Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
ISCSI-INQ(1)		 iscsi-inq: Perform INQUIRY on		  ISCSI-INQ(1)

NAME
       iscsi-inq - Utility to request INQUIRY data from	an iSCSI LUN

SYNOPSIS
       iscsi-inq [ OPTIONS ] <ISCSI-URL>

       iscsi-inq [-i --initiator-name=<IQN>] [-e --evpd=<INTEGER>]
		 [-c --pagecode=<INTEGER>] [-d --debug=<INTEGER>] [-? --help]
		 [--usage] [<ISCSI-URL>]

DESCRIPTION
       iscsi-inq is a utility to request INQUIRY data from an iSCSI LUN.

ISCSI URL FORMAT
       iSCSI URL format	is
       'iscsi://[<username>[%<password>]@]<host>[:<port>]/<target-iqn-name>/<lun>'

       Username	and password are only required if the target requires CHAP
       authentication. Optionally you can specify the username and password
       via the environment variables LIBISCSI_CHAP_USERNAME and
       LIBISCSI_CHAP_PASSWORD.

       Host can	be specified either as a hostname, an IPv4 address or an IPv6
       address.	Examples:

		iscsi://192.0.2.1/iqn.ronnie.test/1
		iscsi://[2001:DB8::1]:3261/iqn.ronnie.test/1
		iscsi://ronnie%password@iscsi.example.com/iqn.ronnie.test/1

       Port is the TCP port on the target to connect to. Default is 3260.

       Target-iqn-name is the iqn name of the target. An iSCSI portal can have
       multiple	targets	defined. Use iscsi-ls to list all targets available on
       one specific portal.

       LUN is the LUN number to	report the INQUIRY data	for.

OPTIONS
       -i --initiator-name=<IQN>
	   This	specifies the initiator-name that iscsi-inq will use when
	   logging in to the target.

	   The default name is
	   'iqn.2007-10.com.github:sahlberg:libiscsi:iscsi-inq'	but you	can
	   use this argument to	override this. This is mainly needed for cases
	   where the target is configured with access-control to only allow
	   discovery logins from known initiator-names.

       -e --evpd=<INTEGER>
	   By default iscsi-inq	will display the standard inquiry data.
	   Specify evpd	as 1 to	display	extended VPD pages.

       -c --pagecode=<INTEGER>
	   This	argument specifies which VPD page to display when evpd is
	   requested. Default is 0x00 which represents SUPPORTED VPD PAGES.

	   This	argument can only be used when evpd is set to 1.

       -d --debug=<INTEGER>
	   Debug level.

       -? --help
	   Display basic help text.

       --usage
	   Display basic usage text.

EXAMPLES
       To print	the standard INQUIRY page:

		iscsi-inq iscsi://192.0.2.1/iqn.ronnie.test/1

       To list available pages:

		iscsi-inq -e 1 iscsi://192.0.2.1/iqn.ronnie.test/1

       To show a specific page:

		iscsi-inq -e 1 -c 0x80 iscsi://192.0.2.1/iqn.ronnie.test/1

SEE ALSO
       iscsi-ls(1) http://github.com/sahlberg/libiscsi

iscsi-inq			  03/22/2014			  ISCSI-INQ(1)

NAME | SYNOPSIS | DESCRIPTION | ISCSI URL FORMAT | OPTIONS | EXAMPLES | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=iscsi-inq&sektion=1&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help