Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
GPT(8)                  FreeBSD System Manager's Manual                 GPT(8)

     gpt - GUID partition table maintenance utility

     gpt [general_options] command [command_options] device ...

     The gpt utility provides the necessary functionality to manipulate GUID
     partition tables (GPTs), but see BUGS below for how and where
     functionality is missing.  The basic usage model of the gpt tool follows
     that of the cvs(1) tool.  The general options are described in the
     following paragraph.  The remaining paragraphs describe the individual
     commands with their options.  Here we conclude by mentioning that a
     device is either a special file corresponding to a disk-like device or a
     regular file.  The command is applied to each device listed on the
     command line.

   General Options
     The general options allow the user to change default settings or
     otherwise change the behaviour that is applicable to all commands.  Not
     all commands use all default settings, so some general options may not
     have an effect on all commands.

     The -p count option allows the user to change the number of partitions
     the GPT can accomodate.  This is used whenever a new GPT is created.  By
     default, the gpt utility will create space for 128 partitions (or 32
     sectors of 512 bytes).

     The -r option causes the gpt utility to open the device for reading only.
     Currently this option is primarily useful for the show command, but the
     intent is to use it to implement dry-run behaviour.

     The -v option controls the verbosity level.  The level increases with
     every occurrence of this option.  There is no formalized definition of
     the different levels yet.

     gpt add [-b number] [-i index] [-s count] [-t type] device ...
             The add command allows the user to add a new partition to an
             existing table.  By default, it will create a UFS partition
             covering the first available block of an unused disk space.  The
             command-specific options can be used to control this behaviour.

             The -b number option allows the user to specify the starting
             (beginning) sector number of the partition.  The minimum sector
             number is 1, but has to fall inside an unused region of disk
             space that is covered by the GPT.

             The -i index option allows the user to specify which (free) entry
             in the GPT table is to be used for the new partition.  By default
             the first free entry is selected.

             The -s count option allows the user to specify the size of the
             partition in sectors.  The minimum size is 1.

             The -t type option allows the user to specify the partition type.
             The type is given as an UUID, but gpt accepts efi, swap, ufs,
             linux and windows as aliases for the most commonly used partition

     gpt create [-p] device ...
             The create command allows the user to create a new (empty) GPT.

             The -p option tells gpt to create only the primary table and not
             the backup table.  This option is only useful for debugging and
             should not be used otherwise.

     gpt destroy [-r] device ...
             The destroy command allows the user to destroy an existing,
             possibly not empty GPT.

             The -r option instructs gpt to destroy the table in a way that it
             can be recovered.

     gpt migrate [-k] [-s] device ...
             The migrate command allows the user to migrate an MBR-based disk
             partitioning into a GPT-based partitioning.

             The -k option instructs gpt to not destroy the current MBR.  This
             option is primarily useful for debugging and should not be used
             by users.

             The -s option prevents migrating BSD disk labels into GPT
             partitions by creating the GPT equivalent of a slice.

     gpt remove [-b number] [-i index] [-s count] [-t type] device ...
             The remove command allows the user to remove any partitions that
             match the selection.  BEWARE: when no options are given, all GPT
             partitions will match and thus will be deleted.

             The -b number option selects the partitions that starts at the
             given number.

             The -i index option selects the partition with the given
             partition number.

             The -s count option selects all partitions that have the given
             size.  This can cause multiple partitions to be removed.

             The -t type option selects all partitions that have the given
             type.  The type is given as an UUID or by the aliases that the
             add command accepts.  This can cause multiple partitions to be

     gpt show device ...
             The show command displays the current partitioning on the listed
             devices and gives an overall view of the disk contents.

     fdisk(8), mount(8), newfs(8), swapon(8)

     The gpt utility appeared in FreeBSD 5.0 for ia64.

     The development of the gpt utility is still work in progress.  Many
     necessary features are missing or partially implemented.  In practice
     this means that the manual page, supposed to describe these features, is
     farther removed from being complete or useful.  As such, missing
     functionality is not even documented as missing.  However, it is believed
     that the currently present functionality is reliable and stable enough
     that this tool can be used without bullet-proof footware if one thinks
     one does not make mistakes.

     It is expected that the basic usage model does not change, but it is
     possible that future versions will not be compatible in the strictest
     sense of the word.  For example, the -p count option may be changed to a
     command option rather than a generic option.  There are only two commands
     that use it so there is a chance that the natural tendency for people is
     to use it as a command option.  Also, options primarily intended for
     diagnostic or debug purposes may be removed in future versions.

     Another possibility is that the current usage model is accompanied by
     other interfaces to make the tool usable as a back-end.  This all depends
     on demand and thus feedback.

FreeBSD 11.0-PRERELEASE         August 7, 2004         FreeBSD 11.0-PRERELEASE


Want to link to this manual page? Use this URL:

home | help