FreeBSD Manual Pages
ISCSI.CONF(5) BSD File Formats Manual ISCSI.CONF(5) NAME iscsi.conf -- iSCSI initiator configuration file DESCRIPTION The iscsi.conf configuration file is used by the iscsictl(8) and iscontrol(8) utilities. The general syntax is: # this is a comment nickname_1 { variable = value; ... } nickname_2 { variable = value; ... } ... AuthMethod Sets the authentication type. Type can be either "None", or "CHAP". Default is "None". When set to CHAP, both chapIName and chapSecret must be defined. chapIName Login for CHAP authentication. chapSecret Secret for CHAP authentication. tgtChapName Target login for Mutual CHAP authentication. tgtChapSecret Target secret for Mutual CHAP authentication. HeaderDigest Sets the header digest; a checksum calculated over the header of iSCSI PDUs, and verified on receive. Digest can be either "None", or "CRC32C". Default is "None". DataDigest Sets the data digest; a checksum calculated over the Data Section of iSCSI PDUs, and verified on receive. Digest can be either "None", or "CRC32C". Default is "None". InitiatorName Sets the initiator name. By default, the name is con- catenation of "iqn.1994-09.org.freebsd:" with the host- name. TargetName Sets the target name. Not required for discovery ses- sions. TargetAddress Sets the target address and port, in address[:port] for- mat. The address can be either an IP address, or host- name. The optional port defaults to 3260. SessionType Sets the session type. Type can be either "Discovery", or "Normal". Default is "Normal". For normal sessions, the TargetName must be defined. Discovery sessions re- sult in the initiator connecting to all the targets re- turned by SendTargets iSCSI discovery with the defined TargetAddress. Enable Enable or disable the session. State can be either "On", or "Off". Default is "On". Offload Name of selected iSCSI hardware offload driver. Default is "None". Protocol Name of selected protocol. It can be either "iSER", for iSCSI over RDMA, or "iSCSI". Default is "iSCSI". FILES /etc/iscsi.conf EXAMPLES myiscsi { # nickname targetaddress = iscsi1 targetname = iqn.1900.com.com:sn.123456 } myiscsi6 { # nickname targetaddress = [2001:db8::de:ef]:3260 targetname = iqn.1900.com.com:sn.123456 } chaptest { targetaddress = 10.0.0.1; targetname = iqn.1900.com.com:sn.123456; initiatorname = iqn.2005-01.il.ac.huji.cs:nobody; authmethod = CHAP; chapiname = iqn.2005-01.il.ac.huji.cs:nobody; chapsecret = "secretsecret"; } SEE ALSO iscontrol(8), iscsictl(8) BSD May 6, 2016 BSD
NAME | DESCRIPTION | FILES | EXAMPLES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=iscsi.conf&sektion=5&manpath=FreeBSD+12.0-RELEASE+and+Ports>