Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
GIT-REPACK(1)			  Git Manual			 GIT-REPACK(1)

NAME
       git-repack - Pack unpacked objects in a repository

SYNOPSIS
       git repack [-a] [-A] [-d] [-f] [-F] [-l]	[-n] [-q] [-b] [--window=<n>] [--depth=<n>]

DESCRIPTION
       This command is used to combine all objects that	do not currently
       reside in a "pack", into	a pack.	It can also be used to re-organize
       existing	packs into a single, more efficient pack.

       A pack is a collection of objects, individually compressed, with	delta
       compression applied, stored in a	single file, with an associated	index
       file.

       Packs are used to reduce	the load on mirror systems, backup engines,
       disk storage, etc.

OPTIONS
       -a
	   Instead of incrementally packing the	unpacked objects, pack
	   everything referenced into a	single pack. Especially	useful when
	   packing a repository	that is	used for private development. Use with
	   -d. This will clean up the objects that git prune leaves behind,
	   but git fsck	--full --dangling shows	as dangling.

	   Note	that users fetching over dumb protocols	will have to fetch the
	   whole new pack in order to get any contained	object,	no matter how
	   many	other objects in that pack they	already	have locally.

       -A
	   Same	as -a, unless -d is used. Then any unreachable objects in a
	   previous pack become	loose, unpacked	objects, instead of being left
	   in the old pack. Unreachable	objects	are never intentionally	added
	   to a	pack, even when	repacking. This	option prevents	unreachable
	   objects from	being immediately deleted by way of being left in the
	   old pack and	then removed. Instead, the loose unreachable objects
	   will	be pruned according to normal expiry rules with	the next git
	   gc invocation. See git-gc(1).

       -d
	   After packing, if the newly created packs make some existing	packs
	   redundant, remove the redundant packs. Also run git prune-packed to
	   remove redundant loose object files.

       -l
	   Pass	the --local option to git pack-objects.	See git-pack-
	   objects(1).

       -f
	   Pass	the --no-reuse-delta option to git-pack-objects, see git-pack-
	   objects(1).

       -F
	   Pass	the --no-reuse-object option to	git-pack-objects, see git-
	   pack-objects(1).

       -q
	   Pass	the -q option to git pack-objects. See git-pack-objects(1).

       -n
	   Do not update the server information	with git update-server-info.
	   This	option skips updating local catalog files needed to publish
	   this	repository (or a direct	copy of	it) over HTTP or FTP. See git-
	   update-server-info(1).

       --window=<n>, --depth=<n>
	   These two options affect how	the objects contained in the pack are
	   stored using	delta compression. The objects are first internally
	   sorted by type, size	and optionally names and compared against the
	   other objects within	--window to see	if using delta compression
	   saves space.	 --depth limits	the maximum delta depth; making	it too
	   deep	affects	the performance	on the unpacker	side, because delta
	   data	needs to be applied that many times to get to the necessary
	   object. The default value for --window is 10	and --depth is 50.

       --window-memory=<n>
	   This	option provides	an additional limit on top of --window;	the
	   window size will dynamically	scale down so as to not	take up	more
	   than	_n_ bytes in memory. This is useful in repositories with a mix
	   of large and	small objects to not run out of	memory with a large
	   window, but still be	able to	take advantage of the large window for
	   the smaller objects.	The size can be	suffixed with "k", "m",	or
	   "g".	 --window-memory=0 makes memory	usage unlimited. The default
	   is taken from the pack.windowMemory configuration variable. Note
	   that	the actual memory usage	will be	the limit multiplied by	the
	   number of threads used by git-pack-objects(1).

       --max-pack-size=<n>
	   Maximum size	of each	output pack file. The size can be suffixed
	   with	"k", "m", or "g". The minimum size allowed is limited to 1
	   MiB.	If specified, multiple packfiles may be	created, which also
	   prevents the	creation of a bitmap index. The	default	is unlimited,
	   unless the config variable pack.packSizeLimit is set.

       -b, --write-bitmap-index
	   Write a reachability	bitmap index as	part of	the repack. This only
	   makes sense when used with -a or -A,	as the bitmaps must be able to
	   refer to all	reachable objects. This	option overrides the setting
	   of repack.writeBitmaps. This	option has no effect if	multiple
	   packfiles are created.

       --pack-kept-objects
	   Include objects in .keep files when repacking. Note that we still
	   do not delete .keep packs after pack-objects	finishes. This means
	   that	we may duplicate objects, but this makes the option safe to
	   use when there are concurrent pushes	or fetches. This option	is
	   generally only useful if you	are writing bitmaps with -b or
	   repack.writeBitmaps,	as it ensures that the bitmapped packfile has
	   the necessary objects.

       --unpack-unreachable=<when>
	   When	loosening unreachable objects, do not bother loosening any
	   objects older than <when>. This can be used to optimize out the
	   write of any	objects	that would be immediately pruned by a
	   follow-up git prune.

       -k, --keep-unreachable
	   When	used with -ad, any unreachable objects from existing packs
	   will	be appended to the end of the packfile instead of being
	   removed. In addition, any unreachable loose objects will be packed
	   (and	their loose counterparts removed).

CONFIGURATION
       By default, the command passes --delta-base-offset option to git
       pack-objects; this typically results in slightly	smaller	packs, but the
       generated packs are incompatible	with versions of Git older than
       version 1.4.4. If you need to share your	repository with	such ancient
       Git versions, either directly or	via the	dumb http protocol, then you
       need to set the configuration variable repack.UseDeltaBaseOffset	to
       "false" and repack. Access from old Git versions	over the native
       protocol	is unaffected by this option as	the conversion is performed on
       the fly as needed in that case.

SEE ALSO
       git-pack-objects(1) git-prune-packed(1)

GIT
       Part of the git(1) suite

Git 2.13.2			  06/24/2017			 GIT-REPACK(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CONFIGURATION | SEE ALSO | GIT

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=git-repack&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help