Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
SETPGID(2)		   Linux Programmer's Manual		    SETPGID(2)

NAME
       setpgid,	getpgid, setpgrp, getpgrp - set/get process group

SYNOPSIS
       #include	<unistd.h>

       int setpgid(pid_t pid, pid_t pgid);
       pid_t getpgid(pid_t pid);

       pid_t getpgrp(void);		    /* POSIX.1 version */
       pid_t getpgrp(pid_t pid);	    /* BSD version */

       int setpgrp(void);		    /* System V	version	*/
       int setpgrp(pid_t pid, pid_t pgid);  /* BSD version */

   Feature Test	Macro Requirements for glibc (see feature_test_macros(7)):

       getpgid():
	   _XOPEN_SOURCE >= 500	|| _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED
	   || /* Since glibc 2.12: */ _POSIX_C_SOURCE >= 200809L

       setpgrp() (POSIX.1):
	   _SVID_SOURCE	|| _XOPEN_SOURCE >= 500	||
	   _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED
	   || /* Since glibc 2.19: */ _BSD_SOURCE

       setpgrp() (BSD),	getpgrp() (BSD)	[before	glibc 2.19]:
	   _BSD_SOURCE &&
	       ! (_POSIX_SOURCE	|| _POSIX_C_SOURCE || _XOPEN_SOURCE ||
		  _XOPEN_SOURCE_EXTENDED || _GNU_SOURCE	|| _SVID_SOURCE)

DESCRIPTION
       All  of	these interfaces are available on Linux, and are used for get-
       ting and	setting	the process group ID (PGID) of a  process.   The  pre-
       ferred,	POSIX.1-specified  ways	 of doing this are: getpgrp(void), for
       retrieving the calling process's	PGID; and  setpgid(),  for  setting  a
       process's PGID.

       setpgid()  sets	the  PGID of the process specified by pid to pgid.  If
       pid is zero, then the process ID	of the calling process	is  used.   If
       pgid is zero, then the PGID of the process specified by pid is made the
       same as its process ID.	If setpgid() is	used to	move  a	 process  from
       one  process  group to another (as is done by some shells when creating
       pipelines), both	process	groups must be part of the same	 session  (see
       setsid(2) and credentials(7)).  In this case, the pgid specifies	an ex-
       isting process group to be joined and the session ID of that group must
       match the session ID of the joining process.

       The POSIX.1 version of getpgrp(), which takes no	arguments, returns the
       PGID of the calling process.

       getpgid() returns the PGID of the process specified by pid.  If pid  is
       zero,  the  process ID of the calling process is	used.  (Retrieving the
       PGID of a process other than the	caller is rarely  necessary,  and  the
       POSIX.1 getpgrp() is preferred for that task.)

       The  System V-style  setpgrp(), which takes no arguments, is equivalent
       to setpgid(0, 0).

       The BSD-specific	setpgrp() call,	which takes arguments pid and pgid, is
       is a wrapper function that calls

	   setpgid(pid,	pgid)

       Since  glibc 2.19, the BSD-specific setpgrp() function is no longer ex-
       posed by	_unistd.h_; calls should be replaced with the  setpgid()  call
       shown above.

       The  BSD-specific getpgrp() call, which takes a single pid argument, is
       a wrapper function that calls

	   getpgid(pid)

       Since glibc 2.19, the BSD-specific getpgrp() function is	no longer  ex-
       posed by	_unistd.h_; calls should be replaced with calls	to the POSIX.1
       getpgrp() which takes no	arguments (if the  intent  is  to  obtain  the
       caller's	PGID), or with the getpgid() call shown	above.

RETURN VALUE
       On  success,  setpgid() and setpgrp() return zero.  On error, -1	is re-
       turned, and errno is set	appropriately.

       The POSIX.1 getpgrp() always returns the	PGID of	the caller.

       getpgid(), and the BSD-specific getpgrp() return	 a  process  group  on
       success.	 On error, -1 is returned, and errno is	set appropriately.

ERRORS
       EACCES An attempt was made to change the	process	group ID of one	of the
	      children of the calling process and the child had	 already  per-
	      formed an	execve(2) (setpgid(), setpgrp()).

       EINVAL pgid is less than	0 (setpgid(), setpgrp()).

       EPERM  An  attempt was made to move a process into a process group in a
	      different	session, or to change the process group	ID of  one  of
	      the  children of the calling process and the child was in	a dif-
	      ferent session, or to change the process group ID	of  a  session
	      leader (setpgid(), setpgrp()).

       ESRCH  For  getpgid():  pid does	not match any process.	For setpgid():
	      pid is not the calling process and not a child  of  the  calling
	      process.

CONFORMING TO
       setpgid()  and  the  version  of	getpgrp() with no arguments conform to
       POSIX.1-2001.

       POSIX.1-2001 also specifies getpgid() and the version of	setpgrp() that
       takes  no  arguments.  (POSIX.1-2008 marks this setpgrp() specification
       as obsolete.)

       The version of getpgrp()	with one argument and the version of setpgrp()
       that  takes  two	arguments derive from 4.2BSD, and are not specified by
       POSIX.1.

NOTES
       A child created via fork(2) inherits its	 parent's  process  group  ID.
       The PGID	is preserved across an execve(2).

       Each  process group is a	member of a session and	each process is	a mem-
       ber of the session of which its process group is	a member.

       A session can have a controlling	terminal.  At any time,	one (and  only
       one) of the process groups in the session can be	the foreground process
       group for the terminal; the remaining process groups are	in  the	 back-
       ground.	 If  a signal is generated from	the terminal (e.g., typing the
       interrupt key to	generate SIGINT), that signal is  sent	to  the	 fore-
       ground process group.  (See termios(3) for a description	of the charac-
       ters that generate signals.)  Only the  foreground  process  group  may
       read(2)	from  the  terminal;  if  a  background	process	group tries to
       read(2) from the	terminal, then the group is  sent  a  SIGTTIN  signal,
       which  suspends	it.   The  tcgetpgrp(3)	and tcsetpgrp(3) functions are
       used to get/set the foreground process group of the controlling	termi-
       nal.

       The  setpgid() and getpgrp() calls are used by programs such as bash(1)
       to create process groups	in order to implement shell job	control.

       If a session has	a controlling terminal,	and the	CLOCAL flag  for  that
       terminal	 is  not  set,	and a terminal hangup occurs, then the session
       leader is sent a	SIGHUP.	 If the	session	leader exits,  then  a	SIGHUP
       signal  will  also  be  sent  to	each process in	the foreground process
       group of	the controlling	terminal.

       If the exit of the process causes a process group to  become  orphaned,
       and  if any member of the newly orphaned	process	group is stopped, then
       a SIGHUP	signal followed	by a SIGCONT  signal  will  be	sent  to  each
       process in the newly orphaned process group.  An	orphaned process group
       is one in which the parent of every member of process group  is	either
       itself  also  a member of the process group or is a member of a process
       group in	a different session (see also credentials(7)).

SEE ALSO
       getuid(2), setsid(2), tcgetpgrp(3), tcsetpgrp(3),  termios(3),  creden-
       tials(7)

COLOPHON
       This  page  is  part of release 3.74 of the Linux man-pages project.  A
       description of the project, information about reporting bugs,  and  the
       latest	  version     of     this    page,    can    be	   found    at
       http://www.kernel.org/doc/man-pages/.

Linux				  2014-01-07			    SETPGID(2)

NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | CONFORMING TO | NOTES | SEE ALSO | COLOPHON

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=getpgrp&sektion=2&manpath=Debian+8.1.0>

home | help