Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
FSCK(8)			  BSD System Manager's Manual		       FSCK(8)

NAME
     fsck -- file system consistency check and interactive repair

SYNOPSIS
     fsck [-dfnPpqvy] [-l maxparallel] [-T fstype:fsoptions] [-t fstype]
	  [-x mountpoint] [special | node ...]

DESCRIPTION
     The fsck command invokes file system-specific programs to check the spe-
     cial devices listed in the	fstab(5) file or in the	command	line for con-
     sistency.

     It	is normally used in the	script /etc/rc during automatic	reboot.	 If no
     file systems are specified, and "preen" mode is enabled ( -p option) fsck
     reads the table /etc/fstab	to determine which file	systems	to check, in
     what order.  Only partitions in fstab that	are mounted ``rw,'' ``rq'' or
     ``ro'' and	that have non-zero pass	number are checked.  File systems with
     pass number 1 (normally just the root file	system)	are checked one	at a
     time.  When pass 1	completes, all remaining file systems are checked,
     running one process per disk drive.  By default, file systems which are
     already mounted read-write	are not	checked.  The disk drive containing
     each file system is inferred from the longest prefix of the device	name
     that ends in a digit; the remaining characters are	assumed	to be the par-
     tition designator.

     The options are as	follows:

     -d	     Debugging mode.  Just print the commands without executing	them.

     -f	     Force checking of file systems, even when they are	marked clean
	     (for file systems that support this), or when they	are mounted
	     read-write.

     -l	maxparallel
	     Limit the number of parallel checks to the	number specified in
	     the following argument.  By default, the limit is the number of
	     disks, running one	process	per disk.  If a	smaller	limit is
	     given, the	disks are checked round-robin, one file	system at a
	     time.

     -n	     Causes fsck to assume no as the answer to all operator questions,
	     except "CONTINUE?".

     -P	     Display a progress	meter for each file system check.  This	option
	     also disables parallel checking.  Note that progress meters are
	     not supported by all file system types.

     -p	     Enter preen mode.	In preen mode, fsck will check all file	sys-
	     tems listed in /etc/fstab according to their pass number, and
	     will make minor repairs without human intervention.

     -q	     Quiet mode, do not	output any messages for	clean filesystems.

     -T	fstype:fsoptions
	     List of comma separated file system specific options for the
	     specified file system type, in the	same format as mount(8).

     -t	fstype
	     Invoke fsck only for the comma separated list of file system
	     types.  If	the list starts	with "no" then invoke fsck for the
	     file system types that are	not specified in the list.

     -v	     Print the commands	before executing them.

     -x	mountpoint
	     Exclude the filesystem which has a	mountpoint the same as in
	     /etc/fstab.  Used only in "preen" mode.

     -y	     Causes fsck to assume yes as the answer to	all operator ques-
	     tions.

FILES
     /etc/fstab	 file system table

EXIT STATUS
     fsck exits	with 0 on success.  Any	major problems will cause fsck to exit
     with the following	non-zero exit(3) codes,	so as to alert any invoking
     program or	script that human intervention is required.

     1	   Usage problem.

     2	   Unresolved errors while checking the	filesystem.  Re-running	fsck
	   on the filesystem(s)	is required.

     4	   The root filesystem was changed in the process of checking, and up-
	   dating the mount was	unsuccessful.  A reboot	(without sync) is re-
	   quired.

     8	   The filesystem check	has failed, and	a subsequent check is required
	   that	will require human intervention.

     12	   fsck	exited because of the result of	a signal (usually SIGINT or
	   SIGQUIT from	the terminal).

SEE ALSO
     fstab(5), fsck_ext2fs(8), fsck_ffs(8), fsck_lfs(8), fsck_msdos(8),
     mount(8)

BSD			       February	17, 2010			   BSD

NAME | SYNOPSIS | DESCRIPTION | FILES | EXIT STATUS | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=fsck&sektion=8&manpath=NetBSD+6.0>

home | help