Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
GIT-BUNDLE(1)			  Git Manual			 GIT-BUNDLE(1)

       git-bundle - Move objects and refs by archive

       git bundle create <file>	<git-rev-list-args>
       git bundle verify <file>
       git bundle list-heads <file> [<refname>...]
       git bundle unbundle <file> [<refname>...]

       Some workflows require that one or more branches	of development on one
       machine be replicated on	another	machine, but the two machines cannot
       be directly connected, and therefore the	interactive Git	protocols
       (git, ssh, http)	cannot be used.	This command provides support for git
       fetch and git pull to operate by	packaging objects and references in an
       archive at the originating machine, then	importing those	into another
       repository using	git fetch and git pull after moving the	archive	by
       some means (e.g., by sneakernet). As no direct connection between the
       repositories exists, the	user must specify a basis for the bundle that
       is held by the destination repository: the bundle assumes that all
       objects in the basis are	already	in the destination repository.

       create <file>
	   Used	to create a bundle named file. This requires the
	   git-rev-list-args arguments to define the bundle contents.

       verify <file>
	   Used	to check that a	bundle file is valid and will apply cleanly to
	   the current repository. This	includes checks	on the bundle format
	   itself as well as checking that the prerequisite commits exist and
	   are fully linked in the current repository.	git bundle prints a
	   list	of missing commits, if any, and	exits with a non-zero status.

       list-heads <file>
	   Lists the references	defined	in the bundle. If followed by a	list
	   of references, only references matching those given are printed

       unbundle	<file>
	   Passes the objects in the bundle to git index-pack for storage in
	   the repository, then	prints the names of all	defined	references. If
	   a list of references	is given, only references matching those in
	   the list are	printed. This command is really	plumbing, intended to
	   be called only by git fetch.

	   A list of arguments,	acceptable to git rev-parse and	git rev-list
	   (and	containing a named ref,	see SPECIFYING REFERENCES below), that
	   specifies the specific objects and references to transport. For
	   example, master~10..master causes the current master	reference to
	   be packaged along with all objects added since its 10th ancestor
	   commit. There is no explicit	limit to the number of references and
	   objects that	may be packaged.

	   A list of references	used to	limit the references reported as
	   available. This is principally of use to git	fetch, which expects
	   to receive only those references asked for and not necessarily
	   everything in the pack (in this case, git bundle acts like git

       git bundle will only package references that are	shown by git show-ref:
       this includes heads, tags, and remote heads. References such as
       master~1	cannot be packaged, but	are perfectly suitable for defining
       the basis. More than one	reference may be packaged, and more than one
       basis can be specified. The objects packaged are	those not contained in
       the union of the	given bases. Each basis	can be specified explicitly
       (e.g. ^master~10), or implicitly	(e.g. master~10..master,
       --since=10.days.ago master).

       It is very important that the basis used	be held	by the destination. It
       is okay to err on the side of caution, causing the bundle file to
       contain objects already in the destination, as these are	ignored	when
       unpacking at the	destination.

       Assume you want to transfer the history from a repository R1 on machine
       A to another repository R2 on machine B.	For whatever reason, direct
       connection between A and	B is not allowed, but we can move data from A
       to B via	some mechanism (CD, email, etc.). We want to update R2 with
       development made	on the branch master in	R1.

       To bootstrap the	process, you can first create a	bundle that does not
       have any	basis. You can use a tag to remember up	to what	commit you
       last processed, in order	to make	it easy	to later update	the other
       repository with an incremental bundle:

	   machineA$ cd	R1
	   machineA$ git bundle	create file.bundle master
	   machineA$ git tag -f	lastR2bundle master

       Then you	transfer file.bundle to	the target machine B. Because this
       bundle does not require any existing object to be extracted, you	can
       create a	new repository on machine B by cloning from it:

	   machineB$ git clone -b master /home/me/tmp/file.bundle R2

       This will define	a remote called	"origin" in the	resulting repository
       that lets you fetch and pull from the bundle. The $GIT_DIR/config file
       in R2 will have an entry	like this:

	   [remote "origin"]
	       url = /home/me/tmp/file.bundle
	       fetch = refs/heads/*:refs/remotes/origin/*

       To update the resulting mine.git	repository, you	can fetch or pull
       after replacing the bundle stored at /home/me/tmp/file.bundle with
       incremental updates.

       After working some more in the original repository, you can create an
       incremental bundle to update the	other repository:

	   machineA$ cd	R1
	   machineA$ git bundle	create file.bundle lastR2bundle..master
	   machineA$ git tag -f	lastR2bundle master

       You then	transfer the bundle to the other machine to replace
       /home/me/tmp/file.bundle, and pull from it.

	   machineB$ cd	R2
	   machineB$ git pull

       If you know up to what commit the intended recipient repository should
       have the	necessary objects, you can use that knowledge to specify the
       basis, giving a cut-off point to	limit the revisions and	objects	that
       go in the resulting bundle. The previous	example	used the lastR2bundle
       tag for this purpose, but you can use any other options that you	would
       give to the git-log(1) command. Here are	more examples:

       You can use a tag that is present in both:

	   $ git bundle	create mybundle	v1.0.0..master

       You can use a basis based on time:

	   $ git bundle	create mybundle	--since=10.days	master

       You can use the number of commits:

	   $ git bundle	create mybundle	-10 master

       You can run git-bundle verify to	see if you can extract from a bundle
       that was	created	with a basis:

	   $ git bundle	verify mybundle

       This will list what commits you must have in order to extract from the
       bundle and will error out if you	do not have them.

       A bundle	from a recipient repository's point of view is just like a
       regular repository which	it fetches or pulls from. You can, for
       example,	map references when fetching:

	   $ git fetch mybundle	master:localRef

       You can also see	what references	it offers:

	   $ git ls-remote mybundle

       Part of the git(1) suite

Git 2.13.2			  06/24/2017			 GIT-BUNDLE(1)


Want to link to this manual page? Use this URL:

home | help