Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
INPUT(1)		    General Commands Manual		      INPUT(1)

NAME
       input - Yagi-Uda	project	antenna	defining program

SYNOPSIS
       input [ - h ]

DESCRIPTION
       The  program input is one of a number of	executable programs that forms
       part of a set of	programs, collectively known as	the Yagi-Uda project ,
       which were designed for analysis	and optimisation of Yagi-Uda antennas.
       input is	an interactive program,	that asks  the	user  for  information
       about a Yagi design, such as position of	elements, spacing between ele-
       ments, frequency	span of	interest and a filename	to save	the  data  to.
       input  then  writes  this  information into an ASCII file, which	can be
       read by yagi or optimise	The file is ASCII and it's  format  is	easily
       understood  by inspection (there	are comments printed in	it), so	it can
       if necessary be edited manually.

       After running input and specifying a filename (for example 144e10)  you
       should  then type yagi 144e10 and then output 144e10 and	optionally op-
       timise 144e10

OPTIONS
       -h     Print a help message.

FILES
       filename		ASCII data file	in which design	is put.

PLATFORMS
       Both DOS	and Unix versions have been built. The DOS version as distrib-
       uted requires a 386 PC with a 387 maths coprocessor.

AUTHORS
       Dr.  David  Kirkby  G8WRB (david.kirkby@onetel.net).  with help with in
       converting to DOS/PC from Dr. Joe Mack NA3T (mack@fcrfv2.ncifcrf.gov)

SEE ALSO
       first(1), yagi(), output(1), optimise(1), input (5), first(5), yagi(5),
       output(5) and optimise(5).

       Bugs should be reported to
       david.kirkby@onetel.net.
       Bugs  tend  actually  to	 be fixed if they can be isolated, so it is in
       your interest to	report them in such a way that they can	be easily  re-
       produced.

       If  a mistake is	made during inputting of data (such as entering	an in-
       correct length),	it is not possible to go back and  correct  this.  You
       should  make  a	note of	the error, and edit the	ASCII text file	with a
       text editor (vi,	DOS edit etc).

Version	1.16		      24th October  2000		      INPUT(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | FILES | PLATFORMS | AUTHORS | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=input&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help