Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
IDT(4)                 FreeBSD Kernel Interfaces Manual                 IDT(4)

NAME
     idt - device driver for IDT NICStAR-based ATM interfaces

SYNOPSIS
     device idt
     device atm

DESCRIPTION
     The idt device driver supports ATM network interfaces based on the IDT
     NICStAR 77211 controller, including the FORE Systems ForeRunner LE25 and
     LE155.  For configuring the card for IP see natmip(4).

     ATM CBR connections are supported, and bandwidth is allocated in slots of
     64k each.  Three VBR queues handle traffic for VBR and UBR.  Two UBR
     queues prioritize UBR traffic.  ILMI and signalling get the higher
     priority queue, as well as UBR traffic that specifies a peak cell rate.
     All other UBR traffic goes into the lower queue.

     The following sysctls are recognized by the driver:

     hw.idt.log_bufstat
          Print statistics about buffer use to the system log periodically.

     hw.idt.log_vcs
          Print information about VC opens, closes, and other events to the
          system log.

     hw.idt.bufs_large
          Set or print the maximum size of the 2KB buffer queue.

     hw.idt.bufs_small
          Set or print the maximum size of the mbuf queue.

     hw.idt.cur_large
          Print the current size of the 2KB buffer queue.

     hw.idt.cur_small
          Print the current size of the mbuf queue.

     hw.idt.qptr_hold
          Optimize the TX queue buffer for lowest overhead.

SEE ALSO
     natm(4), natmip(4), ifconfig(8), route(8)

AUTHORS
     Richard Hodges, based on the original driver for FreeBSD 2.2 by
     Mark Tinguely.
     Bruce M. Simpson wrote this manual page and backported the driver to
     FreeBSD 4.9.

FreeBSD 11.0-PRERELEASE          June 3, 2003          FreeBSD 11.0-PRERELEASE

NAME | SYNOPSIS | DESCRIPTION | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=idt&sektion=4&manpath=FreeBSD+5.2-RELEASE>

home | help