Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
INTRO(4)		 BSD Kernel Interfaces Manual		      INTRO(4)

NAME
     intro -- introduction to devices and device drivers

DESCRIPTION
     This section contains information related to devices, device drivers and
     miscellaneous hardware.

   The device abstraction
     Device is a term used mostly for hardware-related stuff that belongs to
     the system, like disks, printers, or a graphics display with its key-
     board.  There are also so-called pseudo-devices where a device driver em-
     ulates the	behaviour of a device in software without any particular un-
     derlying hardware.	 A typical example for the latter class	is /dev/mem, a
     loophole where the	physical memory	can be accessed	using the regular file
     access semantics.

     The device	abstraction generally provides a common	set of system calls
     layered on	top of them, which are dispatched to the corresponding device
     driver by the upper layers	of the kernel.	The set	of system calls	avail-
     able for devices is chosen	from open(2), close(2),	read(2), write(2),
     ioctl(2), select(2), and mmap(2).	Not all	drivers	implement all system
     calls, for	example, calling mmap(2) on terminal devices is	likely to be
     not useful	at all.

   Accessing Devices
     Most of the devices in a UNIX-like	operating system are accessed through
     so-called device nodes, sometimes also called special files.  They	are
     usually located under the directory /dev in the file system hierarchy
     (see also hier(7)).

     Note that this could lead to an inconsistent state, where either there
     are device	nodes that do not have a configured driver associated with
     them, or there may	be drivers that	have successfully probed for their de-
     vices, but	cannot be accessed since the corresponding device node is
     still missing.  In	the first case,	any attempt to reference the device
     through the device	node will result in an error, returned by the upper
     layers of the kernel, usually ENXIO.  In the second case, the device node
     needs to be created before	the driver and its device will be usable.

     Some devices come in two flavors: block and character devices, or to use
     better terms, buffered and	unbuffered (raw) devices.  The traditional
     names are reflected by the	letters	`b' and	`c' as the file	type identifi-
     cation in the output of `ls -l'.  Buffered	devices	are being accessed
     through the buffer	cache of the operating system, and they	are solely in-
     tended to layer a file system on top of them.  They are normally imple-
     mented for	disks and disk-like devices only and, for historical reasons,
     for tape devices.

     Raw devices are available for all drivers,	including those	that also im-
     plement a buffered	device.	 For the latter	group of devices, the differ-
     entiation is conventionally done by prepending the	letter `r' to the path
     name of the device	node, for example /dev/rda0 denotes the	raw device for
     the first SCSI disk, while	/dev/da0 is the	corresponding device node for
     the buffered device.

     Unbuffered	devices	should be used for all actions that are	not related to
     file system operations, even if the device	in question is a disk device.
     This includes making backups of entire disk partitions, or	to raw floppy
     disks (i.e., those	used like tapes).

     Access restrictions to device nodes are usually subject to	the regular
     file permissions of the device node entry,	instead	of being enforced di-
     rectly by the drivers in the kernel.

   Drivers without device nodes
     Drivers for network devices do not	use device nodes in order to be	ac-
     cessed.  Their selection is based on other	decisions inside the kernel,
     and instead of calling open(2), use of a network device is	generally in-
     troduced by using the system call socket(2).

   Configuring a driver	into the kernel
     For each kernel, there is a configuration file that is used as a base to
     select the	facilities and drivers for that	kernel,	and to tune several
     options.  See config(8) for a detailed description	of the files involved.
     The individual manual pages in this section provide a sample line for the
     configuration file	in their synopsis portion.  See	also the sample	config
     file /sys/i386/conf/LINT (for the i386 architecture).

SEE ALSO
     close(2), ioctl(2), mmap(2), open(2), read(2), select(2), socket(2),
     write(2), devfs(5), hier(7), config(8)

HISTORY
     This manual page first appeared in	FreeBSD	2.1.

AUTHORS
     This man page has been written by Jorg Wunsch with	initial	input by David
     E.	O'Brien.

BSD			       January 20, 1996				   BSD

NAME | DESCRIPTION | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=intro&sektion=4&manpath=FreeBSD+10.1-RELEASE>

home | help