Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
GAMMU(1)			     Gammu			      GAMMU(1)

NAME
       gammu - Does some neat things with your cellular	phone or modem.

SYNOPSIS
	  gammu	[parameters] <command> [options]

       Commands	 actually  indicate which operation should Gammu perform. They
       can be specified	with or	without	a leading --.

DESCRIPTION
       This program is a tool for mobile phones. Many vendors and  phones  are
       supported, for actual listing see Gammu Phones Database.

   Options
       Parameters before command configure gammu behaviour:

       -c, --config <filename>
	      name of configuration file (see gammurc)

       -s, --section <confign>
	      section of config	file to	use, eg. 42

       -d, --debug <level>
	      debug level (see LogFormat in gammurc for	possible values)

       -f, --debug-file	<filename>
	      file for logging debug messages

   Call	commands
       answercall [id]
	      Answer incoming call.

       cancelcall [id]
	      Cancel incoming call

       canceldiverts
	      Cancel all existing call diverts.

       conferencecall id
	      Initiates	a conference call.

       dialvoice number	[show|hide]
	      Make voice call from SIM card line set in	phone.

	      show|hide	 -  optional  parameter	whether	to disable call	number
	      indication.

       divert  get|set	all|busy|noans|outofreach  all|voice|fax|data  [number
       timeout]
	      Manage or	display	call diverts.

	      get or set
		     whether to	get divert information or to set it.

	      all or busy or noans or outofreach
		     condition when apply divert

	      all or voice or fax or data
		     call type when apply divert

	      number number where to divert

	      timeout
		     timeout when the diversion	will happen

       getussd code
	      Retrieves	 USSD  information  - dials a service number and reads
	      response.

       holdcall	id
	      Holds call.

       maketerminatedcall number length	[show|hide]
	      Make voice call from SIM card line set in	phone  which  will  be
	      terminated after length seconds.

       senddtmf	sequence
	      Plays DTMF sequence. In some phones available only during	calls

       splitcall id
	      Splits call.

       switchcall [id]
	      Switches call.

       transfercall [id]
	      Transfers	call.

       unholdcall id
	      Unholds call.

   SMS and EMS commands
       Sending	messages might look a bit complicated on first attempt to use.
       But be patient, the command line	has been written in order to allow al-
       most every usage. See EXAMPLE section for some hints on usage.

       There  is also an option	to use gammu-smsd when you want	to send	or re-
       ceive more messages and process them automatically.

   Introduction	to SMS formats
       Gammu has support for many SMS formats like:

       Nokia Smart Messaging
	      used for monochromatic picture  images,  downloadable  profiles,
	      monochromatic  operator  logos,  monochromatic  caller logos and
	      monophonic ringtones

       Linked SMS
	      both with	8 and 16-bit identification numbers in headers

       EMS    this is SMS format used for saving monochromatic	images,	 mono-
	      phonic ringtones,	animations, text formatting and	others

       MMS notifications
	      contains links where phone should	download MMS

       Alcatel logo messages
	      proprietary format for logos

       You need	to ensure that the target phone	supports message type you want
       to send.	Otherwise the phone will not be	able to	 display  it  or  will
       even crash, because firmware of phone did not expect this possibility.

   Encoding chars in SMS text
       Text in SMS can be coded	using two ways:

   GSM Default Alphabet
       With GSM	Default	Alphabet you can fit at	most 160 chars into single SMS
       (Gammu doesn't support compressing such texts according	to  GSM	 stan-
       dards,  but  it isn't big limit,	because	there are no phones supporting
       them), but they're from limited set:

       o all Latin small and large

       o all digits

       o some Greek

       o some other national

       o some symbols like  @ !	" # & /	( ) % *	+ = - ,	. : ; <	> ?

       o few others

   Unicode
       With Unicode single SMS can contain at most 70 chars, but these can  be
       any chars including all national	and special ones.

       WARNING:
	  Please  note,	 that some older phones	might have problems displaying
	  such message.

   Conversion
       Gammu tries to do the best to handle non	ASCII characters in your  mes-
       sage.   Everything  is internally handled in Unicode (the input is con-
       verted depending	on your	locales	configuration)	and  in	 case  message
       uses Unicode the	text will be given as such to the message.

       Should  the  message be sent in GSM Default Alphabet, Gammu will	try to
       convert all characters to keep message  readable.  Gammu	 does  support
       multi  byte encoding for	some characters	in GSM Default Alphabet	(it is
       needed for ^ { }	\ [ ] ~	|). The	characters which are  not  present  in
       GSM  Default  Alphabet  are  transliterated to closest ASCII equivalent
       (accents	are removed).  Remaining not known characters are replaced  by
       question	mark.

   SMS commands
       addsmsfolder name

       deleteallsms folder
	      Delete all SMS from specified SMS	folder.

       deletesms folder	start [stop]
	      Delete SMS from phone. See description for gammu getsms for info
	      about sms	folders	naming convention.

	      Locations	are numerated from 1.

       displaysms ... (options like in sendsms)
	      Displays PDU data	of encoded SMS messages. It accepts  same  pa-
	      rameters and behaves same	like sendsms.

       getallsms -pbk
	      Get  all	SMS  from phone. In some phones	you will have also SMS
	      templates	and info about locations used to save Picture  Images.
	      With each	sms you	will see location. If you want to get such sms
	      from phone alone,	use gammu getsms.

       geteachsms -pbk
	      Similiary	to gammu getallsms. Difference is, that	links all con-
	      catenated	sms

       getsms folder start [stop]
	      Get SMS.

	      Locations	are numerated from 1.

	      Folder  0	 means	that sms is being read from "flat" memory (all
	      sms from all folders have	unique numbers). It's  sometimes  emu-
	      lated by Gammu. You can use it with all phones.

	      Other folders like 1, 2, etc. match folders in phone such	as In-
	      box, Outbox, etc.	 and each sms has unique number	in his folder.
	      Name  of folders can depend on your phone	(the most often	1="In-
	      box", 2="Outbox",	etc.).	This method is not  supported  by  all
	      phones  (for  example, not supported by Nokia 3310, 5110,	6110).
	      If work with your	phone, use gammu getsmsfolders to get  folders
	      list.

       getsmsc [start [stop]]
	      Get SMSC settings	from SIM card.

	      Locations	are numerated from 1.

       getsmsfolders
	      Get names	for SMS	folders	in phone

       savesms	TYPE  [type  parameters] [type options]	[-folder id] [-unread]
       [-read] [-unsent] [-sent] [-sender number]  [-smsname  name]  [-smscset
       number] [-smscnumber number] [-reply] [-maxsms num]
	      Saves SMS	to phone, see below for	TYPE options.

		 -smscset number
			SMSC  number will be taken from	phone stored SMSC con-
			figuration number.

			Default: 1

		 -smscnumber number
			SMSC number

		 -reply	reply SMSC is set

		 -folder number
			save to	specified folder.

			Folders	are numerated from 1.

			The most often folder 1	= "Inbox", 2  =	 "Outbox",etc.
			Use gammu getsmsfolders	to get folder list.

		 -unread
			makes  message	unread.	In some	phones (like 6210) you
			won't see unread sms envelope after saving  such  sms.
			In  some  phones  with internal	SMS memory (like 6210)
			after using it with folder 1 SIM SMS  memory  will  be
			used

		 -read	makes  message	read. In some phones with internal SMS
			memory (like 6210) after using it with	folder	1  SIM
			SMS memory will	be used

		 -unsent
			makes message unsent

		 -sent	makes message sent

		 -smsname name
			set message name

		 -sender number
			set sender number (default: Gammu)

		 -maxsms num
			Limit  maximum	number	of messages which will be cre-
			ated. If there are more	messages, Gammu	will terminate
			with failure.

		 Types of messages:

		 ANIMATION frames file1	file2...
			Save an	animation as a SMS. You	need to	give number of
			frames and picture for each frame. Each	picture	can be
			in  any	 picture format	which Gammu supports (B/W bmp,
			gif, wbmp, nol,	nlm...).

		 BOOKMARK file location
			Read WAP bookmark from file created  by	 gammu	backup
			command	and saves in Nokia format as SMS

		 CALENDAR file location
			Read  calendar	note from file created by gammu	backup
			command	and saves in VCALENDAR 1.0 format as SMS.  The
			location  identifies  position	of calendar item to be
			read in	backup file (usually 1,	but can	be  useful  in
			case the backup	contains more items).

		 CALLER	file
			Save  caller  logo  as	sms in Nokia (Smart Messaging)
			format - size 72x14, two colors.

			WARNING:
			    Please note, that it isn't designed	for colour lo-
			    gos	 available for example in DCT4/TIKU - you need
			    to	put  bitmap  file  there  inside  phone	 using
			    filesystem commands.

		 USSD	Send USSD query	instead	of SMS.

			New in version 1.38.5.

		 EMS  [-unicode]  [-16bit]  [-format  lcrasbiut]  [-text text]
		 [-unicodefiletext file]  [-defsound  ID]  [-defanimation  ID]
		 [-tone10 file]	[-tone10long file] [-tone12 file] [-tone12long
		 file] [-toneSE	file] [-toneSElong file]  [-fixedbitmap	 file]
		 [-variablebitmap file]	[-variablebitmaplong file] [-animation
		 frames	file1 ...] [-protected number]
			Saves EMS sequence.  All  format  specific  parameters
			(like -defsound) can be	used few times.

			-text  adds text

			-unicodefiletext
			       adds text from Unicode file

			-defanimation
			       adds  default  animation	 with  ID specified by
			       user. ID	for different phones are different.

			-animation
			       adds "frames" frames read  from	file1,	file2,
			       etc.

			-defsound
			       adds  default  sound with ID specified by user.
			       ID for different	phones are different.

			-tone10
			       adds IMelody version  1.0  read	from  RTTL  or
			       other compatible	file

			-tone10long
			       IMelody	version	 1.0  saved  in	one of few SMS
			       with UPI.  Phones  compatible  with  UPI	 (like
			       Sony-Ericsson  phones)  will read such ringtone
			       as one

			-tone12
			       adds IMelody version  1.2  read	from  RTTL  or
			       other compatible	file

			-tone12long
			       IMelody	version	 1.2  saved  in	one of few SMS
			       with UPI.  Phones  compatible  with  UPI	 (like
			       Sony-Ericsson  phones)  will read such ringtone
			       as one

			-toneSE
			       adds  IMelody  in  "short"  form	 supported  by
			       Sony-Ericsson phones

			-toneSElong
			       add  Sony-Ericsson  IMelody saved in one	or few
			       SMS with	UPI

			-variablebitmap
			       bitmap in any size saved	in one SMS

			-variablebitmaplong
			       bitmap with maximum size	96x128 saved in	one or
			       few sms

			-fixedbitmap
			       bitmap 16x16 or 32x32

			-protected
			       all  ringtones and bitmaps after	this parameter
			       (excluding default ringtones and	logos) will be
			       "protected" (in phones compatible with ODI like
			       SonyEricsson products it	won't be  possible  to
			       forward them from phone menu)

			-16bit Gammu  uses SMS headers with 16-bit numbers for
			       saving linking info in SMS (it means less chars
			       available for user in each SMS)

			-format	lcrasbiut
			       last text will be formatted. You	can use	combi-
			       nations of chars:

				      +----------+--------------------+
				      |Character | Formating	      |
				      +----------+--------------------+
				      |l	 | left	aligned	      |
				      +----------+--------------------+
				      |c	 | centered	      |
				      +----------+--------------------+
				      |r	 | right aligned      |
				      +----------+--------------------+
				      |a	 | large font	      |
				      +----------+--------------------+
				      |s	 | small font	      |
				      +----------+--------------------+
				      |b	 | bold	font	      |
				      +----------+--------------------+
				      |i	 | italic font	      |
				      +----------+--------------------+

				      |u	 | underlined font    |
				      +----------+--------------------+
				      |t	 | strikethrough font |
				      +----------+--------------------+

		 MMSINDICATOR URL Title	Sender
			Creates	a MMS indication SMS. It  contains  URL	 where
			the  actual  MMS  payload  is stored which needs to be
			SMIL encoded. The phone	usually	downloads the MMS data
			using special APN, which does not count	to transmitted
			data, however there might be  limitations  which  URLs
			can be accessed.

		 MMSSETTINGS file location
			Saves a	message	with MMS configuration.	The configura-
			tion will be read from Gammu backup  file  from	 given
			location.

		 OPERATOR file [-netcode netcode] [-biglogo]
			Save  operator	logo as	sms in Nokia (Smart Messaging)
			format - size 72x14 in two colors.

			-biglogo
			       Use 78x21 formatted logo	 instead  of  standard
			       72x14.

			NOTE:
			    This isn't designed	for colour logos available for
			    example in newer phones - you need to  put	bitmap
			    file there inside phone using filesystem commands.

		 PICTURE file [-text text] [-unicode] [-alcatelbmmi]
			Read  bitmap  from  2 colors file (bmp,	nlm, nsl, ngg,
			nol, wbmp, etc.), format into bitmap in	Smart  Messag-
			ing  (72x28,  2	colors,	called often Picture Image and
			saved with text) or Alcatel format and send/save  over
			SMS.

		 PROFILE [-name	name] [-bitmap bitmap] [-ringtone ringtone]
			Read  ringtone	(RTTL)	format,	 bitmap	(Picture Image
			size) and name,	format into  Smart  Messaging  profile
			and send/save as SMS.

			WARNING:
			    Please  note,  that	 this  format  is abandoned by
			    Nokia and supported	by some	(older)	 devices  only
			    like Nokia 3310.

		 RINGTONE file [-long] [-scale]
			Read  RTTL  ringtone  from  file  and save as SMS into
			SIM/phone memory. Ringtone is saved  in	 Nokia	(Smart
			Messaging) format.

			-long  ringtone	 is  saved using Profile style.	It can
			       be longer (and saved in	2  SMS),  but  decoded
			       only by newer phones (like 33xx)

			-scale ringtone	will have Scale	info for each note. It
			       will allow one to edit it  correctly  later  in
			       phone composer (for example, in 33xx)

		 SMSTEMPLATE  [-unicode]  [-text text] [-unicodefiletext file]
		 [-defsound ID]	[-defanimation ID] [-tone10 file] [-tone10long
		 file]	 [-tone12  file]  [-tone12long	file]  [-toneSE	 file]
		 [-toneSElong file] [-variablebitmap  file]  [-variablebitmap-
		 long file] [-animation	frames file1 ...]
			Saves a	SMS template (for Alcatel phones).

		 TEXT  [-inputunicode]	[-16bit] [-flash] [-len	len] [-autolen
		 len] [-unicode] [-enablevoice]	 [-disablevoice]  [-enablefax]
		 [-disablefax] [-enableemail] [-disableemail] [-voidsms] [-re-
		 placemessages ID] [-replacefile file] [-text msgtext]	[-tex-
		 tutf8 msgtext]
			Take  text  from stdin (or commandline if -text	speci-
			fied) and save as text SMS into	SIM/phone memory.

			-flash Class 0 SMS (should be displayed	after  receiv-
			       ing  on recipients' phone display after receiv-
			       ing without entering Inbox)

			-len len
			       specify,	how many chars will be read. When  use
			       this option and text will be longer than	1 SMS,
			       will be split into more linked SMS

			-autolen len
			       specify,	how many chars will be read. When  use
			       this option and text will be longer than	1 SMS,
			       will be split into more linked SMS.Coding  type
			       (SMS default alphabet/Unicode) is set according
			       to input	text

			-enablevoice
			       sms will	set voice mail indicator. Text will be
			       cut to 1	sms.

			-disablevoice
			       sms  will  not  set  voice mail indicator. Text
			       will be cut to 1	sms.

			-enablefax
			       sms will	set fax	indicator. Text	will be	cut to
			       1 sms.

			-disablefax
			       sms  will  not  set fax indicator. Text will be
			       cut to 1	sms.

			-enableemail
			       sms will	set email indicator. Text will be  cut
			       to 1 sms.

			-disableemail
			       sms  will not set email indicator. Text will be
			       cut to 1	sms.

			-voidsms
			       many phones after receiving  it	won't  display
			       anything,  only beep, vibrate or	turn on	light.
			       Text will be cut	to 1 sms.

			-unicode
			       SMS will	be saved in Unicode format

			       NOTE:
				   The ~ char in SMS text and -unicode	option
				   (Unicode coding required) can cause text of
				   SMS after ~	char   blink  in  some	phones
				   (like Nokia 33xx).

			-inputunicode
			       input text is in	Unicode.

			       NOTE:
				   You	can  create Unicode file using WordPad
				   in Windows (during saving  select  "Unicode
				   Text	Document" format). In Unix can use for
				   example YUdit or vim.

			-text  get text	from command line instead of stdin.

			-textutf8
			       get text	in UTF-8 from command line instead  of
			       stdin.

			       NOTE:
				   Gammu  detects your locales and uses	by de-
				   fault encoding based	on this. Use this  op-
				   tion	 only  when you	know the input will be
				   in UTF-8 in all cases.

			-16bit Gammu uses SMS headers with 16-bit numbers  for
			       saving linking info in SMS (it means less chars
			       available for user in each SMS)

			-replacemessages ID
			       ID can be 1..7. When you	will  use  option  and
			       send  more single SMS to	one recipient with the
			       same ID,	each another  SMS  will	 replace  each
			       previous	with the same ID

			-replacefile file
			       File with replacement table in unicode (UCS-2),
			       preferably with byte order mark (BOM). It  con-
			       tains  pairs of chars, first one	is to replace,
			       second is replacement one. The  replacement  is
			       done after reading text for the message.

			       For  example  replacement  1  (0x0061)  with  a
			       (0x0031)	would be done by file  with  following
			       content (hex dump, first	two bytes is BOM):

				   ff fe 61 00 31 00

		 TODO file location
			Saves a	message	with a todo entry. The content will be
			read from any backup format which Gammu	 supports  and
			from given location.

		 VCARD10|VCARD21 file SM|ME location [-nokia]
			Read phonebook entry from file created by gammu	backup
			command	and saves in VCARD 1.0 (only name and  default
			number)	 or VCARD 2.1 (all entry details with all num-
			bers, text and name)  format  as  SMS.	 The  location
			identifies  position  of  contact  item	 to be read in
			backup file (usually 1,	but can	be useful in case  the
			backup contains	more items).

		 WAPINDICATOR URL Title
			Saves  a  SMS  with a WAP indication for given URL and
			title.

		 WAPSETTINGS file location DATA|GPRS
			Read WAP settings from file created  by	 gammu	backup
			command	and saves in Nokia format as SMS

       sendsms	TYPE  destination  [type  parameters] [type options] [-smscset
       number]	 [-smscnumber	number]	   [-reply]    [-report]    [-validity
       HOUR|6HOURS|DAY|3DAYS|WEEK|MAX] [-save [-folder number]]
	      Sends  a	message	 to  a destination number, most	parameters are
	      same as for gammu	savesms.

	      -save  will also save message which is being sent

	      -report
		     request delivery report for message

	      -validity	HOUR|6HOURS|DAY|3DAYS|WEEK|MAX
		     sets how long will	be the message valid  (SMSC  will  the
		     discard  the  message after this time if it could not de-
		     liver it).

       setsmsc location	number
	      Set SMSC settings	on SIM card. This keeps	all SMSC configuration
	      intact, it just changes the SMSC number.

	      Locations	are numerated from 1.

   Memory (phonebooks and calls) commands
   Memory types
       Gammu recognizes	following memory types:

       DC     Dialled calls

       MC     Missed calls

       RC     Received calls

       ON     Own numbers

       VM     voice mailbox

       SM     SIM phonebook

       ME     phone internal phonebook

       FD     fixed dialling

       SL     sent SMS log

   Memory commands
       deleteallmemory DC|MC|RC|ON|VM|SM|ME|MT|FD|SL
	      Deletes all entries from specified memory	type.

	      For memory types description see Memory types.

       deletememory DC|MC|RC|ON|VM|SM|ME|MT|FD|SL start	[stop]
	      Deletes entries in specified range from specified	memory type.

	      For memory types description see Memory types.

       getallmemory DC|MC|RC|ON|VM|SM|ME|MT|FD|SL
	      Get all memory locations from phone.

	      For memory types description see Memory types.

       getmemory DC|MC|RC|ON|VM|SM|ME|MT|FD|SL start [stop [-nonempty]]
	      Get memory location from phone.

	      For memory types description see Memory types.

	      Locations	are numerated from 1.

       getspeeddial start [stop]
	      Gets speed dial choices.

       searchmemory text
	      Scans all	memory entries for given text. It performs case	insen-
	      sitive substring lookup. You can interrupt searching by pressing
	      Ctrl+C.

   Filesystem commands
       Gammu  allows  one  to  access phones using native protocol (Nokias) or
       OBEX. Your phone	can also support usb storage, which is handled on  the
       operating system	level and Gammu	does not use that.

       addfile folderID	name [-type JAR|BMP|PNG|GIF|JPG|MIDI|WBMP|AMR|3GP|NRT]
       [-readonly] [-protected]	[-system] [-hidden] [-newtime]
	      Add file with specified name to folder with specified folder ID.

	      -type  File type was required for	filesystem 1 in	 Nokia	phones
		     (current filesystem 2 doesn't need	this).

	      -readonly
		     Sets the read only	attribute.

	      -protected
		     Sets  the	protected attribute (file can't	be for example
		     forwarded from phone menu).

	      -system
		     Sets the system attribute.

	      -hidden
		     Sets the hidden attribute	(file  is  hidden  from	 phone
		     menu).

	      -newtime
		     After using it date/time of file modification will	be set
		     to	moment of uploading.

       addfolder parentfolderID	name
	      Create a folder in phone with specified name in  a  folder  with
	      specified	folder ID.

       deletefiles fileID
	      Delete files with	given IDs.

       deletefolder name
	      Delete folder with given ID.

       getfilefolder fileID, fileID
	      Retrieve	files  or  all files from folder with given IDs	from a
	      phone filesytem.

       getfiles	fileID,	fileID
	      Retrieve files with given	IDs from a phone filesytem.

       getfilesystem [-flatall|-flat]
	      Display info about all folders and files in phone	 memory/memory
	      card. By default there is	tree displayed,	you can	change it:

	      -flatall
		     there  are	 displayed  full  file/folder  details like ID
		     (first parameter in line)

	      -flat

	      NOTE:
		 In some phones	(like N6230) content  of  some	folders	 (with
		 more files) can be cut	(only part of files will be displayed)
		 for example on	infrared connection. This is not Gammu	issue,
		 but phone firmware problem.

       getfilesystemstatus
	      Display info filesystem status - number of bytes available, used
	      or used by some specific content.

       getfolderlisting	folderID
	      Display files and	folders	available in folder with given	folder
	      ID. You can get ID's using getfilesystem -flatall.

	      WARNING:
		 Please	note, that in some phones (like	N6230) content of some
		 folders (with more files) can be cut (only part of files will
		 be displayed) for example on infrared connection. This	is not
		 Gammu issue, but phone	firmware problem.

       getrootfolders
	      Display info about drives	available in phone/memory card.

       sendfile	name
	      Sends file to a phone. It's up to	phone to decide	where to store
	      this  file and how to handle it (for example when	you send vCard
	      or vCalendar, most of phones will	offer you to import it.

       setfileattrib folderID [-system]	[-readonly] [-hidden] [-protected]

   Logo	and pictures commands
       These options are mainly	(there are few exceptions)  for	 monochromatic
       logos  and  images  available in	older phones. Recognized file formats:
       xpm (only saving), 2-colors bmp,	nlm, nsl, ngg,	nol,  wbmp,  gif  (for
       Samsung).

       In  new	models	all bitmaps are	saved in filesystem and	should go into
       filesystem section

       copybitmap inputfile [outputfile	[OPERATOR|PICTURE|STARTUP|CALLER]]
	      Allow one	to convert logos files to another. When	give ONLY  in-
	      putfile,	output will be written to stdout using ASCII art. When
	      give output file and format, in some  file  formats  (like  NLM)
	      will be set indicator informing about logo type to given.

       getbitmap TYPE [type options]
	      Reads bitmap from	phone, following types are supported:

	      CALLER location [file]
		     Get caller	group logo from	phone. Locations 1-5.

	      DEALER In	 some models it's possible to save dealer welcome note
		     - text displayed during enabling phone,  which  can't  be
		     edited from phone menu.  Here you can get it.

	      OPERATOR [file]
		     Get  operator logo	(picture displayed instead of operator
		     name) from	phone.

	      PICTURE location [file]
		     Get Picture Image from phone.

	      STARTUP [file]
		     Get static	startup	logo from phone. Allow one to save  it
		     in	file.

	      TEXT   Get startup text from phone.

       setbitmap TYPE [type options]
	      Sets bitmap in phone, following types are	supported:

	      CALLER location [file]
		     Set caller	logo.

	      COLOUROPERATOR [fileID [netcode]]
		     Sets color	operator logo in phone.

	      COLOURSTARTUP [fileID]

	      DEALER text
		     Sets  welcome message configured by dealer, which usually
		     can not be	changed	in phone menus.

	      OPERATOR [file [netcode]]
		     Set operator logo in phone. When won't give file and net-
		     code, operator logo will be removed from phone. When will
		     give only filename, operator logo will be	displayed  for
		     your  current  GSM	 operator.  When you give additionally
		     network code, it will be displayed	for this operator.

	      PICTURE file location [text]
		     Sets picture image	in phone.

	      STARTUP file|1|2|3
		     Set startup logo in phone.	It can	be  static  (then  you
		     will  have	 to  give file name) or	one of predefined ani-
		     mated (only some phones like Nokia	3310 or	3330  supports
		     it, use location 1, 2 or 3	for these).

	      TEXT text
		     Sets startup text in phone.

	      WALLPAPER	fileID
		     Sets wallpaper in phone.

   Ringtones commands
       Ringtones are mostly supported only for older phones. For recent	phones
       you usually just	upload them to some folder in phone filesystem.

       There are recognized various file formats by options  described	below:
       rttl, binary format created for Gammu, mid (saving), re (reading), ott,
       communicator, ringtones format found in fkn.pl, wav  (saving),  ime/imy
       (saving), rng, mmf (for Samsung).

       copyringtone source destination [RTTL|BINARY]
	      Copy source ringtone to destination.

       getphoneringtone	location [file]
	      Get one of "default" ringtones and saves into file

       getringtone location [file]
	      Get ringtone from	phone in RTTL or BINARY	format.

	      Locations	are numerated from 1.

       getringtoneslist

       playringtone file
	      Play approximation of ringtone over phone	buzzer.	File can be in
	      RTTL or BINARY (Nokia DCT3) format.

       playsavedringtone number
	      Play one of built-in ringtones. This  option  is	available  for
	      DCT4 phones.  For	getting	ringtones list use gammu getringtones-
	      list.

       setringtone file	[-location location] [-scale] [-name name]
	      Set ringtone in phone. When don't	 give  location,  it  will  be
	      written  "with  preview" (in phones supporting this feature like
	      61xx or 6210).

	      -scale Scale information will be added  to  each	note  of  RTTL
		     ringtone.	It  will avoid scale problems available	during
		     editing ringtone in composer from phone menu  (for	 exam-
		     ple, in Nokia 33xx).

	      NOTE:
		 When  use ~ char in ringtone name, in some phones (like 33xx)
		 name will blink later in phone	menus.

   Calendar notes commands
       In Nokia	3310, 3315 and 3330 these are named "Reminders"	and have  some
       limitations (depending on phone firmware	version).

       deletecalendar start [stop]
	      Deletes selected calendar	entries	in phone.

       getallcalendar
	      Retrieves	all calendar entries from phone.

       getcalendar start [stop]
	      Retrieves	selected calendar entries from phone.

   To do list commands
       deletetodo start	[stop]
	      Deletes selected todo entries in phone.

       getalltodo
	      Retrieves	all todo entries from phone.

       gettodo start [stop]
	      Retrieves	selected todo entries from phone.

   Notes commands
       getallnotes
	      Reads all	notes from the phone.

	      NOTE:
		 Not  all  phones supports this	function, especially most Sony
		 Ericsson phones even if they have notes inside	phone.

   Date, time and alarm	commands
       getalarm	[start]
	      Get alarm	from phone, if no location is specified, 1 is used.

       getdatetime
	      Get date and time	from phone

       setalarm	hour minute
	      Sets repeating alarm in phone on selected	time.

       setdatetime [HH:MM[:SS]]	[YYYY/MM/DD]
	      Set date and time	in phone to date and  time  set	 in  computer.
	      Please  note,  that  this	 option	 doesn't  show	clock on phone
	      screen. It only set date and time.

	      NOTE:
		 You can make such synchronization each	time, when  will  con-
		 nect your phone and use Gammu.	See SynchronizeTime in gammurc
		 for details.

   Categories commands
       NOTE:
	  Categories are supported only	on few phones (Alcatel).

       addcategory TODO|PHONEBOOK text

       getallcategory TODO|PHONEBOOK

       getcategory TODO|PHONEBOOK start	[stop]

       listmemorycategory text|number

       listtodocategory	text|number

   Backing up and restoring commands
       addnew file [-yes] [-memory ME|SM|..]
	      Adds data	written	in file	created	using  gammu  backup  command.
	      All  things  backed  up  gammu backup can	be restored (when made
	      backup to	Gammu text file).

	      Please note that this adds all content of	backup file  to	 phone
	      and does not care	about current data in the phone	(no duplicates
	      are detected).

	      Use -yes parameter to answer yes to all questions	(you  want  to
	      automatically restore all	data).

	      Use  -memory parameter to	force usage of defined memory type for
	      storing entries regardless what backup format says.

       addsms folder file [-yes]
	      Adds SMSes from file (format like	gammu backupsms	uses)  to  se-
	      lected folder in phone.

       backup file [-yes]
	      Backup  your  phone to file. It's	possible to backup (depends on
	      phone and	backup format):

	      o	phonebook from SIM and phone memory

	      o	calendar notes

	      o	SMSC settings

	      o	operator logo

	      o	startup	(static) logo or startup text

	      o	WAP bookmarks

	      o	WAP settings

	      o	caller logos and groups

	      o	user ringtones

	      There are	various	backup formats supported and the backup	format
	      is guessed based on file extension:

	      o	.lmb  -	 Nokia	backup,	 supports  contacts,  caller logos and
		startup	logo.

	      o	.vcs - vCalendar, supports calendar and	todo.

	      o	.vcf - vCard, supports contacts.

	      o	.ldif -	LDAP import, supports contacts.

	      o	.ics - iCalendar, supports calendar and	todo.

	      o	Any other extension is Gammu backup file and it	 supports  all
		data mentioned above, see gammu-backup for more	details.

	      By  default this command is interactive and asks which items tou
	      want to backup.

	      Use -yes for answering yes to all	questions.

       backupsms file [-yes|-all]
	      Stores all SMSes from phone to file into gammu-smsbackup.

	      By default this command is interactive and  asks	which  folders
	      you  want	to backup and whether you want to remove messages from
	      phone afterwards.

	      Use -yes for answering yes to all	questions (backup all messages
	      and  delete them from phone), or -all to just backup all folders
	      while keeping messages in	phone.

       restore file [-yes]

	      WARNING:
		 Please	note that restoring deletes  all  current  content  in
		 phone.	 If  you  want only to add entries to phone, use gammu
		 addnew.

	      Restore settings written in file created using gammu backup com-
	      mand.

	      In some phones restoring calendar	notes will not show error, but
	      won't be done, when phone	doesn't	have set clock inside.

       restoresms file [-yes]

	      WARNING:
		 Please	note that this overwrites existing messages  in	 phone
		 (if it	supports it).

	      Restores	SMSes  from file (format like gammu backupsms uses) to
	      selected folder in phone.

       savefile	TYPE [type options]
	      Converts between various file formats supported by  Gammu,  fol-
	      lowing types are supported:

	      BOOKMARK target.url file location
		     Converts  backup  format  supported by Gammu to vBookmark
		     file.

	      CALENDAR target.vcs file location
		     Allows one	to  convert  between  various  backup  formats
		     which  gammu  supports for	calendar events. The file type
		     is	guessed	(for input file	guess is  based	 on  extension
		     and file content, for output solely on extension).

	      TODO target.vcs file location
		     Allows  one  to  convert  between	various	backup formats
		     which gammu supports for todo events. The	file  type  is
		     guessed  (for  input file guess is	based on extension and
		     file content, for output solely on	extension).

	      VCARD10|VCARD21 target.vcf file SM|ME location
		     Allows one	to  convert  between  various  backup  formats
		     which  gammu supports for phonebook events. The file type
		     is	guessed	(for input file	guess is  based	 on  extension
		     and file content, for output solely on extension).

	      SEE ALSO:
		 gammu convertbackup

       convertbackup source.file output.file
	      New in version 1.28.94.

	      Converts backup between formats supported	by Gammu. Unlike gammu
	      savefile,	this does not give you any options what	to convert, it
	      simply takes converts all	what can be saved into output file.

	      SEE ALSO:
		 gammu savefile

   Nokia specific commands
       nokiaaddfile TYPE [type options]
	      Uploads file to phone to specific	location for the type:

	      APPLICATION|GAME file [-readonly]	[-overwrite] [-overwriteall]
		     Install  the *.jar/*.jad file pair	of a midlet in the ap-
		     plication or game menu of the phone. You need to  specify
		     filename  without	the jar/jad suffix, both will be added
		     automatically.

		     -overwrite
			    Delete the application's .jad and .jar  files  be-
			    fore  installing,  but doesn't delete the applica-
			    tion data.

		     -overwriteall
			    Delete the application (same  as  -overwrite)  and
			    all	it's data.

		     You  can use jadmaker to generate a .jad file from	a .jar
		     file.

	      GALLERY|GALLERY2|CAMERA|TONES|TONES2|RECORDS|VIDEO|PLAYLIST|MEM-
	      ORYCARD  file  [-name  name]  [-protected] [-readonly] [-system]
	      [-hidden]	[-newtime]

       nokiaaddplaylists
	      Goes through phone memory	and generated playlist for  all	 music
	      files found.

	      To manually manage playlists:

		 gammu addfile a:\\predefplaylist filename.m3u

	      Will add playlist	filename.m3u

		 gammu getfilesystem

	      Will  get	 list  of  all	files  (including  names of files with
	      playlists)

		 gammu deletefiles a:\\predefplaylist\\filename.m3u

	      Will delete playlist filename.m3u

	      Format of	m3u playlist is	easy (standard mp3 playlist):

	      First line is  #EXTM3U,  next  lines  contain   names  of	 files
	      (b:\file1.mp3,  b:\folder1\file2.mp3,  etc.).  File needs	t have
	      \r\n terminated lines. So	just run  unix2dos  on	the  resulting
	      file before uploading it your your phone.

       nokiacomposer file
	      Show,  how  to  enter RTTL ringtone in composer existing in many
	      Nokia phones (and	how should it look like).

       nokiadebug filename [[v11-22] [,v33-44]...]

       nokiadisplayoutput

       nokiadisplaytest	number

       nokiagetadc

       nokiagetoperatorname
	      6110.c phones have place	for  name  for	one  GSM  network  (of
	      course,  with  flashing  it's  possible to change	all names, but
	      Gammu is not flasher ;-)). You can get this name using this  op-
	      tion.

       nokiagetpbkfeatures memorytype

       nokiagett9
	      This  option  should  display  T9	 dictionary  content from DCT4
	      phones.

       nokiagetvoicerecord location
	      Get voice	record from location and save to  WAV  file.  File  is
	      coded  using  GSM	 6.10  codec (available	for example in win32).
	      Name of file is like name	of voice record	in phone.

	      Created WAV files	require	GSM 6.10 codec to be played. In	Win XP
	      it's  included  by  Microsoft.  If you deleted it	by accident in
	      this operating system, make such steps:

	      1.  Control Panel

	      2.  Add hardware

	      3.  click	Next

	      4.  select "Yes. I have already connected	the hardware

	      5.  select "Add a	new hardware device

	      6.  select "Install the hardware that I manually select  from  a
		  list

	      7.  select "Sound, video and game	controllers

	      8.  select "Audio	codecs

	      9.  select "windows\system32" directory and file "mmdriver.inf

	      10. if  You  will	 be  asked for file msgsm32.acm, it should un-
		  packed from Windows CD

	      11. now You can be asked if  want	 to  install  unsigned	driver
		  (YES),  about	 select	 codec	configuration (select what you
		  want)	and rebotting PC (make it)

       nokiamakecamerashoot

       nokianetmonitor test
	      Takes output or set netmonitor for Nokia DCT3 phones.

	      SEE ALSO:
		 For more info about this option, please visit	Marcin's  page
		 and read netmonitor manual there.

	      NOTE:
		 test  243  enables  all  tests	 (after	 using	command	 gammu
		 nokianetmonitor 243 in	some phones like 6210 or 9210 have  to
		 reboot	them to	see netmonitor menu)

       nokianetmonitor36
	      Reset counters from netmonitor test 36 in	Nokia DCT3 phones.

	      SEE ALSO:
		 For  more  info about this option, please visit Marcin's page
		 and read netmonitor manual there.

       nokiasecuritycode
	      Get/reset	to "12345" security code

       nokiaselftests
	      Perform tests for	Nokia DCT3 phones.

	      NOTE:
		 EEPROM	test can show an error when your phone has  an	EEPROM
		 in flash (like	82xx/7110/62xx/33xx). The clock	test will show
		 an error when the phone doesn't have an internal battery  for
		 the clock (like 3xxx).

       nokiasetlights keypad|display|torch on|off

       nokiasetoperatorname [networkcode name]

       nokiasetphonemenus
	      Enable all (?) possible menus for	DCT3 Nokia phones:

	      1. ALS (Alternative Line Service)	option menu

	      2. vibra menu for	3210

	      3. 3315 features in 3310 5.45 and	higher

	      4. two  additional  games	 (React	 and  Logic) for 3210 5.31 and
		 higher

	      5. WellMate menu for 6150

	      6. NetMonitor

	      and for DCT4:

	      1. ALS (Alternative Line Service)	option menu

	      2. Bluetooth, WAP	bookmarks and settings menu, ... (6310i)

	      3. GPRS Always Online

	      4. and others...

       nokiasetvibralevel level
	      Set vibra	power to "level" (given	in percent)

       nokiatuneradio

       nokiavibratest

   Siemens specific commands
       siemensnetmonact	netmon_type
	      Enables network monitor in Siemens phone.	Currently known	values
	      for type are 1 for full and 2 for	simple mode.

       siemensnetmonitor test

       siemenssatnetmon

   Network commands
       getgprspoint start [stop]

       listnetworks [country]
	      Show names/codes of GSM networks known for Gammu

       networkinfo
	      Show information about network status from the phone.

       setautonetworklogin

   WAP settings	and bookmarks commands
       deletewapbookmark start [stop]
	      Delete WAP bookmarks from	phone.

	      Locations	are numerated from 1.

       getchatsettings start [stop]

       getsyncmlsettings start [stop]

       getwapbookmark start [stop]
	      Get WAP bookmarks	from phone.

	      Locations	are numerated from 1.

       getwapsettings start [stop]
	      Get WAP settings from phone.

	      Locations	are numerated from 1.

   MMS and MMS settings	commands
       getallmms [-save]

       geteachmms [-save]

       getmmsfolders

       getmmssettings start [stop]

       readmmsfile file	[-save]

   FM radio commands
       getfmstation start [stop]
	      Show info	about FM stations in phone

   Phone information commands
       battery
	      Displays information about battery and power source.

       getdisplaystatus

       getsecuritystatus
	      Show,  if	 phone wait for	security code (like PIN, PUK, etc.) or
	      not

       identify
	      Show the most important phone data.

       monitor [times]
	      Retrieves	phone status and writes	it  continuously  to  standard
	      output. Press Ctrl+C to interrupt	this command.

	      If  no  parameter	 is given, the program runs until interrupted,
	      otherwise	only given number of iterations	is performed.

	      This command outputs almost all information Gammu	supports:

	      o	Number of  contacts,  calendar	and  todo  entries,  messages,
		calls, etc.

	      o	Signal strength.

	      o	Battery	state.

	      o	Currently used network.

	      o	Notifications of incoming messages and calls.

   Phone settings commands
       getcalendarsettings
	      Displays	calendar  settings like	first day of week or automatic
	      deleting of old entries.

       getprofile start	[stop]

       resetphonesettings PHONE|DEV|UIF|ALL|FACTORY

	      WARNING:
		 This will delete user data, be	careful.

	      Reset phone settings.

	      PHONE  Clear phone settings.

	      DEV    Clear device settings.

	      ALL    Clear user	settings.

		     o removes or set logos to default

		     o set default phonebook and other menu settings

		     o clear T9	words,

		     o clear call register info

		     o set default profiles settings

		     o clear user ringtones

	      UIF    Clear user	settings and disables hidden menus.

		     o changes like after ALL

		     o disables	netmon and PPS (all "hidden" menus)

	      FACTORY
		     Reset to factory defaults.

		     o changes like after UIF

		     o clear date/time

   Dumps decoding commands
       NOTE:
	  These	commands are available only if Gammu was compiled with	debug-
	  ging options.

       decodebinarydump	file [phonemodel]
	      Decodes a	dump made by Gammu with	LogFormat set to binary.

       decodesniff MBUS2|IRDA file [phonemodel]
	      Allows  one  to decode sniffs. See Discovering protocol for more
	      details.

   Other commands
       entersecuritycode PIN|PUK|PIN2|PUK2|PHONE|NETWORK code|-	[newpin|-]
	      Allow one	to enter security code from PC.	When code is -,	it  is
	      read from	stdin.

	      In  case entering	PUK, some phones require you to	set new	PIN as
	      well.

       presskeysequence	mMnNpPuUdD+-123456789*0#gGrR<>[]hHcCjJfFoOmMdD@
	      Press specified key sequence on phone keyboard

	      mM     Menu

	      nN     Names key

	      pP     Power

	      uU     Up

	      dD     Down

	      +-     +-

	      gG     Green

	      rR     Red

	      123456789*0#
		     numeric keyboard

       reset SOFT|HARD
	      Make phone reset:

	      SOFT   without asking for	PIN

	      HARD   with asking for PIN

	      NOTE:
		 Some phones will ask for PIN even with	SOFT option.

	      WARNING:
		 Some phones will reset	user data on HARD reset.

       setpower	ON|OFF
	      New in version 1.33.90.

	      Turns off	or on the phone.

	      NOTE:
		 This is usually required for built in modules in notebooks.

       screenshot filename
	      Captures phone screenshot	and saves it as	filename.  The	exten-
	      sion  is	automatically  appended	to filename based on what data
	      phone provides.

   Batch mode commands
       batch [file]
	      Starts Gammu in a	batch mode. In this mode you can issue several
	      commands	each on	one line. Lines	starting with #	are treated as
	      a	comments.

	      By default, commands are read from standard input, but  you  can
	      optionally specify a file	from where they	would be read (special
	      case - means standard input).

   Configuration commands
       searchphone [-debug]
	      Attempts to search for a connected phone.

	      WARNING:
		 Please	note that this can take	a very long time, but in  case
		 you have no clue how to configure phone connection, this is a
		 convenient way	to find	working	setup for Gammu.

       install [-minimal]
	      Installs applet  for  currently  configured  connection  to  the
	      phone.

	      You  can	configure  search path for installation	files by Data-
	      Path.

	      The -minimal parameter forces installation of applet only	 with-
	      out possible support libraries, this can be useful for updates.

   Gammu information commands
       checkversion [STABLE]
	      Checks whether there is newer Gammu version available online (if
	      Gammu has	been compiled with CURL). If you pass  additional  pa-
	      rameter STABLE, only stable versions will	be checked.

       features
	      Print information	about compiled in features.

       help [topic]
	      Print help. By default general help is printed, but you can also
	      specify a	help category to get more detailed help	on some	topic.

       version
	      Print version information	and license.

RETURN VALUES
       gammu returns 0 on success. In case of failure non  zero	 code  is  re-
       turned.

       1      Out of memory or other critical error.

       2      Invalid command line parameters.

       3      Failed to	open file specified on command line.

       4      Program was interrupted.

       98     Gammu library version mismatch.

       99     Functionality has	been moved. For	example	to gammu-smsd.

       Errors  codes greater than 100 map to the GSM_Error values increased by
       100:

       101    No error.

       102    Error opening device. Unknown, busy or no	permissions.

       103    Error opening device, it is locked.

       104    Error opening device, it doesn't exist.

       105    Error opening device, it is already opened by other application.

       106    Error opening device, you	don't have permissions.

       107    Error opening device. No required	driver in operating system.

       108    Error opening device. Some hardware not  connected/wrongly  con-
	      figured.

       109    Error setting device DTR or RTS.

       110    Error setting device speed. Maybe	speed not supported.

       111    Error writing to the device.

       112    Error during reading from	the device.

       113    Can't set	parity on the device.

       114    No response in specified timeout.	Probably phone not connected.

       115    Frame	 not	  requested	 right	   now.	    See	    <-
	      https://wammu.eu/support/bugs/> for information  how  to	report
	      it.

       116    Unknown	    response	   from	      phone.	   See	    <-
	      https://wammu.eu/support/bugs/> for information  how  to	report
	      it.

       117    Unknown frame. See <https://wammu.eu/support/bugs/> for informa-
	      tion how to report it.

       118    Unknown connection type string. Check config file.

       119    Unknown model type string. Check config file.

       120    Some functions not available for your system (disabled in	config
	      or not implemented).

       121    Function not supported by	phone.

       122    Empty entry.

       123    Security error. Maybe no PIN?

       124    Invalid location.	Maybe too high?

       125    Functionality  not  implemented. You are welcome to help authors
	      with it.

       126    Memory full.

       127    Unknown error.

       128    Can not open specified file.

       129    More memory required...

       130    Operation	not allowed by phone.

       131    No SMSC number given. Provide it manually	or use the one config-
	      ured in phone.

       132    You're  inside  phone  menu  (maybe  editing?). Leave it and try
	      again.

       133    Phone is not connected.

       134    Function is currently being implemented. If you  want  to	 help,
	      please contact authors.

       135    Phone is disabled	and connected to charger.

       136    File format not supported	by Gammu.

       137    Nobody is	perfect, some bug appeared in protocol implementation.
	      Please contact authors.

       138    Transfer was canceled by phone,  maybe  you  pressed  cancel  on
	      phone.

       139    Phone module need	to send	another	answer frame.

       140    Current connection type doesn't support called function.

       141    CRC error.

       142    Invalid date or time specified.

       143    Phone memory error, maybe	it is read only.

       144    Invalid data given to phone.

       145    File with	specified name already exists.

       146    File with	specified name doesn't exist.

       147    You have to give folder name and not file	name.

       148    You have to give file name and not folder	name.

       149    Can not access SIM card.

       150    Wrong GNAPPLET version in	phone. Use version from	currently used
	      Gammu.

       151    Only part	of folder has been listed.

       152    Folder must be empty.

       153    Data were	converted.

       154    Gammu is not configured.

       155    Wrong folder used.

       156    Internal phone error.

       157    Error writing file to disk.

       158    No such section exists.

       159    Using default values.

       160    Corrupted	data returned by phone.

       161    Bad feature string in configuration.

       162    Desired functionality has	been disabled on compile time.

       163    Bluetooth	configuration requires channel option.

       164    Service is not running.

       165    Service configuration is missing.

       166    Command rejected because device was busy.	Wait and restart.

       167    Could not	connect	to the server.

       168    Could not	resolve	the host name.

       169    Failed to	get SMSC number	from phone.

       170    Operation	aborted.

       171    Installation data	not found, please  consult  debug  log	and/or
	      documentation for	more details.

       172    Entry is read only.

EXAMPLES
   Configuration
       To  check  it  out,  you	need to	have configuration file	for gammu, see
       gammurc for more	details	about it.

   Sending messages
       NOTE:
	  All messages below are sent to number	123456,	replace	it with	proper
	  destination.

       Send text message up to standard	160 chars:

	  echo "All your base are belong to us"	| gammu	sendsms	TEXT 123456

       or

	  gammu	sendsms	TEXT 123456 -text "All your base are belong to us"

       Send long text message:

	  echo "All your base are belong to us"	| gammu	sendsms	TEXT 123456 -len 400

       or

	  gammu	sendsms	TEXT 123456 -len 400 -text "All	your base are belong to	us"

       or

	  gammu	sendsms	EMS 123456 -text "All your base	are belong to us"

       Send some funky message with predefined sound and animation from	2 bit-
       maps:

	  gammu	sendsms	EMS 123456 -text "Greetings" -defsound 1 -text "from Gammu -tone10 axelf.txt -animation	2 file1.bmp file2.bmp

       Send protected message with ringtone:

	  gammu	sendsms	EMS 123456 -protected 2	-variablebitmaplong ala.bmp -toneSElong	axelf.txt -toneSE ring.txt

   Retrieving USSD replies
       For example for retrieving prepaid card status  or  retrieving  various
       network info:

	  gammu	getussd	'#555#'

   Uploading files to Nokia
       Add  Alien  to  applications  in	 your  phone  (you  need to have files
       Alien.JAD and Alien.JAR in current directory):

	  gammu	nokiaaddfile APPLICATION Alien

       Add file.mid to ringtones folder:

	  gammu	nokiaaddfile TONES file.mid

   Setting operator logo
       Set logo	for network 230	03 (Vodafone CZ):

	  gammu	setbitmap OPERATOR ala.bmp "230	03"

   Converting file formats
       The formats conversion can done using gammu savefile or gammu  convert-
       backup commands.

       Convert single entry (at	position 260) from gammu-backup	to vCalendar:

	  gammu	savefile CALENDAR output.vcs myCalendar.backup 260

       Convert first phonebook entry from gammu-backup to vCard:

	  gammu	savefile VCARD21 output.vcf phone.backup ME 1

       Convert all contacts from backup	to vCard:

	  gammu	convertbackup phone.backup output.vcf

   Reporting bugs
       There  are definitely many bugs,	reporting to author is welcome.	Please
       include some useful information when sending  bug  reports  (especially
       debug  logs,  operating	system,	it's version and phone information are
       needed).

       To generate debug log, enable it	in gammurc:

	  [gammu]
	  YOUR CONNECTION SETTINGS
	  logfile = /tmp/gammu.log
	  logformat = textall

       Alternatively you can specify logging on	command	line:

	  gammu	-d textall -f /tmp/gammu.log ...

       With this settings, Gammu generates /tmp/gammu.log on  each  connection
       to phone	and stores dump	of communication there.	You can	also find some
       hints for improving support for your phone in this log.

       See <https://wammu.eu/support/bugs/> for	more information on  reporting
       bugs.

       Please report bugs to Gammu bug tracker.

AUTHOR
       Michal AihaA <michal@cihar.com>

COPYRIGHT
       2009-2015, Michal AihaA <michal@cihar.com>

1.41.0				 Sep 27, 2019			      GAMMU(1)

NAME | SYNOPSIS | DESCRIPTION | RETURN VALUES | EXAMPLES | AUTHOR | COPYRIGHT

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=gammu&sektion=1&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help