Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
FUSIONINVENTORY-NETDISUserRContributed Perl DocFUSIONINVENTORY-NETDISCOVERY(1)

NAME
       fusioninventory-netdiscovery - Standalone network discovery

SYNOPSIS
       fusioninventory-netdiscovery [options] --first <address>	--last
       <address>

	 Options:
	   --first <ADDRESS>	  IP range first address
	   --last <ADDRESS>	  IP range last	address
	   --port <PORT[,PORT2]>  SNMP port (161)
	   --protocol <PROT[,P2]> SNMP protocol/domain (udp/ipv4)
	   --community <STRING>	  SNMP community string	(public)
	   --credentials <STRING> SNMP credentials (version:1,community:public)
	   --timeout <TIME	  SNMP timeout,	in seconds (1)
	   --entity <ENTITY>	  GLPI entity
	   --threads <COUNT>	  number of discovery threads (1)
	   --control		  output control messages
	   -i --inventory	  chain	with netinventory task for discovered devices
	   -s --save <FOLDER>	  base folder where to save discovery and inventory xmls
				   - netdiscovery xmls will go in <FOLDER>/netdiscovery
				   - netinventory xmls will go in <FOLDER>/netinventory
	   --debug		  debug	output
	   -h --help		  print	this message and exit
	   --version		  print	the task version and exit

DESCRIPTION
       fusioninventory-netdiscovery can	be used	to run a network discovery
       task without a GLPI server.

OPTIONS
       --first ADDRESS
	   Set the first IP address of the network range to scan.

       --last ADDRESS
	   Set the last	IP address of the network range	to scan.

       --port PORT[,PORT2]
	   List	of ports to try, defaults to: 161

	   Set it to 161,16100 to first	try on default port and	then on	16100.

       --protocol PROTOCOL[,PROTOCOL2]
	   List	of protocols to	try, defaults to: udp/ipv4

	   Possible values are:	udp/ipv4,udp/ipv6,tcp/ipv4,tcp/ipv6

       --community STRING
	   Use given string as SNMP community (assume SNMPv1).

       --credentials STRING
	   Use given string as SNMP credentials	specification. This
	   specification is a comma-separated list of key:value	authentication
	   parameters, such as:

	   o   version:2c,community:public

	   o   version:3,username:admin,authprotocol:sha,authpassword:s3cr3t

	   o   etc.

       --timeout TIME
	   Set SNMP timeout, in	seconds.

       --entity	ENTITY
	   Set GLPI entity.

       --threads COUNT
	   Use given number of inventory threads.

       --control
	   Output server-agent control messages, in addition to	inventory
	   result itself.

       --debug
	   Turn	the debug mode on. Multiple usage allowed, for additional
	   verbosity.

EXAMPLES
       Run a discovery against a network range,	using SNMP version 1:

	   $> fusioninventory-netdiscovery --first 192.168.0.1 --last 192.168.0.254 \
	   --community public

       Run a discovery against a network range,	using multiple SNMP
       credentials:

	   $> fusioninventory-netdiscovery --first 192.168.0.1 --last 192.168.0.254 \
	   --credentials version:2c,community:public \
	   --credentials version:3,username:admin,authprotocol:sha,authpassword:s3cr3t

perl v5.32.1			  2019-12-12   FUSIONINVENTORY-NETDISCOVERY(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=fusioninventory-netdiscovery&sektion=1&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help