Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
GEN_PACKETS(1)		    General Commands Manual		GEN_PACKETS(1)

NAME
       gen_packets - Generate audio file for AX.25 frames.

SYNOPSIS
       gen_packets -o wav-file-out [ options ] [ text-file | - ]

	      wav-file-out is the result.  The -o option is required.

	      text-file	 may  contain AX.25 packets in the standard monitoring
	      format.  Use "-" to read from stdin.  If not  specified,	a  de-
	      fault builtin message will be used.

DESCRIPTION
       gen_packets  is	a  test	application which converts text	to AX.25 audio
       for testing packet decoders.

       It is very flexible allowing a wide range of audio sample  rates,  data
       speeds,	and  AFSK  tones.  It will even	generate the scrambled signals
       commonly	used for 9600 baud operation.

OPTIONS
       -a n   Signal amplitude in range	of 0 - 200%.  Default 50.   Note  that
	      100%  is	corresponds  to	 signal	 peaks of +/- 16383 so we have
	      plenty of	headroom to avoid saturation.

       -b n   Bits / second for	data.  Default is 1200.

       -B n   Bits / second for	data.  Proper modem selected  for  300,	 1200,
	      9600.

       -g     Scrambled	baseband rather	than AFSK.

       -m n   Mark frequency.  Default is 1200.

       -s n   Space frequency.	Default	is 2200.

       -r n   Audio sample Rate.  Default is 44100.

       -n n   Generate specified number	of frames with increasing noise.  (For
	      built-in message only.)

       -o file
	      Send output to .wav file.

       -8     8	bit audio rather than 16.

       -2     2	channels of audio rather than 1.

EXAMPLES
       gen_packets -o x.wav

	      With all defaults, a built-in test  message  is  generated  with
	      standard Bell 202	tones used for packet radio on ordinary	VHF FM
	      transceivers.

       gen_packets -o x.wav -g -b 9600
       gen_packets -o x.wav -B 9600

	      Both of these are	equivalent.  "-B 9600"	automatically  selects
	      scrambled	baseband rather	than AFSK.

       gen_packets -o x.wav -m 1600 -s 1800 -b 300
       gen_packets -o x.wav -B 300

	      Both  of	these generate 200 Hz shift, 300 baud, suitable	for HF
	      SSB transceiver.

       echo -n 'WB2OSZ>WORLD:Hello, world!' | gen_packets -a 25	-o x.wav -
       atest x.wav

	      Read message from	stdin and put quarter volume  sound  into  the
	      file x.wav.  Decode the sound file.

SEE ALSO
       More   detailed	 information   is   in	 the  pdf  files  in  /usr/lo-
       cal/share/doc/direwolf, or possibly /usr/share/doc/direwolf,  depending
       on installation location.

       Applications  in	 this package: aclients, atest,	decode_aprs, direwolf,
       gen_packets, ll2utm, log2gpx, text2tt, tt2text, utm2ll

								GEN_PACKETS(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=gen_packets&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help