Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
JAIL(8)			  BSD System Manager's Manual		       JAIL(8)

NAME
     jail -- manage system jails

SYNOPSIS
     jail [-dhilqv] [-J	jid_file] [-u username]	[-U username] [-cmr]
	  param=value ... [command=command ...]
     jail [-dqv] [-f conf_file]	[-p limit] [-cmr] [jail]
     jail [-qv]	[-f conf_file] [-rR] [*	| jail ...]
     jail [-dhilqv] [-J	jid_file] [-u username]	[-U username] [-n jailname]
	  [-s securelevel] [path hostname [ip[,...]] command ...]

DESCRIPTION
     The jail utility creates new jails, or modifies or	removes	existing
     jails.  A jail (or	"prison") is specified via parameters on the command
     line, or in the jail.conf(5) file.

     At	least one of the options -c, -m	or -r must be specified.  These	op-
     tions are used alone or in	combination to describe	the operation to per-
     form:

     -c	     Create a new jail.	 The jail jid and name parameters (if speci-
	     fied on the command line) must not	refer to an existing jail.

     -m	     Modify an existing	jail.  One of the jid or name parameters must
	     exist and refer to	an existing jail.  Some	parameters may not be
	     changed on	a running jail.

     -r	     Remove the	jail specified by jid or name.	All jailed processes
	     are killed, and all jails that are	children of this jail are also
	     removed.

     -rc     Restart an	existing jail.	The jail is first removed and then re-
	     created, as if "jail -r" and "jail	-c" were run in	succession.

     -cm     Create a jail if it does not exist, or modify the jail if it does
	     exist.

     -mr     Modify an existing	jail.  The jail	may be restarted if necessary
	     to	modify parameters than could not otherwise be changed.

     -cmr    Create a jail if it doesn't exist,	or modify (and possibly
	     restart) the jail if it does exist.

     Other available options are:

     -d	     Allow making changes to a dying jail, equivalent to the
	     allow.dying parameter.

     -f	conf_file
	     Use configuration file conf_file instead of the default
	     /etc/jail.conf.

     -h	     Resolve the host.hostname parameter (or hostname) and add all IP
	     addresses returned	by the resolver	to the list of addresses for
	     this jail.	 This is equivalent to the ip_hostname parameter.

     -i	     Output (only) the jail identifier of the newly created jail(s).
	     This implies the -q option.

     -J	jid_file
	     Write a jid_file file, containing the parameters used to start
	     the jail.

     -l	     Run commands in a clean environment.  This	is deprecated and is
	     equivalent	to the exec.clean parameter.

     -n	jailname
	     Set the jail's name.  This	is deprecated and is equivalent	to the
	     name parameter.

     -p	limit
	     Limit the number of commands from exec.* that can run simultane-
	     ously.

     -q	     Suppress the message printed whenever a jail is created, modified
	     or	removed.  Only error messages will be printed.

     -R	     A variation of the	-r option that removes an existing jail	with-
	     out using the configuration file.	No removal-related parameters
	     for this jail will	be used	-- the jail will simply	be removed.

     -s	securelevel
	     Set the kern.securelevel MIB entry	to the specified value inside
	     the newly created jail.  This is deprecated and is	equivalent to
	     the securelevel parameter.

     -u	username
	     The user name from	host environment as whom jailed	commands
	     should run.  This is deprecated and is equivalent to the
	     exec.jail_user and	exec.system_jail_user parameters.

     -U	username
	     The user name from	the jailed environment as whom jailed commands
	     should run.  This is deprecated and is equivalent to the
	     exec.jail_user parameter.

     -v	     Print a message on	every operation, such as running commands and
	     mounting filesystems.

     If	no arguments are given after the options, the operation	(except	re-
     move) will	be performed on	all jails specified in the jail.conf(5)	file.
     A single argument of a jail name will operate only	on the specified jail.
     The -r and	-R options can also remove running jails that aren't in	the
     jail.conf(5) file,	specified by name or jid.

     An	argument of "*"	is a wildcard that will	operate	on all jails, regard-
     less of whether they appear in jail.conf(5); this is the surest way for
     -r	to remove all jails.  If hierarchical jails exist, a partial-matching
     wildcard definition may be	specified.  For	example, an argument of
     "foo.*" would apply to jails with names like "foo.bar" and	"foo.bar.baz".

     A jail may	be specified with parameters directly on the command line.  In
     this case,	the jail.conf(5) file will not be used.	 For backward compati-
     bility, the command line may also have four fixed parameters, without
     names: path, hostname, ip,	and command.  This mode	will always create a
     new jail, and the -c and -m options do not	apply (and must	not be
     present).

   Jail	Parameters
     Parameters	in the jail.conf(5) file, or on	the command line, are gener-
     ally of the form "name=value".  Some parameters are boolean, and do not
     have a value but are set by the name alone	with or	without	a "no" prefix,
     e.g.  persist or nopersist.  They can also	be given the values "true" and
     "false".  Other parameters	may have more than one value, specified	as a
     comma-separated list or with "+=" in the configuration file (see
     jail.conf(5) for details).

     The jail utility recognizes two classes of	parameters.  There are the
     true jail parameters that are passed to the kernel	when the jail is cre-
     ated, which can be	seen with jls(8), and can (usually) be changed with
     "jail -m".	 Then there are	pseudo-parameters that are only	used by	jail
     itself.

     Jails have	a set of core parameters, and kernel modules can add their own
     jail parameters.  The current set of available parameters can be re-
     trieved via "sysctl -d security.jail.param".  Any parameters not set will
     be	given default values, often based on the current environment.  The
     core parameters are:

     jid     The jail identifier.  This	will be	assigned automatically to a
	     new jail (or can be explicitly set), and can be used to identify
	     the jail for later	modification, or for such commands as jls(8)
	     or	jexec(8).

     name    The jail name.  This is an	arbitrary string that identifies a
	     jail (except it may not contain a `.').  Like the jid, it can be
	     passed to later jail commands, or to jls(8) or jexec(8).  If no
	     name is supplied, a default is assumed that is the	same as	the
	     jid.  The name parameter is implied by the	jail.conf(5) file for-
	     mat, and need not be explicitly set when using the	configuration
	     file.

     path    The directory which is to be the root of the jail.	 Any commands
	     run inside	the jail, either by jail or from jexec(8), are run
	     from this directory.

     ip4.addr
	     A list of IPv4 addresses assigned to the jail.  If	this is	set,
	     the jail is restricted to using only these	addresses.  Any	at-
	     tempts to use other addresses fail, and attempts to use wildcard
	     addresses silently	use the	jailed address instead.	 For IPv4 the
	     first address given will be used as the source address when
	     source address selection on unbound sockets cannot	find a better
	     match.  It	is only	possible to start multiple jails with the same
	     IP	address	if none	of the jails has more than this	single over-
	     lapping IP	address	assigned to itself.

     ip4.saddrsel
	     A boolean option to change	the formerly mentioned behaviour and
	     disable IPv4 source address selection for the jail	in favour of
	     the primary IPv4 address of the jail.  Source address selection
	     is	enabled	by default for all jails and the ip4.nosaddrsel	set-
	     ting of a parent jail is not inherited for	any child jails.

     ip4     Control the availability of IPv4 addresses.  Possible values are
	     "inherit" to allow	unrestricted access to all system addresses,
	     "new" to restrict addresses via ip4.addr, and "disable" to	stop
	     the jail from using IPv4 entirely.	 Setting the ip4.addr parame-
	     ter implies a value of "new".

     ip6.addr, ip6.saddrsel, ip6
	     A set of IPv6 options for the jail, the counterparts to ip4.addr,
	     ip4.saddrsel and ip4 above.

     vnet    Create the	jail with its own virtual network stack, with its own
	     network interfaces, addresses, routing table, etc.	 The kernel
	     must have been compiled with the VIMAGE option for	this to	be
	     available.	 Possible values are "inherit" to use the system net-
	     work stack, possibly with restricted IP addresses,	and "new" to
	     create a new network stack.

     host.hostname
	     The hostname of the jail.	Other similar parameters are
	     host.domainname, host.hostuuid and	host.hostid.

     host    Set the origin of hostname	and related information.  Possible
	     values are	"inherit" to use the system information	and "new" for
	     the jail to use the information from the above fields.  Setting
	     any of the	above fields implies a value of	"new".

     securelevel
	     The value of the jail's kern.securelevel sysctl.  A jail never
	     has a lower securelevel than its parent system, but by setting
	     this parameter it may have	a higher one.  If the system se-
	     curelevel is changed, any jail securelevels will be at least as
	     secure.

     devfs_ruleset
	     The number	of the devfs ruleset that is enforced for mounting de-
	     vfs in this jail.	A value	of zero	(default) means	no ruleset is
	     enforced.	Descendant jails inherit the parent jail's devfs rule-
	     set enforcement.  Mounting	devfs inside a jail is possible	only
	     if	the allow.mount	and allow.mount.devfs permissions are effec-
	     tive and enforce_statfs is	set to a value lower than 2.  Devfs
	     rules and rulesets	cannot be viewed or modified from inside a
	     jail.

	     NOTE: It is important that	only appropriate device	nodes in devfs
	     be	exposed	to a jail; access to disk devices in the jail may per-
	     mit processes in the jail to bypass the jail sandboxing by	modi-
	     fying files outside of the	jail.  See devfs(8) for	information on
	     how to use	devfs rules to limit access to entries in the per-jail
	     devfs.  A simple devfs ruleset for	jails is available as ruleset
	     #4	in /etc/defaults/devfs.rules.

     children.max
	     The number	of child jails allowed to be created by	this jail (or
	     by	other jails under this jail).  This limit is zero by default,
	     indicating	the jail is not	allowed	to create child	jails.	See
	     the Hierarchical Jails section for	more information.

     children.cur
	     The number	of descendants of this jail, including its own child
	     jails and any jails created under them.

     enforce_statfs
	     This determines what information processes	in a jail are able to
	     get about mount points.  It affects the behaviour of the follow-
	     ing syscalls: statfs(2), fstatfs(2), getfsstat(2),	and
	     fhstatfs(2) (as well as similar compatibility syscalls).  When
	     set to 0, all mount points	are available without any restric-
	     tions.  When set to 1, only mount points below the	jail's chroot
	     directory are visible.  In	addition to that, the path to the
	     jail's chroot directory is	removed	from the front of their	path-
	     names.  When set to 2 (default), above syscalls can operate only
	     on	a mount-point where the	jail's chroot directory	is located.

     persist
	     Setting this boolean parameter allows a jail to exist without any
	     processes.	 Normally, a command is	run as part of jail creation,
	     and then the jail is destroyed as its last	process	exits.	A new
	     jail must have either the persist parameter or exec.start or
	     command pseudo-parameter set.

     cpuset.id
	     The ID of the cpuset associated with this jail (read-only).

     dying   This is true if the jail is in the	process	of shutting down
	     (read-only).

     parent  The jid of	the parent of this jail, or zero if this is a top-
	     level jail	(read-only).

     osrelease
	     The string	for the	jail's kern.osrelease sysctl and uname -r.

     osreldate
	     The number	for the	jail's kern.osreldate and uname	-K.

     allow.*
	     Some restrictions of the jail environment may be set on a per-
	     jail basis.  With the exception of	allow.set_hostname, these
	     boolean parameters	are off	by default.

	     allow.set_hostname
		     The jail's	hostname may be	changed	via hostname(1)	or
		     sethostname(3).

	     allow.sysvipc
		     A process within the jail has access to System V IPC
		     primitives.  This is deprecated in	favor of the per-mod-
		     ule parameters (see below).  When this parameter is set,
		     it	is equivalent to setting sysvmsg, sysvsem, and sysvshm
		     all to "inherit".

	     allow.raw_sockets
		     The jail root is allowed to create	raw sockets.  Setting
		     this parameter allows utilities like ping(8) and
		     traceroute(8) to operate inside the jail.	If this	is
		     set, the source IP	addresses are enforced to comply with
		     the IP address bound to the jail, regardless of whether
		     or	not the	IP_HDRINCL flag	has been set on	the socket.
		     Since raw sockets can be used to configure	and interact
		     with various network subsystems, extra caution should be
		     used where	privileged access to jails is given out	to un-
		     trusted parties.

	     allow.chflags
		     Normally, privileged users	inside a jail are treated as
		     unprivileged by chflags(2).  When this parameter is set,
		     such users	are treated as privileged, and may manipulate
		     system file flags subject to the usual constraints	on
		     kern.securelevel.

	     allow.mount
		     privileged	users inside the jail will be able to mount
		     and unmount file system types marked as jail-friendly.
		     The lsvfs(1) command can be used to find file system
		     types available for mount from within a jail.  This per-
		     mission is	effective only if enforce_statfs is set	to a
		     value lower than 2.

	     allow.mount.devfs
		     privileged	users inside the jail will be able to mount
		     and unmount the devfs file	system.	 This permission is
		     effective only together with allow.mount and only when
		     enforce_statfs is set to a	value lower than 2.  The devfs
		     ruleset should be restricted from the default by using
		     the devfs_ruleset option.

	     allow.mount.fdescfs
		     privileged	users inside the jail will be able to mount
		     and unmount the fdescfs file system.  This	permission is
		     effective only together with allow.mount and only when
		     enforce_statfs is set to a	value lower than 2.

	     allow.mount.nullfs
		     privileged	users inside the jail will be able to mount
		     and unmount the nullfs file system.  This permission is
		     effective only together with allow.mount and only when
		     enforce_statfs is set to a	value lower than 2.

	     allow.mount.procfs
		     privileged	users inside the jail will be able to mount
		     and unmount the procfs file system.  This permission is
		     effective only together with allow.mount and only when
		     enforce_statfs is set to a	value lower than 2.

	     allow.mount.linprocfs
		     privileged	users inside the jail will be able to mount
		     and unmount the linprocfs file system.  This permission
		     is	effective only together	with allow.mount and only when
		     enforce_statfs is set to a	value lower than 2.

	     allow.mount.linsysfs
		     privileged	users inside the jail will be able to mount
		     and unmount the linsysfs file system.  This permission is
		     effective only together with allow.mount and only when
		     enforce_statfs is set to a	value lower than 2.

	     allow.mount.tmpfs
		     privileged	users inside the jail will be able to mount
		     and unmount the tmpfs file	system.	 This permission is
		     effective only together with allow.mount and only when
		     enforce_statfs is set to a	value lower than 2.

	     allow.mount.zfs
		     privileged	users inside the jail will be able to mount
		     and unmount the ZFS file system.  This permission is ef-
		     fective only together with	allow.mount and	only when
		     enforce_statfs is set to a	value lower than 2.  See
		     zfs(8) for	information on how to configure	the ZFS
		     filesystem	to operate from	within a jail.

	     allow.quotas
		     The jail root may administer quotas on the	jail's
		     filesystem(s).  This includes filesystems that the	jail
		     may share with other jails	or with	non-jailed parts of
		     the system.

	     allow.socket_af
		     Sockets within a jail are normally	restricted to IPv4,
		     IPv6, local (UNIX), and route.  This allows access	to
		     other protocol stacks that	have not had jail functional-
		     ity added to them.

     Kernel modules may	add their own parameters, which	only exist when	the
     module is loaded.	These are typically headed under a parameter named af-
     ter the module, with values of "inherit" to give the jail full use	of the
     module, "new" to encapsulate the jail in some module-specific way,	and
     "disable" to make the module unavailable to the jail.  There also may be
     other parameters to define	jail behavior within the module.  Module-spe-
     cific parameters include:

     linux   Determine how a jail's Linux emulation environment	appears.  A
	     value of "inherit"	will keep the same environment,	and "new" will
	     give the jail it's	own environment	(still originally inherited
	     when the jail is created).

     linux.osname, linux.osrelease, linux.oss_version
	     The Linux OS name,	OS release, and	OSS version associated with
	     this jail.

     sysvmsg
	     Allow access to SYSV IPC message primitives.  If set to
	     "inherit",	all IPC	objects	on the system are visible to this
	     jail, whether they	were created by	the jail itself, the base sys-
	     tem, or other jails.  If set to "new", the	jail will have its own
	     key namespace, and	can only see the objects that it has created;
	     the system	(or parent jail) has access to the jail's objects, but
	     not to its	keys.  If set to "disable", the	jail cannot perform
	     any sysvmsg-related system	calls.

     sysvsem, sysvshm
	     Allow access to SYSV IPC semaphore	and shared memory primitives,
	     in	the same manner	as sysvmsg.

     There are pseudo-parameters that are not passed to	the kernel, but	are
     used by jail to set up the	jail environment, often	by running specified
     commands when jails are created or	removed.  The exec.* command parame-
     ters are sh(1) command lines that are run in either the system or jail
     environment.  They	may be given multiple values, which would run the
     specified commands	in sequence.  All commands must	succeed	(return	a zero
     exit status), or the jail will not	be created or removed, as appropriate.

     The pseudo-parameters are:

     exec.prestart
	     Command(s)	to run in the system environment before	a jail is cre-
	     ated.

     exec.start
	     Command(s)	to run in the jail environment when a jail is created.
	     A typical command to run is "sh /etc/rc".

     command
	     A synonym for exec.start for use when specifying a	jail directly
	     on	the command line.  Unlike other	parameters whose value is a
	     single string, command uses the remainder of the jail command
	     line as its own arguments.

     exec.poststart
	     Command(s)	to run in the system environment after a jail is cre-
	     ated, and after any exec.start commands have completed.

     exec.prestop
	     Command(s)	to run in the system environment before	a jail is re-
	     moved.

     exec.stop
	     Command(s)	to run in the jail environment before a	jail is	re-
	     moved, and	after any exec.prestop commands	have completed.	 A
	     typical command to	run is "sh /etc/rc.shutdown".

     exec.poststop
	     Command(s)	to run in the system environment after a jail is re-
	     moved.

     exec.clean
	     Run commands in a clean environment.  The environment is dis-
	     carded except for HOME, SHELL, TERM and USER.  HOME and SHELL are
	     set to the	target login's default values.	USER is	set to the
	     target login.  TERM is imported from the current environment.
	     The environment variables from the	login class capability data-
	     base for the target login are also	set.

     exec.jail_user
	     The user to run commands as, when running in the jail environ-
	     ment.  The	default	is to run the commands as the current user.

     exec.system_jail_user
	     This boolean option looks for the exec.jail_user in the system
	     passwd(5) file, instead of	in the jail's file.

     exec.system_user
	     The user to run commands as, when running in the system environ-
	     ment.  The	default	is to run the commands as the current user.

     exec.timeout
	     The maximum amount	of time	to wait	for a command to complete, in
	     seconds.  If a command is still running after this	timeout	has
	     passed, the jail will not be created or removed, as appropriate.

     exec.consolelog
	     A file to direct command output (stdout and stderr) to.

     exec.fib
	     The FIB (routing table) to	set when running commands inside the
	     jail.

     stop.timeout
	     The maximum amount	of time	to wait	for a jail's processes to exit
	     after sending them	a SIGTERM signal (which	happens	after the
	     exec.stop commands	have completed).  After	this many seconds have
	     passed, the jail will be removed, which will kill any remaining
	     processes.	 If this is set	to zero, no SIGTERM is sent and	the
	     jail is immediately removed.  The default is 10 seconds.

     interface
	     A network interface to add	the jail's IP addresses	(ip4.addr and
	     ip6.addr) to.  An alias for each address will be added to the in-
	     terface before the	jail is	created, and will be removed from the
	     interface after the jail is removed.

     ip4.addr
	     In	addition to the	IP addresses that are passed to	the kernel, an
	     interface,	netmask	and additional parameters (as supported	by
	     ifconfig(8)) may also be specified, in the	form
	     "interface|ip-address/netmask param ...".	If an interface	is
	     given before the IP address, an alias for the address will	be
	     added to that interface, as it is with the	interface parameter.
	     If	a netmask in either dotted-quad	or CIDR	form is	given after an
	     IP	address, it will be used when adding the IP alias.  If addi-
	     tional parameters are specified then they will also be used when
	     adding the	IP alias.

     ip6.addr
	     In	addition to the	IP addresses that are passed to	the kernel, an
	     interface,	prefix and additional parameters (as supported by
	     ifconfig(8)) may also be specified, in the	form
	     "interface|ip-address/prefix param	...".

     vnet.interface
	     A network interface to give to a vnet-enabled jail	after is it
	     created.  The interface will automatically	be released when the
	     jail is removed.

     ip_hostname
	     Resolve the host.hostname parameter and add all IP	addresses re-
	     turned by the resolver to the list	of addresses (ip4.addr or
	     ip6.addr) for this	jail.  This may	affect default address selec-
	     tion for outgoing IPv4 connections	from jails.  The address first
	     returned by the resolver for each address family will be used as
	     the primary address.

     mount   A filesystem to mount before creating the jail (and to unmount
	     after removing it), given as a single fstab(5) line.

     mount.fstab
	     An	fstab(5) format	file containing	filesystems to mount before
	     creating a	jail.

     mount.devfs
	     Mount a devfs(5) filesystem on the	chrooted /dev directory, and
	     apply the ruleset in the devfs_ruleset parameter (or a default of
	     ruleset 4:	devfsrules_jail) to restrict the devices visible in-
	     side the jail.

     mount.fdescfs
	     Mount a fdescfs(5)	filesystem on the chrooted /dev/fd directory.

     mount.procfs
	     Mount a procfs(5) filesystem on the chrooted /proc	directory.

     allow.dying
	     Allow making changes to a dying jail.

     depend  Specify a jail (or	jails) that this jail depends on.  When	this
	     jail is to	be created, any	jail(s)	it depends on must already ex-
	     ist.  If not, they	will be	created	automatically, up to the com-
	     pletion of	the last exec.poststart	command, before	any action
	     will taken	to create this jail.  When jails are removed the oppo-
	     site is true: this	jail will be removed, up to the	last
	     exec.poststop command, before any jail(s) it depends on are
	     stopped.

EXAMPLES
     Jails are typically set up	using one of two philosophies: either to con-
     strain a specific application (possibly running with privilege), or to
     create a "virtual system image" running a variety of daemons and ser-
     vices.  In	both cases, a fairly complete file system install of FreeBSD
     is	required, so as	to provide the necessary command line tools, daemons,
     libraries,	application configuration files, etc.  However,	for a virtual
     server configuration, a fair amount of additional work is required	so as
     to	replace	the "boot" process.  This manual page documents	the configura-
     tion steps	necessary to support either of these steps, although the con-
     figuration	steps may need to be refined based on local requirements.

   Setting up a	Jail Directory Tree
     To	set up a jail directory	tree containing	an entire FreeBSD distribu-
     tion, the following sh(1) command script can be used:

     D=/here/is/the/jail
     cd	/usr/src
     mkdir -p $D
     make world	DESTDIR=$D
     make distribution DESTDIR=$D

     In	many cases this	example	would put far more in the jail than needed.
     In	the other extreme case a jail might contain only one file: the exe-
     cutable to	be run in the jail.

     We	recommend experimentation, and caution that it is a lot	easier to
     start with	a "fat"	jail and remove	things until it	stops working, than it
     is	to start with a	"thin" jail and	add things until it works.

   Setting Up a	Jail
     Do	what was described in Setting Up a Jail	Directory Tree to build	the
     jail directory tree.  For the sake	of this	example, we will assume	you
     built it in /data/jail/testjail, for a jail named "testjail".  Substitute
     below as needed with your own directory, IP address, and hostname.

   Setting up the Host Environment
     First, set	up the real system's environment to be "jail-friendly".	 For
     consistency, we will refer	to the parent box as the "host environment",
     and to the	jailed virtual machine as the "jail environment".  Since jails
     are implemented using IP aliases, one of the first	things to do is	to
     disable IP	services on the	host system that listen	on all local IP	ad-
     dresses for a service.  If	a network service is present in	the host envi-
     ronment that binds	all available IP addresses rather than specific	IP ad-
     dresses, it may service requests sent to jail IP addresses	if the jail
     did not bind the port.  This means	changing inetd(8) to only listen on
     the appropriate IP	address, and so	forth.	Add the	following to
     /etc/rc.conf in the host environment:

	   sendmail_enable="NO"
	   inetd_flags="-wW -a 192.0.2.23"
	   rpcbind_enable="NO"

     192.0.2.23	is the native IP address for the host system, in this example.
     Daemons that run out of inetd(8) can be easily configured to use only the
     specified host IP address.	 Other daemons will need to be manually	con-
     figured --	for some this is possible through rc.conf(5) flags entries;
     for others	it is necessary	to modify per-application configuration	files,
     or	to recompile the application.  The following frequently	deployed ser-
     vices must	have their individual configuration files modified to limit
     the application to	listening to a specific	IP address:

     To	configure sshd(8), it is necessary to modify /etc/ssh/sshd_config.

     To	configure sendmail(8), it is necessary to modify
     /etc/mail/sendmail.cf.

     For named(8), it is necessary to modify /etc/namedb/named.conf.

     In	addition, a number of services must be recompiled in order to run them
     in	the host environment.  This includes most applications providing ser-
     vices using rpc(3), such as rpcbind(8), nfsd(8), and mountd(8).  In gen-
     eral, applications	for which it is	not possible to	specify	which IP ad-
     dress to bind should not be run in	the host environment unless they
     should also service requests sent to jail IP addresses.  Attempting to
     serve NFS from the	host environment may also cause	confusion, and cannot
     be	easily reconfigured to use only	specific IPs, as some NFS services are
     hosted directly from the kernel.  Any third-party network software	run-
     ning in the host environment should also be checked and configured	so
     that it does not bind all IP addresses, which would result	in those ser-
     vices also	appearing to be	offered	by the jail environments.

     Once these	daemons	have been disabled or fixed in the host	environment,
     it	is best	to reboot so that all daemons are in a known state, to reduce
     the potential for confusion later (such as	finding	that when you send
     mail to a jail, and its sendmail is down, the mail	is delivered to	the
     host, etc.).

   Configuring the Jail
     Start any jail for	the first time without configuring the network inter-
     face so that you can clean	it up a	little and set up accounts.  As	with
     any machine (virtual or not), you will need to set	a root password, time
     zone, etc.	 Some of these steps apply only	if you intend to run a full
     virtual server inside the jail; others apply both for constraining	a par-
     ticular application or for	running	a virtual server.

     Start a shell in the jail:

	   jail	-c path=/data/jail/testjail mount.devfs	\
		   host.hostname=testhostname ip4.addr=192.0.2.100 \
		   command=/bin/sh

     Assuming no errors, you will end up with a	shell prompt within the	jail.
     You can now run /usr/sbin/sysinstall and do the post-install configura-
     tion to set various configuration options,	or perform these actions manu-
     ally by editing /etc/rc.conf, etc.

	   +o   Configure /etc/resolv.conf so that name resolution within the
	       jail will work correctly.
	   +o   Run newaliases(1) to quell sendmail(8) warnings.
	   +o   Set a root password, probably different from the	real host sys-
	       tem.
	   +o   Set the timezone.
	   +o   Add accounts for	users in the jail environment.
	   +o   Install any packages the	environment requires.

     You may also want to perform any package-specific configuration (web
     servers, SSH servers, etc), patch up /etc/syslog.conf so it logs as you
     would like, etc.  If you are not using a virtual server, you may wish to
     modify syslogd(8) in the host environment to listen on the	syslog socket
     in	the jail environment; in this example, the syslog socket would be
     stored in /data/jail/testjail/var/run/log.

     Exit from the shell, and the jail will be shut down.

   Starting the	Jail
     You are now ready to restart the jail and bring up	the environment	with
     all of its	daemons	and other programs.  Create an entry for the jail in
     /etc/jail.conf:

	   testjail {
		   path	= /tmp/jail/testjail;
		   mount.devfs;
		   host.hostname = testhostname;
		   ip4.addr = 192.0.2.100;
		   interface = ed0;
		   exec.start =	"/bin/sh /etc/rc";
		   exec.stop = "/bin/sh	/etc/rc.shutdown";
	   }

     To	start a	virtual	server environment, /etc/rc is run to launch various
     daemons and services, and /etc/rc.shutdown	is run to shut them down when
     the jail is removed.  If you are running a	single application in the
     jail, substitute the command used to start	the application	for "/bin/sh
     /etc/rc"; there may be some script	available to cleanly shut down the ap-
     plication,	or it may be sufficient	to go without a	stop command, and have
     jail send SIGTERM to the application.

     Start the jail by running:

	   jail	-c testjail

     A few warnings may	be produced; however, it should	all work properly.
     You should	be able	to see inetd(8), syslogd(8), and other processes run-
     ning within the jail using	ps(1), with the	`J' flag appearing beside
     jailed processes.	To see an active list of jails,	use jls(8).  If
     sshd(8) is	enabled	in the jail environment, you should be able to ssh(1)
     to	the hostname or	IP address of the jailed environment, and log in using
     the accounts you created previously.

     It	is possible to have jails started at boot time.	 Please	refer to the
     "jail_*" variables	in rc.conf(5) for more information.

   Managing the	Jail
     Normal machine shutdown commands, such as halt(8),	reboot(8), and
     shutdown(8), cannot be used successfully within the jail.	To kill	all
     processes from within a jail, you may use one of the following commands,
     depending on what you want	to accomplish:

	   kill	-TERM -1
	   kill	-KILL -1

     This will send the	SIGTERM	or SIGKILL signals to all processes in the
     jail -- be	careful	not to run this	from the host environment!  Once all
     of	the jail's processes have died,	unless the jail	was created with the
     persist parameter,	the jail will be removed.  Depending on	the intended
     use of the	jail, you may also want	to run /etc/rc.shutdown	from within
     the jail.

     To	shut down the jail from	the outside, simply remove it with jail	-r,
     which will	run any	commands specified by exec.stop, and then send SIGTERM
     and eventually SIGKILL to any remaining jailed processes.

     The /proc/pid/status file contains, as its	last field, the	name of	the
     jail in which the process runs, or	"-" to indicate	that the process is
     not running within	a jail.	 The ps(1) command also	shows a	`J' flag for
     processes in a jail.

     You can also list/kill processes based on their jail ID.  To show pro-
     cesses and	their jail ID, use the following command:

	   ps ax -o pid,jid,args

     To	show and then kill processes in	jail number 3 use the following	com-
     mands:

	   pgrep -lfj 3
	   pkill -j 3
     or:

	   killall -j 3

   Jails and File Systems
     It	is not possible	to mount(8) or umount(8) any file system inside	a jail
     unless the	file system is marked jail-friendly, the jail's	allow.mount
     parameter is set, and the jail's enforce_statfs parameter is lower	than
     2.

     Multiple jails sharing the	same file system can influence each other.
     For example, a user in one	jail can fill the file system, leaving no
     space for processes in the	other jail.  Trying to use quota(1) to prevent
     this will not work	either,	as the file system quotas are not aware	of
     jails but only look at the	user and group IDs.  This means	the same user
     ID	in two jails share a single file system	quota.	One would need to use
     one file system per jail to make this work.

   Sysctl MIB Entries
     The read-only entry security.jail.jailed can be used to determine if a
     process is	running	inside a jail (value is	one) or	not (value is zero).

     The variable security.jail.max_af_ips determines how may address per ad-
     dress family a jail may have.  The	default	is 255.

     Some MIB variables	have per-jail settings.	 Changes to these variables by
     a jailed process do not affect the	host environment, only the jail	envi-
     ronment.  These variables are kern.securelevel, kern.hostname,
     kern.domainname, kern.hostid, and kern.hostuuid.

   Hierarchical	Jails
     By	setting	a jail's children.max parameter, processes within a jail may
     be	able to	create jails of	their own.  These child	jails are kept in a
     hierarchy,	with jails only	able to	see and/or modify the jails they cre-
     ated (or those jails' children).  Each jail has a read-only parent	param-
     eter, containing the jid of the jail that created it; a jid of 0 indi-
     cates the jail is a child of the current jail (or is a top-level jail if
     the current process isn't jailed).

     Jailed processes are not allowed to confer	greater	permissions than they
     themselves	are given, e.g., if a jail is created with allow.nomount, it
     is	not able to create a jail with allow.mount set.	 Similarly, such re-
     strictions	as ip4.addr and	securelevel may	not be bypassed	in child
     jails.

     A child jail may in turn create its own child jails if its	own
     children.max parameter is set (remember it	is zero	by default).  These
     jails are visible to and can be modified by their parent and all ances-
     tors.

     Jail names	reflect	this hierarchy,	with a full name being an MIB-type
     string separated by dots.	For example, if	a base system process creates
     a jail "foo", and a process under that jail creates another jail "bar",
     then the second jail will be seen as "foo.bar" in the base	system (though
     it	is only	seen as	"bar" to any processes inside jail "foo").  Jids on
     the other hand exist in a single space, and each jail must	have a unique
     jid.

     Like the names, a child jail's path appears relative to its creator's own
     path.  This is by virtue of the child jail	being created in the chrooted
     environment of the	first jail.

SEE ALSO
     killall(1), lsvfs(1), newaliases(1), pgrep(1), pkill(1), ps(1), quota(1),
     jail_set(2), devfs(5), fdescfs(5),	jail.conf(5), linprocfs(5),
     linsysfs(5), procfs(5), rc.conf(5), sysctl.conf(5), chroot(8), devfs(8),
     halt(8), ifconfig(8), inetd(8), jexec(8), jls(8), mount(8), named(8),
     reboot(8),	rpcbind(8), sendmail(8), shutdown(8), sysctl(8), syslogd(8),
     umount(8)

HISTORY
     The jail utility appeared in FreeBSD 4.0.	Hierarchical/extensible	jails
     were introduced in	FreeBSD	8.0.  The configuration	file was introduced in
     FreeBSD 9.1.

AUTHORS
     The jail feature was written by Poul-Henning Kamp for R&D Associates who
     contributed it to FreeBSD.

     Robert Watson wrote the extended documentation, found a few bugs, added a
     few new features, and cleaned up the userland jail	environment.

     Bjoern A. Zeeb added multi-IP jail	support	for IPv4 and IPv6 based	on a
     patch originally done by Pawel Jakub Dawidek for IPv4.

     James Gritton added the extensible	jail parameters, hierarchical jails,
     and the configuration file.

BUGS
     It	might be a good	idea to	add an address alias flag such that daemons
     listening on all IPs (INADDR_ANY) will not	bind on	that address, which
     would facilitate building a safe host environment such that host daemons
     do	not impose on services offered from within jails.  Currently, the sim-
     plest answer is to	minimize services offered on the host, possibly	limit-
     ing it to services	offered	from inetd(8) which is easily configurable.

NOTES
     Great care	should be taken	when managing directories visible within the
     jail.  For	example, if a jailed process has its current working directory
     set to a directory	that is	moved out of the jail's	chroot,	then the
     process may gain access to	the file space outside of the jail.  It	is
     recommended that directories always be copied, rather than	moved, out of
     a jail.

     In	addition, there	are several ways in which an unprivileged user outside
     the jail can cooperate with a privileged user inside the jail and thereby
     obtain elevated privileges	in the host environment.  Most of these	at-
     tacks can be mitigated by ensuring	that the jail root is not accessible
     to	unprivileged users in the host environment.  Regardless, as a general
     rule, untrusted users with	privileged access to a jail should not be
     given access to the host environment.

BSD				April 30, 2016				   BSD

NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | SEE ALSO | HISTORY | AUTHORS | BUGS | NOTES

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=jail&sektion=8&manpath=FreeBSD+11.0-RELEASE>

home | help