Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
Intro(1)                         User Commands                        Intro(1)

NAME
       Intro, intro - introduction to commands and application programs

DESCRIPTION
       This section describes, in alphabetical order, commands available with
       this operating system.

       Pages of special interest are categorized as follows:

       1B    Commands found only in the  SunOS/BSD Compatibility Package.

       1C    Commands for communicating with other systems.

       1F    Commands associated with  Form and Menu Language Interpreter
             (FMLI).

       1S    Commands specific to the SunOS system.

   OTHER SECTIONS
       See these sections of the  man pages section 1M: System Administration
       Commands for more information.

          o  Section 1M in this manual for system maintenance commands.

          o  Section 4 of this manual for information on file formats.

          o  Section 5 of this manual for descriptions of publicly available
             files  and miscellaneous information pages.

          o  Section 6 in this manual for computer demonstrations.

       For tutorial information about these commands and procedures, see:

          o  Solaris Advanced User's Guide

   Manual Page Command Syntax
       Unless otherwise noted, commands described in the SYNOPSIS section of a
       manual page accept options and other arguments according to the
       following syntax and should be interpreted as explained below.

       name [-option...] [cmdarg...] where:

       [ ]   Surround an option or cmdarg that is not required.

       ...   Indicates multiple occurrences of the option or cmdarg.

       name  The name of an executable file.

       { }   The options and/or arguments enclosed within braces are
             interdependent, such that everything enclosed must be treated as
             a unit.

       option
             (Always preceded by a "-".) noargletter... or, argletter
             optarg[,...]

       noargletter
             A single letter representing an option without an option-
             argument.  Note that more than one noargletter option can be
             grouped after one "-" (Rule 5, below).

       argletter
             A single letter representing an option requiring an option-
             argument.

       optarg
             An option-argument (character string) satisfying a preceding
             argletter. Note that groups of optargs following an argletter
             must be separated by commas, or separated by a tab or space
             character and quoted (Rule 8, below).

       cmdarg
             Path name (or other command argument) not beginning with "-", or
             "-" by itself indicating the standard input.

   Command Syntax Standard: Rules
       These command syntax rules are not followed by all current commands,
       but all new commands will obey them. getopts(1) should be used by all
       shell procedures to parse positional parameters  and to check for legal
       options. It supports Rules 3-10 below. The enforcement of the other
       rules must be done by the command itself.

       1. Command names (name above) must be between two and nine characters
          long.

       2. Command names must include only lower-case letters and digits.

       3. Option names (option above) must be one character long.

       4. All options must be preceded by "-".

       5. Options with no arguments may be grouped after a single "-".

       6. The first option-argument (optarg above) following an option must be
          preceded by a tab or space character.

       7. Option-arguments cannot be optional.

       8. Groups of option-arguments following an option must either be
          separated by commas or separated by tab or space character and
          quoted (-o xxx,z,yy or - o "xxx z yy").

       9. All options must precede operands (cmdarg above) on the command
          line.

       10.
          "--" may be used to indicate the end of the options.

       11.
          The order of the options relative to one another should not matter.

       12.
          The relative order of the operands (cmdarg above) may affect their
          significance in ways determined by the command with which they
          appear.

       13.
          "-" preceded and followed by a space character should only be used
          to mean standard input.

ATTRIBUTES
       See attributes(5) for a discussion of the attributes listed in this
       section.

SEE ALSO
       getopts(1), wait(1), exit(2), getopt(3C), wait(3UCB), attributes(5)

DIAGNOSTICS
       Upon termination, each command returns two bytes of status, one
       supplied by the system and giving the cause for termination, and (in
       the case of "normal" termination) one supplied by the program [see
       wait(3UCB) and exit(2)]. The former byte is 0 for normal termination;
       the latter is customarily 0 for successful execution and non-zero to
       indicate troubles such as erroneous parameters, or bad or inaccessible
       data. It is called variously "exit code", "exit status", or "return
       code", and is described only where special conventions are involved.

WARNINGS
       Some commands produce unexpected results when processing files
       containing null characters. These commands often treat text input lines
       as strings and therefore become confused upon encountering a null
       character (the string terminator)  within a line.

LIST OF COMMANDS
       Name  Description

       GFXconfig(1M)
             See pgxconfig(1M)

       Intro(1M)
             introduction to maintenance commands and application programs

       Mail(1B)
             See mail(1B)

       NIS+(1)
             See nis+(1)

       SUNWafb_config(1M)
             See afbconfig(1M)

       SUNWffb_config(1M)
             See ffbconfig(1M)

       SUNWgfb_config(1M)
             fbconfig module for configuring Sun XVR-1000 Graphics Accelerator

       SUNWifb_config(1M)
             configure the Sun Expert3D Graphics Accelerator

       SUNWm64_config(1M)
             See m64config(1M)

       Uutry(1M)
             attempt to contact remote system with debugging on

       accept(1M)
             accept or reject print requests

       acct(1M)
             overview of accounting and miscellaneous accounting commands

       acctadm(1M)
             configure extended accounting facility

       acctcms(1M)
             command summary from process accounting records

       acctcom(1)
             search and print process accounting files

       acctcon(1M)
             connect-time accounting

       acctcon1(1M)
             See acctcon(1M)

       acctcon2(1M)
             See acctcon(1M)

       acctdisk(1M)
             See acct(1M)

       acctdusg(1M)
             See acct(1M)

       acctmerg(1M)
             merge or add total accounting files

       accton(1M)
             See acct(1M)

       acctprc(1M)
             process accounting

       acctprc1(1M)
             See acctprc(1M)

       acctprc2(1M)
             See acctprc(1M)

       acctsh(1M)
             shell procedures for accounting

       acctwtmp(1M)
             See acct(1M)

       adb(1)
             general-purpose debugger

       adbgen(1M)
             generate adb script

       add_drv(1M)
             add a new device driver to the system

       add_install_client(1M)
             See install_scripts(1M)

       add_to_install_server(1M)
             See install_scripts(1M)

       addbadsec(1M)
             map out defective disk blocks

       addbib(1)
             create or extend a bibliographic database

       admin(1)
             See sccs-admin(1)

       admintool(1M)
             system administration with a graphical user interface

       aedplot(1B)
             See plot(1B)

       afbconfig(1M)
             configure the AFB Graphics Accelerator

       alias(1)
             create or remove a pseudonym or shorthand for a command or series
             of commands

       aliasadm(1M)
             manipulate the NIS+ aliases map

       allocate(1)
             device allocation

       amt(1)
             run abstract machine test

       answerbook2(1)
             online documentation system

       answerbook2_admin(1M)
             bring up AnswerBook2 administration tool GUI

       apache(1M)
             Apache hypertext transfer protocol server overview

       appcert(1)
             examine application-level products for unstable use of Solaris
             interfaces

       apptrace(1)
             trace application function calls to Solaris shared libraries

       apropos(1)
             locate commands by keyword lookup

       ar(1) maintain portable archive or library

       arch(1)
             display the architecture of the current host

       arp(1M)
             address resolution display and control

       as(1) assembler

       asa(1)
             convert FORTRAN carriage-control output to printable form

       aset(1M)
             monitors or restricts accesses to system files and directories

       aset.restore(1M)
             restores system files to their content before ASET is installed

       at(1) execute commands at a later time

       atoplot(1B)
             See plot(1B)

       atq(1)
             display the jobs queued to run at specified times

       atrm(1)
             remove jobs spooled by at or batch

       audioconvert(1)
             convert audio file formats

       audioplay(1)
             play audio files

       audiorecord(1)
             record an audio file

       audit(1M)
             control the behavior of the audit daemon

       audit_startup(1M)
             audit subsystem initialization script

       audit_warn(1M)
             audit daemon warning script

       auditconfig(1M)
             configure auditing

       auditd(1M)
             audit daemon

       auditreduce(1M)
             merge and select audit records from audit trail files

       auditstat(1M)
             display kernel audit statistics

       auths(1)
             print authorizations granted to a user

       automount(1M)
             install automatic mount points

       automountd(1M)
             autofs mount/unmount daemon

       autopush(1M)
             configures lists of automatically pushed STREAMS modules

       awk(1)
             pattern scanning and processing language

       banner(1)
             make posters

       basename(1)
             deliver portions of path names

       basename(1B)
             display portions of pathnames

       batch(1)
             See at(1)

       bc(1) arbitrary precision arithmetic language

       bdconfig(1M)
             configures the bd (buttons and dials) stream

       bdiff(1)
             big diff

       bfs(1)
             big file scanner

       bg(1) See jobs(1)

       bgplot(1B)
             See plot(1B)

       biff(1B)
             give notice of incoming mail messages

       boot(1M)
             start the system kernel or a standalone program

       bootparamd(1M)
             See rpc.bootparamd(1M)

       break(1)
             shell built-in functions to escape from or advance within a
             controlling while, for, foreach, or until  loop

       bsmconv(1M)
             enable or disable the Basic Security Module (BSM) on Solaris

       bsmrecord(1M)
             display Basic Security Module (BSM) audit record formats

       bsmunconv(1M)
             See bsmconv(1M)

       busstat(1M)
             report bus-related performance statistics

       cachefsd(1M)
             CacheFS daemon

       cachefslog(1M)
             Cache File System logging

       cachefspack(1M)
             pack files and file systems in the cache

       cachefsstat(1M)
             Cache File System statistics

       cachefswssize(1M)
             determine working set size for cachefs

       cal(1)
             display a calendar

       calendar(1)
             reminder service

       cancel(1)
             cancel print request

       captoinfo(1M)
             convert a termcap description into a terminfo description

       case(1)
             See shell_builtins(1)

       cat(1)
             concatenate and display files

       catman(1M)
             create the formatted files for the reference manual

       cc(1B)
             C compiler

       cd(1) change working directory

       cdc(1)
             See sccs-cdc(1)

       cdrw(1)
             CD read and write

       cfgadm(1M)
             configuration administration

       cfgadm_ac(1M)
             EXX00 memory system administration

       cfgadm_pci(1M)
             PCI Hotplug hardware specific commands for cfgadm

       cfgadm_sbd(1M)

       cfgadm_scsi(1M)
             SCSI hardware specific commands for cfgadm

       cfgadm_sysctrl(1M)
             EXX00 system board administration

       cfgadm_usb(1M)
             USB hardware-specific commands for cfgadm

       cfsadmin(1M)
             administer disk space used for caching file systems with the
             Cache File-System (CacheFS)

       cg14config(1M)
             configure the cgfourteen device

       chargefee(1M)
             See acctsh(1M)

       chat(1M)
             automated conversational exchange tool

       chdir(1)
             See cd(1)

       check-hostname(1M)
             check if sendmail can determine the system's  fully-qualified
             host name

       check-permissions(1M)
             check permissions on mail rerouting files

       check(1M)
             See install_scripts(1M)

       checkeq(1)
             See eqn(1)

       checknr(1)
             check nroff and troff input files; report possible errors

       chgrp(1)
             change file group ownership

       chkey(1)
             change user's secure RPC key pair

       chmod(1)
             change the permissions mode of a file

       chown(1)
             change file ownership

       chown(1B)
             change owner

       chown(1M)
             change owner

       chroot(1M)
             change root directory for a command

       cimworkshop(1M)
             start the Sun WBEM CIM WorkShop application

       ckdate(1)
             prompts for and validates a date

       ckgid(1)
             prompts for and validates a group id

       ckint(1)
             display a prompt; verify and return an integer value

       ckitem(1)
             build a menu; prompt for and return a menu item

       ckkeywd(1)
             prompts for and validates a keyword

       ckpacct(1M)
             See acctsh(1M)

       ckpath(1)
             display a prompt; verify and return a pathname

       ckrange(1)
             prompts for and validates an integer

       ckstr(1)
             display a prompt; verify and return a string answer

       cksum(1)
             write file checksums and sizes

       cktime(1)
             display a prompt; verify and return a time of day

       ckuid(1)
             prompts for and validates a user ID

       ckyorn(1)
             prompts for and validates yes/no

       clear(1)
             clear the terminal screen

       clear_locks(1M)
             clear locks held on behalf of an NFS client

       clinfo(1M)
             display cluster information

       closewtmp(1M)
             See acct(1M)

       clri(1M)
             clear inode

       cmp(1)
             compare two files

       cocheck(1F)
             See coproc(1F)

       cocreate(1F)
             See coproc(1F)

       codestroy(1F)
             See coproc(1F)

       col(1)
             reverse line-feeds filter

       comb(1)
             See sccs-comb(1)

       comm(1)
             select or reject lines common to two files

       command(1)
             execute a simple command

       compress(1)
             compress, uncompress files or display expanded files

       comsat(1M)
             See in.comsat(1M)

       consadm(1m)
             select or display devices used as auxiliary console devices

       continue(1)
             See break(1)

       conv_lp(1M)
             convert LP configuration

       conv_lpd(1M)
             convert LPD configuration

       coproc(1F)
             communicate with a process

       coreadm(1M)
             core file administration

       coreceive(1F)
             See coproc(1F)

       cosend(1F)
             See coproc(1F)

       cp(1) copy files

       cpio(1)
             copy file archives in and out

       cpp(1)
             the C language preprocessor

       cpustat(1M)
             monitor system behavior using CPU performance counters

       cputrack(1)
             monitor process and LWP behavior using CPU performance counters

       crle(1)
             configure runtime linking environment

       cron(1M)
             clock daemon

       crontab(1)
             user crontab file

       crtplot(1B)
             See plot(1B)

       crypt(1)
             encode or decode a file

       csh(1)
             shell command interpreter with a C-like syntax

       csplit(1)
             split  files based on context

       ct(1C)
             spawn login to a remote terminal

       ctags(1)
             create a tags file for use with ex and vi

       cu(1C)
             call another UNIX system

       cut(1)
             cut out selected fields of each line of a file

       cvcd(1M)
             virtual console daemon

       date(1)
             write the date and time

       dc(1) desk calculator

       dcopy(1M)
             See clri(1M)

       dcs(1M)
             domain configuration server

       dd(1M)
             convert and copy a file

       deallocate(1)
             device deallocation

       delta(1)
             See sccs-delta(1)

       deroff(1)
             remove nroff/troff, tbl, and eqn constructs

       devattr(1M)
             display device attributes

       devfree(1M)
             release devices from exclusive use

       devfsadm(1M)
             administration command for /dev and /devices

       devfsadmd(1M)
             See devfsadm(1M)

       devinfo(1M)
             print device specific information

       devlinks(1M)
             adds /dev entries for miscellaneous devices and pseudo-devices

       devnm(1M)
             device name

       devreserv(1M)
             reserve devices for exclusive use

       df(1B)
             display status of disk space on file systems

       df(1M)
             displays number of free disk blocks and files

       df_ufs(1M)
             report free disk space on ufs file systems

       dfmounts(1M)
             display mounted resource information

       dfmounts_nfs(1M)
             display mounted NFS resource information

       dfshares(1M)
             list available resources from remote or local systems

       dfshares_nfs(1M)
             list available NFS resources from remote systems

       dhcpagent(1M)
             Dynamic Host Configuration Protocol (DHCP) client daemon

       dhcpconfig(1M)
             DHCP service configuration utility

       dhcpinfo(1)
             display values of parameters received through DHCP

       dhcpmgr(1M)
             graphical interface for managing DHCP service

       dhtadm(1M)
             DHCP configuration table management utility

       diff(1)
             compare two files

       diff3(1)
             3-way differential file comparison

       diffmk(1)
             mark differences between versions of a troff input file

       dig(1M)
             send domain name query packets to name servers

       digestp(1)
             See mailp(1)

       dircmp(1)
             directory comparison

       directoryserver(1M)
             front end for the Directory Se

       dirname(1)
             See basename(1)

       dirs(1)
             See cd(1)

       dis(1)
             object code disassembler

       disable(1)
             See enable(1)

       disks(1M)
             creates /dev entries for hard disks attached to the system

       diskscan(1M)
             perform surface analysis

       dispadmin(1M)
             process scheduler administration

       dispgid(1)
             displays a list of all valid group names

       dispuid(1)
             displays a list of all valid user names

       dmesg(1M)
             collect system diagnostic messages to form error log

       dmi_cmd(1M)
             DMI command line interface utility

       dmiget(1M)
             DMI command line retrieval utility

       dminfo(1M)
             report information about a device entry in a device maps file

       dmispd(1M)
             Sun Solstice Enterprise DMI Service Provider

       dnskeygen(1M)
             generate public, private, and shared secret keys for DNS

       dodisk(1M)
             See acctsh(1M)

       domainname(1M)
             Set or display name of the current domain

       dos2unix(1)
             convert text file from DOS format to ISO format

       download(1)
             host resident PostScript font downloader

       dpost(1)
             troff postprocessor for PostScript printers

       drvconfig(1M)
             configure the /devices directory

       dsvclockd(1M)
             DHCP service lock daemon

       du(1) summarize disk usage

       du(1B)
             display the number of disk blocks used per directory or file

       dumbplot(1B)
             See plot(1B)

       dump(1)
             dump selected parts of an object file

       dumpadm(1M)
             configure operating system crash dump

       dumpcs(1)
             show codeset table for the current locale

       dumpkeys(1)
             See loadkeys(1)

       echo(1)
             echo arguments

       echo(1B)
             echo arguments to standard output

       echo(1F)
             put string on virtual output

       ed(1) text editor

       edit(1)
             text editor (variant of ex for casual users)

       editmap(1M)
             query and edit single records in database maps for sendmail

       edquota(1M)
             edit user quotas for ufs file system

       eeprom(1M)
             EEPROM display and load utility

       efdaemon(1M)
             embedde

       egrep(1)
             search a file for a pattern using full regular expressions

       eject(1)
             eject media such as CD-ROM and floppy from drive

       elfdump(1)
             dump selected parts of an object file

       enable(1)
             enable/disable LP printers

       env(1)
             set environment for command invocation

       eqn(1)
             typeset mathematics test

       errange(1)
             See ckrange(1)

       errdate(1)
             See ckdate(1)

       errgid(1)
             See ckgid(1)

       errint(1)
             See ckint(1)

       erritem(1)
             See ckitem(1)

       error(1)
             insert compiler error messages at right source lines

       errpath(1)
             See ckpath(1)

       errstr(1)
             See ckstr(1)

       errtime(1)
             See cktime(1)

       erruid(1)
             See ckuid(1)

       erryorn(1)
             See ckyorn(1)

       etrn(1M)
             start mail queue run

       eval(1)
             See exec(1)

       ex(1) text editor

       exec(1)
             shell built-in functions to execute other commands

       exit(1)
             shell built-in functions to enable the execution of the shell to
             advance beyond its sequence of steps

       expand(1)
             expand TAB characters to SPACE characters, and vice versa

       export(1)
             See set(1)

       exportfs(1B)
             translates exportfs options to share/unshare commands

       expr(1)
             evaluate arguments as an expression

       expr(1B)
             evaluate arguments as a logical, arithmetic, or string expression

       exstr(1)
             extract strings from source files

       face(1)
             executable for the Framed Access Command Environment Interface

       factor(1)
             obtain the prime factors of a number

       false(1)
             See true(1)

       fastboot(1B)
             reboot/halt the system without checking the disks

       fasthalt(1B)
             See fastboot(1B)

       fbconfig(1M)
             Frame Buffer configuration utility

       fc(1) See history(1)

       fdetach(1M)
             detach a name from a STREAMS-based file descriptor

       fdformat(1)
             format floppy diskette or PCMCIA memory card

       fdisk(1M)
             create or modify fixed disk partition table

       ff(1M)
             list file names and statistics for a file system

       ff_ufs(1M)
             list file names and statistics for a ufs file system

       ffbconfig(1M)
             configure the FFB Graphics Accelerator

       fg(1) See jobs(1)

       fgrep(1)
             search a file for a fixed-character string

       file(1)
             determine file type

       file(1B)
             determine the type of a file by examining its contents

       filep(1)
             See mailp(1)

       filesync(1)
             synchronize ordinary, directory or special files

       filofaxp(1)
             See mailp(1)

       find(1)
             find files

       finger(1)
             display information about local and remote users

       fingerd(1M)
             See in.fingerd(1M)

       flar(1M)
             administer flash archives

       flarcreate(1M)
             create a flash archive from a master system

       fmlcut(1F)
             cut out selected fields of each line of a file

       fmlexpr(1F)
             evaluate arguments as an expression

       fmlgrep(1F)
             search a file for a pattern

       fmli(1)
             invoke FMLI

       fmt(1)
             simple text formatters

       fmthard(1M)
             populate VTOC on hard disks

       fmtmsg(1)
             display a message on stderr or system console

       fnattr(1)
             update and examine attributes associated with an FNS named object

       fnbind(1)
             Bind a reference to an FNS name

       fncheck(1M)
             check for consistency between FNS data and NIS+ data

       fncopy(1M)
             copy FNS contexts, possibly from one naming service to another
             naming service

       fncreate(1M)
             create an FNS context

       fncreate_fs(1M)
             create FNS file system contexts

       fncreate_printer(1M)
             create new printers in the FNS namespace

       fndestroy(1M)
             destroy an FNS context

       fnlist(1)
             display the names and references bound in an FNS context

       fnlookup(1)
             display the reference bound to an FNS name

       fnrename(1)
             rename the binding of an FNS name

       fnsearch(1)
             search for FNS objects with specified attributes

       fnselect(1M)
             select a specific naming service to use for the FNS Initial
             Context

       fnsypd(1M)
             update FNS context on an NIS master server

       fnunbind(1)
             unbind the reference from an FNS name

       fold(1)
             filter for folding lines

       for(1)
             See shell_builtins(1)

       foreach(1)
             See shell_builtins(1)

       format(1M)
             disk partitioning and maintenance utility

       franklinp(1)
             See mailp(1)

       from(1B)
             display the sender and date of newly-arrived mail messages

       fsck(1M)
             check and repair file systems

       fsck_cachefs(1M)
             check integrity of data cached with CacheFS

       fsck_pcfs(1M)
             file system consistency check and interactive repair

       fsck_udfs(1M)
             file system consistency check and interactive repair

       fsck_ufs(1M)
             file system consistency check and interactive repair

       fsdb(1M)
             file system debugger

       fsdb_udfs(1M)
             udfs file system debugger

       fsdb_ufs(1M)
             ufs file system debugger

       fsirand(1M)
             install random inode generation numbers

       fssnap(1M)
             create temporary snapshots of a file system

       fssnap_ufs(1M)
             create a temporary snapshot of a UFS file system

       fstyp(1M)
             determine file system type

       ftp(1)
             file transfer program

       ftpaddhost(1M)
             set up a virtual FTP host

       ftpconfig(1M)
             set up anonymous FTP

       ftpcount(1)
             show current number of users in each FTP Server class

       ftpd(1M)
             See in.ftpd(1M)

       ftprestart(1M)
             restart previously shutdown FTP Servers

       ftpshut(1M)
             close down the FTP Servers at a given time

       ftpwho(1)
             show current process information for each FTP Server user

       function(1)
             See shell_builtins(1)

       fuser(1M)
             identify processes using a file or file structure

       fwtmp(1M)
             manipulate connect accounting records

       gcore(1)
             get core images of running processes

       gencat(1)
             generate a formatted message catalog

       geniconvtbl(1)
             generate iconv code conversion tables

       genlayouttbl(1)
             generate layout table for complex text layout

       genmsg(1)
             generate a message source file by extracting messages from source
             files

       get(1)
             See sccs-get(1)

       getconf(1)
             get configuration values

       getdev(1M)
             lists devices based on criteria

       getdgrp(1M)
             lists device groups which contain devices that match criteria

       getent(1M)
             get entries from administrative database

       getfacl(1)
             display discretionary file information

       getfrm(1F)
             returns the current frameID number

       getitems(1F)
             returns a list of currently marked menu items

       getopt(1)
             parse command options

       getoptcvt(1)
             convert to getopts to parse command options

       getopts(1)
             parse utility options

       gettable(1M)
             get DoD Internet format host table from a host

       gettext(1)
             retrieve text string from message database

       gettxt(1)
             retrieve a text string from a message database

       getty(1M)
             set terminal type, modes, speed, and line discipline

       getvol(1M)
             verifies device accessibility

       gigiplot(1B)
             See plot(1B)

       gkadmin(1M)
             Kerberos database administration GUI, SEAM Administration Tool

       glob(1)
             shell built-in function to expand a word list

       goto(1)
             See exit(1)

       gprof(1)
             display call-graph profile data

       graph(1)
             draw a graph

       grep(1)
             search a file for a pattern

       groupadd(1M)
             add (create) a new group definition on the system

       groupdel(1M)
             delete a group definition from the system

       groupmod(1M)
             modify a group definition on the system

       groups(1)
             print group membership of user

       groups(1B)
             display a user's group memberships

       growfs(1M)
             non-destructively expand a UFS file system

       grpck(1B)
             check group database entries

       grpck(1M)
             See pwck(1M)

       gsscred(1M)
             add, remove and list gsscred table entries

       gssd(1M)
             generates and validates GSS-API tokens for kernel RPC

       halt(1M)
             stop the processor

       hash(1)
             evaluate the internal hash table of the   contents of directories

       hashcheck(1)
             See spell(1)

       hashmake(1)
             See spell(1)

       hashstat(1)
             See hash(1)

       head(1)
             display first few lines of files

       help(1)
             See sccs-help(1)

       helpdate(1)
             See ckdate(1)

       helpgid(1)
             See ckgid(1)

       helpint(1)
             See ckint(1)

       helpitem(1)
             See ckitem(1)

       helppath(1)
             See ckpath(1)

       helprange(1)
             See ckrange(1)

       helpstr(1)
             See ckstr(1)

       helptime(1)
             See cktime(1)

       helpuid(1)
             See ckuid(1)

       helpyorn(1)
             See ckyorn(1)

       history(1)
             process command history list

       hostconfig(1M)
             configure a system's host parameters

       hostid(1)
             print the numeric identifier of the current host

       hostname(1)
             set or print name of current host system

       hp7221plot(1B)
             See plot(1B)

       hpplot(1B)
             See plot(1B)

       htable(1M)
             convert DoD Internet format host table

       i286(1)
             See machid(1)

       i386(1)
             See machid(1)

       i486(1)
             See machid(1)

       i860(1)
             See machid(1)

       iAPX286(1)
             See machid(1)

       iconv(1)
             code set conversion utility

       id(1M)
             return user identity

       idsconfig(1M)
             prepare an iPlanet Directory Server (iDS) to be populated with
             data and serve LDAP clients

       if(1) See shell_builtins(1)

       if_mpadm(1M)
             change operational status of interfaces within a multipathing
             group

       ifconfig(1M)
             configure network interface parameters

       ifparse(1M)
             parse

       ikeadm(1M)
             manipulate Internet Key Exchange (IKE) parameters and state

       ikecert(1M)
             manipulates the machine's on-filesystem public-key certificate
             databases

       implot(1B)
             See plot(1B)

       in.comsat(1M)
             biff server

       in.dhcpd(1M)
             Dynamic Host Configuration Protocol server

       in.fingerd(1M)
             remote user information server

       in.ftpd(1M)
             File Transfer Protocol Server

       in.iked(1M)
             daemon for the Internet Key Exchange (IKE)

       in.lpd(1M)
             BSD print protocol adaptor

       in.mpathd(1M)
             daemon for network adapter (

       in.named(1M)
             Internet domain name server (DNS)

       in.ndpd(1M)
             daemon for IPv6 autoconfiguration

       in.rarpd(1M)
             DARPA Reverse Address Resolution Protocol server

       in.rdisc(1M)
             network router discovery daemon

       in.rexecd(1M)
             remote execution server

       in.ripngd(1M)
             network routing daemon for IPv6

       in.rlogind(1M)
             remote login server

       in.routed(1M)
             network routing daemon

       in.rshd(1M)
             remote shell server

       in.rwhod(1M)
             system status server

       in.talkd(1M)
             server for talk program

       in.telnetd(1M)
             DARPA TELNET protocol server

       in.tftpd(1M)
             Internet Trivial File Transfer Protocol server

       in.tnamed(1M)
             DARPA trivial name server

       in.uucpd(1M)
             UUCP server

       indicator(1F)
             display application specific alarms and/or the "working"
             indicator

       indxbib(1)
             create an inverted index to a bibliographic database

       inetd(1M)
             Internet services daemon

       infocmp(1M)
             compare or print out terminfo descriptions

       init(1M)
             process control initialization

       init.wbem(1M)
             start and stop the CIM Boot Manager

       install(1B)
             install files

       install(1M)
             install commands

       install_scripts(1M)
             scripts used to install the Solaris software

       installboot(1M)
             install bootblocks in a disk partition

       installer(1M)
             Solaris Web Start installer utility

       installf(1M)
             add a file to the software installation database

       intro(1M)
             See Intro(1M)

       iostat(1M)
             report I/O statistics

       ipcrm(1)
             remove a message queue, semaphore set, or shared memory ID

       ipcs(1)
             report inter-process communication facilities status

       ipsecconf(1M)
             configure system wide IPsec policy

       ipseckey(1M)
             manually manipulate an IPsec Security Association Database (SADB)

       isainfo(1)
             describe instruction set architectures

       isalist(1)
             display the native instruction sets executable on this platform

       jobs(1)
             control process execution

       join(1)
             relational database operator

       jsh(1)
             See sh(1)

       kadb(1M)
             a kernel debugger

       kadmin(1M)
             Kerberos database administration program

       kadmin.local(1M)
             See kadmin(1M)

       kadmind(1M)
             Kerberos administration daemon

       kbd(1)
              manipulate the state of keyboard, or display the type of
             keyboard, or change the default keyboard abort sequence effect

       kdb5_util(1M)
             Kerberos Database maintenance utility

       kdestroy(1)
             destroy Kerberos tickets

       kdmconfig(1M)
             configure or unconfigure keyboard, display, and mouse options for
             OpenWindows and internationalization

       kernel(1M)
             UNIX system executable file containing basic operating system
             services

       keylogin(1)
             decrypt and store secret key with keyserv

       keylogout(1)
             delete stored secret key with keyserv

       keyserv(1M)
             server for storing private encryption keys

       kill(1)
             terminate or signal processes

       killall(1M)
             kill all active processes

       kinit(1)
             obtain and cache Kerberos ticket-granting ticket

       klist(1)
             list currently held Kerberos tickets

       kpasswd(1)
             change a user's Kerberos password

       kprop(1M)
             Kerberos database propagation program

       krb5kdc(1M)
             KDC daemon

       ksh(1)
             KornShell, a standard/restricted command and programming language

       kstat(1M)
             display kernel statistics

       ktkt_warnd(1M)
             Kerberos warning daemon

       ktutil(1)
             Kerberos keytab maintenance utility

       labelit(1M)
             list or provide labels for file systems

       labelit_hsfs(1M)
             provide and print labels for hsfs file systems

       labelit_udfs(1M)
             provide and print labels for udf file systems

       labelit_ufs(1M)
             provide and print labels for ufs file systems

       last(1)
             display login and logout information about users and terminals

       lastcomm(1)
             display the last commands executed, in reverse order

       lastlogin(1M)
             See acctsh(1M)

       ld(1) link-editor for object files

       ld(1B)
             link editor, dynamic link editor

       ld.so.1(1)
             runtime linker for dynamic objects

       ldap(1)
             LDAP as a naming repository

       ldap_cachemgr(1M)
             LDAP daemon to manage client configuration for LDAP based Network
             Information Service lookups

       ldapadd(1)
             See ldapmodify(1)

       ldapaddent(1M)
             create LDAP entries from corresponding /etc files

       ldapclient(1M)
             initialize LDAP client machine or output an LDAP client profile
             in LDIF format

       ldapdelete(1)
             ldap delete entry tool

       ldaplist(1)
             search and list naming information  from  a  LDAP directory using
             the configured profile

       ldapmodify(1)
             ldap entry addition and modification tools

       ldapmodrdn(1)
             ldap modify entry RDN tool

       ldapsearch(1)
             ldap search tool

       ldd(1)
             list dynamic dependencies of executable files or shared objects

       let(1)
             shell built-in function to evaluate one or more arithmetic
             expressions

       lex(1)
             generate programs for lexical tasks

       limit(1)
             set or get limitations on the system resources available to the
             current shell and its descendents

       line(1)
             read one line

       link(1M)
             link and unlink files and directories

       lint(1B)
             C program verifier

       list_devices(1)
             list allocatable devices

       listdgrp(1M)
             lists members of a device group

       listen(1M)
             network listener daemon

       listusers(1)
             list user login information

       llc2_autoconfig(1)
             generate LLC2 configuration files

       llc2_config(1)
             configure LLC2 interface parameters

       llc2_loop(1M)
             loopback diagnostics to test the driver, adapter and network.

       llc2_stats(1)
             LLC2 Station, SAP, and Connection Statistics

       ln(1) make hard or symbolic links to files

       ln(1B)
             make hard or symbolic links to files

       loadkeys(1)
             load and dump keyboard translation tables

       locale(1)
             get locale-specific information

       localedef(1)
             define locale environment

       locator(1M)
             location indicator control

       lockd(1M)
             network lock daemon

       lockfs(1M)
             change or report file system locks

       lockstat(1M)
             report kernel lock and profiling statistics

       lofiadm(1M)
             administer files available as block devices through lofi

       logadm(1M)
             manage endlessly growing log files

       logger(1)
             add entries to the system log

       logger(1B)
             add entries to the system log

       login(1)
             sign on to the system

       logins(1M)
             list user and system login information

       logname(1)
             return user's login name

       logout(1)
             shell built-in function to exit from a login session

       longline(1F)
             See readfile(1F)

       look(1)
             find words in the system dictionary or lines in a sorted list

       lookbib(1)
             find references in a bibliographic database

       lorder(1)
             find ordering relation for an object or library archive

       lp(1) submit print request

       lpadmin(1M)
             configure the LP print service

       lpc(1B)
             line printer control program

       lpfilter(1M)
             administer filters used with the LP print service

       lpforms(1M)
             administer forms used with the LP print service

       lpget(1M)
             get printing configuration

       lpmove(1M)
             move print requests

       lpq(1B)
             display the content of a print queue

       lpr(1B)
             submit print requests

       lprm(1B)
             remove print requests from the print queue

       lpsched(1M)
             start the LP print service

       lpset(1M)
             set printing configuration in /etc/printers.conf or other
             supported databases

       lpshut(1M)
             stop the LP print service

       lpstat(1)
             print information about the status of the print service

       lpsystem(1M)
             register remote systems with the print service

       lptest(1B)
             generate line printer ripple pattern

       lpusers(1M)
             set printing queue priorities

       ls(1) list contents of directory

       ls(1B)
             list the contents of a directory

       lu(1M)
             FMLI-based interface to Live Upgrade functions

       luactivate(1M)
             activate a boot environment

       lucancel(1M)
             cancel a scheduled Live Upgrade copy/create procedure

       lucompare(1M)
             compare boot environments

       lucreate(1M)
             create a new boot environment

       lucurr(1M)
             display the name of the active boot environment

       ludelete(1M)
             delete a boot environment

       ludesc(1M)
             display or set boot environment description

       lufslist(1M)
             list configuration of a boot environment

       lumake(1M)
             populate a boot environment

       lumount(1M)
             mount or unmount all file systems in a boot environment

       lurename(1M)
             change the name of a boot environment

       lustatus(1M)
             display status of boot environments

       luumount(1M)
             See lumount(1M)

       luupgrade(1M)
             installs, upgrades, and performs other functions on software on a
             boot environment

       luxadm(1M)
             administration program for the Sun Enterprise Network Array
             (SENA), RSM, SPARCstorage Array (SSA) subsystems, Sun Fire 880
             internal storage subsystem, and individual Fiber Channel
             Arbitrated Loop (FC_AL) devices

       m4(1) macro processor

       m64config(1M)
             configure the M64 Graphics Accelerator

       mach(1)
             display the processor type of the current host

       machid(1)
             get processor type truth value

       mail(1)
             See mailx(1)

       mail(1)
             See mailx(1)

       mail(1B)
             interactive message processing system

       mail.local(1M)
             store mail in a mailbox

       mailcompat(1)
             provide SunOS compatibility for Solaris mailbox format

       mailp(1)
             frontends to the mp Text to PDL (Printer Description Language)
             pretty print filter

       mailq(1)
             print the mail queue

       mailstats(1)
             print statistics collected by sendmail

       mailx(1)
             interactive message processing system

       make(1S)
             maintain, update, and regenerate related programs and files

       makedbm(1M)
             make a dbm file, or get a text file from a dbm file

       makemap(1M)
             create database maps for sendmail

       makeuuid(1M)
             generate Universal Unique Identifiers

       man(1)
             find and display reference manual pages

       mconnect(1)
             connect to SMTP mail server socket

       mcs(1)
             manipulate the comment section of an object file

       mdb(1)
             modular debugger

       mdmonitord(1M)
             daemon to monitor metadevices

       medstat(1M)
             check the status of mediator hosts for a given diskset

       mesg(1)
             permit or deny messages

       message(1F)
             puts its arguments on FMLI message line

       metaclear(1M)
             delete active metadevices and hot spare pools

       metadb(1M)
             create and delete replicas of the metadevice state database

       metadetach(1M)
             See metattach(1M)

       metadevadm(1M)
             update metadevice information

       metahs(1M)
             manage hot spares and hot spare pools

       metainit(1M)
             configure metadevices

       metaoffline(1M)
             place submirrors offline and online

       metaonline(1M)
             See metaoffline(1M)

       metaparam(1M)
             modify parameters of metadevices

       metarecover(1M)
             recover soft partition information

       metarename(1M)
             rename metadevice or switch layered metadevice names

       metareplace(1M)
             enable or replace components of submirrors or RAID5 metadevices

       metaroot(1M)
             setup system files for root (/) metadevice

       metaset(1M)
             configure shared disksets

       metastat(1M)
             display status for metadevice or hot spare pool

       metasync(1M)
             handle metadevice resync during reboot

       metattach(1M)
             attach or detach metadevice to or from a mirror or trans device,
             or attach space (blocks) to a soft partition to grow the soft
             partition

       mib2mof(1M)
             generate MOF file(s) from input SNMP MIB file(s)

       mibiisa(1M)
             Sun SNMP Agent

       mipagent(1M)
             Mobile IP agent

       mipagentconfig(1M)
             configure Mobility IP Agent

       mipagentstat(1M)
             show Mobile IP Mobility Agent status

       mixerctl(1)
             audio mixer control command line application

       mkdevalloc(1M)
             Make device_allocate entries

       mkdevmaps(1M)
             make device_maps entries

       mkdir(1)
             make directories

       mkfifo(1M)
             make FIFO special file

       mkfile(1M)
             create a file

       mkfs(1M)
             construct a file system

       mkfs_pcfs(1M)
             construct a FAT file system

       mkfs_udfs(1M)
              construct a udfs file system

       mkfs_ufs(1M)
             construct a ufs file system

       mkmsgs(1)
             create message files for use by gettxt

       mknod(1M)
             make a special file

       mkstr(1B)
             create an error message file by massaging C source files

       modify_install_server(1M)
             See install_scripts(1M)

       modinfo(1M)
             display information about loaded kernel modules

       modload(1M)
             load a kernel module

       modunload(1M)
             unload a module

       mofcomp(1M)
             compile MOF files into CIM classes

       mofreg(1M)
             register MOF classes with WBEM services

       monacct(1M)
             See acctsh(1M)

       monitor(1M)
             SPARC system PROM monitor

       more(1)
             browse or page through a text file

       mount(1M)
             mount or unmount file systems and remote resources

       mount_cachefs(1M)
             mount CacheFS file systems

       mount_hsfs(1M)
             mount hsfs file systems

       mount_nfs(1M)
             mount remote NFS resources

       mount_pcfs(1M)
             mount pcfs file systems

       mount_tmpfs(1M)
             mount tmpfs file systems

       mount_udfs(1M)
             mount a udfs file system

       mount_ufs(1M)
             mount ufs file systems

       mount_xmemfs(1M)
             mount xmemfs file systems

       mountall(1M)
             mount, unmount multiple file systems

       mountd(1M)
             server for NFS mount requests and NFS access checks

       mp(1) text to PDL (Printer Description Language) pretty print filter

       mpss.so.1(1)
             shared object for setting preferred page size

       mpstat(1M)
             report per-processor or per-processor-set statistics

       msgfmt(1)
             create a message object from a message file

       msgid(1M)
             generate message IDs

       mt(1) magnetic tape control

       mv(1) move files

       mvdir(1M)
             move a directory

       named-bootconf(1M)
             convert name server configuration files

       named-xfer(1M)
             ancillary agent for inbound zone transfers

       named(1M)
             See in.named(1M)

       nawk(1)
             pattern scanning and processing language

       nca(1)
             the Solaris Network Cache and Accelerator (NCA)

       ncab2clf(1)
             convert binary log file to Common Log File format

       ncaconfd(1M)
             Solaris Network Cache and Accelerator (NCA) configuration daemon

       ncakmod(1)
             start or stop the NCA kernel module

       ncheck(1M)
             generate a list of path names versus i-numbers

       ncheck_ufs(1M)
             generate pathnames versus i-numbers for ufs file systems

       ndc(1M)
             name daemon control program

       ndd(1M)
             get and set driver configuration parameters

       neqn(1)
             See eqn(1)

       netscape(1)
             start Netscape Communicator for Solaris

       netstat(1M)
             show network status

       newaliases(1M)
             rebuild the data base for the mail aliases file

       newform(1)
             change the format of a text file

       newfs(1M)
             construct a new UFS file system

       newgrp(1)
             log in to a new group

       newkey(1M)
             create a new Diffie-Hellman key pair in the publickey database

       news(1)
             print news items

       newsp(1)
             See mailp(1)

       newtask(1)
             create new task or change task or project of running process

       nfsd(1M)
             NFS daemon

       nfslogd(1M)
             nfs logging daemon

       nfsstat(1M)
             NFS statistics

       nice(1)
             invoke a command with an altered scheduling priority

       nis+(1)
             a new version of the network information name service

       nis(1)
             See nis+(1)

       nis_cachemgr(1M)
             NIS+ utility to cache location information about NIS+ servers

       nisaddcred(1M)
             create NIS+ credentials

       nisaddent(1M)
             create NIS+ tables from corresponding /etc files or NIS maps

       nisauthconf(1M)
             configure NIS+ security

       nisbackup(1M)
             backup NIS+ directories

       niscat(1)
             display NIS+ tables and objects

       nischgrp(1)
             change the group owner of a NIS+ object

       nischmod(1)
             change access rights on a NIS+ object

       nischown(1)
             change the owner of a NIS+ object

       nischttl(1)
             change the time to live value of a NIS+ object

       nisclient(1M)
             initialize NIS+ credentials for NIS+ principals

       nisd(1M)
             See rpc.nisd(1M)

       nisd_resolv(1M)
             See rpc.nisd_resolv(1M)

       nisdefaults(1)
             display NIS+ default values

       niserror(1)
             display NIS+ error messages

       nisgrep(1)
             See nismatch(1)

       nisgrpadm(1)
             NIS+ group administration command

       nisinit(1M)
             NIS+ client and server initialization utility

       nisldapmaptest(1M)
             test NIS+ and LDAP mapping configuration files

       nisln(1)
             symbolically link NIS+ objects

       nislog(1M)
             display the contents of the NIS+ transaction log

       nisls(1)
             list the contents of a NIS+ directory

       nismatch(1)
             utilities for searching NIS+ tables

       nismkdir(1)
             create NIS+ directories

       nisopaccess(1)
             NIS+ operation access control administration command

       nispasswd(1)
             change NIS+ password information

       nispasswdd(1M)
             See rpc.nispasswdd(1M)

       nisping(1M)
             send ping to NIS+ servers

       nispopulate(1M)
             populate the NIS+ tables in a NIS+ domain

       nisprefadm(1M)
             NIS+ utility to set server preferences for NIS+ clients

       nisrestore(1M)
             restore NIS+ directory backup

       nisrm(1)
             remove NIS+ objects from the namespace

       nisrmdir(1)
             remove NIS+ directories

       nisserver(1M)
             set up NIS+ servers

       nissetup(1M)
             initialize a NIS+ domain

       nisshowcache(1M)
             NIS+ utility to print out the contents of the shared cache file

       nisstat(1M)
             report NIS+ server statistics

       nistbladm(1)
             NIS+ table administration command

       nistest(1)
             return the state of the NIS+ namespace using a conditional
             expression

       nisupdkeys(1M)
             update the public keys in a NIS+ directory object

       nl(1) line numbering filter

       nlsadmin(1M)
             network listener service administration

       nm(1) print name list of an object file

       nohup(1)
             run a command immune to hangups

       notify(1)
             See jobs(1)

       nroff(1)
             format documents for display or line-printer

       nscd(1M)
             name service cache daemon

       nslookup(1M)
             query name servers interactively

       nstest(1M)
             DNS test shell

       nsupdate(1M)
             update Internet name servers interactively

       ntpdate(1M)
             set the date and time by way of NTP

       ntpq(1M)
             standard Network Time Protocol query program

       ntptrace(1M)
             trace a chain of NTP hosts back to their master time source

       nulladm(1M)
             See acctsh(1M)

       obpsym(1M)
             Kernel Symbolic Debugging for OpenBoot Firmware

       ocfserv(1M)
             OCF server

       od(1) octal dump

       on(1) execute a command on a remote system, but with the local
             environment

       onintr(1)
             See trap(1)

       optisa(1)
             determine which variant instruction set is optimal to use

       pack(1)
             compress and expand files

       page(1)
             See more(1)

       pagesize(1)
             display the size or sizes of a page of memory

       pargs(1)
             print  process  arguments,  environment  variables,  or auxiliary
             vector

       parse_dynamic_clustertoc(1M)
             parse clustertoc file based on dynamic entries

       passmgmt(1M)
             password files management

       passwd(1)
             change login password and password attributes

       paste(1)
             merge corresponding or subsequent lines of files

       patch(1)
             apply changes to files

       patchadd(1M)
             apply a patch package to a system running the Solaris operating
             environment

       patchrm(1M)
             remove a Solaris patch package and restore previously saved files

       pathchk(1)
             check path names

       pathconv(1F)
             search FMLI criteria for filename

       pax(1)
             portable archive interchange

       pbind(1M)
             control and query bindings of processes to processors

       pcat(1)
             See pack(1)

       pcmciad(1M)
             PCMCIA user daemon

       pcred(1)
             See proc(1)

       pdp11(1)
             See machid(1)

       perl(1)
             Practical Extraction and Report Language

       pfcsh(1)
             See pfexec(1)

       pfexec(1)
             execute a command in a profile

       pfiles(1)
             See proc(1)

       pfinstall(1M)
             tests installation profiles

       pfksh(1)
             See pfexec(1)

       pflags(1)
             See proc(1)

       pfsh(1)
             See pfexec(1)

       pg(1) files perusal filter for CRTs

       pgrep(1)
             find or signal processes by name and other attributes

       pgxconfig(1M)
             configure the PGX32 (Raptor GFX) Graphics Accelerator

       picld(1M)
             PICL daemon

       ping(1M)
             send ICMP (ICMP6) ECHO_REQUEST packets to network hosts

       pkgadd(1M)
             Transfer software packages to the system

       pkgask(1M)
             stores answers to a request script

       pkgchk(1M)
             check package installation accuracy

       pkginfo(1)
             display software package information

       pkgmk(1)
             produce an installable package

       pkgparam(1)
             display package parameter values

       pkgproto(1)
             generate prototype file entries for input to pkgmk command

       pkgrm(1M)
             remove a package from the system

       pkgtrans(1)
             translate package format

       pkill(1)
             See pgrep(1)

       pldd(1)
             See proc(1)

       plimit(1)
             get or set the resource limits of running processes

       plot(1B)
             graphics filters for various plotters

       plottoa(1B)
             See plot(1B)

       pmadm(1M)
             port monitor administration

       pmap(1)
             display information about the address space of a process

       pmconfig(1M)
             Configure the Power Management system

       pntadm(1M)
             DHCP network table management utility

       pooladm(1M)
             activate and deactivate the resource pools facility

       poolbind(1M)
             bind processes, tasks, or projects or query binding of processes
             to resource pools

       poolcfg(1M)
             create and modify resource pool configuration files

       popd(1)
             See cd(1)

       ports(1M)
             creates /dev entries and inittab entries for serial lines

       postdaisy(1)
             PostScript translator for Diablo 630 daisy-wheel files

       postdmd(1)
             PostScript translator for DMD bitmap files

       postio(1)
             serial interface for PostScript printers

       postmd(1)
             matrix display program for PostScript printers

       postplot(1)
             PostScript translator for plot(4B) graphics files

       postprint(1)
             PostScript translator for text files

       postreverse(1)
             reverse the page order in a PostScript file

       posttek(1)
             PostScript translator for Tektronix 4014 files

       powerd(1M)
             Power manager daemon

       poweroff(1M)
             See halt(1M)

       ppgsz(1)
             set preferred stack and/or heap page size

       pppd(1M)
             point to point protocol daemon

       pppoec(1M)
             PPPoE chat utility

       pppoed(1M)
             PPPoE server daemon

       pppstats(1M)
             print PPP statistics

       pr(1) print files

       praliases(1)
             display system mail aliases

       praudit(1M)
             print contents of an audit trail file

       prctl(1)
             get or set the resource controls of running processes, tasks, and
             projects

       prctmp(1M)
             See acctsh(1M)

       prdaily(1M)
             See acctsh(1M)

       preap(1)
             force a defunct process to be reaped by its parent

       prex(1)
             control tracing and manipulate probe points in a process or the
             kernel

       print(1)
             shell built-in function to output characters to the screen or
             window

       printenv(1B)
             display environment variables currently set

       printf(1)
             write formatted output

       printmgr(1M)
             Solaris Print Manager is a graphical user interface for managing
             printers in a network

       priocntl(1)
             display or set scheduling parameters of specified process(es)

       privatepw(1M)
             administer FTP Server enhanced group access file

       proc(1)
             proc tools

       prodreg(1M)
             GUI viewer for Solaris Product Registry

       prof(1)
             display profile data

       profiles(1)
             print execution profiles for a user

       projadd(1M)
             administer a new project on the system

       projdel(1M)
             delete a project from the system

       projects(1)
             print project membership of user

       projmod(1M)
             modify a project's information on the system

       prs(1)
             See sccs-prs(1)

       prstat(1M)
             report active process statistics

       prt(1)
             See sccs-prt(1)

       prtacct(1M)
             See acctsh(1M)

       prtconf(1M)
             print system configuration

       prtdiag(1M)
             display system diagnostic information

       prtfru(1M)
             print FRUID-specific information about the FRUs on a system or
             domain

       prtpicl(1M)
             print PICL tree

       prtvtoc(1M)
             report information about a disk geometry and partitioning

       prun(1)
             See proc(1)

       ps(1) report process status

       ps(1B)
             display the status of current processes

       psig(1)
             See proc(1)

       psradm(1M)
             change processor operational status

       psrinfo(1M)
             displays information about processors

       psrset(1M)
             creation and management of processor sets

       pstack(1)
             See proc(1)

       pstop(1)
             See proc(1)

       ptime(1)
             See proc(1)

       ptree(1)
             See proc(1)

       pushd(1)
             See cd(1)

       putdev(1M)
             edits device table

       putdgrp(1M)
             edits device group table

       pvs(1)
             display the internal version information of dynamic objects

       pwait(1)
             See proc(1)

       pwck(1M)
             password/group file checkers

       pwconv(1M)
             installs and updates /etc/shadow with information from
             /etc/passwd

       pwd(1)
             return working directory name

       pwdx(1)
             See proc(1)

       quot(1M)
             summarize file system ownership

       quota(1M)
             display a user's ufs file system disk quota and usage

       quotacheck(1M)
             ufs file system quota consistency checker

       quotaoff(1M)
             See quotaon(1M)

       quotaon(1M)
             turn ufs file system quotas on and off

       ranlib(1)
             convert archives to random libraries

       rarpd(1M)
             See in.rarpd(1M)

       rcp(1)
             remote file copy

       rctladm(1M)
             display and/or modify global state of system resource controls

       rdate(1M)
             set system date from a remote host

       rdisc(1M)
             See in.rdisc(1M)

       rdist(1)
             remote file distribution program

       re-preinstall(1M)
             installs the JumpStart software on a system

       read(1)
             read a line from standard input

       readfile(1F)
             reads file, gets longest line

       readonly(1)
             shell built-in function to protect the value of the given
             variable from reassignment

       reboot(1M)
             restart the operating system

       red(1)
             See ed(1)

       refer(1)
             expand and insert references from a bibliographic database

       regcmp(1)
             regular expression compile

       regex(1F)
             match patterns against a string

       rehash(1)
             See hash(1)

       reinit(1F)
             runs an initialization file

       reject(1M)
             See accept(1M)

       rem_drv(1M)
             remove a device driver from the system

       remote_shell(1)
             See rsh(1)

       removef(1M)
             remove a file from software database

       remsh(1)
             See rsh(1)

       renice(1)
             alter priority of running processes

       repeat(1)
             See shell_builtins(1)

       repquota(1M)
             summarize quotas for a ufs file system

       reset(1B)
             See tset(1B)

       reset(1F)
             reset the current form field to its default values

       restricted_shell(1M)
             See rsh(1M)

       return(1)
             See exit(1)

       rexd(1M)
             See rpc.rexd(1M)

       rexecd(1M)
             See in.rexecd(1M)

       rksh(1)
             See ksh(1)

       rlogin(1)
             remote login

       rlogind(1M)
             See in.rlogind(1M)

       rm(1) remove directory entries

       rm_install_client(1M)
             See install_scripts(1M)

       rmail(1)
             See mail(1)

       rmdel(1)
             See sccs-rmdel(1)

       rmdir(1)
             See rm(1)

       rmformat(1)
             removable rewritable media format utility

       rmmount(1M)
             removable media mounter for CD-ROM, floppy, Jaz drive, and others

       rmt(1M)
             remote magtape protocol module

       roffbib(1)
             format and print a bibliographic database

       roleadd(1M)
             administer a new role account on the system

       roledel(1M)
             delete a role's login from the system

       rolemod(1M)
             modify a role's login information on the system

       roles(1)
             print roles granted to a user

       route(1M)
             manually manipulate the routing tables

       routed(1M)
             See in.routed(1M)

       rpc.bootparamd(1M)
             boot parameter server

       rpc.metad(1M)
             remote metaset services

       rpc.metamedd(1M)
             remote mediator services

       rpc.metamhd(1M)
             remote multihost disk services

       rpc.nisd(1M)
             NIS+ service daemon

       rpc.nisd_resolv(1M)
             NIS+ service daemon

       rpc.nispasswdd(1M)
             NIS+ password update daemon

       rpc.rexd(1M)
             RPC-based remote execution server

       rpc.rstatd(1M)
             kernel statistics server

       rpc.rusersd(1M)
             network username server

       rpc.rwalld(1M)
             network rwall server

       rpc.smserverd(1M)
             removable media device server

       rpc.sprayd(1M)
             spray server

       rpc.yppasswdd(1M)
             server for modifying NIS password file

       rpc.ypupdated(1M)
             server for changing NIS information

       rpcbind(1M)
             universal addresses to RPC program number mapper

       rpcgen(1)
             an RPC protocol compiler

       rpcinfo(1M)
             report RPC information

       rpld(1M)
              Network Booting RPL (Remote Program Load) Server

       rpm2cpio(1)
             convert Red Hat Package (RPM) to cpio archive

       rquotad(1M)
             remote quota server

       rsh(1)
             remote shell

       rsh(1M)
             restricted shell command interpreter

       rshd(1M)
             See in.rshd(1M)

       rstatd(1M)
             See rpc.rstatd(1M)

       rtc(1M)
             provide all real-time clock and GMT-lag management

       run(1F)
             run an executable

       runacct(1M)
             run daily accounting

       runat(1)
             execute command in extended attribute name space

       rup(1)
             show host status of remote machines (RPC version)

       rup(1C)
             show host status of remote machines (RPC version)

       ruptime(1)
             show host status of local machines

       rusage(1B)
             print resource usage for a command

       rusers(1)
             who is logged in on remote machines

       rusersd(1M)
             See rpc.rusersd(1M)

       rwall(1M)
             write to all users over a network

       rwalld(1M)
             See rpc.rwalld(1M)

       rwho(1)
             who is logged in on local machines

       rwhod(1M)
             See in.rwhod(1M)

       sa1(1M)
             See sar(1M)

       sa2(1M)
             See sar(1M)

       sac(1M)
             service access cont

       sacadm(1M)
             service access controller administration

       sact(1)
             See sccs-sact(1)

       sadc(1M)
             See sar(1M)

       sadmind(1M)
             distributed system administration daemon

       saf(1M)
             Service Access Facility

       sag(1)
             system activity graph

       sar(1)
             system activity reporter

       sar(1M)
             system activity report package

       savecore(1M)
             save a crash dump of the operating system

       sccs-admin(1)
             create and administer SCCS history files

       sccs-cdc(1)
             change the delta commentary of an SCCS delta

       sccs-comb(1)
             combine SCCS deltas

       sccs-delta(1)
             make a delta to an SCCS file

       sccs-get(1)
             retrieve a version of an SCCS file

       sccs-help(1)
             ask for help regarding SCCS error or warning messages

       sccs-prs(1)
             display selected portions of an SCCS history

       sccs-prt(1)
             display delta table information from an SCCS file

       sccs-rmdel(1)
             remove a delta from an SCCS file

       sccs-sact(1)
             show editing activity status of an SCCS file

       sccs-sccsdiff(1)
             compare two versions of an SCCS file

       sccs-unget(1)
             undo a previous get of an SCCS file

       sccs-val(1)
             validate an SCCS file

       sccs(1)
             front end for the Source Code Control System (SCCS)

       sccsdiff(1)
             See sccs-sccsdiff(1)

       sckmd(1M)
             Sun Fire 15K key management daemon

       scp(1)
             secure copy (remote file copy program)

       script(1)
             make record of a terminal session

       sdiff(1)
             print differences between two files side-by-side

       sed(1)
             stream editor

       sed(1B)
             stream editor

       select(1)
             See shell_builtins(1)

       sendmail(1M)
             send mail over the internet

       set(1)
             shell built-in functions to determine the characteristics for
             environmental variables of the current shell and its descendents

       set(1F)
             set and unset local or global environment variables

       setcolor(1F)
             redefine or create a color

       setenv(1)
             See set(1)

       setfacl(1)
             modify the Access Control List (ACL) for a file or files

       setpgrp(1)
             set process group ID

       settime(1)
             See touch(1)

       setuname(1M)
             change machine information

       setup_install_server(1M)
             See install_scripts(1M)

       sf880drd(1M)
             Sun Fire 880 Dynamic Reconfiguration daemon

       sftp-server(1M)
             SFTP server subsystem

       sftp(1)
             secure file transfer program

       sh(1) standard and job control shell and command interpreter

       share(1M)
             make local resource available for mounting by remote systems

       share_nfs(1M)
             make local NFS file systems available for mounting by remote
             systems

       shareall(1M)
             share, unshare multiple resources

       shell(1F)
             run a command using shell

       shell_builtins(1)
             shell command interpreter built-in commands

       shift(1)
             shell built-in function to traverse either a shell's argument
             list or a list of field-separated words

       showmount(1M)
             show all remote mounts

       showrev(1M)
             show machine, software revision, and patch revision information

       shutacct(1M)
             See acctsh(1M)

       shutdown(1B)
             close down the system at a given time

       shutdown(1M)
             shut down system, change system state

       size(1)
             print section sizes in bytes of object files

       sleep(1)
             suspend execution for an interval

       slpd(1M)
             Service Location Protocol Daemon

       smart2cfg(1)
             Compaq Smart-2 EISA/PCI and Smart-2SL PCI Array Controller ioctl
             utility

       smartcard(1M)
             configure and administer a smartcard

       smattrpop(1M)
             populate security attribute databases in a name service

       smc(1M)
             start the Solaris Management Console

       smccompile(1M)
             build class list and compile Solaris Management Console service
             beans for remote use

       smcconf(1M)
             configure the Solaris Management Console

       smcregister(1M)
             configure the Solaris Management Console

       smcron(1M)
             manage jobs in the crontab database

       smdiskless(1M)
             manage diskless client support for a server

       smexec(1M)
             manage entries in the exec_attr database

       smgroup(1M)
             manage group entries

       smlog(1M)
             manage and view WBEM log files

       smmaillist(1M)
             manage email alias entries

       smmultiuser(1M)
             manage bulk operations on user accounts

       smosservice(1M)
             manage OS services

       smpatch(1M)
             manage patches

       smprofile(1M)
             manage profiles in the prof_attr and exec_attr databases

       smrole(1M)
             manage roles and users in role accounts

       smrsh(1M)
             restricted shell for sendmail

       smserialport(1M)
             manage serial port

       smuser(1M)
             manage user entries

       snca(1)
             See nca(1)

       snmpXdmid(1M)
             Sun Solstice Enterprise SNMP-DMI mapper subagent

       snmpXwbemd(1M)
             SNMP Adapter Subagent for WBEM

       snmpdx(1M)
             Sun Solstice Enterprise Master Agent

       snoop(1M)
             capture and inspect network packets

       soconfig(1M)
             configure transport providers for use by sockets

       soelim(1)
             resolve and eliminate .so requests from nroff or troff input

       soladdapp(1M)
             add an application to the Solstice application registry

       soldelapp(1M)
             remove an application from the Solstice application registry

       solregis(1)
             Solaris user registration

       solstice(1M)
             access system administration tools with a graphical user
             interface

       sort(1)
             sort, merge, or sequence check text files

       sortbib(1)
             sort a bibliographic database

       sotruss(1)
             trace shared library procedure calls

       source(1)
             See exec(1)

       sparc(1)
             See machid(1)

       spell(1)
             report spelling errors

       spellin(1)
             See spell(1)

       spline(1)
             interpolate smooth curve

       split(1)
             split a file into pieces

       sppptun(1M)
             PPP tunneling driver utility

       spray(1M)
             spray packets

       sprayd(1M)
             See rpc.sprayd(1M)

       srchtxt(1)
             display contents of, or search for a text string in, message data
             bases

       ssaadm(1M)
             administration program for SPARCstorage Array and SPARCstorage
             RSM disk systems

       ssh-add(1)
             add RSA or DSA identities for the authentication agent

       ssh-agent(1)
             authentication agent

       ssh-http-proxy-connect(1)
             Secure Shell proxy for HTTP

       ssh-keygen(1)
             authentication key generation

       ssh-socks5-proxy-connect(1)
             Secure Shell proxy for SOCKS5

       ssh(1)
             OpenSSH secure shell client (remote login program)

       sshd(1M)
             secure shell daemon

       startup(1M)
             See acctsh(1M)

       statd(1M)
             network status monitor

       stop(1)
             See jobs(1)

       strace(1M)
             print STREAMS trace messages

       strchg(1)
             change or query stream configuration

       strclean(1M)
             STREAMS error logger cleanup program

       strconf(1)
             See strchg(1)

       strerr(1M)
             STREAMS error logger daemon

       strings(1)
             find printable strings in an object or binary file

       strip(1)
             strip symbol table, debugging and line number information from an
             object file

       stty(1)
             set the options for a terminal

       stty(1B)
             set the options for a terminal

       sttydefs(1M)
             maintain line settings and hunt sequences for TTY ports

       su(1M)
             become super user or another user

       sulogin(1M)
             access single-user mode

       sum(1)
             print checksum and block count for a file

       sum(1B)
             calculate a checksum for a file

       sun(1)
             See machid(1)

       suninstall(1M)
             install the Solaris environment

       suspend(1)
             shell built-in function to halt the current shell

       swap(1M)
             swap administrative interface

       switch(1)
             See shell_builtins(1)

       swmtool(1M)
             install, upgrade, and remove software packages

       sxconfig(1M)
             configure contiguous memory for the SX video subsystem

       symorder(1)
             rearrange a list of symbols

       sync(1M)
             update the super block

       syncinit(1M)
             set serial line interface operating parameters

       syncloop(1M)
             synchronous serial loopback test program

       syncstat(1M)
             report driver statistics from a synchronous serial link

       sys-unconfig(1M)
             undo a system's configuration

       sysV-make(1)
             maintain, update, and regenerate groups of programs

       sysdef(1M)
             output system definition

       syseventadm(1M)
             sysevent event specification administration

       syseventconfd(1M)
             kernel system event command invocation daemon

       syseventd(1M)
             kernel system event notification daemon

       sysidconfig(1M)
             execute system configuration applications, or define set of
             system configuration applications

       sysidnet(1M)
             See sysidtool(1M)

       sysidns(1M)
             See sysidtool(1M)

       sysidpm(1M)
             See sysidtool(1M)

       sysidroot(1M)
             See sysidtool(1M)

       sysidsys(1M)
             See sysidtool(1M)

       sysidtool(1M)
             system configuration

       syslogd(1M)
             log system messages

       t300(1)
             See tplot(1)

       t300(1B)
             See plot(1B)

       t300s(1)
             See tplot(1)

       t300s(1B)
             See plot(1B)

       t4013(1B)
             See plot(1B)

       t4014(1)
             See tplot(1)

       t450(1)
             See tplot(1)

       t450(1B)
             See plot(1B)

       tabs(1)
             set tabs on a terminal

       tail(1)
             deliver the last part of a file

       talk(1)
             talk to another user

       talkd(1M)
             See in.talkd(1M)

       tapes(1M)
             creates /dev entries for tape drives attached to the system

       tar(1)
             create tape archives and add or extract files

       taskstat(1M)
             prints ASET tasks status

       tbl(1)
             format tables for nroff or troff

       tcopy(1)
             copy a magnetic tape

       tcxconfig(1M)
             configure the default linearity of the 24-bit TrueColor Visual
             for OpenWindows on a system with an S24 frame buffer (TCX)

       tee(1)
             replicate the standard output

       tek(1)
             See tplot(1)

       tek(1B)
             See plot(1B)

       telinit(1M)
             See init(1M)

       telnet(1)
             user interface to a remote system using the TELNET protocol

       telnetd(1M)
             See in.telnetd(1M)

       test(1)
             evaluate condition(s)

       test(1B)
             condition evaluation command

       test(1F)
             condition evaluation command

       tftp(1)
             trivial file transfer program

       tftpd(1M)
             See in.tftpd(1M)

       th_define(1M)
             create fault injection test harness error specifications

       th_manage(1M)
             manage the fault injection test harness

       tic(1M)
             terminfo compiler

       time(1)
             time a simple command

       timemanp(1)
             See mailp(1)

       times(1)
             shell built-in function to report time usages of the current
             shell

       timesysp(1)
             See mailp(1)

       timex(1)
             time a command; report process data and system activity

       tip(1)
             connect to remote system

       tnamed(1M)
             See in.tnamed(1M)

       tnfdump(1)
             convert binary TNF file to ASCII

       tnfxtract(1)
             extract kernel probes output into a trace file

       touch(1)
             change file access and modification times

       touch(1B)
             change file access and modification times

       tplot(1)
             graphics filters for various plotters

       tput(1)
             initialize a terminal or query terminfo database

       tr(1) translate characters

       tr(1B)
             translate characters

       traceroute(1M)
             print the route packets take to network host

       trap(1)
             shell built-in functions to respond to (hardware) signals

       trapstat(1M)
             report trap statistics

       troff(1)
             typeset or format documents

       true(1)
             provide truth values

       truss(1)
             trace system calls and signals

       tset(1B)
             establish or restore terminal characteristics

       tsort(1)
             topological sort

       tty(1)
             return user's terminal name

       ttyadm(1M)
             format and output port monitor-specific information

       ttymon(1M)
             port monitor for terminal ports

       tunefs(1M)
             tune up an existing file system

       turnacct(1M)
             See acctsh(1M)

       type(1)
             write a description of command type

       typeset(1)
             shell built-in functions to set/get attributes and values for
             shell variables and functions

       tzselect(1M)
             select a time zone

       u370(1)
             See machid(1)

       u3b(1)
             See machid(1)

       u3b15(1)
             See machid(1)

       u3b2(1)
             See machid(1)

       u3b5(1)
             See machid(1)

       uadmin(1M)
             administrative control

       ucblinks(1B)
             adds /dev entries to give SunOS 4.x compatible names to SunOS 5.x
             devices

       ufsdump(1M)
             incremental file system dump

       ufsrestore(1M)
             incremental file system restore

       ul(1) do underlining

       ulimit(1)
             See limit(1)

       umask(1)
             get or set the file mode creation mask

       umount(1M)
             See mount(1M)

       umountall(1M)
             See mountall(1M)

       unalias(1)
             See alias(1)

       uname(1)
             print name of current system

       uncompress(1)
             See compress(1)

       unexpand(1)
             See expand(1)

       unget(1)
             See sccs-unget(1)

       unhash(1)
             See hash(1)

       unifdef(1)
             resolve and remove ifdef'ed lines from C program source

       uniq(1)
             report or filter out repeated lines in a file

       units(1)
             converts quantities expressed in standard scales to other scales

       unix2dos(1)
             convert text file from ISO format to DOS format

       unlimit(1)
             See limit(1)

       unlink(1M)
             See link(1M)

       unpack(1)
             See pack(1)

       unset(1)
             See set(1)

       unset(1F)
             See set(1F)

       unsetenv(1)
             See set(1)

       unshare(1M)
             make local resource unavailable for mounting by remote systems

       unshare_nfs(1M)
             make local NFS file systems unavailable for mounting by remote
             systems

       unshareall(1M)
             See shareall(1M)

       until(1)
             See shell_builtins(1)

       update_drv(1M)
             modify device driver attributes

       uptime(1)
             show how long the system has been up

       useradd(1M)
             administer a new user login on the system

       userdel(1M)
             delete a user's login from the system

       usermod(1M)
             modify a user's login information on the system

       users(1B)
             display a compact list of users logged in

       utmp2wtmp(1M)
             See acct(1M)

       utmpd(1M)
             utmpx monitoring daemon

       uucheck(1M)
             check the uucp directories and permissions file

       uucico(1M)
             file transport program for the uucp system

       uucleanup(1M)
             uucp spool directory clean-up

       uucp(1C)
             UNIX-to-UNIX system copy

       uucpd(1M)
             See in.uucpd(1M)

       uudecode(1C)
             See uuencode(1C)

       uuencode(1C)
             encode a binary file, or decode its encoded representation

       uuglist(1C)
             print the list of service grades that are available on this UNIX
             system

       uulog(1C)
             See uucp(1C)

       uuname(1C)
             See uucp(1C)

       uupick(1C)
             See uuto(1C)

       uusched(1M)
             uucp file transport program scheduler

       uustat(1C)
             uucp status inquiry and job control

       uuto(1C)
             public UNIX-to-UNIX system file copy

       uutry(1M)
             See Uutry(1M)

       uux(1C)
             UNIX-to-UNIX system command execution

       uuxqt(1M)
             execute remote command requests

       vacation(1)
             reply to mail automatically

       val(1)
             See sccs-val(1)

       valdate(1)
             See ckdate(1)

       valgid(1)
             See ckgid(1)

       valint(1)
             See ckint(1)

       valpath(1)
             See ckpath(1)

       valrange(1)
             See ckrange(1)

       valstr(1)
             See ckstr(1)

       valtime(1)
             See cktime(1)

       valuid(1)
             See ckuid(1)

       valyorn(1)
             See ckyorn(1)

       vax(1)
             See machid(1)

       vc(1) version control

       vedit(1)
             See vi(1)

       ver(1)
             See tplot(1)

       vgrind(1)
             grind nice program listings

       vi(1) screen-oriented (visual) display editor based on ex

       view(1)
             See vi(1)

       vipw(1B)
             edit the password file

       vmstat(1M)
             report virtual memory statistics

       volcancel(1)
             cancel user's request for removable media that is not currently
             in drive

       volcheck(1)
             checks for media in a drive and by default checks all floppy
             media

       volcopy(1M)
             make an image copy of file system

       volcopy_ufs(1M)
             make an image copy of a ufs file system

       vold(1M)
             Volume Management daemon to manage CD-ROM and floppy, ZIP/JAZ,
             and DVD-ROM devices

       volmissing(1)
             notify user that volume requested is not in the CD-ROM or floppy
             drive

       volrmmount(1)
             call rmmount to mount or unmount media

       vplot(1B)
             See plot(1B)

       vsig(1F)
             synchronize a co-process with the controlling FMLI application

       w(1)  display information about currently logged-in users

       wait(1)
             await process completion

       wall(1M)
             write to all users

       wbemadmin(1M)
             start Sun WBEM User Manager

       wbemconfig(1M)
             convert a JavaSpaces datastore to the newer Reliable Log
             datastore format

       wbemlogviewer(1M)
             start WBEM Log Viewer

       wc(1) display a count of lines, words and characters in a file

       what(1)
             extract SCCS version information from a file

       whatis(1)
             display a one-line summary about a keyword

       whence(1)
             See typeset(1)

       whereis(1B)
             locate the binary, source, and manual page files for a command

       which(1)
             locate a command; display its pathname or alias

       while(1)
             See shell_builtins(1)

       who(1)
             who is on the system

       whoami(1B)
             display the effective current username

       whocalls(1)
             report on the calls to a specific procedure

       whodo(1M)
             who is doing what

       whois(1)
             Internet user name directory service

       wracct(1M)
             write extended accounting records for active processes and tasks

       write(1)
             write to another user

       wrsmconf(1M)
             manage WCI RSM controller configurations

       wrsmstat(1M)
             report WCI RSM driver statistics

       wtmpfix(1M)
             See fwtmp(1M)

       xargs(1)
             construct argument lists and invoke utility

       xgettext(1)
             extract gettext call strings from C programs

       xntpd(1M)
             Network Time Protocol daemon

       xntpdc(1M)
             special NTP query program

       xstr(1)
             extract strings from C programs to implement shared strings

       yacc(1)
             yet another compiler-compiler

       yes(1)
             generate repetitive affirmative output

       ypbind(1M)
             NIS binder process

       ypcat(1)
             print values in a NIS database

       ypinit(1M)
             set up NIS client

       ypmake(1M)
             rebuild NIS database

       ypmatch(1)
             print the value of one or more keys from a NIS map

       yppasswd(1)
             change your network password in the NIS database

       yppasswdd(1M)
             See rpc.yppasswdd(1M)

       yppoll(1M)
             return current version of a NIS map at a NIS server host

       yppush(1M)
             force propagation of changed NIS map

       ypserv(1M)
             NIS server and binder processes

       ypset(1M)
             point ypbind at a particular server

       ypstart(1M)
             Start and stop NIS services

       ypstop(1M)
             See ypstart(1M)

       ypupdated(1M)
             See rpc.ypupdated(1M)

       ypwhich(1)
             return name of NIS server or map master

       ypxfr(1M)
             transfer NIS map from a NIS server to host

       ypxfr_1perday(1M)
             See ypxfr(1M)

       ypxfr_1perhour(1M)
             See ypxfr(1M)

       ypxfr_2perday(1M)
             See ypxfr(1M)

       ypxfrd(1M)
             See ypserv(1M)

       zcat(1)
             See compress(1)

       zdump(1M)
             time zone dumper

       zic(1M)
             time zone compiler

SunOS 5.9                         01 Mar 2002                         Intro(1)

NAME | DESCRIPTION | ATTRIBUTES | SEE ALSO | DIAGNOSTICS | WARNINGS | LIST OF COMMANDS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=intro&sektion=1&manpath=SunOS+5.9>

home | help