Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
GEOCPSET(1)			     HUGIN			   GEOCPSET(1)

NAME
       geocpset	- adds control points based on geometric position

SYNOPSIS
       geocpset	[-o output.pto]	input.pto

DESCRIPTION
       geocpset	is a tool for panoramas	which contains featureless images,
       e.g.  sky images. In this images	a control point	detector does not find
       control points. geocpset	analyses the positions of the images in
       project files.  Then it adds control points to these images which are
       not connected by	control	points.	The control points are set only	be the
       geometric positions of the images and not by the	image content. So
       geocpset	should only used with projects which have assigned rough image
       positions.

USAGE
	geocpset -o output.pto input.pto

       If the --output/-o switch is missing then the suffix "_geo" is added to
       the filename.

       The indented workflow is

       #1 First	create project file
	   pto_gen -o project.pto *.jpg

       #2 Then assign rough positions to images
	   pto_var --set y=i*20-40,p=0,r=0 -o project.pto project.pto

       #3 Now run a "normal" control point detector, e.g. only on overlapping
       images
	   cpfind --prealigned -o project.pto project.pto

       #4 And finally connect all unconnected images
	   geocpset -o project.pto project.pto

OPTIONS
       -o|--output output.pto
	   Output a pto	file with the given filename. If not given it will
	   append "_geo" to the	input filename.

       -e|--each-overlap
	   By default geocpset adds only control points	to unconnected images.
	   With	this switch you	can force to add a geometric control point to
	   each	overlap, which is not connect by control points	or linked with
	   image positions.

       --min-overlap=NUM
	   By default geocpset takes only image	pairs into account which
	   overlap more	than 10	%. If you have very narrow overlaps you	can
	   decrease this value to take also such small overlaps	into account,
	   e.g.	 --min-overlap=1

       -h|--help
	   Display help.

AUTHORS
       geocpset	was written by Thomas Modes. This manpages was generated by
       converting the wiki-page	on <http://wiki.panotools.org/>	to pod-format
       by Andreas Metzler.

"Version: 2019.2.0"		  2013-03-09			   GEOCPSET(1)

NAME | SYNOPSIS | DESCRIPTION | USAGE | OPTIONS | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=geocpset&sektion=1&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help