Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
IPAGGCREATE(1)							IPAGGCREATE(1)

NAME
       ipaggcreate - produce aggregate statistics of network traffic or	trace

SYNOPSIS
       ipaggcreate [-r | -i | --netflow-summary] [--src, --dst,	--sport,
       --dport,	...] [other options] [files or interfaces]

DESCRIPTION
       The ipaggcreate program reads IP	packets	from one or more data sources,
       maps each packet	to a label (such as "source address 192.4.10.9"	or
       "length 10"), and outputs a simply-formatted "aggregate"	file reporting
       the number of packets or	bytes observed per label.  The resulting file
       is easy to process with text-based tools.  (But see the --binary
       option, which generates a compressed, quick-to-process binary file.)

       Here are	a couple lines of ipaggcreate output, from `ipaggcreate	-s
       /home/kohler/largedump.gz':

	 !IPAggregate 1.0
	 !creator "src/ipaggcreate -s /home/kohler/largedump.gz"
	 !counts packets
	 !times	976937726.638704 977337361.804592 399635.165888
	 !num_nonzero 1437
	 !ip
	 4.2.49.2 1
	 4.2.49.4 1
	 4.17.143.9 1
	 4.21.203.29 104

       The `-s'	option,	which is equivalent to `--src',	tells ipaggcreate to
       categorize each packet by its source IP address.
       `/home/kohler/largedump.gz' is a	compressed tcpdump(1) file.  Each data
       line represents a label;	the first field	is the label number (here, an
       IP source address), and the second field	the number of packets that had
       that label.  Labels with	0 counts are not reported.

OPTIONS
   Data	Sources
       Data source options tell	ipaggcreate what kind of data source to	use:
       tcpdump(1) raw-packet files (--tcpdump),	live network interfaces
       (--interface), NetFlow summary files (--netflow-summary), ipsumdump
       output files (--ipsumdump), DAG or NLANR-formatted files	(--dag,
       --nlanr), or others.

       Non-option arguments specify the	files, or interfaces, to read. For
       example,	`ipaggcreate -r	eth0 eth1' will	read two tcpdump(1) files,
       named "eth0" and	"eth1";	`ipaggcreate -i	eth0 eth1' will	read from two
       live network interfaces,	"eth0" and "eth1".

       Options that read files read from the standard input when you supply a
       single dash "-" as a filename, or when you give no filenames at all.

       --tcpdump, -r
	   Read	from one or more files produced	by tcpdump(1)'s	-w option
	   (also known as "pcap	files"). Stop when all the files are
	   exhausted. This is the default. Files (except for standard input)
	   may be compressed by	gzip(1)	or bzip2(1); ipsumdump will uncompress
	   them	on the fly.

       --interface, -i
	   Read	from live network interfaces. When run this way, ipsumdump
	   will	continue until interrupted with	SIGINT or SIGHUP. When
	   stopped, ipsumdump appends a	comment	to its output file, indicating
	   how many packets were dropped by the	kernel before output.

       --ipsumdump
	   Read	from one or more ipsumdump files. Any packet characteristics
	   not specified by the	input files are	set to 0.

       --format=format
	   Read	from one or more ipsumdump files, using	the specified default
	   format.  The	format should be a space-separated list	of content
	   types; see ToIPSummaryDump(n) for a list.

       --dag[=encap]
	   Read	from one or more DAG-formatted trace files.  For new-style ERF
	   dumps, which	contain	encapsulation type information,	just say
	   --dag.  For old-style dumps,	you must supply	the right encap
	   argument: "ATM" for ATM RFC-1483 encapsulation (the most common),
	   "ETHER" for Ethernet, "PPP" for PPP,	"IP" for raw IP, "HDLC"	for
	   Cisco HDLC, "PPP_HDLC" for PPP HDLC,	or "SUNATM" for	Sun ATM.  See
	   <http://dag.cs.waikato.ac.nz/>.

       --nlanr
	   Read	from one or more NLANR-formatted trace files (fr, fr+, or tsh
	   format).  See <http://pma.nlanr.net/Traces/>.

       --ip-addresses
	   Read	files containing IP addresses, one address per line.  The
	   label must be either	--src or --dst.

       --tu-summary
	   Read	TCP/UDP	summary	files.	Each line represents one packet, and
	   carries the following information: timestamp, source	address,
	   source port,	destination address, destination port, protocol,
	   payload length.  For	example:

	     976937735.345744 18.26.4.9	22 64.55.139.202 26876 T 0
	     976937770.197008 128.10.5.110 63749 64.55.139.202 113 T 5

       --bro-conn-summary
	   Read	Bro connection summary files.  Each line represents one
	   connection attempt, and carries the following information:
	   timestamp, source address, destination address, direction
	   (inbound/outbound).

       --netflow-summary
	   Read	from one or more NetFlow summary files.	These are line-
	   oriented ASCII files; blank lines, and lines	starting with '!' or
	   '#',	are ignored. Other lines should	contain	15 or more fields
	   separated by	vertical bars '|'.  Ipsumdump pays attention to	some
	   of these fields:

	     Field  Meaning			  Example
	     -----  ----------------------------  ----------
	     0	    Source IP address		  192.4.1.32
	     1	    Destination	IP address	  18.26.4.44
	     5	    Packet count in flow	  5
	     6	    Byte count in flow		  10932
	     7	    Flow timestamp (UNIX-style)	  998006995
	     8	    Flow end timestamp		  998006999
	     9	    Source port			  3917
	     10	    Destination	port		  80
	     12	    TCP	flags (OR of all pkts)	  18
	     13	    IP protocol			  6
	     14	    IP TOS bits			  0

       --tcpdump-text
	   Read	from one or more files containing tcpdump(1) textual output.
	   It's	much better to use the binary files produced by	'tcpdump -w',
	   but if someone threw	those away and all you have is the ASCII
	   output, you can still make do.  Only	works with tcpdump versions
	   3.7 and earlier.

   Label
       These options determine how packets are labeled;	you can	supply at most
       one.

       --src, -s
	   Label by IP source address; all packets with	the same source
	   address form	an aggregate.

       --dst, -d
	   Label by IP destination address.  This is the default.

       --length, -l
	   Label by IP length.

       --ip field
	   Label by the	named IP field.	 Examples include "ip src" (equivalent
	   to --src), "ip ttl",	"ip off", "udp sport", and so forth.  See
	   AggregateIP(1) for a	full list.

       --flows
	   Label by TCP	or UDP flow, or, essentially, by end-to-end transport-
	   level connection.  Two packets have the same	label if and only if
	   they	are part of the	same TCP or UDP	connection.  Each flow is
	   assigned its	own label.  The	label number is	not meaningful;
	   non-TCP/UDP packets are ignored.

       --unidirectional-flows
	   Label by unidirectional TCP or UDP flow.  Like --flows, but packets
	   from	a single connection but	heading	in different directions	are
	   assigned different labels.

       --address-pairs
	   Label by address pair.  Two packets have the	same label if and only
	   if they involve the same pair of IP addresses.  The label number is
	   not meaningful.

       --unidirectional-address-pairs
	   Label by unidirectional address pair.  Two packets have the same
	   label if and	only if	their source addresses match and their
	   destination address match.

   Measurement Options
       These options specify whether ipaggcreate should	count packets or
       bytes.

       --packets
	   Count packets: the output file will report the number of packets
	   per label.  This is the default.

       --bytes,	-B
	   Count bytes:	the output file	will report the	number of bytes	per
	   label.  This	number includes	IP and transport headers, but not any
	   link	headers.

   Limit and Split Options
       These options select portions of	the trace file,	and allow the user to
       split trace data	into multiple aggregate	files.

       --time-offset=time, -T time
	   Ignore the first time worth of packets in the input trace.  If the
	   first packet	has timestamp T, then all packets (including the
	   first) with timestamp less than T+time are ignored.	The time
	   argument can	be an absolute number of seconds (938.42), or use
	   suffixes such as "100s", "12ms", "1.5min", "2hr", and so forth.

       --start-time=time
	   Ignore packets with timestamps less than time.

       --interval=time,	-t time
	   Stop	after recording	aggregate information for time worth of
	   packets.  That is, if the first recorded packet has timestamp T,
	   then	ipaggcreate will exit just before the first packet with
	   timestamp T+time, or	the end	of the trace, whichever	comes first.

       --limit-labels=count
	   Stop	after recording	information for	count distinct labels.	That
	   is, exit just before	encountering a packet with the count+1
	   different label, or at the end of the trace,	whichever comes	first.

       The four	--split	options	generate multiple aggregate output files based
       on characteristics of the input.	 To use	--split, you must supply an
       explicit	--output filename containing a "%d"-style template; a file
       number is plugged in to that template.  For example, the	template
       "file%03d.txt" will generate files "file001.txt", "file002.txt",	and so
       forth.

       --split-time=time
	   Start a new output file every time period.  That is,	each file will
	   contain data	for at most time worth of packets.

       --split-labels=count
	   Start a new output file every count distinct	labels.	 That is, each
	   file	will contain at	most count different labels.

       --split-packets=count
	   Start a new output file every count packets.

       --split-bytes=count
	   Start a new output file every count bytes.

   Other Options
       --output=file, -o file
	   Write the summary dump to file instead of to	the standard output.

       --binary, -b
	   Write the summary dump in binary format. See	below for more
	   information.

       --write-tcpdump=file, -w	file
	   Write processed packets to a	tcpdump(1) file	-- or to the standard
	   output, if file is a	single dash "-"	-- in addition to the usual
	   summary output.

       --filter=filter,	-f filter
	   Only	include	packets	and flows matching a tcpdump(1)	filter.	For
	   example, `ipsumdump -f "tcp && src net 18/8"' will summarize	data
	   only	for TCP	packets	from net 18. (The syntax for filter is
	   currently a subset of tcpdump's syntax.)

       --anonymize, -A
	   Anonymize IP	addresses in the output. The anonymization preserves
	   prefix and class. This means, first,	that two anonymized addresses
	   will	share the same prefix when their non-anonymized	counterparts
	   share the same prefix; and second, that anonymized addresses	will
	   be in the same class	(A, B, C, or D)	as their non-anonymized
	   counterparts. The anonymization algorithm comes from	tcpdpriv(1);
	   it works like `tcpdpriv -A50	-C4'.

	   If --anonymize and --write-tcpdump are both on, the tcpdump output
	   file	will have anonymized IP	addresses. However, the	file will
	   contain actual packet data, unlike tcpdpriv output.

       --no-promiscuous
	   Do not place	interfaces into	promiscuous mode. Promiscuous mode is
	   the default.

       --sample=p
	   Sample packets with probability p. That is, p is the	chance that a
	   packet will cause output to be generated. The actual	probability
	   may differ from the specified probability, due to fixed point
	   arithmetic; check the output	for a `"!sampling_prob"' comment to
	   see the real	probability.  Strictly speaking, this option samples
	   records, not	packets, so for	NetFlow	summaries without
	   --multipacket, it will sample flows.

       --multipacket
	   Supply this option if you are reading NetFlow or IP summaries --
	   files where each record might represent multiple packets -- and you
	   would like the output summary to have one line per packet, instead
	   of the default one line per record. See also	--packet-count,	above.

       --collate
	   Sort	output packets by increasing timestamp.	Use this option	when
	   reading from	multiple tcpdump(1) files to ensure that the output
	   has sorted timestamps. Combine --collate with --write-tcpdump to
	   collate overlapping tcpdump(1) files	into a single, sorted
	   tcpdump(1) file.

       --random-seed=seed
	   Set the random seed deterministically to seed, an unsigned integer.
	   By default, the random seed is initialized to a random value	using
	   /dev/random,	if it exists, combined with other data.	The random
	   seed	indirectly determines which packets are	sampled, and the
	   values of anonymized	IP addresses.

       --quiet,	-q
	   Do not print	a progress bar to standard error. This is the default
	   when	ipsumdump isn't	running	interactively.

       --config
	   Do not produce a summary. Instead, write the	Click configuration
	   that	ipsumdump would	run to the standard output.

       --verbose, -V
	   Produce more	verbose	error messages.

       --help, -h
	   Print a help	message	to the standard	output,	then exit.

       --version, -v
	   Print version number	and license information	to the standard
	   output, then	exit.

SIGNALS
       When killed with	SIGTERM	or SIGINT, ipaggcreate will exit cleanly (and
       generate	an output file).  If you want it to flush its buffers without
       exiting,	kill it	with SIGHUP.

BINARY FORMAT
       Binary ipaggcreate files	begin with several ASCII lines,	just like
       regular ipaggcreate files.  A line `"!packed_be"' or `"!packed_le"'
       indicates that the rest of the file, starting immediately after the
       newline,	consists of binary records (in big-endian or little-endian
       order, respectively).  Each record is 8 bytes long, and looks like
       this:

	  +---------------+---------------+
	  |	label	  |	count	  |
	  +---------------+---------------+
	   <---4 bytes---> <---4 bytes--->

       The initial word	of data	contains the label number, the second the
       count.

CLICK
       The ipaggcreate program uses the	Click modular router, an extensible
       system for processing packets.  Click routers consist of	C++ components
       called elements.	 While some elements run only in a Linux kernel, most
       can run either in the kernel or in user space, and there	are user-level
       elements	for reading packets from libpcap or from tcpdump files.

       Ipaggcreate creates and runs a user-level Click configuration.
       However,	you don't need to install Click	to run ipsumdump; the libclick
       directory contains all the relevant parts of Click, bundled into	a
       library.

       If you're curious, try running `ipaggcreate --config' with some other
       options to see the Click	configuration ipsumdump	would run.

       This is,	I think, a pleasant way	to write a packet processor!

SEE ALSO
       tcpdump(1), tcpdpriv(1),	click(1), ipsumdump(1)

       See http://www.pdos.csail.mit.edu/click/	for more on Click.

AUTHOR
       Eddie Kohler <kohler@cs.ucla.edu>, based	on the Click modular router.

       Anonymization algorithm from tcpdpriv(1)	by Greg	Minshall.

Version	1.86			  2014-05-02			IPAGGCREATE(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | SIGNALS | BINARY FORMAT | CLICK | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ipaggcreate&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help