Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
lavpipe(1)		      MJPEG tools manual		    lavpipe(1)

NAME
       lavpipe - creates raw YUV streams from pipe list	scripts

SYNOPSIS
       lavpipe [-o num]	[-n num] pipe-list

DESCRIPTION
       lavpipe	reads  a  script  file called 'pipe list' that is of a similar
       structure as the	edit lists that	can be fed  into  lav2yuv.   For  info
       about the pipe list format see below.

       The  pipe  list defines several video sources and filters that are com-
       bined by	lavpipe	to produce a single output YUV stream on stdout	(which
       for  example  can  be  compressed and stored to disk via	mpeg2enc(1) or
       yuv2lav(1)).

OPTIONS
       The command line	options	are used to output a specific part of the  re-
       sulting	video stream.  That means you can tell lavpipe how many	frames
       to skip and how many frames to deliver from that	point on.

       -o num This is the frame	offset of the  output  video.  The  first  num
	      frames  of the resulting video simply are	neither	calculated nor
	      written to stdout. This value defaults to	0.

       -n num This is the frame	count. If the input files or  streams  defined
	      in  the  pipe list script	are long enough, the output will be of
	      exactly num frames length. A value of 0 means  that  all	frames
	      until  the  last one as defined in the pipe list will be written
	      out, as long as there's some input (0 is the default).

       pipe-list
	      This is name of the pipe list file that lavpipe will  'execute'.
	      For information about this file's	format see below.

       -?     Display a	synopsis of the	command	syntax.

EXAMPLES
       lavpipe -o 100 -n 25 film.pli
	      would  calculate	and  output to stdout frames 100 to 124	as de-
	      fined in film.pli	(in PAL	this would be the 5th  second  of  the
	      film).

       lavpipe input.pli | yuv2lav -q80	output.avi
	      would save the movie assembled by	lavpipe	as a single AVI	file.

USAGE
       In  this	 section  the  format  of  lavpipe's input files the pipe list
       scripts is explained. If	you need some examples or a more detailed  tu-
       torial,	please read the	mjpegtools(1) manpage's	section	about CREATING
       MOVIE TRANSITIONS. and the file README.lavpipe that should be  included
       in the distribution.  Also feel free to contact us via the mailing list
       (see below).

       A pipe list contains of two parts: the YUV source list and after	 this,
       as many sequence	descriptions as	wanted.	It always begins with the fol-
       lowing two lines:

       LAV Pipe	List
	      This is the first	line in	every pipe list	script.	It is used  as
	      a	simple test if lavpipe really was given	a pipe list script and
	      not your PhD thesis as input.

       NTSC|PAL
	      This is the second line in every pipe list and can be either PAL
	      or  NTSC,	 depending on what video standard you use. I don't re-
	      member if	this is	used at	the moment.

       Now follows the source list:

       num    This is the number of input commands. lavpipe will read the next
	      num lines	and interpret them as input stream commands.

       command (num times)
	      This  is	a valid	command	line with two variables	$o and $n that
	      will be replaced by lavpipe with the offset and number of	frames
	      that the program has to output. Example:
	      lav2yuv -o $o -f $n input.avi

       Thus, an	example	source list could look like this:
       2
       lav2yuv -o $o -f	$n scene1.avi
       lav2yuv -o $o -f	$n scene2.avi

       after this you can append as many sequence descriptions as needed. Each
       of them is built	up as follows:

       num    The number of frames that	this sequence will last.

       num    The number of inputs that	will be	used in	this  sequence.	  This
	      number must of course be less than or equal to the number	of in-
	      puts that	are defined above.

       idx [ofs] (num times)
	      These are	the indices to the sources that	are defined at the be-
	      ginning  of  the file (first source is 0)	with an	optional frame
	      offset (i.e. sequence starts with	frame number ofs of  this  in-
	      put.) - this value defaults to 0.	Example:
	      0	150

       command
	      This is a	valid command line to a	YUV filter tool	that reads num
	      input streams and	writes one output stream,  combining  its  in-
	      puts. Optionally,	the filter tool	can be given the two $o	and $n
	      variables	that will be replaced by lavpipe as in the source com-
	      mands  (see  above). For further info read README.lavpipe	or the
	      documentation for	the filter programs (if	available). An example
	      filter could look	like this:
	      transist.flt -o 0	-O 255 -s $o -n	$n -d 50
	      And  if  the  sequence  only has one input that simply should be
	      copied to	the output, you	can use	a dash instead	of  a  command
	      line:
	      -

       And  here's an example for a complete pipe list that implements a tran-
       sistion from scene1.avi to scene2.avi

       REMOVE THE COMMENTS AFTER The #

       LAV Pipe	List
       PAL
       2
       lav2yuv -o $o -f	$n scene1.avi
       lav2yuv -o $o -f	$n scene2.avi
       50	     # first sequence: 50 frames
       1	     #	 contains one input:
       0 0	     #	   scene1.avi, offset 0
       -	     #	 simple	output
       25	     # second sequence:	25 frames
       2	     #	 contains two inputs:
       0 50	     #	   scene1.avi, offset 50
       1	     #	   scene2.avi, offset 0
       transist.flt -o 0 -O 255	-s $o -n $n -d 50 # transistion
       50	     # third sequence: 50 frames
       1	     #	 contains one input:
       1 25	     #	   scene2.avi, offset 25
       -	     #	 simple	output

BUGS
       I'm sure	there are enough of them. lavpipe often	accepts	malformed pipe
       lists  and  then	writes out a video that	was all	but intended - without
       warning.

       The mention of $n above is wrong. At one	time there were	two parameters
       but now a program is allowed to produce as many frames as it wants. THe
       author of the program hard coded, for reasons unknown, $n to be 0.

NOTES
       There are also some serious limitations in the system, such  as	frame-
       by-frame	 processing. But as the	goal when writing lavpipe was the sim-
       plicity of the pipeline,	other tools will have to be written to do more
       interesting tasks.
       But  I  want to note that it is very well possible to write a pipe list
       that combines several files, and	then use that pipe list	 as  an	 input
       for another pipe	list by	simply using the lavpipe command in the	source
       list (see above)	- this can be already used to do some nice things,  if
       you have	some nice filters.

       Comments	are NOT	allowed	in pipelist files. The comments	(text after #)
       above are for illustration only.

AUTHOR
       This man	page was written by Philipp Zabel.
       If you have questions, remarks, problems	or you just  want  to  contact
       the developers, the main	mailing	list for the MJPEG-tools is:
	 mjpeg-users@lists.sourceforge.net

       For more	info, see our website at
	      http://mjpeg.sourceforge.net

SEE ALSO
       lav2yuv(1),   lavplay(1),  lavrec(1),  mpeg2enc(1),  yuv2lav(1),	 yuvs-
       caler(1)

MJPEG Tools Team		  2 June 2001			    lavpipe(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | USAGE | BUGS | NOTES | AUTHOR | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=lavpipe&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help