Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
in.rexecd(1M)		System Administration Commands		 in.rexecd(1M)

NAME
       in.rexecd, rexecd - remote execution server

SYNOPSIS
       in.rexecd

DESCRIPTION
       in.rexecd  is  the  server  for the rexec(3SOCKET) routine.  The	server
       provides	remote execution facilities with authentication	based on  user
       names  and  passwords.  It  is  invoked	automatically as needed	by in-
       etd(1M),	and then executes the following	protocol:

       1.  The server reads characters from the	socket up to a null (\0) byte.
	   The resultant string	is interpreted as an ASCII number, base	10.

       2.  If  the number received in step 1 is	non-zero, it is	interpreted as
	   the port number of a	secondary stream to be used for	the stderr.  A
	   second  connection  is  then	 created  to the specified port	on the
	   client's machine.

       3.  A null terminated user name of at most 16 characters	 is  retrieved
	   on the initial socket.

       4.  A null terminated password of at most 16 characters is retrieved on
	   the initial socket.

       5.  A null terminated command to	be passed to a shell is	 retrieved  on
	   the	initial	 socket.   The length of the command is	limited	by the
	   upper bound on the size of the system's argument list.

       6.  rexecd then validates the user as is	done at	login time and,	if the
	   authentication  was	successful,  changes to	the user's home	direc-
	   tory, and establishes the user and group protections	of  the	 user.
	   If any of these steps fail the connection is	aborted	and a diagnos-
	   tic message is returned.

       7.  A null byte is returned  on	the  connection	 associated  with  the
	   stderr  and the command line	is passed to the normal	login shell of
	   the user.  The shell	inherits the network  connections  established
	   by rexecd.

USAGE
       in.rexecd and rexecd are	IPv6-enabled. See ip6(7P).

ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE	TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWrcmds			   |
       +-----------------------------+-----------------------------+

SEE ALSO
       svcs(1),	  inetd(1M),   inetadm(1M),  svcadm(1M),  rexec(3SOCKET),  at-
       tributes(5), smf(5), ip6(7P)

DIAGNOSTICS
       All diagnostic messages are returned on the connection associated  with
       the stderr, after which any network connections are closed. An error is
       indicated by a leading byte with	a value	of 1 (0	is returned in step  7
       above  upon successful completion of all	the steps prior	to the command
       execution).

       username	too long       The name	is longer than 16 characters.

       password	too long       The password is longer than 16 characters.

       command too long	       The command line	passed exceeds the size	of the
			       argument	list (as configured into the system).

       Login incorrect.	       No  password  file  entry for the user name ex-
			       isted.

       Password	incorrect.     The wrong password was supplied.

       No remote directory.    The chdir command to the	home directory failed.

       Try again.	       A fork by the server failed.

       /usr/bin/sh: ...	       The user's login	shell could not	be started.

NOTES
       The in.rexecd service is	managed	by the	service	 management  facility,
       smf(5), under the service identifier:

       svc:/network/rexec:default

       Administrative actions on this service, such as enabling, disabling, or
       requesting restart, can be performed using  svcadm(1M).	Responsibility
       for  initiating	and restarting this service is delegated to inetd(1M).
       Use inetadm(1M) to make configuration changes and to view configuration
       information for this service. The service's status can be queried using
       the svcs(1) command.

SunOS 5.10			  4 Nov	2004			 in.rexecd(1M)

NAME | SYNOPSIS | DESCRIPTION | USAGE | ATTRIBUTES | SEE ALSO | DIAGNOSTICS | NOTES

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=in.rexecd&sektion=1m&manpath=SunOS+5.10>

home | help