Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
ISCSI-SWP(1)		 iscsi-swp: get/set software w		  ISCSI-SWP(1)

NAME
       iscsi-swp - Utility to get/set software write protect on	an iSCSI LUN

SYNOPSIS
       iscsi-swp [ OPTIONS ] <ISCSI-PORTAL>

       iscsi-ls	[-i --initiator-name=<IQN>] [-s	--swp {on|off}]
		[-d --debug=<INTEGER>] [-? --help] [--usage]

DESCRIPTION
       iscsi-swp is a utility to get or	set the	software write protect on an
       iSCSI LUN.

ISCSI PORTAL URL FORMAT
       iSCSI portal format is
       'iscsi://[<username>[%<password>]@]<host>[:<port>]'

       Username	and password are only required if the target requires CHAP
       authentication. Optionally you can specify the username and password
       via the environment variables LIBISCSI_CHAP_USERNAME and
       LIBISCSI_CHAP_PASSWORD.

       Host can	be specified either as a hostname, an IPv4 address or an IPv6
       address.	Examples:

		iscsi://192.0.2.1
		iscsi://[2001:DB8::1]:3261
		iscsi://ronnie%password@iscsi.example.com

       Port is the TCP port on the target to connect to. Default is 3260.

OPTIONS
       -i --initiator-name=<IQN>
	   This	specifies the initiator-name that iscsi-ls will	use when
	   logging in to the target.

	   The default name is
	   'iqn.2007-10.com.github:sahlberg:libiscsi:iscsi-ls' but you can use
	   this	argument to override this. This	is mainly needed for cases
	   where the target is configured with access-control to only allow
	   discovery logins from known initiator-names.

       -s --swp	{on|off}
	   By default iscsi-swp	will only print	the current setting of the
	   software write protect bit. By using	this argument iscsi-swp	will
	   also	try to set/clear the flag on the target	LUN.

	       iscsi-swp iscsi://127.0.0.1/iqn.ronnie.test/1
	       SWP:0

	       iscsi-swp iscsi://127.0.0.1/iqn.ronnie.test/1 --swp on
	       SWP:0
	       Turning SWP ON

	       iscsi-swp iscsi://127.0.0.1/iqn.ronnie.test/1 --swp off
	       SWP:0
	       Turning SWP OFF

       -d --debug=<INTEGER>
	   Debug level.

       -? --help
	   Display basic help text.

       --usage
	   Display basic usage text.

SEE ALSO
       iscsi-inq(1), iscsi-ls(1) http://github.com/sahlberg/libiscsi

iscsi-swp			  03/22/2014			  ISCSI-SWP(1)

NAME | SYNOPSIS | DESCRIPTION | ISCSI PORTAL URL FORMAT | OPTIONS | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=iscsi-swp&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help