Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
keytest(6)		      Svgalib User Manual		    keytest(6)

NAME
       keytest - tests the svgalib raw keyboard	functions

SYNOPSIS
       keytest

DESCRIPTION
       A program to test the low-level keyboard	interface. This	uses basic VGA
       functionality (or an svga mode you specify). Works only	in  256	 color
       modes.

       Cursor  keys  or	keypad <1>, <2>, <3>, <4>, <5>,	<6>, <7>, <8>, and <9>
       move the	cursor.	 Keypad	<0> or <Enter> changes color.  <Q> or <Ctrl>-C
       quits. (autoquit	after 60 seconds).

       Note  that the svgalib diagonal <7>, <9>, <1>, and <3> keypad keys emu-
       lation is flawed	in that	it emulates the	vertical/horizontal  keys.  If
       one of these is pressed too, it's release confuses svgalib.

       The top pixel line shows	a blue pixel for each key which	is reported to
       be pressed.

       You can set a videomode to use by setting the environment variable  SV-
       GALIB_DEFAULT_MODE  to  a  number  (see vgatest for a list) or a	string
       like G0x1x2 where you replace 0 with desired x resolution, 1  with  the
       desired	y  rez,	 and  2	with the desired number	of colors (2, 16, 256,
       32K, 64K, 16M, 16M4). Again, only certain choices  are  available,  see
       vgatest for a list.

       In case nothing is selected, G320x200x256 is choosen.

       This  demo  is part of svgalib and can be found in the demos/ subdirec-
       tory of the original svgalib distribution. However, it is not installed
       in  the	system by default, s.t.	it is unclear where you	can find it if
       your svgalib was	installed by some linux	distribution. Even then,  when
       you  have  the demo on your system, you probably	won't have the sources
       s.t. it is only of limited use for you.

       In case of any such problem, simply get an  svgalib  distribution  from
       the  net.  You  even  don't need	to install it. Just make in the	demos/
       subdirecty. As of this writing,	svgalib-1.2.12.tar.gz  is  the	latest
       version	 and   can   be	 retrieved  by	ftp  from  sunsite.unc.edu  at
       /pub/Linux/libs/graphics	and tsx-11.mit.edu at  /pub/linux/sources/libs
       which will most probably	be mirrored by a site close to you.

SEE ALSO
       svgalib(7),    vgagl(7),	   libvga.config(5),	threed(6),   accel(6),
       bg_test(6), eventtest(6), forktest(6),  fun(6),	mousetest(6),  scroll-
       test(6),	speedtest(6), spin(6), testaccel(6), testgl(6),	testlinear(6),
       vgatest(6), plane(6), wrapdemo(6)

AUTHOR
       This manual page	was edited by Michael Weller  <eowmob@exp-math.uni-es-
       sen.de>.	 The  exact  source  of	 the referenced	demo as	well as	of the
       original	documentation is unknown.

       It is very likely that both are at least	to some	extent are due to Harm
       Hanemaayer <H.Hanemaayer@inter.nl.net>.

       Occasionally  this  might be wrong. I hereby asked to be	excused	by the
       original	author and will	happily	accept any additions or	corrections to
       this first version of the svgalib manual.

Svgalib	1.3.0			 8 April 1998			    keytest(6)

NAME | SYNOPSIS | DESCRIPTION | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=keytest&sektion=6&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help