]	 [ -c checksum ] [ -h host ] [
       -p port ] [ -P ca-pem-directory ] [ -t stored-name  ]  [	 -U user  ]  [
       -w auth-level  ]	 [ -x ca-pem-file ] [ -y cert-pem-file ] [ -z private-
       key-file	] [ -Z compression-level ] create-able-transcript

DESCRIPTION
       lcreate reads and uploads a transcript and all corresponding  files  to
       the radmind server.

       lcreate verifies	the size listed	in the transcript with the actual size
       of the file and stops on	any differences.  If the -F option  is	given,
       lcreate will store the file on the server and give a warning.

       If  the	-n option is given, no files or	transcripts are	uploaded.  In-
       stead, lcreate uses access(2) to	verify that all	 files	in  the	 tran-
       script  exist  in the filesystem, are readable by the user and have the
       same size as listed in the transcript.  If used	with  the  -c  option,
       rather  than calling access(2), checksums are caluclated	to verify file
       contents	and user access.

       If the -N option	is given, indicating the transcript specified for  up-
       load  is	 negative, lcreate will	upload all corresponding files as zero
       length.

       If the -T option	is given, lcreate will upload the transcript only.  No
       corresponding  files will be uploaded. The transcript's stored name is,
       by default, the last part ( after the slash ) of	the given path,	or  as
       specified  by  the name given with the -t option.  lcreate will print (
       to the standard output )	the entire protocol exchange with the  radmind
       server when the -v option is given.

       By  default,  lcreate  displays	the percentage of bytes	processed in a
       format that can be passed directly to iHook.

       lcreate stores a	Macintosh HFS+ file's data and corresponding  metadata
       in a single applefile(5)	on the server.	With the -N option, applefiles
       are stored with a zero length resource fork, zero length	data fork  and
       a  creator  type	 of  RDMD.   Systems running Mac OS X on UFS-formatted
       drives do not need this special support.

OPTIONS
       -%		  percentage done progress output.

       -c checksum	  enables checksuming.

       -F		  ignore file size differences.

       -h hostname	  specifies the	radmind	server,	by default radmind.

       -i		  force	output linebuffering.

       -l		  Turn on user authentication.	Requires a TLS.

       -N		  uploads a negative transcript	then uploads all  cor-
			  responding files as zero length.

       -n		  Don't	 upload	 any files or transcripts.  Verify all
			  files	in the transcript exist	in the filesystem  and
			  have the size	listed in the transcript.

       -p port		  specifies a port, by default 6222.

       -P ca-pem-directory
			  specifies  a directory that contains certificates to
			  be used when	verifying  the	server.	  Certificates
			  must	be  in	PEM format and the directory must have
			  been processed with the openssl c_rehash utility.

       -q		  suppress all messages.

       -r		  use random seed file $RANDFILE if  that  environment
			  variable   is	  set,	 $HOME/.rnd   otherwise.   See
			  RAND_load_file(3o).

       -T		  uploads the transcript only, and not the correspond-
			  ing files.

       -t stored-name	  specifies  the  name under which the transcript will
			  be stored when saved on the server.

       -U user		  Specifes the user for	user authentication.   By  de-
			  fault, the login name	returned by getlogin() will be
			  used.

       -V		  displays the version of lcreate,  a  list   of  sup-
			  ported  checksumming	algorithms in descending order
			  of preference	and then exits.

       -v		  increase the verbosity.  -v produces	one  line  for
			  each	file  stored  on the server.  -vv displays all
			  communication	with the radmind server.

       -w auth-level	  TLS authorization level, by default 0.  0 = no  TLS,
			  1 = server verification, 2 = server and client veri-
			  fication.

       -x ca-pem-file	  Certificate authority's public certificate,  by  de-
			  fault	 /var/radmind/cert/ca.pem.  The	default	is not
			  used when -P is specified.

       -y cert-pem-file	  Client's public certificate,	by  default  /var/rad-
			  mind/cert/cert.pem.

       -z private-key-file
			  Client's   private   key,   by   default   /var/rad-
			  mind/cert/cert.pem.

       -Z compression-level
			  Compress all outbound	data.	compression-level  can
			  be between 0 and 9: 1	gives best speed, 9 gives best
			  compression, 0 gives no compression at all (the  in-
			  put data is simply copied a block at a time).

SEE ALSO
       fsdiff(1),  ktcheck(1),	lapply(1),  lcksum(1),	lfdiff(1),  lmerge(1),
       lsort(1), twhich(1), applefile(5), radmind(8), RAND_load_file(3o).

RSUG			       December	12, 2010		    lcreate(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=lcreate&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help