Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
HATARI(1)							     HATARI(1)

NAME
       hatari -	Atari ST/STE/TT/Falcon emulator

SYNOPSIS
       hatari [options]	[directory|diskimage|program]

DESCRIPTION
       Hatari  is  an Atari ST/STE/TT/Falcon emulator for Linux, FreeBSD, BeOS
       and other Systems which are supported by	the SDL	library.

       With Hatari one can run games, demos or applications written for	 Atari
       ST,  STE	or Falcon.  Atari TT support is	experimental.  Hatari supports
       the commonly used *.st, *.msa and *.stx disk images, and	hard disk emu-
       lation.

       To run the emulator a TOS ROM image is needed. EmuTOS, a	free implemen-
       tation of TOS is	shipped	with Hatari. It	boots faster than original TOS
       versions,  but  some  buggy (floppy only) programs won't	work correctly
       with it.	 For best compatibility, it is recommended to use  a  TOS  ROM
       from a real Atari.

       As  an  argument, one can give either a name of a directory that	should
       be emulated as a	virtual	GEMDOS hard disk, a floppy disk	 image	or  an
       Atari  program  that  should be autostarted.  In	the last case the pro-
       gram's directory	will be	used as	the C: drive from where	 this  program
       will  be	 started.  These shortcuts correspond to "-d <dir>", "--disk-a
       <floppy image>" and "-d <dir> --auto C:<program>" options.

       Booting will be done from the disk image	or directory that's given last
       on the command line as an option	or the argument	(and which corresponds
       to A: or	C:). If	you want to give floppy	image name with	an  autostart-
       ing program name, give it with --disk-a option before the program name.

OPTIONS
       Hatari options are split	into several categories:

General	options
       -h, --help
	      Print command line options and terminate

       -v, --version
	      Print version information	and terminate

       --confirm-quit <bool>
	      Whether Hatari confirms quitting

       -c, --configfile	<filename>
	      Read additional configuration values from	<file>,	these override
	      values read from the global and user configuration files

       -k, --keymap <file>
	      Load keyboard mapping from <file>

       --fast-forward <bool>
	      On fast machine helps skipping (fast forwarding) Hatari output

       --auto <program>
	      Autostarts given program,	if TOS finds it.  Program needs	to  be
	      given  with  full	path it	will have under	emulation, for example
	      "C:\DIR\PROGRAM.PRG". This is implemented	 by  providing	TOS  a
	      virtual  INF  file, including that path as what TOS should start
	      automatically

Common display options
       -m, --mono
	      Start in monochrome mode instead of color

       --monitor <x>
	      Select monitor type (x = mono/rgb/vga/tv)

       --tos-res <x>
	      Select TOS resolution for	color monitors (x  =  low/med/high/tt-
	      low/ttmed)

       -f, --fullscreen
	      Start the	emulator in fullscreen mode

       -w, --window
	      Start the	emulator in windowed mode

       --grab Grab mouse (also)	in windowed mode

       --resizable <bool>
	      Allow window resizing

	      NOTE: this is supported only by Hatari SDL2 build

       --borders <bool>
	      Show  ST/STE/Falcon screen borders (for low/med resolution over-
	      scan demos)

       --frameskips <x>
	      Skip <x> frames after each displayed frame to accelerate	emula-
	      tion  (0=disabled,  >4 uses automatic frameskip with given value
	      as maximum)

       --slowdown <x>
	      Slow down	emulation by factor of x (used as multiplier  for  VBL
	      wait time)

       --mousewarp <bool>
	      To keep host mouse better	in sync	with Atari mouse pointer, cen-
	      ter it to	Hatari window on cold reset and	resolution changes

       --statusbar <bool>
	      Show statusbar (with floppy leds etc etc)

       --drive-led <bool>
	      Show overlay drive led when statusbar isn't shown

       --max-width <x>
	      Preferred	/ maximum window width for borders / zooming

       --max-height <x>
	      Preferred	/ maximum window height	for borders / zooming

       --bpp <bool>
	      Force internal bitdepth (x = 8/15/16/32, 0=disable)

       --disable-video <bool>
	      Run emulation without displaying video (audio only)

ST/STE specific	display	options
       --desktop-st <bool>
	      NOTE: this has effect only  for  SDL1  Hatari  build.   In  SDL2
	      build, --desktop option controls also ST/STe mode.

	      Whether  to use desktop resolution on fullscreen to avoid	issues
	      related to resolution switching  (messing	 multi-screen  setups,
	      several  seconds	delay  needed for resolution switching by some
	      LCD  monitors  and  the  resulting   sound   break).   Otherwise
	      fullscreen  will	use a resolution that is closest to the	Hatari
	      window size.

	      As Hatari	ST/STe display code doesn't  support  zooming  (except
	      low-rez  doubling), it doesn't get scaled	(by Hatari or monitor)
	      when this	is enabled, and	you may	get large black	borders	around
	      ST/STe screen.  Therefore	this is	mainly useful only if you suf-
	      fer from the described effects, but still	want to	grab mouse and
	      remove  other  distractions  from	 the  screen  just by toggling
	      fullscreen mode. (disabled by default)

       --spec512 <x>
	      Hatari uses this threshold to decide when	 to  render  a	screen
	      with  the	slower but more	accurate Spectrum512 screen conversion
	      functions	(0 <= x	<= 512,	0=disable)

       -z, --zoom <x>
	      Zoom (double) low	resolution (1=no, 2=yes)

       --video-timing <x>
	      Wakeup State  for	 MMU/GLUE  (x=ws1/ws2/ws3/ws4/random,  default
	      ws3).  When  powering  on,  the  STF will	randomly choose	one of
	      these wake up states. The	state will  then  affect  the  timings
	      where  border  removals  and  other video	tricks should be made,
	      which can	give different results on screen. For example, WS3  is
	      known  to	be compatible with many	demos, while WS1 can show more
	      problems.

TT/Falcon specific display options
       Zooming to sizes	specified below	is internally done using integer scal-
       ing  factors.  This  means that different Atari resolutions may show up
       with different sizes, but they are never	blurry.

       --desktop <bool>
	      Whether to use desktop resolution	on fullscreen to avoid	issues
	      related to resolution switching. Otherwise fullscreen will use a
	      resolution that is closest to the	Hatari window size.   (enabled
	      by default)

       --force-max <bool>
	      Hatari window size is forced to specified	maximum	size and black
	      borders used when	Atari resolution doesn't scale evenly  to  it.
	      This  is	most useful when recording videos of Falcon demos that
	      change their resolution. (disabled by default)

       --aspect	<bool>
	      Whether to do monitor aspect ratio correction  (enabled  by  de-
	      fault)

VDI options
       --vdi <bool>
	      Whether  to use VDI screen mode.	Doesn't	work with TOS v4.  TOS
	      v3 memory	detection isn't	compatible with	larger VDI modes (i.e.
	      you need to skip the detection at	boot)

       --vdi-planes <x>
	      Use extended VDI resolution with bit depth <x> (x	= 1, 2 or 4)

       --vdi-width <w>
	      Use extended VDI resolution with width <w> (320 <	w <= 2048)

       --vdi-height <h>
	      Use extended VDI resolution with height <h> (200 < h <= 1280)

       TOS  and	 some  popular GEM programs add	extra restrictions for the VDI
       screen size.  In	total screen can take at maximum 300kB,	width needs to
       be  multiple of 128/planes, and height multiple of 16 pixels (or	8, de-
       pending on system font height). That translates	to  following  maximum
       standard	resolutions for	the VDI	mode:

       monochrome
	      FullHD (1920A1080), WUXGA	(1920x1200) and	QWXGA (2048x1152)

       2 plane mode (4 colors)
	      HD (1280x720), WXGA (1280x768) and XGA+ (1152x864)

       4 plane mode (16-colors)
	      qHD (960x540), DVGA (960x640) and	WSVGA (1024x600)

Screen capture options
       --crop <bool>
	      Remove statusbar from the	screen captures

       --avirecord
	      Start  AVI  recording.   Note: recording will automatically stop
	      when emulation resolution	changes.

       --avi-vcodec <x>
	      Select AVI video codec (x	= bmp/png).  PNG  compression  can  be
	      much  slower  than using the uncompressed	BMP format, but	uncom-
	      pressed video content takes huge amount of space.

       --png-level <x>
	      Select PNG compression level for AVI video (x = 0-9).  Both com-
	      pression	efficiency  and	 speed depend on the compressed	screen
	      content. Highest compression level (9) can be really  slow  with
	      some  content.  Levels  3-6  should compress nearly as well with
	      clearly smaller CPU overhead.

       --avi-fps <x>
	      Force AVI	frame rate (x =	50/60/71/...)

       --avi-file <file>
	      Use <file> to record AVI

Devices	options
       -j, --joystick <port>
	      Emulate joystick with cursor keys	in given port (0-5)

       --joy<port> <type>
	      Set joystick type	(none/keys/real) for given port

       --printer <file>
	      Enable printer support and write data to <file>

       --midi <bool>
	      Whether to enable	MIDI support (PortMidi only)

       --midi-in <filename>
	      Enable MIDI support and write raw	MIDI  data  to	<file>	(Linux
	      only)

       --midi-out <filename>
	      Enable  MIDI  support  and read raw MIDI data from <file>	(Linux
	      only)

       --rs232-in <filename>
	      Enable MFP serial	port support and use <file> as the  input  de-
	      vice

       --rs232-out <filename>
	      Enable  MFP serial port support and use <file> as	the output de-
	      vice

       --scc-b-out <filename>
	      Enable SCC channel B serial port support and use <file> for  the
	      output (only for Mega-STE, TT and	Falcon)

Floppy drive options
       --drive-a <bool>
	      Enable/disable drive A (default is on)

       --drive-b <bool>
	      Enable/disable drive B (default is on)

       --drive-a-heads <x>
	      Set number of heads for drive A (1=single	sided, 2=double	sided)

       --drive-b-heads <x>
	      Set number of heads for drive B (1=single	sided, 2=double	sided)

       --disk-a	<file>
	      Set disk image for floppy	drive A

       --disk-b	<file>
	      Set disk image for floppy	drive B

       --fastfdc <bool>
	      speed up FDC emulation (can cause	incompatibilities)

       --protect-floppy	<x>
	      Write  protect  floppy image contents (on/off/auto). With	"auto"
	      option write protection is according to the disk image file  at-
	      tributes

Hard drive options
       -d, --harddrive <dir>
	      GEMDOS  HD emulation.  Emulate harddrive partition(s) with <dir>
	      contents.	 If directory contains only single letter (C-Z)	subdi-
	      rectories,  each	of  these  subdirectories will be treated as a
	      separate partition, otherwise the	given directory	itself will be
	      assigned to drive	"C:". In the multiple partition	case, the let-
	      ters used	as the subdirectory  names  will  determine  to	 which
	      drives/partitions	 they  are  assigned.  If  <dir>  is  an empty
	      string, then harddrive's emulation is disabled

       --protect-hd <x>
	      Write  protect  harddrive	 <dir>	contents  (on/off/auto).  With
	      "auto"  option the protection can	be controlled by setting indi-
	      vidual files attributes as it disables the file attribute	 modi-
	      fications	for the	GEMDOS hard disk emulation

       --gemdos-case <x>
	      Specify  whether	new dir/filenames are forced to	be in upper or
	      lower case with the GEMDOS HD emulation. Off/upper/lower,	off by
	      default

       --gemdos-time <x>
	      Specify what file	modification timestamps	should be used,	emula-
	      tion internal (atari) ones, or ones from the machine  (host)  on
	      which  the  machine  is  running.	While Atari emulation and host
	      clocks are in sync at Hatari startup, they  will	diverge	 while
	      emulation	 is  running, especially if you	use fast forward.  De-
	      fault is "atari".	 If you	modify files  accessed	by  the	 Atari
	      side,  directly  from the	host side while	Hatari is already run-
	      ning, you	may want to use	"host" option

       --gemdos-conv <bool>
	      Whether GEMDOS file names	with 8-bit (non-ASCII) characters  are
	      converted	 between Atari and host	character sets.	On Linux, host
	      file name	character set is assumed to be UTF-8. This  option  is
	      disabled	by  default,  in  case you have	transferred files from
	      Atari machine without proper file	name conversion	(e.g. by  zip-
	      ping them	on Atari and unzipping on PC)

       --gemdos-drive <drive>
	      Assign  (separately  specified)  GEMDOS HD to given drive	letter
	      (C-Z) instead of default C:,  or	use  "skip"  to	 specify  that
	      Hatari  should  add GEMDOS HD after IDE and ACSI drives (assumes
	      Hatari and native	HD driver parse	same number of partitions from
	      the partition tables in HD images)

       --acsi <id>=<file>
	      Emulate  an  ACSI	 hard disk with	given BUS ID (0-7) using image
	      <file>.  If just a filename is given, it is assigned to BUS ID 0

       --scsi <id>=<file>
	      Emulate a	SCSI hard disk with given BUS  ID  (0-7)  using	 image
	      <file>.  If just a filename is given, it is assigned to BUS ID 0

       --ide-master <file>
	      Emulate an IDE 0 (master)	hard disk with an image	<file>

       --ide-slave <file>
	      Emulate an IDE 1 (slave) hard disk with an image <file>

       --ide-swap <id>=<x>
	      Set byte-swap option <x> (off/on/auto) for given IDE <id>	(0/1).
	      If just option is	given, it is applied to	IDE 0

Memory options
       --memstate <file>
	      Load memory snap-shot <file>

       -s, --memsize <x>
	      Set amount of emulated ST	RAM, x = 1 to 14 MiB,  or  0  for  512
	      KiB.  Other values are considered	as a size in KiB

       -s, --ttram <x>
	      Set amount of emulated TT	RAM, x = 0 to 512 MiB (in 4MB steps)

ROM options
       -t, --tos <imagefile>
	      Specify TOS ROM image to use

       --patch-tos <bool>
	      Use  this	 option	 to  enable/disable  TOS ROM patching. Experts
	      only! Leave this enabled unless you know what you	are doing!

       --cartridge <imagefile>
	      Use ROM cartridge	image <file> (only works if GEMDOS  HD	emula-
	      tion and extended	VDI resolution are disabled)

Common CPU options
       --cpulevel <x>
	      Specify  CPU  (680x0)  to	 use (use x >= 1 with EmuTOS or	TOS >=
	      2.06 only!)

       --cpuclock <x>
	      Set the CPU clock	(8, 16 or 32 Mhz)

       --compatible <bool>
	      Use a more compatible, but slower	68000  CPU  mode  with	better
	      prefetch accuracy	and cycle counting

WinUAE CPU core	options
       --cpu-exact <bool>
	      Use cycle	exact CPU emulation (cache emulation)

       --addr24	<bool>
	      Use  24-bit instead of 32-bit addressing mode (24-bit is enabled
	      by default)

       --fpu <x>
	      FPU type (x=none/68881/68882/internal)

       --fpu-softfloat <bool>
	      Use full software	FPU emulation (Softfloat library)

       --mmu <bool>
	      Use MMU emulation

Misc system options
       --machine <x>
	      Select machine type (x = st, megast, ste,	megaste, tt or falcon)

       --blitter <bool>
	      Enable blitter emulation (ST only)

       --dsp <x>
	      Falcon DSP emulation (x =	none, dummy or emu, Falcon only)

       --timer-d <bool>
	      Patch redundantly	high Timer-D frequency set by TOS.  This about
	      doubles Hatari speed (for	ST/e emulation)	as the original	Timer-
	      D	frequency causes most of the interrupts.

       --fast-boot <bool>
	      Patch TOS	and initialize the so-called "memvalid"	 system	 vari-
	      ables  to	 by-pass  the  memory  test of TOS, so that the	system
	      boots faster.

Sound options
       --mic <bool>
	      Enable/disable (Falcon only) microphone

       --sound <x>
	      Sound frequency: 6000-50066. "off" disables the sound and	speeds
	      up  the  emulation.  To  prevent extra sound artifacts, the fre-
	      quency should be selected	so that	it either matches evenly  with
	      the  STE/TT/Falcon  sound	DMA (6258, 12517, 250033, 50066	Hz) or
	      your sound card frequencies (11025, 22050, 44100 or 6000...48000
	      Hz).  Check what your sound card supports.

       --sound-buffer-size <x>
	      SDL's  sound  buffer  size:  10-100,  or 0 to use	default	buffer
	      size.  By	default	Hatari uses an SDL buffer size	of  1024  sam-
	      ples, which gives	approximatively	20-30 ms of sound depending on
	      the chosen sound frequency. Under	some OS	or with	not fully sup-
	      ported sound card, this default setting can cause	a bigger delay
	      at lower frequency (nearly 0.5 sec).  In that case, you can  use
	      this  option  to	force  the size	of the sound buffer to a fixed
	      number of	milliseconds of	sound (using 20	is often a good	choice
	      if  you  have  such problems). Most users	will not need this op-
	      tion.

       --sound-sync <bool>
	      The emulation rate is nudged by +100 or 0	or -100	 micro-seconds
	      on  occasion.   This  prevents the sound buffer from overflowing
	      (long latency and	lost samples) or underflowing  (short  latency
	      and  repeated samples).  The emulation rate smoothly deviates by
	      a	maximum	of 0.58% until synchronized, while the	emulator  con-
	      tinuously	 generates  every  sound  sample  and the crystal con-
	      trolled sound system consumes every sample.
	      (on|off, off=default)

       --ym-mixing <x>
	      Select a method for mixing the three YM2149  voice  volumes  to-
	      gether.	"model"	 uses  a  mathematical model of	the YM voices,
	      "table" uses a lookup table of audio output voltage values  mea-
	      sured on STF and "linear"	just averages the 3 YM voices.

Debug options
       -W, --wincon
	      Open console window (Windows only)

       -D, --debug
	      Toggle whether CPU exceptions invoke the debugger

       --debug-except <flags>
	      Specify  which  exceptions  invoke  debugger, see	--debug-except
	      help for available (comma	separated) exception flags.

       --bios-intercept	<bool>
	      Enable/Disable XBios command parsing. Allows Atari  programs  to
	      use  all	Hatari	functionality  and change Hatari state through
	      Hatari specific XBios(255) calls.	 XBios(20)  printscreen	 calls
	      produce  also  Hatari  screenshots.  XBios(11) Dbmsg call	can be
	      used to invoke the debugger.

       --conout	<device>
	      Enable console (xconout vector functions)	output redirection for
	      given  <device>  to  host	 terminal.  Device 2 is	for the	(CON:)
	      VT52 console, which vector function catches  also	 EmuTOS	 panic
	      messages	and  MiNT console output, not just normal BIOS console
	      output.

       --disasm	<x>
	      Set disassembly options.	'uae' and 'ext'	select the dissasembly
	      engine to	use, bitmask sets output options for the external dis-
	      assembly engine and 'help' lists them.

       --natfeats <bool>
	      Enable/disable (basic) Native  Features  support.	  E.g.	EmuTOS
	      uses it for debug	output.

       --trace <flags>
	      Activate	debug  traces,	see  --trace help for available	(comma
	      separated) tracing flags

       --trace-file <file>
	      Save trace output	to <file> (default=stderr)

       --parse <file>
	      Parse/execute debugger commands from <file>

       --saveconfig
	      Save Hatari configuration	and exit. Hatari UI needs Hatari  con-
	      figuration file to start,	this can be used to create it automat-
	      ically.

       --no-parachute
	      Disable SDL parachute to get Hatari core dumps. SDL parachute is
	      enabled  by  default to restore video mode in case Hatari	termi-
	      nates abnormally while using non-standard	screen resolution.

       --control-socket	<path>
	      Hatari connects to given local socket file  and  reads  commands
	      from  it.	 Use when the control process life-time	is longer than
	      Hatari's,	or control process needs response from Hatari

       --cmd-fifo <path>
	      Hatari creates the indicated FIFO	file and reads	commands  from
	      it.   Commands  can be echoed to FIFO file, and are same as with
	      the control socket. Hatari outputs help  for  unrecognized  com-
	      mands and	subcommands

       --log-file <file>
	      Save log output to <file>	(default=stderr)

       --log-level <x>
	      Log output level (x=debug/todo/info/warn/error/fatal)

       --alert-level <x>
	      Show dialog for log messages above given level

       --run-vbls <x>
	      Exit after X VBLs

       --benchmark
	      Start  in	 benchmark mode	(use with --run-vbls).	This allows to
	      measure the speed	of the emulation in frames per second by  run-
	      ning  at maximum speed (don't wait for VBL). Disable audio/video
	      output to	have as	little OS overhead as possible

INPUT HANDLING
       Hatari provides special input handling for different purposes.

Emulated Atari ST joystick
       Joystick	can be emulated	either with keyboard or	any real joystick sup-
       ported  by  your	 kernel	 / SDL library.	 First joystick	button acts as
       FIRE, second as SPACE key.

Emulated Atari ST mouse
       Middle button mouse click is interpreted	as double click, this is espe-
       cially useful in	Fast Forward mode.

       Mouse scrollwheel will act as cursor up and down	keys.

Emulated Atari ST keyboard
       Keys  on	the keyboard act as the	normal Atari ST	keys so	pressing SPACE
       on your PC will result in an emulated press of the SPACE	key on the ST.
       How the PC keys are mapped to Atari key codes, can be changed with key-
       board config file (-k option).

       The following keys have special meanings:

       Alt    will act as the ST's ALTERNATE key

       left Ctrl
	      will act as the ST's CONTROL key

       Print  will emulate the ST's HELP key

       Scroll lock
	      will emulate the ST's UNDO key

       AltGr will act as Alternate as well as long as you do not press it  to-
       gether with a Hatari hotkey combination.

       The  right Ctrl key is used as the fire button of the emulated joystick
       when you	turn on	joystick emulation via keyboard.

       The cursor keys will act	as the cursor keys on the Atari	ST as long  as
       joystick	emulation via keyboard has been	turned off.

Keyboard shortcuts during emulation
       The shortcut keys can be	configured in the configuration	file.  The de-
       fault settings are:

       AltGr + a
	      record animation

       AltGr + g
	      grab a screenshot

       AltGr + i
	      boss key:	leave full screen mode and iconify window

       AltGr + m
	      (un-)lock	the mouse into the window

       AltGr + r
	      warm reset the ST	(same as the reset button)

       AltGr + c
	      cold reset the ST	(same as the power switch)

       AltGr + d
	      open dialog to select/change disk	A

       AltGr + s
	      enable/disable sound

       AltGr + q
	      quit the emulator

       AltGr + x
	      toggle normal/max	speed

       AltGr + y
	      enable/disable sound recording

       AltGr + k
	      save memory snapshot

       AltGr + l
	      load memory snapshot

       AltGr + j
	      toggle joystick emulation	via cursor keys

       AltGr + F1
	      switch joystick type on joy port 0

       AltGr + F2
	      switch joystick type on joy port 1

       AltGr + F3
	      switch joystick type for joypad A

       AltGr + F4
	      switch joystick type for joypad B

       AltGr + b
	      toggle borders on/off

       AltGr + f or F11
	      toggle between fullscreen	and windowed mode

       AltGr + o or F12
	      activate the Hatari options GUI
	      You may need to hold SHIFT down while in windowed	mode.

       Pause  Pauses the emulation

       AltGr + Pause
	      Invokes the internal Hatari debugger

Keyboard shortcuts for the SDL GUI
       There are multiple ways to interact with	the SDL	GUI.

       TAB and cursor keys change focus	 between  UI  elements.	  Additionally
       Home key	moves focus to first item, End key to last one.	 Initially fo-
       cus is on default UI element, but focus changes are remembered  between
       dialog  invocations.  Enter  and	Space invoke focused item. UI elements
       with underlined characters can be invoked directly with Alt + key  with
       that character.	Alt + arrow keys will act on arrow buttons.

       Most importantly:

       Options GUI main	view
	      Enter accepts configuration, ESC cancels it.

       Options GUI dialogs
	      Enter  (or  End+Enter  if	 focus was moved) returns back to main
	      view.

       Fileselector
	      Page up and down keys scroll the file list.   Enter  on  focused
	      file  name  selects it.  Enter on	OK button accepts the selected
	      file. ESC	cancels	the dialog/selection.

       Alert dialogs
	      Enter accepts and	ESC cancels the	dialog.

SEE ALSO
       The  main  program  documentation,  usually  in	/usr/local/share/doc/.
       Among other things it contains an extensive usage manual, software com-
       patibility list and release notes.

       The homepage of Hatari: http://hatari.tuxfamily.org/

       Other Hatari programs and utilities:
       hmsa(1),	 zip2st(1),  atari-convert-dir(1),  atari-hd-image(1),	hatar-
       iui(1), hconsole(1), gst2ascii(1), hatari_profile(1)

FILES AND DIRECTORIES
       /usr/local/etc/hatari.cfg
	      The global configuration file of Hatari.

       ~/.hatari/
	      The  (default)  directory	 for  user's  personal	Hatari	files;
	      hatari.cfg (configuration	 file),	 hatari.nvram  (NVRAM  content
	      file),  hatari.sav  (Hatari  memory  state  snapshot  file which
	      Hatari  can  load/save  automatically  when  it	starts/exits),
	      hatari.prn  (printer  output  file),  hatari.wav (recorded sound
	      output in	WAV format), hatari.ym (recorded sound	output	in  YM
	      format).

       /usr/local/share/hatari/	(or /usr/local/share/hatari/)
	      The global data directory	of Hatari.

       tos.img
	      The  TOS	ROM  image  will  be loaded from the data directory of
	      Hatari unless it is specified on the command line	or the config-
	      uration file.

AUTHOR
       This  manual  page was written by Marco Herrn <marco@mherrn.de> for the
       Debian project and later	modified by Thomas Huth	and Eero  Tamminen  to
       suit the	latest version of Hatari.

Hatari				  2014-05-08			     HATARI(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | General options | Common display options | ST/STE specific display options | TT/Falcon specific display options | VDI options | Screen capture options | Devices options | Floppy drive options | Hard drive options | Memory options | ROM options | Common CPU options | WinUAE CPU core options | Misc system options | Sound options | Debug options | INPUT HANDLING | Emulated Atari ST joystick | Emulated Atari ST mouse | Emulated Atari ST keyboard | Keyboard shortcuts during emulation | Keyboard shortcuts for the SDL GUI | SEE ALSO | FILES AND DIRECTORIES | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=hatari&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help