Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
L2CONTROL(8)            FreeBSD System Manager's Manual           L2CONTROL(8)

NAME
     l2control - L2CAP configuration utility

SYNOPSIS
     l2control [-hn] -a BD_ADDR command [parameters ...]

DESCRIPTION
     The l2control utility connects to the local device with the specified
     BD_ADDR and attempts to send the specified command.  The l2control
     utility will print results to the standard output and error messages to
     the standard error.

     The options are as follows:

     -a BD_ADDR
             Connect to the local device with the specified BD_ADDR.  Example:
             -a 00:01:02:03:04:05.

     -h      Display usage message and exit.

     -n      Show Bluetooth addresses as numbers.  Normally l2control attempts
             to resolve Bluetooth addresses, and display them symbolically.

     command
             One of the supported commands (see below).  Special command help
             can be used to obtain the list of all supported commands.  To get
             more information about specific command use help command.

     parameters
             One or more optional space separated command parameters.

COMMANDS
     The currently supported node commands in l2control are:

           Read_Node_Flags
           Read_Debug_Level
           Write_Debug_Level
           Read_Connection_List
           Read_Channel_List
           Read_Auto_Disconnect_Timeout
           Write_Auto_Disconnect_Timeout

DIAGNOSTICS
     The l2control utility exits 0 on success, and >0 if an error occurs.

SEE ALSO
     netgraph(3), netgraph(4), ng_l2cap(4), l2ping(8)

AUTHORS
     Maksim Yevmenkin <m_evmenkin@yahoo.com>

FreeBSD 11.0-PRERELEASE          June 14, 2002         FreeBSD 11.0-PRERELEASE

NAME | SYNOPSIS | DESCRIPTION | COMMANDS | DIAGNOSTICS | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=l2control&sektion=8&manpath=FreeBSD+5.2-RELEASE>

home | help