Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
GZIP(1)			    General Commands Manual		       GZIP(1)

       gzip, gunzip, zcat - compress or	expand files

       gzip [ -acdfhlLnNrtvV19 ] [-S suffix] [ name ...	 ]
       gunzip [	-acfhlLnNrtvV ]	[-S suffix] [ name ...	]
       zcat [ -fhLV ] [	name ...  ]

       Gzip  reduces  the  size	 of  the  named	 files using Lempel-Ziv	coding
       (LZ77).	Whenever possible, each	file is	replaced by one	with  the  ex-
       tension .gz, while keeping the same ownership modes, access and modifi-
       cation times.  (The default extension is	-gz for	VMS, z for MSDOS, OS/2
       FAT,  Windows  NT  FAT  and Atari.)  If no files	are specified, or if a
       file name is "-", the standard input is compressed to the standard out-
       put.  Gzip will only attempt to compress	regular	files.	In particular,
       it will ignore symbolic links.

       If the compressed file name is too long for its file system, gzip trun-
       cates  it.   Gzip  attempts to truncate only the	parts of the file name
       longer than 3 characters.  (A part is delimited by dots.) If  the  name
       consists	 of small parts	only, the longest parts	are truncated. For ex-
       ample, if file names are	limited	to 14  characters,  gzip.msdos.exe  is
       compressed to  Names are	not truncated on systems which
       do not have a limit on file name	length.

       By default, gzip	keeps the original file	name and timestamp in the com-
       pressed	file.  These  are used when decompressing the file with	the -N
       option. This is useful when the compressed file name was	 truncated  or
       when the	time stamp was not preserved after a file transfer.

       Compressed  files  can be restored to their original form using gzip -d
       or gunzip or zcat.  If the original name	saved in the  compressed  file
       is not suitable for its file system, a new name is constructed from the
       original	one to make it legal.

       gunzip takes a list of files on its command line	and replaces each file
       whose  name  ends with .gz, -gz,	.z, -z,	_z or .Z and which begins with
       the correct magic number	with an	uncompressed file without the original
       extension.  gunzip also recognizes the special extensions .tgz and .taz
       as shorthands for .tar.gz and .tar.Z respectively.   When  compressing,
       gzip  uses the .tgz extension if	necessary instead of truncating	a file
       with a .tar extension.

       gunzip can currently decompress files created by	gzip,  zip,  compress,
       compress	 -H  or	pack.  The detection of	the input format is automatic.
       When using the first two	formats, gunzip	checks a 32 bit	CRC. For pack,
       gunzip checks the uncompressed length. The standard compress format was
       not designed to allow consistency checks. However gunzip	 is  sometimes
       able  to	detect a bad .Z	file. If you get an error when uncompressing a
       .Z file,	do not assume that the .Z file is correct simply  because  the
       standard	 uncompress  does  not complain. This generally	means that the
       standard	uncompress does	not check its  input,  and  happily  generates
       garbage	output.	  The  SCO compress -H format (lzh compression method)
       does not	include	a CRC but also allows some consistency checks.

       Files created by	zip can	be uncompressed	by gzip	only if	 they  have  a
       single  member  compressed with the 'deflation' method. This feature is
       only intended to	help conversion	of files to the	tar.gz format.
       To extract zip files with several members, use unzip instead of gunzip.

       zcat  is	 identical  to	gunzip	-c.  (On some systems, zcat may	be in-
       stalled as gzcat	to preserve the	original link to compress.)  zcat  un-
       compresses  either  a list of files on the command line or its standard
       input and writes	the uncompressed data on standard output.   zcat  will
       uncompress files	that have the correct magic number whether they	have a
       .gz suffix or not.

       Gzip uses the Lempel-Ziv	algorithm used in zip and PKZIP.   The	amount
       of  compression	obtained depends on the	size of	the input and the dis-
       tribution of common substrings.	Typically, text	such as	source code or
       English	is  reduced  by	 60-70%.  Compression is generally much	better
       than that achieved by LZW (as used in  compress),  Huffman  coding  (as
       used in pack), or adaptive Huffman coding (compact).

       Compression  is	always	performed,  even  if  the  compressed  file is
       slightly	larger than the	original. The worst case expansion  is	a  few
       bytes for the gzip file header, plus 5 bytes every 32K block, or	an ex-
       pansion ratio of	0.015% for large files.	Note that the actual number of
       used disk blocks	almost never increases.	 gzip preserves	the mode, own-
       ership and timestamps of	files when compressing or decompressing.

       -a --ascii
	      Ascii text mode: convert end-of-lines using  local  conventions.
	      This  option is supported	only on	some non-Unix systems. For MS-
	      DOS, CR LF is converted to LF when compressing, and LF  is  con-
	      verted to	CR LF when decompressing.

       -c --stdout --to-stdout
	      Write  output on standard	output;	keep original files unchanged.
	      If there are several input files,	the output consists of	a  se-
	      quence  of  independently	 compressed  members. To obtain	better
	      compression, concatenate	all  input  files  before  compressing

       -d --decompress --uncompress

       -f --force
	      Force compression	or decompression even if the file has multiple
	      links or the corresponding file already exists, or if  the  com-
	      pressed data is read from	or written to a	terminal. If the input
	      data is not in a format recognized by gzip, and  if  the	option
	      --stdout	is  also  given, copy the input	data without change to
	      the standard ouput: let zcat behave as cat.  If -f is not	given,
	      and  when	 not running in	the background,	gzip prompts to	verify
	      whether an existing file should be overwritten.

       -h --help
	      Display a	help screen and	quit.

       -l --list
	      For each compressed file,	list the following fields:

		  compressed size: size	of the compressed file
		  uncompressed size: size of the uncompressed file
		  ratio: compression ratio (0.0% if unknown)
		  uncompressed_name: name of the uncompressed file

	      The uncompressed size is given as	-1 for files not in gzip  for-
	      mat,  such  as compressed	.Z files. To get the uncompressed size
	      for such a file, you can use:

		  zcat file.Z |	wc -c

	      In combination with the --verbose	option,	the  following	fields
	      are also displayed:

		  method: compression method
		  crc: the 32-bit CRC of the uncompressed data
		  date & time: time stamp for the uncompressed file

	      The  compression	methods	 currently supported are deflate, com-
	      press, lzh (SCO compress -H) and pack.   The  crc	 is  given  as
	      ffffffff for a file not in gzip format.

	      With  --name,  the  uncompressed name,  date and time  are those
	      stored within the	compress file if present.

	      With --verbose, the size totals and compression  ratio  for  all
	      files  is	 also  displayed,  unless some sizes are unknown. With
	      --quiet, the title and totals lines are not displayed.

       -L --license
	      Display the gzip license and quit.

       -n --no-name
	      When compressing,	do not save the	original file  name  and  time
	      stamp by default.	(The original name is always saved if the name
	      had to be	truncated.) When decompressing,	 do  not  restore  the
	      original	file name if present (remove only the gzip suffix from
	      the compressed file name)	and do not restore the	original  time
	      stamp if present (copy it	from the compressed file). This	option
	      is the default when decompressing.

       -N --name
	      When compressing,	always save the	original file  name  and  time
	      stamp;  this  is	the  default.  When decompressing, restore the
	      original file name and time stamp	if  present.  This  option  is
	      useful on	systems	which have a limit on file name	length or when
	      the time stamp has been lost after a file	transfer.

       -q --quiet
	      Suppress all warnings.

       -r --recursive
	      Travel the directory structure recursively. If any of  the  file
	      names  specified	on the command line are	directories, gzip will
	      descend into the directory and compress all the files  it	 finds
	      there (or	decompress them	in the case of gunzip ).

       -S .suf --suffix	.suf
	      Use  suffix  .suf	 instead  of .gz. Any suffix can be given, but
	      suffixes other than .z and .gz should be avoided to avoid	confu-
	      sion when	files are transferred to other systems.	 A null	suffix
	      forces gunzip to	try decompression on all given	files  regard-
	      less of suffix, as in:

		  gunzip -S "" *       (*.* for	MSDOS)

	      Previous	versions  of gzip used the .z suffix. This was changed
	      to avoid a conflict with pack(1).

       -t --test
	      Test. Check the compressed file integrity.

       -v --verbose
	      Verbose. Display the name	and percentage reduction for each file
	      compressed or decompressed.

       -V --version
	      Version. Display the version number and compilation options then

       -# --fast --best
	      Regulate the speed of compression	using the specified  digit  #,
	      where  -1	 or  --fast  indicates	the fastest compression	method
	      (less compression) and -9	or --best indicates the	 slowest  com-
	      pression	method	(best  compression).   The default compression
	      level is -6 (that	is, biased towards high	compression at expense
	      of speed).

       Multiple	 compressed  files  can	 be concatenated. In this case,	gunzip
       will extract all	members	at once. For example:

	     gzip -c file1  > foo.gz
	     gzip -c file2 >> foo.gz


	     gunzip -c foo

       is equivalent to

	     cat file1 file2

       In case of damage to one	member of a .gz	file, other members can	 still
       be  recovered  (if the damaged member is	removed). However, you can get
       better compression by compressing all members at	once:

	     cat file1 file2 | gzip > foo.gz

       compresses better than

	     gzip -c file1 file2 > foo.gz

       If you want to recompress concatenated files to get better compression,

	     gzip -cd old.gz | gzip > new.gz

       If a compressed file consists of	several	members, the uncompressed size
       and CRC reported	by the --list option applies to	the last member	 only.
       If you need the uncompressed size for all members, you can use:

	     gzip -cd file.gz |	wc -c

       If  you	wish  to create	a single archive file with multiple members so
       that members can	later be extracted independently, use an archiver such
       as  tar or zip. GNU tar supports	the -z option to invoke	gzip transpar-
       ently. gzip is designed as a complement to tar, not as a	replacement.

       The environment variable	GZIP can hold a	set  of	 default  options  for
       gzip.   These  options  are interpreted first and can be	overwritten by
       explicit	command	line parameters. For example:
	     for sh:	GZIP="-8v --name"; export GZIP
	     for csh:	setenv GZIP "-8v --name"
	     for MSDOS:	set GZIP=-8v --name

       On Vax/VMS, the name of the environment variable	is GZIP_OPT, to	 avoid
       a conflict with the symbol set for invocation of	the program.

       znew(1),	zcmp(1), zmore(1), zforce(1), gzexe(1),	zip(1),	unzip(1), com-
       press(1), pack(1), compact(1)

       The gzip	file format is specified in P. Deutsch,	GZIP file format spec-
       ification version 4.3, <>,	Inter-
       net RFC 1952 (May 1996).	 The zip deflation format is specified	in  P.
       Deutsch,	 DEFLATE  Compressed  Data  Format  Specification version 1.3,
       <>, Internet RFC 1951 (May	1996).

       Exit status is normally 0; if an	error occurs, exit status is 1.	 If  a
       warning occurs, exit status is 2.

       Usage: gzip [-cdfhlLnNrtvV19] [-S suffix] [file ...]
	      Invalid options were specified on	the command line.

       file: not in gzip format
	      The file specified to gunzip has not been	compressed.

       file: Corrupt input. Use	zcat to	recover	some data.
	      The  compressed  file has	been damaged. The data up to the point
	      of failure can be	recovered using

		    zcat file >	recover

       file: compressed	with xx	bits, can only handle yy bits
	      File was compressed (using LZW) by a  program  that  could  deal
	      with more	bits than the decompress code on this machine.	Recom-
	      press the	file with gzip,	which compresses better	and uses  less

       file: already has .gz suffix -- no change
	      The  file	 is assumed to be already compressed.  Rename the file
	      and try again.

       file already exists; do you wish	to overwrite (y	or n)?
	      Respond "y" if you want the output file to be replaced;  "n"  if

       gunzip: corrupt input
	      A	 SIGSEGV  violation  was detected which	usually	means that the
	      input file has been corrupted.

       xx.x% Percentage	of the input saved by compression.
	      (Relevant	only for -v and	-l.)

       -- not a	regular	file or	directory: ignored
	      When the input file is not a regular file	or directory, (e.g.  a
	      symbolic link, socket, FIFO, device file), it is left unaltered.

       -- has xx other links: unchanged
	      The  input  file has links; it is	left unchanged.	 See ln(1) for
	      more information.	Use the	-f flag	to force compression of	multi-
	      ply-linked files.

       When  writing  compressed  data to a tape, it is	generally necessary to
       pad the output with zeroes up to	a block	boundary.  When	 the  data  is
       read  and the whole block is passed to gunzip for decompression,	gunzip
       detects that there is extra trailing garbage after the compressed  data
       and  emits  a warning by	default. You have to use the --quiet option to
       suppress	the warning. This option can be	set in	the  GZIP  environment
       variable	as in:
	 for sh:  GZIP="-q"  tar -xfz --block-compress /dev/rst0
	 for csh: (setenv GZIP -q; tar -xfz --block-compr /dev/rst0

       In  the	above  example,	gzip is	invoked	implicitly by the -z option of
       GNU tar.	Make sure that the same	block size (-b option of tar) is  used
       for  reading  and  writing compressed data on tapes.  (This example as-
       sumes you are using the GNU version of tar.)

       The gzip	format represents the the  input  size	modulo	2^32,  so  the
       --list  option reports incorrect	uncompressed sizes and compression ra-
       tios for	uncompressed files 4 GB	and larger.  To	work around this prob-
       lem, you	can use	the following command to discover a large uncompressed
       file's true size:

	     zcat file.gz | wc -c

       The --list option reports sizes as -1 and crc as	ffffffff if  the  com-
       pressed file is on a non	seekable media.

       In  some	rare cases, the	--best option gives worse compression than the
       default compression level (-6). On some highly  redundant  files,  com-
       press compresses	better than gzip.

       Copyright (C) 1998, 1999, 2001 Free Software Foundation,	Inc.
       Copyright (C) 1992, 1993	Jean-loup Gailly

       Permission  is  granted	to make	and distribute verbatim	copies of this
       manual provided the copyright notice and	 this  permission  notice  are
       preserved on all	copies.

       Permission  is granted to copy and distribute modified versions of this
       manual under the	conditions for verbatim	copying, provided that the en-
       tire resulting derived work is distributed under	the terms of a permis-
       sion notice identical to	this one.

       Permission is granted to	copy and distribute translations of this  man-
       ual into	another	language, under	the above conditions for modified ver-
       sions, except that this permission notice may be	stated in  a  transla-
       tion approved by	the Foundation.

				     local			       GZIP(1)


Want to link to this manual page? Use this URL:

home | help