Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
FREEIPMI_INTERPRET_SENSOR(5)	 Configuration	  FREEIPMI_INTERPRET_SENSOR(5)

NAME
       freeipmi_interpret_sensor.conf -	specify	sensor interpretation rules

DESCRIPTION
       The  /usr/local/etc/freeipmi/freeipmi_interpret_sensor.conf defines how
       IPMI sensors should be interpreted. IPMI	based sensors specify a	number
       of  states/thresholds when they are read. Based on those	states/thresh-
       olds, libraries and tools such as libfreeipmi(3),  libipmimonitoring(3)
       and  ipmi-sensors(8)  can report	if a sensor reading is "good" or "bad"
       via a report of a NOMINAL, WARNING, or CRITICAL state.

       Each of the states listed below are (hopefully) descriptive  enough  to
       describe	 the  state  conditions	 that may be set/unset for each	sensor
       type. For more detailed information on each of  the  individual	states
       listed  below, please see the IPMI Specification	"Sensor	and Event Code
       Tables".	 Ipmi-sensors(8) can be	used to	determine the sensor types and
       the states/thresholds that exist	on a system by outputting very verbose
       output and seeing what types of Assertion  or  Deassertion  events  are
       possible.

       The possible values for all states/thresholds below are:

       Nominal - Signal	Nominal	reading	if state/threshold tripped

       Warning - Signal	Warning	reading	if state/treshold tripped

       Critical	- Signal Critical reading if state/threshold tripped

       Not  all	 IPMI sensor types and event types are currently supported. If
       you would like more to be supported, please e-mail the FreeIPMI mailing
       list.

       The  default  values  selected  for  individual states/thresholds being
       tripped are based on best guesses and motherboards being	analyzed.   If
       you  think  they	 should	be changed, please e-mail the FreeIPMI mailing
       list to discuss what the	defaults should	be.

       Most default interpretations can	be determined  quite  easily  and  can
       meet  the  needs	 of  most  users.  For	example, a reading of "Perfor-
       mance_Met" is normally better than "Performance_Lags".	However,  some
       sensors can be ambiguous	and depend completely on the manufacturer. For
       example,	"State_Asserted" vs. "State_Deasserted"	are completely at  the
       interpretation of the vendor. Users are advised to adjust the interpre-
       tations below as	needed for their machines.

       Every group of state conditions	below  includes	 a  configuration  for
       "No_Event".  This  is the condition under which no sensor states/events
       have occurred or	are triggered. Under most  conditions,	a  mapping  to
       "Nominal"  is  preferred.  However, under some circumstances, it	may be
       useful to report	something else.	For example, if	a sensor on a particu-
       lar  motherboard	is required to report a	state/event, a no sensor state
       condition could indicate	a broken a sensor. This	is highly dependent on
       the motherboard.

FORMAT
       The  configuration  options  that can be	specified in the configuration
       file are	listed below. Each configuration option	must be	 listed	 on  a
       separate	 line.	Arguments for an option	are separated by any amount of
       whitespace. Multiple arguments are also separated by whitespace.	  Com-
       ments  can be marked by using the pound sign ("#") character, and lines
       can be continued	on the next using backslash ("\").

OPTIONS
       IPMI_Threshold_Sensor
	      The following states correspond to threshold sensors. This  nor-
	      mally  applies to	sensors	that measure non-discrete values, such
	      as temperatures, voltages, RPM, etc.

	      IPMI_Threshold_Sensor_No_Event
		     Defaults to Nominal.

	      IPMI_Threshold_Sensor_At_Or_Below_Lower_Non_Critical_Threshold
		     Defaults to Nominal.

	      IPMI_Threshold_Sensor_At_Or_Below_Lower_Critical_Threshold
		     Defaults to Critical.

	      IPMI_Threshold_Sensor_At_Or_Below_Lower_Non_Recoverable_Thresh-
	      old
		     Defaults to Critical.

	      IPMI_Threshold_Sensor_At_Or_Above_Upper_Non_Critical_Threshold
		     Defaults to Nominal.

	      IPMI_Threshold_Sensor_At_Or_Above_Upper_Critical_Threshold
		     Defaults to Critical.

	      IPMI_Threshold_Sensor_At_Or_Above_Upper_Non_Recoverable_Thresh-
	      old
		     Defaults to Critical.

       IPMI_Temperature_State
	      The following states correspond to Temperature sensors that  re-
	      port an assertion	or deassertion.

	      IPMI_Temperature_State_No_Event
		     Defaults to Nominal.

	      IPMI_Temperature_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Temperature_State_Asserted
		     Defaults to Warning.

       IPMI_Temperature_Limit
	      The  following states correspond to Temperature sensors that re-
	      port on limits.

	      IPMI_Temperature_Limit_No_Event
		     Defaults to Nominal.

	      IPMI_Temperature_Limit_Not_Exceeded
		     Defaults to Nominal.

	      IPMI_Temperature_Limit_Exceeded
		     Defaults to Critical.

       IPMI_Temperature_Transition_Severity
	      The following states correspond to Temperature sensors that  re-
	      port on device severity.

	      IPMI_Temperature_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_Temperature_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Temperature_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Temperature_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Temperature_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Temperature_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Temperature_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Temperature_Transition_Severity_Transition_To_Non_Recover-
	      able
		     Defaults to Critical.

	      IPMI_Temperature_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Temperature_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Voltage_State
	      The  following  states correspond	to Voltage sensors that	report
	      an assertion or deassertion.

	      IPMI_Voltage_State_No_Event
		     Defaults to Nominal.

	      IPMI_Voltage_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Voltage_State_Asserted
		     Defaults to Warning.

       IPMI_Voltage_Limit
	      The following states correspond to Voltage sensors  that	report
	      on limits.

	      IPMI_Voltage_Limit_No_Event
		     Defaults to Nominal.

	      IPMI_Voltage_Limit_Not_Exceeded
		     Defaults to Nominal.

	      IPMI_Voltage_Limit_Exceeded
		     Defaults to Critical.

       IPMI_Voltage_Performance
	      The  following  states correspond	to Voltage sensors that	report
	      on performance.

	      IPMI_Voltage_Performance_No_Event
		     Defaults to Nominal.

	      IPMI_Voltage_Performance_Met
		     Defaults to Nominal.

	      IPMI_Voltage_Performance_Lags
		     Defaults to Critical.

       IPMI_Voltage_Transition_Severity
	      The following states correspond to Voltage sensors  that	report
	      on device	severity.

	      IPMI_Voltage_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_Voltage_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Voltage_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Voltage_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Voltage_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Voltage_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Voltage_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Voltage_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Voltage_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Current_Transition_Severity
	      The following states correspond to Current sensors  that	report
	      on device	severity.

	      IPMI_Current_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_Current_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Current_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Current_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Current_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Current_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Current_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Current_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Current_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Fan_State
	      The following states correspond to Fan sensors  that  report  an
	      assertion	or deassertion.

	      IPMI_Fan_State_No_Event
		     Defaults to Nominal.

	      IPMI_Fan_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Fan_State_Asserted
		     Defaults to Warning.

       IPMI_Fan_Transition_Severity
	      The  following  states  correspond to Fan	sensors	that report on
	      device severity.

	      IPMI_Fan_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_Fan_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_OK
		     Defaults to Warning.

	      IPMI_Fan_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Fan_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Fan_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Non_Re-
	      coverable
		     Defaults to Critical.

	      IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Fan_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Fan_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Fan_Device_Present
	      The following states correspond to Fan sensors  that  report  on
	      device installation.

	      IPMI_Fan_Device_Present_Device_No_Event
		     Defaults to Nominal.

	      IPMI_Fan_Device_Present_Device_Removed_Device_Absent
		     Defaults to Critical.

	      IPMI_Fan_Device_Present_Device_Inserted_Device_Present
		     Defaults to Nominal.

       IPMI_Power_Supply_Transition_Severity
	      The following states correspond to Power Supply sensors that re-
	      port on device severity.

	      IPMI_Power_Supply_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recover-
	      able
		     Defaults to Critical.

	      IPMI_Power_Supply_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Power_Supply_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Fan_Transition_Availability
	      The following states correspond to Fan sensors  that  report  on
	      device availability.

	      IPMI_Fan_Transition_Availability_No_Event
		     Defaults to Nominal.

	      IPMI_Fan_Transition_Availability_To_Running
		     Defaults to Nominal.

	      IPMI_Fan_Transition_Availability_To_In_Test
		     Defaults to Warning.

	      IPMI_Fan_Transition_Availability_To_Power_Off
		     Defaults to Warning.

	      IPMI_Fan_Transition_Availability_To_On_Line
		     Defaults to Warning.

	      IPMI_Fan_Transition_Availability_To_Off_Line
		     Defaults to Warning.

	      IPMI_Fan_Transition_Availability_To_Off_Duty
		     Defaults to Warning.

	      IPMI_Fan_Transition_Availability_To_Degraded
		     Defaults to Critical.

	      IPMI_Fan_Transition_Availability_To_Power_Save
		     Defaults to Warning.

	      IPMI_Fan_Transition_Availability_Install_Error
		     Defaults to Critical.

       IPMI_Fan_Redundancy
	      The  following  states  correspond to Fan	sensors	that report on
	      redundancy.

	      IPMI_Fan_Redundancy_No_Event
		     Defaults to Nominal.

	      IPMI_Fan_Redundancy_Fully_Redundant
		     Defaults to Nominal.

	      IPMI_Fan_Redundancy_Redundancy_Lost
		     Defaults to Critical.

	      IPMI_Fan_Redundancy_Redundancy_Degraded
		     Defaults to Warning.

	      IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Re-
	      dundant
		     Defaults to Critical.

	      IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_In-
	      sufficient_Redundancy
		     Defaults to Critical.

	      IPMI_Fan_Redundancy_Non_Redundant_Insufficient_Resources
		     Defaults to Critical.

	      IPMI_Fan_Redundancy_Redundancy_Degraded_From_Fully_Redundant
		     Defaults to Warning.

	      IPMI_Fan_Redundancy_Redundancy_Degraded_From_Non_Redundant
		     Defaults to Warning.

       IPMI_Physical_Security
	      The following states correspond to Physical Security sensors  w/
	      Physical Security	specific output	states.

	      IPMI_Physical_Security_No_Event
		     Defaults to Nominal.

	      IPMI_Physical_Security_General_Chassis_Intrusion
		     Defaults to Critical.

	      IPMI_Physical_Security_Drive_Bay_Intrusion
		     Defaults to Critical.

	      IPMI_Physical_Security_IO_Card_Intrusion
		     Defaults to Critical.

	      IPMI_Physical_Security_Processor_Area_Intrusion
		     Defaults to Critical.

	      IPMI_Physical_Security_LAN_Leash_Lost
		     Defaults to Critical.

	      IPMI_Physical_Security_Unauthorized_Dock_Undock
		     Defaults to Critical.

	      IPMI_Physical_Security_FAN_Area_Intrusion
		     Defaults to Critical.

       IPMI_Platform_Security_Violation_Attempt
	      The  following  states  correspond to Platform Violation Attempt
	      sensors w/ Platform Security Violation Attempt  specific	output
	      states.

	      IPMI_Platform_Security_Violation_Attempt_No_Event
		     Defaults to Nominal.

	      IPMI_Platform_Security_Violation_Attempt_Secure_Mode_Viola-
	      tion_Attempt
		     Defaults to Critical.

	      IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Vio-
	      lation_User_Password
		     Defaults to Critical.

	      IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Vio-
	      lation_Attempt_Setup_Password
		     Defaults to Critical.

	      IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Vio-
	      lation_Network_Boot_Password
		     Defaults to Critical.

	      IPMI_Platform_Security_Violation_Attempt_Other_Pre_Boot_Pass-
	      word_Violation
		     Defaults to Critical.

	      IPMI_Platform_Security_Violation_Attempt_Out_Of_Band_Ac-
	      cess_Password_Violation
		     Defaults to Critical.

       IPMI_Processor
	      The  following states correspond to Processor sensors w/ Proces-
	      sor specific output states.

	      IPMI_Processor_No_Event
		     Defaults to Nominal.

	      IPMI_Processor_IERR
		     Defaults to Critical.

	      IPMI_Processor_Thermal_Trip
		     Defaults to Critical.

	      IPMI_Processor_FRB1_BIST_Failure
		     Defaults to Critical.

	      IPMI_Processor_FRB2_Hang_In_POST_Failure
		     Defaults to Critical.

	      IPMI_Processor_FRB3_Processor_Startup_Initialization_Failure
		     Defaults to Critical.

	      IPMI_Processor_Configuration_Error
		     Defaults to Critical.

	      IPMI_Processor_SMBIOS_Uncorrectable_CPU_Complex_Error
		     Defaults to Critical.

	      IPMI_Processor_Processor_Presence_Detected
		     Defaults to Nominal.

	      IPMI_Processor_Processor_Disabled
		     Defaults to Critical.

	      IPMI_Processor_Terminator_Presence_Detected
		     Defaults to Critical.

	      IPMI_Processor_Processor_Automatically_Throttled
		     Defaults to Warning.

	      IPMI_Processor_Machine_Check_Exception
		     Defaults to Critical.

	      IPMI_Processor_Correctable_Machine_Check_Error
		     Defaults to Warning.

       IPMI_Processor_State
	      The following states correspond to Processor sensors that	report
	      an assertion or deassertion.

	      IPMI_Processor_State_No_Event
		     Defaults to Nominal.

	      IPMI_Processor_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Processor_State_Asserted
		     Defaults to Critical.

       IPMI_Power_Supply
	      The following states correspond to Power Supply sensors w/ Power
	      Supply specific output states.

	      IPMI_Power_Supply_No_Event
		     Defaults to Nominal.

	      IPMI_Power_Supply_Presence_Detected
		     Defaults to Nominal.

	      IPMI_Power_Supply_Power_Supply_Failure_Detected
		     Defaults to Critical.

	      IPMI_Power_Supply_Predictive_Failure
		     Defaults to Critical.

	      IPMI_Power_Supply_Power_Supply_Input_Lost_AC_DC
		     Defaults to Critical.

	      IPMI_Power_Supply_Power_Supply_Input_Lost_Or_Out_Of_Range
		     Defaults to Critical.

	      IPMI_Power_Supply_Power_Supply_Input_Out_Of_Range_But_Present
		     Defaults to Critical.

	      IPMI_Power_Supply_Configuration_Error
		     Defaults to Critical.

	      IPMI_Power_Supply_Power_Supply_Inactive
		     Defaults to Warning.

       IPMI_Power_Supply_State
	      The following states correspond to Power_Supply sensors that re-
	      port an assertion	or deassertion.

	      IPMI_Power_Supply_State_No_Event
		     Defaults to Nominal.

	      IPMI_Power_Supply_State_Deasserted
		     Defaults to Critical.

	      IPMI_Power_Supply_State_Asserted
		     Defaults to Nominal.

       IPMI_Power_Supply_Redundancy
	      The following states correspond to Power Supply sensors that re-
	      port on redundancy.

	      IPMI_Power_Supply_Redundancy_No_Event
		     Defaults to Nominal.

	      IPMI_Power_Supply_Redundancy_Fully_Redundant
		     Defaults to Nominal.

	      IPMI_Power_Supply_Redundancy_Redundancy_Lost
		     Defaults to Critical.

	      IPMI_Power_Supply_Redundancy_Redundancy_Degraded
		     Defaults to Warning.

	      IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Redundant
		     Defaults to Critical.

	      IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Insufficient_Redundancy
		     Defaults to Critical.

	      IPMI_Power_Supply_Redundancy_Non_Redundant_Insufficient_Re-
	      sources
		     Defaults to Critical.

	      IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Fully_Re-
	      dundant
		     Defaults to Warning.

	      IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Non_Redun-
	      dant
		     Defaults to Warning.

       IPMI_Power_Unit
	      The  following  states correspond	to Power Unit sensors w/ Power
	      Unit specific output states.

	      IPMI_Power_Unit_No_Event
		     Defaults to Nominal.

	      IPMI_Power_Unit_Power_Off_Power_Down
		     Defaults to Nominal.

	      IPMI_Power_Unit_Power_Cycle
		     Defaults to Nominal.

	      IPMI_Power_Unit_240VA_Power_Down
		     Defaults to Warning.

	      IPMI_Power_Unit_Interlock_Power_Down
		     Defaults to Warning.

	      IPMI_Power_Unit_AC_Lost
		     Defaults to Critical.

	      IPMI_Power_Unit_Soft_Power_Control_Failure
		     Defaults to Critical.

	      IPMI_Power_Unit_Power_Unit_Failure_Detected
		     Defaults to Critical.

	      IPMI_Power_Unit_Predictive_Failure
		     Defaults to Critical.

       IPMI_Power_Unit_Device_Present
	      The following states correspond to Power Unit sensors  that  re-
	      port on device installation.

	      IPMI_Power_Unit_Device_Present_No_Event
		     Defaults to Nominal.

	      IPMI_Power_Unit_Device_Present_Device_Removed_Device_Absent
		     Defaults to Critical.

	      IPMI_Power_Unit_Device_Present_Device_Inserted_Device_Present
		     Defaults to Nominal.

       IPMI_Power_Unit_Redundancy
	      The  following  states correspond	to Power Unit sensors that re-
	      port on redundancy.

	      IPMI_Power_Unit_Redundancy_No_Event
		     Defaults to Nominal.

	      IPMI_Power_Unit_Redundancy_Fully_Redundant
		     Defaults to Nominal.

	      IPMI_Power_Unit_Redundancy_Redundancy_Lost
		     Defaults to Critical.

	      IPMI_Power_Unit_Redundancy_Redundancy_Degraded
		     Defaults to Warning.

	      IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Redundant
		     Defaults to Critical.

	      IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Insufficient_Redundancy
		     Defaults to Critical.

	      IPMI_Power_Unit_Redundancy_Non_Redundant_Insufficient_Resources
		     Defaults to Critical.

	      IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Fully_Redun-
	      dant
		     Defaults to Warning.

	      IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Non_Redun-
	      dant
		     Defaults to Warning.

       IPMI_Cooling_Device_Redundancy
	      The following states correspond to Cooling Device	 sensors  that
	      report on	redundancy.

	      IPMI_Cooling_Device_Redundancy_No_Event
		     Defaults to Nominal.

	      IPMI_Cooling_Device_Redundancy_Fully_Redundant
		     Defaults to Nominal.

	      IPMI_Cooling_Device_Redundancy_Redundancy_Lost
		     Defaults to Critical.

	      IPMI_Cooling_Device_Redundancy_Redundancy_Degraded
		     Defaults to Warning.

	      IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Redundant
		     Defaults to Critical.

	      IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Insufficient_Redundancy
		     Defaults to Critical.

	      IPMI_Cooling_Device_Redundancy_Non_Redundant_Insufficient_Re-
	      sources
		     Defaults to Critical.

	      IPMI_Cooling_Device_Redundancy_Redundancy_De-
	      graded_From_Fully_Redundant
		     Defaults to Warning.

	      IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Non_Re-
	      dundant
		     Defaults to Warning.

       IPMI_Memory
	      The following states correspond to Memory	sensors	w/ Memory spe-
	      cific output states.

	      IPMI_Memory_No_Event
		     Defaults to Nominal.

	      IPMI_Memory_Correctable_Memory_Error
		     Defaults to Warning.

	      IPMI_Memory_Uncorrectable_Memory_Error
		     Defaults to Critical.

	      IPMI_Memory_Parity
		     Defaults to Critical.

	      IPMI_Memory_Memory_Scrub_Failed
		     Defaults to Critical.

	      IPMI_Memory_Memory_Device_Disabled
		     Defaults to Critical.

	      IPMI_Memory_Correctable_Memory_Error_Logging_Limit_Reached
		     Defaults to Warning.

	      IPMI_Memory_Presence_Detected
		     Defaults to Nominal.

	      IPMI_Memory_Configuration_Error
		     Defaults to Critical.

	      IPMI_Memory_Spare
		     Defaults to Nominal.

	      IPMI_Memory_Memory_Automatically_Throttled
		     Defaults to Warning.

	      IPMI_Memory_Critical_Overtemperature
		     Defaults to Critical.

       IPMI_Memory_State
	      The following states correspond to Memory	sensors	that report an
	      assertion	or deassertion.

	      IPMI_Memory_State_No_Event
		     Defaults to Nominal.

	      IPMI_Memory_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Memory_State_Asserted
		     Defaults to Critical.

       IPMI_Memory_Transition_Severity
	      The following states correspond to Memory	sensors	that report on
	      device severity.

	      IPMI_Memory_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_Memory_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Memory_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Memory_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Memory_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Memory_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Memory_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Memory_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Memory_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Memory_Redundancy
	      The following states correspond to Cooling Device	 sensors  that
	      report on	redundancy.

	      IPMI_Memory_Redundancy_No_Event
		     Defaults to Nominal.

	      IPMI_Memory_Redundancy_Fully_Redundant
		     Defaults to Nominal.

	      IPMI_Memory_Redundancy_Redundancy_Lost
		     Defaults to Critical.

	      IPMI_Memory_Redundancy_Redundancy_Degraded
		     Defaults to Warning.

	      IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Redundant
		     Defaults to Critical.

	      IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Insufficient_Redundancy
		     Defaults to Critical.

	      IPMI_Memory_Redundancy_Non_Redundant_Insufficient_Resources
		     Defaults to Critical.

	      IPMI_Memory_Redundancy_Redundancy_Degraded_From_Fully_Redundant
		     Defaults to Warning.

	      IPMI_Memory_Redundancy_Redundancy_Degraded_From_Non_Redundant
		     Defaults to Warning.

       IPMI_Drive_Slot
	      The  following  states correspond	to Drive Slot sensors w/ Drive
	      Slot specific output states.

	      IPMI_Drive_Slot_No_Event
		     Defaults to Nominal.

	      IPMI_Drive_Slot_Drive_Presence
		     Defaults to Nominal.

	      IPMI_Drive_Slot_Drive_Fault
		     Defaults to Critical.

	      IPMI_Drive_Slot_Predictive_Failure
		     Defaults to Critical.

	      IPMI_Drive_Slot_Hot_Spare
		     Defaults to Nominal.

	      IPMI_Drive_Slot_Consistency_Check_Parity_Check_In_Progress
		     Defaults to Nominal.

	      IPMI_Drive_Slot_In_Critical_Array
		     Defaults to Critical.

	      IPMI_Drive_Slot_In_Failed_Array
		     Defaults to Critical.

	      IPMI_Drive_Slot_Rebuild_Remap_In_Progress
		     Defaults to Nominal.

	      IPMI_Drive_Slot_Rebuild_Remap_Aborted
		     Defaults to Critical.

       IPMI_Drive_Slot_State
	      The following states correspond to Drive Slot sensors  that  re-
	      port an assertion	or deassertion.

	      IPMI_Drive_Slot_State_No_Event
		     Defaults to Nominal.

	      IPMI_Drive_Slot_State_Deasserted
		     Defaults to Warning.

	      IPMI_Drive_Slot_State_Asserted
		     Defaults to Nominal.

       IPMI_Drive_Slot_Predictive_Failure
	      The  following  states correspond	to Drive_Slot sensors that re-
	      port a predictive	failure	assertion or deassertion.

	      IPMI_Drive_Slot_Predictive_Failure_No_Event
		     Defaults to Nominal.

	      IPMI_Drive_Slot_Predictive_Failure_Deasserted
		     Defaults to Nominal.

	      IPMI_Drive_Slot_Predictive_Failure_Asserted
		     Defaults to Critical.

       IPMI_Drive_Slot_Device_Present
	      The following states correspond to Drive Slot sensors  that  re-
	      port on device installation.

	      IPMI_Drive_Slot_Device_Present_No_Event
		     Defaults to Nominal.

	      IPMI_Drive_Slot_Device_Present_Device_Removed_Device_Absent
		     Defaults to Critical.

	      IPMI_Drive_Slot_Device_Present_Device_Inserted_Device_Present
		     Defaults to Nominal.

       IPMI_POST_Memory_Resize_State
	      The  following  states  correspond to POST Memory	Resize sensors
	      that report an assertion or deassertion.

	      IPMI_POST_Memory_Resize_State_No_Event
		     Defaults to Nominal.

	      IPMI_POST_Memory_Resize_State_Deasserted
		     Defaults to Nominal.

	      IPMI_POST_Memory_Resize_State_Asserted
		     Defaults to Warning.

       IPMI_System_Firmware_Progress
	      The following states correspond to System	Firmware Progress sen-
	      sors w/ System Firmware Progress specific	output states.

	      IPMI_System_Firmware_Progress_No_Event
		     Defaults to Nominal.

	      IPMI_System_Firmware_Progress_System_Firmware_Error
		     Defaults to Critical.

	      IPMI_System_Firmware_Progress_System_Firmware_Hang
		     Defaults to Critical.

	      IPMI_System_Firmware_Progress_System_Firmware_Progress
		     Defaults to Nominal.

       IPMI_System_Firmware_Progress_Transition_Severity
	      The following states correspond to System	Firmware Progress sen-
	      sors that	report on device severity.

	      IPMI_System_Firmware_Progress_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_OK
		     Defaults to Nominal.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_Non_Critical_From_OK
		     Defaults to Warning.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_Critical_From_Less_Severe
		     Defaults to Critical.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_Non_Recoverable_From_Less_Severe
		     Defaults to Critical.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_Non_Critical_From_More_Severe
		     Defaults to Warning.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_Critical_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_System_Firmware_Progress_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_System_Firmware_Progress_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Event_Logging_Disabled
	      The  following  states correspond	to Event Logging Disabled sen-
	      sors w/

	      IPMI_Event_Logging_Disabled_No_Event
		     Defaults to Nominal.

	      IPMI_Event_Logging_Disabled_Correctable_Memory_Error_Log-
	      ging_Disabled
		     Defaults to Critical.

	      IPMI_Event_Logging_Disabled_Event_Type_Logging_Disabled
		     Defaults to Critical.

	      IPMI_Event_Logging_Disabled_Log_Area_Reset_Cleared
		     Defaults to Nominal.

	      IPMI_Event_Logging_Disabled_All_Event_Logging_Disabled
		     Defaults to Critical.

	      IPMI_Event_Logging_Disabled_SEL_Full
		     Defaults to Critical.

	      IPMI_Event_Logging_Disabled_SEL_Almost_Full
		     Defaults to Warning.

	      IPMI_Event_Logging_Disabled_Correctable_Machine_Check_Error_Log-
	      ging_Disabled
		     Defaults to Critical.

       IPMI_System_Event
	      The following states correspond to System	Event sensors w/  Sys-
	      tem Event	specific output	states.

	      IPMI_System_Event_No_Event
		     Defaults to Nominal.

	      IPMI_System_Event_System_Reconfigured
		     Defaults to Warning.

	      IPMI_System_Event_OEM_System_Boot_Event
		     Defaults to Nominal.

	      IPMI_System_Event_Undetermined_System_Hardware_Failure
		     Defaults to Critical.

	      IPMI_System_Event_Entry_Added_To_Auxiliary_Log
		     Defaults to Nominal.

	      IPMI_System_Event_PEF_Action
		     Defaults to Nominal.

	      IPMI_System_Event_Timestamp_Clock_Sync
		     Defaults to Warning.

       IPMI_System_Event_Transition_State
	      The following states correspond to System	Event sensors that re-
	      port a transition	state.

	      IPMI_System_Event_Transition_State_No_Event
		     Defaults to Nominal.

	      IPMI_System_Event_Transition_State_Active
		     Defaults to Nominal.

	      IPMI_System_Event_Transition_State_Idle
		     Defaults to Nominal.

	      IPMI_System_Event_Transition_State_Busy
		     Defaults to Nominal.

       IPMI_System_Event_State
	      The following states correspond to System	Event sensors that re-
	      port an assertion	or deassertion.

	      IPMI_System_Event_State_No_Event
		     Defaults to Nominal.

	      IPMI_System_Event_State_Deasserted
		     Defaults to Nominal.

	      IPMI_System_Event_State_Asserted
		     Defaults to Warning.

       IPMI_Critical_Interrupt
	      The following states correspond to Critical Interrupt sensors w/
	      Critical Interrupt specific output states.

	      IPMI_Critical_Interrupt_No_Event
		     Defaults to Nominal.

	      IPMI_Critical_Interrupt_Front_Panel_NMI_Diagnostic_Interrupt
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_Bus_Timeout
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_IO_Channel_Check_NMI
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_Software_NMI
		     Defaults to Warning.

	      IPMI_Critical_Interrupt_PCI_PERR
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_PCI_SERR
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_EISA_Fail_Safe_Timeout
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_Bus_Correctable_Error
		     Defaults to Warning.

	      IPMI_Critical_Interrupt_Bus_Uncorrectable_Error
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_Fatal_NMI
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_Bus_Fatal_Error
		     Defaults  to  Critical.   IPMI_Critical_Interrupt_Bus_De-
		     graded Defaults to	Warning.

       IPMI_Button_Switch
	      The following states correspond to Button/Switch sensors w/ But-
	      ton/Switch specific output states.

	      IPMI_Button_Switch_No_Event
		     Defaults to Nominal.

	      IPMI_Button_Switch_Power_Button_Pressed
		     Defaults to Nominal.

	      IPMI_Button_Switch_Sleep_Button_Pressed
		     Defaults to Nominal.

	      IPMI_Button_Switch_Reset_Button_Pressed
		     Defaults to Nominal.

	      IPMI_Button_Switch_FRU_Latch_Open
		     Defaults to Warning.

	      IPMI_Button_Switch_FRU_Service_Request_Button
		     Defaults to Warning.

       IPMI_Button_Switch_State
	      The following states correspond to  Button/Switch	 sensors  that
	      report an	assertion or deassertion.

	      IPMI_Button_Switch_State_No_Event
		     Defaults to Nominal.

	      IPMI_Button_Switch_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Button_Switch_State_Asserted
		     Defaults to Nominal.

       IPMI_Button_Switch_Transition_Severity
	      The  following  states  correspond to Button/Switch sensors that
	      report on	device severity.

	      IPMI_Button_Switch_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recov-
	      erable_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recov-
	      erable
		     Defaults to Critical.

	      IPMI_Button_Switch_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Button_Switch_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Module_Board_State
	      The following states correspond to Module/Board sensors that re-
	      port an assertion	or deassertion.

	      IPMI_Module_Board_State_No_Event
		     Defaults to Nominal.

	      IPMI_Module_Board_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Module_Board_State_Asserted
		     Defaults to Critical.

       IPMI_Module_Board_Device_Present
	      The following states correspond to Module/Board sensors that re-
	      port on device installation.

	      IPMI_Module_Board_Device_Present_No_Event
		     Defaults to Nominal.

	      IPMI_Module_Board_Device_Present_Device_Removed_Device_Absent
		     Defaults to Critical.

	      IPMI_Module_Board_Device_Present_Device_Inserted_Device_Present
		     Defaults to Nominal.

       IPMI_Chassis_Transition_Severity
	      The following states correspond to Chassis sensors  that	report
	      on device	severity.

	      IPMI_Chassis_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_Chassis_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Chassis_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Chassis_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Chassis_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Chassis_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Chassis_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Chassis_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Chassis_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Chip_Set_Transition_Severity
	      The following states correspond to Chip Set sensors that	report
	      on device	severity.

	      IPMI_Chip_Set_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Chip_Set_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Chip_Set_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Cable_Interconnect
	      The following states correspond to Cable/Interconnect sensors w/
	      Cable/Interconnect specific output states.

	      IPMI_Cable_Interconnect_No_Event
		     Defaults to Nominal.

	      IPMI_Cable_Interconnect_Is_Connected
		     Defaults to Nominal.

	      IPMI_Cable_Interconnect_Configuration_Error
		     Defaults to Critical.

       IPMI_Cable_Interconnect_Transition_Severity
	      The  following  states  correspond to Cable/Interconnect sensors
	      that report on device severity.

	      IPMI_Cable_Interconnect_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_Cable_Interconnect_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Cable_Interconnect_Transition_Severity_Transi-
	      tion_To_Non_Critical_From_OK
		     Defaults to Warning.

	      IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Cable_Interconnect_Transition_Severity_Transi-
	      tion_To_Non_Recoverable_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Cable_Interconnect_Transition_Severity_Transi-
	      tion_To_Non_Critical_From_More_Severe
		     Defaults to Warning.

	      IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Cable_Interconnect_Transition_Severity_Transi-
	      tion_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Cable_Interconnect_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Cable_Interconnect_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Boot_Error
	      The following states correspond to Boot Error  sensors  w/  Boot
	      Error specific output states.

	      IPMI_Boot_Error_No_Event
		     Defaults to Nominal.

	      IPMI_Boot_Error_No_Bootable_Media
		     Defaults to Critical.

	      IPMI_Boot_Error_Non_Bootable_Diskette_Left_In_Drive
		     Defaults to Critical.

	      IPMI_Boot_Error_PXE_Server_Not_Found
		     Defaults to Critical.

	      IPMI_Boot_Error_Invalid_Boot_Sector
		     Defaults to Critical.

	      IPMI_Boot_Error_Timeout_Waiting_For_User_Selec-
	      tion_Of_Boot_Source
		     Defaults to Warning.

       IPMI_Boot_Error_State
	      The following states correspond to Boot Error sensors  that  re-
	      port an assertion	or deassertion.

	      IPMI_Boot_Error_State_No_Event
		     Defaults to Nominal.

	      IPMI_Boot_Error_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Boot_Error_State_Asserted
		     Defaults to Critical.

       IPMI_Boot_Error_Transition_Severity
	      The  following  states correspond	to Boot	Error sensors that re-
	      port on device severity.

	      IPMI_Boot_Error_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recover-
	      able
		     Defaults to Critical.

	      IPMI_Boot_Error_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Boot_Error_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_OS_Boot
	      The following states correspond to OS Boot sensors  w/  OS  Boot
	      specific output events.
	      IPMI_OS_Boot_No_Event	    Defaults	    to	      Nominal.
	      IPMI_OS_Boot_A_Boot_Completed	Defaults      to      Nominal.
	      IPMI_OS_Boot_C_Boot_Completed	 Defaults      to     Nominal.
	      IPMI_OS_Boot_PXE_Boot_Completed	  Defaults     to     Nominal.
	      IPMI_OS_Boot_Diagnostic_Boot_Completed   Defaults	  to  Nominal.
	      IPMI_OS_Boot_CD_ROM_Boot_Completed    Defaults	to    Nominal.
	      IPMI_OS_Boot_ROM_Boot_Completed	  Defaults     to     Nominal.
	      IPMI_OS_Boot_Boot_Completed_Boot_Device_Not_Specified   Defaults
	      to      Warning.	     IPMI_OS_Boot_Base_OS_Hypervisor_Installa-
	      tion_Started Defaults to Nominal.	 IPMI_OS_Boot_Base_OS_Hypervi-
	      sor_Installation_Completed       Defaults	      to      Nominal.
	      IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Aborted Defaults to
	      Warning.	   IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Failed
	      Defaults to Critical.

       IPMI_OS_Critical_Stop_State
	      The following states correspond to OS Critical Stop sensors that
	      report an	assertion or deassertion.

	      IPMI_OS_Critical_Stop_State_No_Event
		     Defaults to Nominal.

	      IPMI_OS_Critical_Stop_State_Deasserted
		     Defaults to Nominal.

	      IPMI_OS_Critical_Stop_State_Asserted
		     Defaults to Critical.

       IPMI_Slot_Connector
	      The  following  states  correspond  to Slot Connector sensors w/
	      Slot Connector specific output states.

	      IPMI_Slot_Connector_No_Event
		     Defaults to Nominal.

	      IPMI_Slot_Connector_Fault_Status_Asserted
		     Defaults to Critical.

	      IPMI_Slot_Connector_Identify_Status_Asserted
		     Defaults to Warning.

	      IPMI_Slot_Connector_Slot_Connector_Device_Installed_Attached
		     Defaults to Nominal.

	      IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Installation
		     Defaults to Nominal.

	      IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Removal
		     Defaults to Nominal.

	      IPMI_Slot_Connector_Slot_Power_Is_Off
		     Defaults to Nominal.

	      IPMI_Slot_Connector_Slot_Connector_Device_Removal_Request
		     Defaults to Warning.

	      IPMI_Slot_Connector_Interlock_Asserted
		     Defaults to Warning.

	      IPMI_Slot_Connector_Slot_Is_Disabled
		     Defaults to Warning.

	      IPMI_Slot_Connector_Slot_Holds_Spare_Device
		     Defaults to Nominal.

       IPMI_Slot_Connector_Transition_Severity
	      The following states correspond to Slot Connector	 sensors  that
	      report on	device severity.

	      IPMI_Slot_Connector_Transition_Severity_No_Event
		     Defaults to Nominal.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recov-
	      erable_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recov-
	      erable
		     Defaults to Critical.

	      IPMI_Slot_Connector_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Slot_Connector_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_System_ACPI_Power_State

	      IPMI_System_ACPI_Power_State_No_Event
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S0_G0
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S1
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S2
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S3
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S4
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S5_G2
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S4_S5_Soft_Off
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_G3_Mechanical_Off
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_Sleeping_in_an_S1_S2_or_S3_States
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_G1_Sleeping
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S5_Entered_By_Override
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_Legacy_ON_State
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_Legacy_OFF_State
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_Unspecified
		     Defaults to Critical.

	      IPMI_System_ACPI_Power_State_Unknown
		     Defaults to Critical.

       IPMI_Watchdog2
	      The  following states correspond to Watchdog 2 sensors w/	Watch-
	      dog 2 specific output states.

	      IPMI_Watchdog2_No_Event
		     Defaults to Nominal.

	      IPMI_Watchdog2_Timer_Expired
		     Defaults to Warning.

	      IPMI_Watchdog2_Hard_Reset
		     Defaults to Critical.

	      IPMI_Watchdog2_Power_Down
		     Defaults to Critical.

	      IPMI_Watchdog2_Power_Cycle
		     Defaults to Critical.

	      IPMI_Watchdog2_Reserved1
		     Defaults to Nominal.

	      IPMI_Watchdog2_Reserved2
		     Defaults to Nominal.

	      IPMI_Watchdog2_Reserved3
		     Defaults to Nominal.

	      IPMI_Watchdog2_Reserved4
		     Defaults to Nominal.

	      IPMI_Watchdog2_Timer_Interrupt
		     Defaults to Warning.

       IPMI_Platform_Alert_State
	      The following states correspond to Platform Alert	 sensors  that
	      report an	assertion or deassertion.

	      IPMI_Platform_Alert_State_No_Event
		     Defaults to Nominal.

	      IPMI_Platform_Alert_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Platform_Alert_State_Asserted
		     Defaults to Critical.

       IPMI_Entity_Presence
	      The  following  states  correspond to Entity Presence sensors w/
	      Entity Presence specific output states.

	      IPMI_Entity_Presence_No_Event
		     Defaults to Nominal.

	      IPMI_Entity_Presence_Entity_Present
		     Defaults to Nominal.

	      IPMI_Entity_Presence_Entity_Absent
		     Defaults to Critical.

	      IPMI_Entity_Presence_Entity_Disabled
		     Defaults to Critical.

       IPMI_Entity_Presence_Device_Present
	      The following states correspond to Entity	Presence sensors  that
	      report on	device installation.

	      IPMI_Entity_Presence_Device_Present_No_Event
		     Defaults to Nominal.

	      IPMI_Entity_Presence_Device_Present_Device_Removed_Device_Absent
		     Defaults to Nominal.

	      IPMI_Entity_Presence_Device_Present_Device_Inserted_De-
	      vice_Present
		     Defaults to Nominal.

       IPMI_Management_Subsystem_Health
	      The following states correspond to Management  Subsystem	Health
	      sensors w/ Management Subsystem Health specific output states.

	      IPMI_Management_Subsystem_Health_No_Event
		     Defaults to Nominal.

	      IPMI_Management_Subsystem_Health_Sensor_Access_Degraded_Or_Un-
	      available
		     Defaults to Critical.

	      IPMI_Management_Subsystem_Health_Controller_Access_De-
	      graded_Or_Unavailable
		     Defaults to Critical.

	      IPMI_Management_Subsystem_Health_Management_Controller_Off_Line
		     Defaults to Critical.

	      IPMI_Management_Subsystem_Health_Management_Controller_Unavail-
	      able
		     Defaults to Critical.

	      IPMI_Management_Subsystem_Health_Sensor_Failure
		     Defaults to Critical.

	      IPMI_Management_Subsystem_Health_FRU_Failure
		     Defaults to Critical.

       IPMI_Battery
	      The following states correspond to Battery  sensors  w/  Battery
	      specific output states.

	      IPMI_Battery_No_Event
		     Defaults to Nominal.

	      IPMI_Battery_Battery_Low
		     Defaults to Warning.

	      IPMI_Battery_Battery_Failed
		     Defaults to Critical.

	      IPMI_Battery_Battery_Presence_Detected
		     Defaults to Nominal.

       IPMI_Session_Audit
	      The following states correspond to Session Audit sensors w/ Ses-
	      sion_Audit specific output states.

	      IPMI_Version_Change_No_Event
		     Defaults to Nominal.

	      IPMI_Version_Change_Hardware_Change_Detected_With_Associated_En-
	      tity
		     Defaults to Warning.

	      IPMI_Version_Change_Firmware_Or_Software_Change_De-
	      tected_With_Associated_Entity
		     Defaults to Warning.

	      IPMI_Version_Change_Hardware_Incompatability_Detected_With_Asso-
	      ciated_Entity
		     Defaults to Critical.

	      IPMI_Version_Change_Firmware_Or_Software_Incompatability_De-
	      tected_With_Associated_Entity
		     Defaults to Critical.

	      IPMI_Version_Change_Entity_Is_Of_An_Invalid_Or_Unsupported_Hard-
	      ware_Version
		     Defaults to Critical.

	      IPMI_Version_Change_Entity_Contains_An_Invalid_Or_Unsup-
	      ported_Firmware_Or_Software_Version
		     Defaults to Critical.

	      IPMI_Version_Change_Hardware_Change_Detected_With_Associated_En-
	      tity_Was_Successful
		     Defaults to Nominal.

	      IPMI_Version_Change_Software_Or_FW_Change_Detected_With_Associ-
	      ated_Entity_Was_Successful
		     Defaults to Nominal.

       IPMI_FRU_State
	      The following states correspond to  FRU  State  sensors  w/  FRU
	      State specific output states.

	      IPMI_FRU_State_No_Event
		     Defaults to Nominal.

	      IPMI_FRU_State_FRU_Not_Installed
		     Defaults to Critical.

	      IPMI_FRU_State_FRU_Inactive
		     Defaults to Critical.

	      IPMI_FRU_State_FRU_Activation_Requested
		     Defaults to Warning.

	      IPMI_FRU_State_FRU_Activation_In_Progress
		     Defaults to Warning.

	      IPMI_FRU_State_FRU_Active
		     Defaults to Nominal.

	      IPMI_FRU_State_FRU_Deactivation_Requested
		     Defaults to Warning.

	      IPMI_FRU_State_FRU_Deactivation_In_Progress
		     Defaults to Warning.

	      IPMI_FRU_State_FRU_Communication_Lost
		     Defaults to Critical.

       IPMI_OEM
	      The following configuration options can be used to configure OEM
	      specific	interpretations.  Users	 should	 be  aware  that  both
	      IPMI_OEM_Bitmask	and  IPMI_OEM_Value  can  be configured	for an
	      identical	Manufacturer-ID, Product-ID,  Event-Reading-Type-Code,
	      and  Sensor-Type	combination.  All  interpretations rules for a
	      specific combination are iterated	through	and the	worst  result-
	      ing sensor state is returned (i.e. Warning < Nominal, Critical <
	      Warning).	If no match is found, no sensor	state is returned  for
	      the OEM sensor reading.

	      For  each	 of the	configuration options below, _Manufacturer-ID_
	      is the numeric IANA manufacturer	ID  for	 the  manufacturer  in
	      question.	  The  _Product-ID_  is	one or more numeric IDs	repre-
	      senting the manufacturer's product.   The	 _Product-ID_  can  be
	      listed  as  a  single numeric number (e.g. 1234),	a range	of IDs
	      separated	by a dash (e.g.	12-20),	or a list of specific  product
	      IDs separted by a	plus (e.g. 12+19+22). Both the Manufacturer-ID
	      and Product-ID can be found using	bmc-info(8).  Multiple	_Manu-
	      facturer-ID_  and	 _Product-ID_  pairs can be input separated by
	      commas.

	      The Event-Reading-Type-Code and  Sensor-Type  need  not  be  OEM
	      types. They may be non-OEM types and used	to provide interpreta-
	      tion rules for sensors that may be behaving outside the standard
	      of the IPMI specification.

	      IPMI_OEM_Bitmask	_Manufacturer-ID_:_Product-ID_,... Event-Read-
	      ing-Type-Code Sensor-Type	Sensor-Event-Bitmask State
		     IPMI_OEM_Bitmask can be used to configure a state	inter-
		     pretation	for  a	specific  Manufacturer-ID, Product-ID,
		     Event-Reading-Type-Code, and Sensor-Type combination  and
		     a specific	bitmask	of the Sensor-Event. The state will be
		     accepted as the sensor  interpretation  if	 the  inputted
		     bitmask  ANDed with the actual sensor event bitmask read-
		     ing is true. As a special case, the  state	 will  be  ac-
		     cepted  if	 the  inputted	bitmask	 and the actual	sensor
		     event bitmask are both 0. In other	words,	if  no	events
		     happened,	an  OEM	 interpretation	 can be	configured for
		     this case by inputing a bitmask of	0x0000.

	      IPMI_OEM_Value  _Manufacturer-ID_:_Product-ID_,...   Event-Read-
	      ing-Type-Code Sensor-Type	Sensor-Event-Bitmask-Value State
		     IPMI_OEM_Value can	be used	to configure a state interpre-
		     tation  for  a  specific	Manufacturer-ID,   Product-ID,
		     Event-Reading-Type-Code,  and Sensor-Type combination and
		     a specific	value for the Sensor-Event-Bitmask. The	 state
		     will  be accepted as the sensor interpretation if the in-
		     putted bitmask value is equal to the actual sensor	 event
		     bitmask reading.

FILES
       /usr/local/etc/freeipmi/freeipmi_interpret_sensor.conf

REPORTING BUGS
       Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.

COPYRIGHT
       Copyright (C) 2007-2015 Lawrence	Livermore National Security, LLC.

       This library is free software; you can redistribute it and/or modify it
       under the terms of the GNU General Public License as published  by  the
       Free  Software Foundation; either version 3 of the License, or (at your
       option) any later version.

SEE ALSO
       libfreeipmi(3), libipmimonitoring(3), ipmi-sensors(8)

       http://www.gnu.org/software/freeipmi/

FreeIPMI 1.6.5			  2020-05-21	  FREEIPMI_INTERPRET_SENSOR(5)

NAME | DESCRIPTION | FORMAT | OPTIONS | FILES | REPORTING BUGS | COPYRIGHT | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=freeipmi_interpret_sensor.conf&sektion=5&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help