Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
HYDRA(1)		    General Commands Manual		      HYDRA(1)

NAME
       hydra  -	a very fast network logon cracker which	support	many different
       services

SYNOPSIS
       hydra
	[[[-l LOGIN|-L FILE] [-p PASS|-P FILE|-x OPT -y]] | [-C	FILE]]
	[-e nsr] [-u] [-f|-F] [-M FILE]	[-o FILE] [-b FORMAT]
	[-t TASKS] [-T TASKS] [-w TIME]	[-W TIME] [-m OPTIONS] [-s PORT]
	[-c TIME] [-S] [-O] [-4|6] [-I]	[-vV] [-d]
	server service [OPTIONS]

DESCRIPTION
       Hydra is	a parallelized login cracker which supports numerous protocols
       to attack. New modules are easy to add, beside that, it is flexible and
       very fast.

       This tool gives researchers and security	consultants the	possibility to
       show  how easy it would be to gain unauthorized access from remote to a
       system.

       Currently this tool supports:
	      adam6500 afp asterisk cisco cisco-enable cvs firebird  ftp  ftps
	      http[s]-{head|get|post} http[s]-{get|post}-form http-proxy http-
	      proxy-urlenum  icq   imap[s]   irc   ldap2[s]   ldap3[-{cram|di-
	      gest}md5][s]  mssql mysql(v4) mysql5 ncp nntp oracle oracle-lis-
	      tener oracle-sid pcanywhere pcnfs	pop3[s]	postgres  rdp  radmin2
	      redis  rexec  rlogin rpcap rsh rtsp s7-300 sapr3 sip smb smtp[s]
	      smtp-enum	snmp socks5 ssh	sshkey svn teamspeak telnet[s] vmauthd
	      vnc xmpp

       For  most  protocols  SSL is supported (e.g. https-get, ftp-ssl,	etc.).
       If not all necessary libraries are  found  during  compile  time,  your
       available  services  will  be less.  Type "hydra" to see	what is	avail-
       able.

Options
       target a	target to attack, can be an IPv4 address, IPv6 address or  DNS
	      name.

       service
	      a	service	to attack, see the list	of protocols available

       OPTIONAL	SERVICE	PARAMETER
	      Some  modules have optional or mandatory options.	type "hydra -U
	      <servicename>"
	       to get help on on the options of	a service.

       -R     restore a	previously aborted session. Requires  a	 hydra.restore
	      file  was	 written.  Options are restored, but can be changed by
	      setting them after -R on the command line

       -S     connect via SSL

       -O     use old SSL v2 and v3

       -s PORT
	      if the service is	on a different default port, define it here

       -l LOGIN
	      or -L FILE login with LOGIN name,	or load	 several  logins  from
	      FILE

       -p PASS
	      or  -P  FILE  try	 password PASS,	or load	several	passwords from
	      FILE

       -x min:max:charset
	      generate passwords from min to max length. charset can contain 1
	       for numbers, a for lowcase and A	for upcase characters.
	       Any other character is added is put to the list.
		 Example: 1:2:a1%.
		 The generated passwords will be of length 1 to	2 and contain
		 lowcase letters, numbers and/or percent signs and dots.

       -y     disable use of symbols in	-x bruteforce, see above

       -e nsr additional checks, "n" for null password,	"s" try	login as pass,
	      "r" try the reverse login	as pass

       -C FILE
	      colon separated "login:pass" format, instead of -L/-P options

       -u     by  default  Hydra  checks  all passwords	for one	login and then
	      tries the	next login. This option	loops around the passwords, so
	      the  first  password is tried on all logins, then	the next pass-
	      word.

       -f     exit after the first found login/password	pair (per host if -M)

       -F     exit after the first found login/password	pair for any host (for
	      usage with -M)

       -M FILE
	      server list for parallel attacks,	one entry per line

       -o FILE
	      write found login/password pairs to FILE instead of stdout

       -b FORMAT
	      specify the format for the -o FILE: text(default), json, jsonv1

       -t TASKS
	      run TASKS	number of connects in parallel (default: 16)

       -m OPTIONS
	      module  specific options.	See hydra -U <module> what options are
	      available.

       -w TIME
	      defines the max wait time	in seconds for responses (default: 32)

       -W TIME
	      defines a	wait time between each	connection  a  task  performs.
	      This usually only	makes sense if a low task number is used, .e.g
	      -t 1

       -c TIME
	      the wait time in seconds per login attempt over all threads  (-t
	      1	 is  recommended)  This	usually	only makes sense if a low task
	      number is	used, .e.g -t 1

       -4 / -6
	      prefer IPv4 (default) or IPv6 addresses

       -v / -V
	      verbose mode / show login+pass combination for each attempt

       -d     debug mode

       -I     ignore an	existing restore file (don't wait 10 seconds)

       -h, --help
	      Show summary of options.

SEE ALSO
       xhydra(1), pw-inspector(1).
       The programs are	documented fully by van	Hauser <vh@thc.org>

AUTHOR
       hydra was written by van	Hauser / THC <vh@thc.org> Find new versions or
       report bugs at https://github.com/vanhauser-thc/thc-hydra

       This manual page	was written by Daniel Echeverry	<epsilon77@gmail.com>,
       for the Debian project (and may be used by others).

				  01/01/2019			      HYDRA(1)

NAME | SYNOPSIS | DESCRIPTION | Options | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=hydra&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help