Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
FREEIPMI_INTERPRET_SEL(5)	 Configuration	     FREEIPMI_INTERPRET_SEL(5)

NAME
       freeipmi_interpret_sel.conf  - specify system event log (SEL) interpre-
       tation rules

DESCRIPTION
       The  /usr/local/etc/freeipmi/freeipmi_interpret_sel.conf	 defines   how
       IPMI system event log entries should be interpreted. IPMI system	events
       specify a number	of states/thresholds when  they	 are  read.  Based  on
       those  states/thresholds,  libraries  and tools such as libipmimonitor-
       ing(3) and ipmi-sel(8) can report if an event is	"good" or "bad"	via  a
       report  of a NOMINAL, WARNING, or CRITICAL state. A different state can
       be reported for an event	depending on if	it is asserted or deasserted.

       Each of the states listed below are (hopefully) descriptive  enough  to
       describe	 the state conditions that may be set/unset for	each sensor or
       event type. For more detailed information on  each  of  the  individual
       states  listed  below,  please  see  the	IPMI Specification "Sensor and
       Event Code Tables".  Ipmi-sensors(8) can	be used	to determine the  sen-
       sor  types  and	the  states/thresholds	that exist on a	system by out-
       putting very verbose output and seeing what types of Assertion  or  De-
       assertion events	are possible.

       Each of the events below	may may	take 1 or 2 of the following states as
       input.

       Nominal - Signal	Nominal	reading	if event tripped

       Warning - Signal	Warning	reading	if event tripped

       Critical	- Signal Critical reading if event tripped

       If only one state is listed, that state will be	interpreted  when  the
       event  is  asserted  or deasserted. If two states are listed, the first
       state will be interpreted when an event is asserted, and	the later will
       be interpreted when an event is deasserted.

       Not  all	 IPMI sensor types and event types are currently supported. If
       you would like more to be supported, please e-mail the FreeIPMI mailing
       list.

       The  default  values  selected  for individual events being tripped are
       based on	best guesses and motherboards being analyzed.	If  you	 think
       they should be changed, please e-mail the FreeIPMI mailing list to dis-
       cuss what the defaults should be.

       Most default interpretations can	be determined  quite  easily  and  can
       meet  the  needs	 of  most  users.  For	example, a reading of "Perfor-
       mance_Met" is normally better than "Performance_Lags".	However,  some
       sensors can be ambiguous	and depend completely on the manufacturer. For
       example,	"State_Asserted" vs. "State_Deasserted"	are completely at  the
       interpretation of the vendor. Users are advised to adjust the interpre-
       tations below as	needed for their machines.

FORMAT
       The configuration options that can be specified	in  the	 configuration
       file  are  listed  below. Each configuration option must	be listed on a
       separate	line. Arguments	for an option are separated by any  amount  of
       whitespace.  Multiple arguments are also	separated by whitespace.  Com-
       ments can be marked by using the	pound sign ("#") character, and	 lines
       can be continued	on the next using backslash ("\").

OPTIONS
       IPMI_Threshold_Sensor
	      The following states correspond to threshold sensor events. This
	      normally applies to events that dealing with  non-discrete  val-
	      ues, such	as temperatures, voltages, RPM,	etc.

	      IPMI_Threshold_Sensor_Lower_Non_Critical_Going_Low
		     Defaults to Warning/Nominal.

	      IPMI_Threshold_Sensor_Lower_Non_Critical_Going_High
		     Defaults to Nominal/Nominal.

	      IPMI_Threshold_Sensor_Lower_Critical_Going_Low
		     Defaults to Critical/Warning.

	      IPMI_Threshold_Sensor_Lower_Critical_Going_High
		     Defaults to Warning/Warning.

	      IPMI_Threshold_Sensor_Lower_Non_Recoverable_Going_Low
		     Defaults to Critical/Critical.

	      IPMI_Threshold_Sensor_Lower_Non_Recoverable_Going_High
		     Defaults to Critical/Critical.

	      IPMI_Threshold_Sensor_Upper_Non_Critical_Going_Low
		     Defaults to Nominal/Nominal.

	      IPMI_Threshold_Sensor_Upper_Non_Critical_Going_High
		     Defaults to Warning/Nominal.

	      IPMI_Threshold_Sensor_Upper_Critical_Going_Low
		     Defaults to Warning/Warning.

	      IPMI_Threshold_Sensor_Upper_Critical_Going_High
		     Defaults to Critical/Warning.

	      IPMI_Threshold_Sensor_Upper_Non_Recoverable_Going_Low
		     Defaults to Critical/Critical.

	      IPMI_Threshold_Sensor_Upper_Non_Recoverable_Going_High
		     Defaults to Critical/Critical.

       IPMI_Temperature_State
	      The  following  states  correspond  to Temperature sensor	events
	      that report an assertion or deassertion.

	      IPMI_Temperature_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Temperature_State_Asserted
		     Defaults to Warning.

       IPMI_Temperature_Limit
	      The following states correspond  to  Temperature	sensor	events
	      that report on limits.

	      IPMI_Temperature_Limit_Not_Exceeded
		     Defaults to Nominal.

	      IPMI_Temperature_Limit_Exceeded
		     Defaults to Critical.

       IPMI_Temperature_Transition_Severity
	      The  following  states  correspond  to Temperature sensor	events
	      that report on transition	severity.

	      IPMI_Temperature_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Temperature_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Temperature_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Temperature_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Temperature_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Temperature_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Temperature_Transition_Severity_Transition_To_Non_Recover-
	      able
		     Defaults to Critical.

	      IPMI_Temperature_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Temperature_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Voltage_State
	      The following states correspond to Voltage  sensor  events  that
	      report an	assertion or deassertion.

	      IPMI_Voltage_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Voltage_State_Asserted
		     Defaults to Warning.

       IPMI_Voltage_Limit
	      The  following  states  correspond to Voltage sensor events that
	      report on	limits.

	      IPMI_Voltage_Limit_Not_Exceeded
		     Defaults to Nominal.

	      IPMI_Voltage_Limit_Exceeded
		     Defaults to Critical.

       IPMI_Voltage_Performance
	      The following states correspond to Voltage  sensor  events  that
	      report on	performance.

	      IPMI_Voltage_Performance_Met
		     Defaults to Nominal/Nominal.

	      IPMI_Voltage_Performance_Lags
		     Defaults to Critical/Warning.

       IPMI_Voltage_Transition_Severity
	      The  following  states  correspond to Voltage sensor events that
	      report on	device severity.

	      IPMI_Voltage_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Voltage_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Voltage_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Voltage_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Voltage_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Voltage_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Voltage_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Voltage_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Current_Transition_Severity
	      The  following  states  correspond to Current sensor events that
	      report on	device severity.

	      IPMI_Current_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Current_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Current_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Current_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Current_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Current_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Current_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Current_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Fan_State
	      The following states correspond to Fan sensor events that	report
	      an assertion or deassertion.

	      IPMI_Fan_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Fan_State_Asserted
		     Defaults to Warning.

       IPMI_Fan_Transition_Severity
	      The following states correspond to Fan sensor events that	report
	      on device	severity.

	      IPMI_Fan_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_OK
		     Defaults to Warning.

	      IPMI_Fan_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Fan_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Fan_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Non_Re-
	      coverable
		     Defaults to Critical.

	      IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Fan_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Fan_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Fan_Device_Present
	      The following states correspond to Fan sensor events that	report
	      on device	installation.

	      IPMI_Fan_Device_Present_Device_Removed_Device_Absent
		     Defaults to Critical.

	      IPMI_Fan_Device_Present_Device_Inserted_Device_Present
		     Defaults to Nominal.

       IPMI_Fan_Transition_Availability
	      The following states correspond to Fan sensor events that	report
	      on device	availability.

	      IPMI_Fan_Transition_Availability_To_Running
		     Defaults to Nominal/Nominal.

	      IPMI_Fan_Transition_Availability_To_In_Test
		     Defaults to Warning/Warning.

	      IPMI_Fan_Transition_Availability_To_Power_Off
		     Defaults to Warning/Warning.

	      IPMI_Fan_Transition_Availability_To_On_Line
		     Defaults to Warning/Warning.

	      IPMI_Fan_Transition_Availability_To_Off_Line
		     Defaults to Warning/Warning.

	      IPMI_Fan_Transition_Availability_To_Off_Duty
		     Defaults to Warning/Warning.

	      IPMI_Fan_Transition_Availability_To_Degraded
		     Defaults to Critical/Warning.

	      IPMI_Fan_Transition_Availability_To_Power_Save
		     Defaults to Warning/Warning.

	      IPMI_Fan_Transition_Availability_Install_Error
		     Defaults to Critical/Critical.

       IPMI_Fan_Redundancy
	      The following states correspond to Fan sensor events that	report
	      on redundancy.

	      IPMI_Fan_Redundancy_Fully_Redundant
		     Defaults to Nominal/Nominal.

	      IPMI_Fan_Redundancy_Redundancy_Lost
		     Defaults to Critical/Warning.

	      IPMI_Fan_Redundancy_Redundancy_Degraded
		     Defaults to Warning/Warning.

	      IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Re-
	      dundant
		     Defaults to Critical/Warning.

	      IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_In-
	      sufficient_Redundancy
		     Defaults to Critical/Warning.

	      IPMI_Fan_Redundancy_Non_Redundant_Insufficient_Resources
		     Defaults to Critical/Warning.

	      IPMI_Fan_Redundancy_Redundancy_Degraded_From_Fully_Redundant
		     Defaults to Warning/Warning.

	      IPMI_Fan_Redundancy_Redundancy_Degraded_From_Non_Redundant
		     Defaults to Warning/Warning.

       IPMI_Physical_Security
	      The following states  correspond	to  Physical  Security	sensor
	      events w/	Physical Security specific output events.

	      IPMI_Physical_Security_General_Chassis_Intrusion
		     Defaults to Critical.

	      IPMI_Physical_Security_Drive_Bay_Intrusion
		     Defaults to Critical.

	      IPMI_Physical_Security_IO_Card_Intrusion
		     Defaults to Critical.

	      IPMI_Physical_Security_Processor_Area_Intrusion
		     Defaults to Critical.

	      IPMI_Physical_Security_LAN_Leash_Lost
		     Defaults to Critical.

	      IPMI_Physical_Security_Unauthorized_Dock_Undock
		     Defaults to Critical.

	      IPMI_Physical_Security_FAN_Area_Intrusion
		     Defaults to Critical.

       IPMI_Platform_Security_Violation_Attempt
	      The  following  states  correspond to Platform Violation Attempt
	      sensor events w/ Platform	Security  Violation  Attempt  specific
	      output events.

	      IPMI_Platform_Security_Violation_Attempt_Secure_Mode_Viola-
	      tion_Attempt
		     Defaults to Critical.

	      IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Vio-
	      lation_User_Password
		     Defaults to Critical.

	      IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Vio-
	      lation_Attempt_Setup_Password
		     Defaults to Critical.

	      IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Vio-
	      lation_Network_Boot_Password
		     Defaults to Critical.

	      IPMI_Platform_Security_Violation_Attempt_Other_Pre_Boot_Pass-
	      word_Violation
		     Defaults to Critical.

	      IPMI_Platform_Security_Violation_Attempt_Out_Of_Band_Ac-
	      cess_Password_Violation
		     Defaults to Critical.

       IPMI_Processor
	      The  following  states  correspond to Processor sensor events w/
	      Processor	specific output	events.

	      IPMI_Processor_IERR
		     Defaults to Critical.

	      IPMI_Processor_Thermal_Trip
		     Defaults to Critical.

	      IPMI_Processor_FRB1_BIST_Failure
		     Defaults to Critical.

	      IPMI_Processor_FRB2_Hang_In_POST_Failure
		     Defaults to Critical.

	      IPMI_Processor_FRB3_Processor_Startup_Initialization_Failure
		     Defaults to Critical.

	      IPMI_Processor_Configuration_Error
		     Defaults to Critical.

	      IPMI_Processor_SMBIOS_Uncorrectable_CPU_Complex_Error
		     Defaults to Critical.

	      IPMI_Processor_Processor_Presence_Detected
		     Defaults to Nominal.

	      IPMI_Processor_Processor_Disabled
		     Defaults to Critical.

	      IPMI_Processor_Terminator_Presence_Detected
		     Defaults to Critical.

	      IPMI_Processor_Processor_Automatically_Throttled
		     Defaults to Warning.

	      IPMI_Processor_Machine_Check_Exception
		     Defaults to Critical.

	      IPMI_Processor_Correctable_Machine_Check_Error
		     Defaults to Warning.

       IPMI_Processor_State
	      The following states correspond to Processor sensor events  that
	      report an	assertion or deassertion.

	      IPMI_Processor_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Processor_State_Asserted
		     Defaults to Critical.

       IPMI_Power_Supply
	      The following states correspond to Power Supply sensor events w/
	      Power Supply specific output events.

	      IPMI_Power_Supply_Presence_Detected
		     Defaults to Nominal/Nominal.

	      IPMI_Power_Supply_Power_Supply_Failure_Detected
		     Defaults to Critical/Critical.

	      IPMI_Power_Supply_Predictive_Failure
		     Defaults to Critical/Critical.

	      IPMI_Power_Supply_Power_Supply_Input_Lost_AC_DC
		     Defaults to Critical/Warning.

	      IPMI_Power_Supply_Power_Supply_Input_Lost_Or_Out_Of_Range
		     Defaults to Critical/Warning.

	      IPMI_Power_Supply_Power_Supply_Input_Out_Of_Range_But_Present
		     Defaults to Critical/Warning.

	      IPMI_Power_Supply_Configuration_Error
		     Defaults to Critical/Critical.

	      IPMI_Power_Supply_Power_Supply_Inactive
		     Defaults to Warning/Warning.

       IPMI_Power_Supply_State
	      The following states correspond to  Power_Supply	sensor	events
	      that report an assertion or deassertion.

	      IPMI_Power_Supply_State_Deasserted
		     Defaults to Critical.

	      IPMI_Power_Supply_State_Asserted
		     Defaults to Nominal.

       IPMI_Power_Supply_Transition_Severity
	      The  following  states  correspond to Power Supply sensor	events
	      that report on device severity.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recover-
	      able
		     Defaults to Critical.

	      IPMI_Power_Supply_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Power_Supply_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Power_Supply_Redundancy
	      The following states correspond to Power	Supply	sensor	events
	      that report on redundancy.

	      IPMI_Power_Supply_Redundancy_Fully_Redundant
		     Defaults to Nominal/Nominal.

	      IPMI_Power_Supply_Redundancy_Redundancy_Lost
		     Defaults to Critical/Warning.

	      IPMI_Power_Supply_Redundancy_Redundancy_Degraded
		     Defaults to Warning/Warning.

	      IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Redundant
		     Defaults to Critical/Warning.

	      IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Insufficient_Redundancy
		     Defaults to Critical/Warning.

	      IPMI_Power_Supply_Redundancy_Non_Redundant_Insufficient_Re-
	      sources
		     Defaults to Critical/Warning.

	      IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Fully_Re-
	      dundant
		     Defaults to Warning/Warning.

	      IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Non_Redun-
	      dant
		     Defaults to Warning/Warning.

       IPMI_Power_Unit
	      The following states correspond to Power Unit sensor  events  w/
	      Power Unit specific output events.

	      IPMI_Power_Unit_Power_Off_Power_Down
		     Defaults to Nominal/Nominal.

	      IPMI_Power_Unit_Power_Cycle
		     Defaults to Nominal/Nominal.

	      IPMI_Power_Unit_240VA_Power_Down
		     Defaults to Warning/Nominal.

	      IPMI_Power_Unit_Interlock_Power_Down
		     Defaults to Warning/Warning.

	      IPMI_Power_Unit_AC_Lost
		     Defaults to Critical/Warning.

	      IPMI_Power_Unit_Soft_Power_Control_Failure
		     Defaults to Critical/Critical.

	      IPMI_Power_Unit_Power_Unit_Failure_Detected
		     Defaults to Critical/Critical.

	      IPMI_Power_Unit_Predictive_Failure
		     Defaults to Critical/Critical.

       IPMI_Power_Unit_Device_Present
	      The following states correspond to Power Unit sensor events that
	      report on	device installation.

	      IPMI_Power_Unit_Device_Present_Device_Removed_Device_Absent
		     Defaults to Critical.

	      IPMI_Power_Unit_Device_Present_Device_Inserted_Device_Present
		     Defaults to Nominal.

       IPMI_Power_Unit_Redundancy
	      The following states correspond to Power Unit sensor events that
	      report on	redundancy.

	      IPMI_Power_Unit_Redundancy_Fully_Redundant
		     Defaults to Nominal/Nominal.

	      IPMI_Power_Unit_Redundancy_Redundancy_Lost
		     Defaults to Critical/Warning.

	      IPMI_Power_Unit_Redundancy_Redundancy_Degraded
		     Defaults to Warning/Warning.

	      IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Redundant
		     Defaults to Critical/Warning.

	      IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Insufficient_Redundancy
		     Defaults to Critical/Warning.

	      IPMI_Power_Unit_Redundancy_Non_Redundant_Insufficient_Resources
		     Defaults to Critical/Warning.

	      IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Fully_Redun-
	      dant
		     Defaults to Warning/Warning.

	      IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Non_Redun-
	      dant
		     Defaults to Warning/Warning.

       IPMI_Cooling_Device_Redundancy
	      The  following states correspond to Cooling Device sensor	events
	      that report on redundancy.

	      IPMI_Cooling_Device_Redundancy_Fully_Redundant
		     Defaults to Nominal/Nominal.

	      IPMI_Cooling_Device_Redundancy_Redundancy_Lost
		     Defaults to Critical/Warning.

	      IPMI_Cooling_Device_Redundancy_Redundancy_Degraded
		     Defaults to Warning/Warning.

	      IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Redundant
		     Defaults to Critical/Warning.

	      IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Insufficient_Redundancy
		     Defaults to Critical/Warning.

	      IPMI_Cooling_Device_Redundancy_Non_Redundant_Insufficient_Re-
	      sources
		     Defaults to Critical/Warning.

	      IPMI_Cooling_Device_Redundancy_Redundancy_De-
	      graded_From_Fully_Redundant
		     Defaults to Warning/Warning.

	      IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Non_Re-
	      dundant
		     Defaults to Warning/Warning.

       IPMI_Memory
	      The  following states correspond to Memory sensor	events w/ Mem-
	      ory specific output events.

	      IPMI_Memory_Correctable_Memory_Error
		     Defaults to Warning.

	      IPMI_Memory_Uncorrectable_Memory_Error
		     Defaults to Critical.

	      IPMI_Memory_Parity
		     Defaults to Critical.

	      IPMI_Memory_Memory_Scrub_Failed
		     Defaults to Critical.

	      IPMI_Memory_Memory_Device_Disabled
		     Defaults to Critical.

	      IPMI_Memory_Correctable_Memory_Error_Logging_Limit_Reached
		     Defaults to Warning.

	      IPMI_Memory_Presence_Detected
		     Defaults to Nominal.

	      IPMI_Memory_Configuration_Error
		     Defaults to Critical.

	      IPMI_Memory_Spare
		     Defaults to Nominal.

	      IPMI_Memory_Memory_Automatically_Throttled
		     Defaults to Warning.

	      IPMI_Memory_Critical_Overtemperature
		     Defaults to Critical.

       IPMI_Memory_State
	      The following states correspond to Memory	sensor events that re-
	      port an assertion	or deassertion.

	      IPMI_Memory_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Memory_State_Asserted
		     Defaults to Critical.

       IPMI_Memory_Transition_Severity
	      The following states correspond to Memory	sensor events that re-
	      port on transition severity.

	      IPMI_Memory_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Memory_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Memory_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Memory_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Memory_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Memory_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Memory_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Memory_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Memory_Redundancy
	      The following states correspond to Memory	sensor events that re-
	      port on redundancy.

	      IPMI_Memory_Redundancy_Fully_Redundant
		     Defaults to Nominal/Nominal.

	      IPMI_Memory_Redundancy_Redundancy_Lost
		     Defaults to Critical/Warning.

	      IPMI_Memory_Redundancy_Redundancy_Degraded
		     Defaults to Warning/Warning.

	      IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Redundant
		     Defaults to Critical/Warning.

	      IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Re-
	      sources_From_Insufficient_Redundancy
		     Defaults to Critical/Warning.

	      IPMI_Memory_Redundancy_Non_Redundant_Insufficient_Resources
		     Defaults to Critical/Warning.

	      IPMI_Memory_Redundancy_Redundancy_Degraded_From_Fully_Redundant
		     Defaults to Warning/Warning.

	      IPMI_Memory_Redundancy_Redundancy_Degraded_From_Non_Redundant
		     Defaults to Warning/Warning.

       IPMI_Drive_Slot
	      The following states correspond to Drive Slot sensor  events  w/
	      Drive Slot specific output events.

	      IPMI_Drive_Slot_Drive_Presence
		     Defaults to Nominal.

	      IPMI_Drive_Slot_Drive_Fault
		     Defaults to Critical.

	      IPMI_Drive_Slot_Predictive_Failure
		     Defaults to Critical.

	      IPMI_Drive_Slot_Hot_Spare
		     Defaults to Nominal.

	      IPMI_Drive_Slot_Consistency_Check_Parity_Check_In_Progress
		     Defaults to Nominal.

	      IPMI_Drive_Slot_In_Critical_Array
		     Defaults to Critical.

	      IPMI_Drive_Slot_In_Failed_Array
		     Defaults to Critical.

	      IPMI_Drive_Slot_Rebuild_Remap_In_Progress
		     Defaults to Nominal.

	      IPMI_Drive_Slot_Rebuild_Remap_Aborted
		     Defaults to Critical.

       IPMI_Drive_Slot_State
	      The following states correspond to Drive Slot sensor events that
	      report an	assertion or deassertion.

	      IPMI_Drive_Slot_State_Deasserted
		     Defaults to Warning.

	      IPMI_Drive_Slot_State_Asserted
		     Defaults to Nominal.

       IPMI_Drive_Slot_Predictive_Failure
	      The following states correspond to Drive_Slot sensor events that
	      report a predictive failure assertion or deassertion.

	      IPMI_Drive_Slot_Predictive_Failure_Deasserted
		     Defaults to Nominal.

	      IPMI_Drive_Slot_Predictive_Failure_Asserted
		     Defaults to Critical.

       IPMI_Drive_Slot_Device_Present
	      The following states correspond to Drive Slot sensor events that
	      report on	device installation.

	      IPMI_Drive_Slot_Device_Present_Device_Removed_Device_Absent
		     Defaults to Critical.

	      IPMI_Drive_Slot_Device_Present_Device_Inserted_Device_Present
		     Defaults to Nominal.

       IPMI_POST_Memory_Resize_State
	      The following states correspond to  POST	Memory	Resize	sensor
	      events that report an assertion or deassertion.

	      IPMI_POST_Memory_Resize_State_Deasserted
		     Defaults to Nominal.

	      IPMI_POST_Memory_Resize_State_Asserted
		     Defaults to Warning.

       IPMI_System_Firmware_Progress
	      The following states correspond to System	Firmware Progress sen-
	      sor events w/ System Firmware Progress specific output events.

	      IPMI_System_Firmware_Progress_System_Firmware_Error
		     Defaults to Critical.

	      IPMI_System_Firmware_Progress_System_Firmware_Hang
		     Defaults to Critical.

	      IPMI_System_Firmware_Progress_System_Firmware_Progress
		     Defaults to Nominal.

       IPMI_System_Firmware_Progress_Transition_Severity
	      The following states correspond to System	Firmware Progress sen-
	      sor events that report on	device severity.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_OK
		     Defaults to Nominal.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_Non_Critical_From_OK
		     Defaults to Warning.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_Critical_From_Less_Severe
		     Defaults to Critical.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_Non_Recoverable_From_Less_Severe
		     Defaults to Critical.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_Non_Critical_From_More_Severe
		     Defaults to Warning.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_Critical_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_System_Firmware_Progress_Transition_Severity_Transi-
	      tion_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_System_Firmware_Progress_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_System_Firmware_Progress_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Event_Logging_Disabled
	      The following states correspond to Event Logging Disabled	sensor
	      events w/

	      IPMI_Event_Logging_Disabled_Correctable_Memory_Error_Log-
	      ging_Disabled
		     Defaults to Critical.

	      IPMI_Event_Logging_Disabled_Event_Type_Logging_Disabled
		     Defaults to Critical.

	      IPMI_Event_Logging_Disabled_Log_Area_Reset_Cleared
		     Defaults to Nominal.

	      IPMI_Event_Logging_Disabled_All_Event_Logging_Disabled
		     Defaults to Critical.

	      IPMI_Event_Logging_Disabled_SEL_Full
		     Defaults to Critical.

	      IPMI_Event_Logging_Disabled_SEL_Almost_Full
		     Defaults to Warning.

	      IPMI_Event_Logging_Disabled_Correctable_Machine_Check_Error_Log-
	      ging_Disabled
		     Defaults to Critical.

       IPMI_System_Event
	      The following states correspond to System	Event sensor events w/
	      System Event specific output events.

	      IPMI_System_Event_System_Reconfigured
		     Defaults to Warning.

	      IPMI_System_Event_OEM_System_Boot_Event
		     Defaults to Nominal.

	      IPMI_System_Event_Undetermined_System_Hardware_Failure
		     Defaults to Critical.

	      IPMI_System_Event_Entry_Added_To_Auxiliary_Log
		     Defaults to Nominal.

	      IPMI_System_Event_PEF_Action
		     Defaults to Nominal.

	      IPMI_System_Event_Timestamp_Clock_Sync
		     Defaults to Warning.

       IPMI_System_Event_Transition_State
	      The following states correspond to System	 Event	sensor	events
	      that report a transition state.

	      IPMI_System_Event_Transition_State_Active
		     Defaults to Nominal.

	      IPMI_System_Event_Transition_State_Idle
		     Defaults to Nominal.

	      IPMI_System_Event_Transition_State_Busy
		     Defaults to Nominal.

       IPMI_System_Event_State
	      The  following  states  correspond to System Event sensor	events
	      that report an assertion or deassertion.

	      IPMI_System_Event_State_Deasserted
		     Defaults to Nominal.

	      IPMI_System_Event_State_Asserted
		     Defaults to Warning.

       IPMI_Critical_Interrupt
	      The following states correspond  to  Critical  Interrupt	sensor
	      events w/	Critical Interrupt specific output events.

	      IPMI_Critical_Interrupt_Front_Panel_NMI_Diagnostic_Interrupt
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_Bus_Timeout
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_IO_Channel_Check_NMI
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_Software_NMI
		     Defaults to Warning.

	      IPMI_Critical_Interrupt_PCI_PERR
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_PCI_SERR
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_EISA_Fail_Safe_Timeout
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_Bus_Correctable_Error
		     Defaults to Warning.

	      IPMI_Critical_Interrupt_Bus_Uncorrectable_Error
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_Fatal_NMI
		     Defaults to Critical.

	      IPMI_Critical_Interrupt_Bus_Fatal_Error
		     Defaults  to  Critical.   IPMI_Critical_Interrupt_Bus_De-
		     graded Defaults to	Warning.

       IPMI_Button_Switch
	      The following states correspond to Button/Switch	sensor	events
	      w/ Button/Switch specific	output events.

	      IPMI_Button_Switch_Power_Button_Pressed
		     Defaults to Info.

	      IPMI_Button_Switch_Sleep_Button_Pressed
		     Defaults to Info.

	      IPMI_Button_Switch_Reset_Button_Pressed
		     Defaults to Info.

	      IPMI_Button_Switch_FRU_Latch_Open
		     Defaults to Warning.

	      IPMI_Button_Switch_FRU_Service_Request_Button
		     Defaults to Warning.

       IPMI_Button_Switch_State
	      The  following  states correspond	to Button/Switch sensor	events
	      that report an assertion or deassertion.

	      IPMI_Button_Switch_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Button_Switch_State_Asserted
		     Defaults to Nominal.

       IPMI_Button_Switch_Transition_Severity
	      The following states correspond to Button	Switch	sensor	events
	      that report on device severity.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recov-
	      erable_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recov-
	      erable
		     Defaults to Critical.

	      IPMI_Button_Switch_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Button_Switch_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Module_Board_State
	      The  following  states  correspond to Module/Board sensor	events
	      that report an assertion or deassertion.

	      IPMI_Module_Board_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Module_Board_State_Asserted
		     Defaults to Critical.

       IPMI_Module_Board_Device_Present
	      The following states correspond to  Module/Board	sensor	events
	      that report on device installation.

	      IPMI_Module_Board_Device_Present_Device_Removed_Device_Absent
		     Defaults to Critical.

	      IPMI_Module_Board_Device_Present_Device_Inserted_Device_Present
		     Defaults to Nominal.

       IPMI_Chassis_Transition_Severity
	      The  following  states  correspond to Chassis sensor events that
	      report on	device severity.

	      IPMI_Chassis_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Chassis_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Chassis_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Chassis_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Chassis_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Chassis_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Chassis_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Chassis_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Chip_Set
	      The  following  states  correspond  to Chip Set sensor events w/
	      Chip Set specific	output events.

	      IPMI_Chip_Set_Soft_Power_Control_Failure
		     Defaults to Critical.

	      IPMI_Chip_Set_Thermal_Trip
		     Defaults to Critical.

       IPMI_Chip_Set_Transition_Severity
	      The following states correspond to Chip Set sensor  events  that
	      report on	device severity.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Chip_Set_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Chip_Set_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_Cable_Interconnect
	      The following states  correspond	to  Cable/Interconnect	sensor
	      events w/	Cable/Interconnect specific output events.

	      IPMI_Cable_Interconnect_Is_Connected
		     Defaults to Nominal.

	      IPMI_Cable_Interconnect_Configuration_Error
		     Defaults to Critical.

       IPMI_Cable_Interconnect_Transition_Severity
	      The  following  states  correspond  to Cable/Interconnect	sensor
	      events that report on device severity.

	      IPMI_Cable_Interconnect_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Cable_Interconnect_Transition_Severity_Transi-
	      tion_To_Non_Critical_From_OK
		     Defaults to Warning.

	      IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Cable_Interconnect_Transition_Severity_Transi-
	      tion_To_Non_Recoverable_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Cable_Interconnect_Transition_Severity_Transi-
	      tion_To_Non_Critical_From_More_Severe
		     Defaults to Warning.

	      IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Cable_Interconnect_Transition_Severity_Transi-
	      tion_To_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Cable_Interconnect_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Cable_Interconnect_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_System_Boot_Initiated
	      The following states correspond to System	Boot Initiated	sensor
	      events w/	System Boot Initiated specific output events.
	      IPMI_System_Boot_Initiated_Initiated_By_Power_Up	 Defaults   to
	      Nominal.	IPMI_System_Boot_Initiated_Initiated_By_Hard_Reset De-
	      faults	 to	Nominal.     IPMI_System_Boot_Initiated_Initi-
	      ated_By_Warm_Reset Defaults to Nominal.  IPMI_System_Boot_Initi-
	      ated_User_Requested_PXE_Boot  Defaults  to  Nominal.   IPMI_Sys-
	      tem_Boot_Initiated_Automatic_Boot_To_Diagnostic Defaults to Nom-
	      inal.	IPMI_System_Boot_Initiated_OS_Run_Time_Software_Initi-
	      ated_Hard_Reset Defaults	to  Warning.   IPMI_System_Boot_Initi-
	      ated_OS_Run_Time_Software_Initiated_Warm_Reset Defaults to Warn-
	      ing.  IPMI_System_Boot_Initiated_System_Restart Defaults to Nom-
	      inal.

       IPMI_Boot_Error
	      The  following  states correspond	to Boot	Error sensor events w/
	      Boot Error specific output events.

	      IPMI_Boot_Error_No_Bootable_Media
		     Defaults to Critical.

	      IPMI_Boot_Error_Non_Bootable_Diskette_Left_In_Drive
		     Defaults to Critical.

	      IPMI_Boot_Error_PXE_Server_Not_Found
		     Defaults to Critical.

	      IPMI_Boot_Error_Invalid_Boot_Sector
		     Defaults to Critical.

	      IPMI_Boot_Error_Timeout_Waiting_For_User_Selec-
	      tion_Of_Boot_Source
		     Defaults to Warning.

       IPMI_Boot_Error_State
	      The following states correspond to Boot Error sensor events that
	      report an	assertion or deassertion.

	      IPMI_Boot_Error_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Boot_Error_State_Asserted
		     Defaults to Critical.

       IPMI_Boot_Error_Transition_Severity
	      The following states correspond to Boot Error sensor events that
	      report on	device severity.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recover-
	      able_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recover-
	      able
		     Defaults to Critical.

	      IPMI_Boot_Error_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Boot_Error_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_OS_Boot
	      The  following  states correspond	to OS Boot sensor events w/ OS
	      Boot specific output events.
	      IPMI_OS_Boot_A_Boot_Completed	Defaults      to      Nominal.
	      IPMI_OS_Boot_C_Boot_Completed	 Defaults      to     Nominal.
	      IPMI_OS_Boot_PXE_Boot_Completed	  Defaults     to     Nominal.
	      IPMI_OS_Boot_Diagnostic_Boot_Completed   Defaults	  to  Nominal.
	      IPMI_OS_Boot_CD_ROM_Boot_Completed    Defaults	to    Nominal.
	      IPMI_OS_Boot_ROM_Boot_Completed	  Defaults     to     Nominal.
	      IPMI_OS_Boot_Boot_Completed_Boot_Device_Not_Specified   Defaults
	      to      Warning.	     IPMI_OS_Boot_Base_OS_Hypervisor_Installa-
	      tion_Started Defaults to Nominal.	 IPMI_OS_Boot_Base_OS_Hypervi-
	      sor_Installation_Completed       Defaults	      to      Nominal.
	      IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Aborted Defaults to
	      Warning.	   IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Failed
	      Defaults to Critical.

       IPMI_OS_Critical_Stop
	      The following states  correspond	to  OS	Critical  Stop	sensor
	      events w/	OS Critical Stop specific output events.
	      IPMI_OS_Critical_Stop_Critical_Stop_During_OS_Load  Defaults  to
	      Critical.	 IPMI_OS_Critical_Stop_Run_Time_Critical_Stop Defaults
	      to Critical.  IPMI_OS_Critical_Stop_OS_Graceful_Stop Defaults to
	      Warning.	IPMI_OS_Critical_Stop_OS_Graceful_Shutdown Defaults to
	      Warning.	  IPMI_OS_Critical_Stop_Soft_Shutdown_Initiated_By_PEF
	      Defaults to Warning.  IPMI_OS_Critical_Stop_Agent_Not_Responding
	      Defaults to Critical.

       IPMI_OS_Critical_Stop_State
	      The  following  states  correspond  to  OS  Critical Stop	sensor
	      events that report an assertion or deassertion.

	      IPMI_OS_Critical_Stop_State_Deasserted
		     Defaults to Nominal.

	      IPMI_OS_Critical_Stop_State_Asserted
		     Defaults to Critical.

       IPMI_Slot_Connector
	      The following states correspond to Slot Connector	sensor	events
	      w/ Slot Connector	specific output	events.

	      IPMI_Slot_Connector_Fault_Status_Asserted
		     Defaults to Critical.

	      IPMI_Slot_Connector_Identify_Status_Asserted
		     Defaults to Warning.

	      IPMI_Slot_Connector_Slot_Connector_Device_Installed_Attached
		     Defaults to Nominal.

	      IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Installation
		     Defaults to Nominal.

	      IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Removal
		     Defaults to Nominal.

	      IPMI_Slot_Connector_Slot_Power_Is_Off
		     Defaults to Nominal.

	      IPMI_Slot_Connector_Slot_Connector_Device_Removal_Request
		     Defaults to Warning.

	      IPMI_Slot_Connector_Interlock_Asserted
		     Defaults to Warning.

	      IPMI_Slot_Connector_Slot_Is_Disabled
		     Defaults to Warning.

	      IPMI_Slot_Connector_Slot_Holds_Spare_Device
		     Defaults to Nominal.

       IPMI_Slot_Connector_Transition_Severity
	      The  following states correspond to Slot Connector sensor	events
	      that report on device severity.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_OK
		     Defaults to Nominal.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_OK
		     Defaults to Warning.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_Criti-
	      cal_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recov-
	      erable_From_Less_Severe
		     Defaults to Critical.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Criti-
	      cal_From_More_Severe
		     Defaults to Warning.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_Criti-
	      cal_From_Non_Recoverable
		     Defaults to Critical.

	      IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recov-
	      erable
		     Defaults to Critical.

	      IPMI_Slot_Connector_Transition_Severity_Monitor
		     Defaults to Warning.

	      IPMI_Slot_Connector_Transition_Severity_Informational
		     Defaults to Nominal.

       IPMI_System_ACPI_Power_State

	      IPMI_System_ACPI_Power_State_S0_G0
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S1
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S2
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S3
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S4
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S5_G2
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S4_S5_Soft_Off
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_G3_Mechanical_Off
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_Sleeping_in_an_S1_S2_or_S3_States
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_G1_Sleeping
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_S5_Entered_By_Override
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_Legacy_ON_State
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_Legacy_OFF_State
		     Defaults to Nominal.

	      IPMI_System_ACPI_Power_State_Unspecified
		     Defaults to Critical.

	      IPMI_System_ACPI_Power_State_Unknown
		     Defaults to Critical.

       IPMI_Watchdog2
	      The following states correspond to Watchdog 2 sensor  events  w/
	      Watchdog 2 specific output events.

	      IPMI_Watchdog2_Timer_Expired
		     Defaults to Warning.

	      IPMI_Watchdog2_Hard_Reset
		     Defaults to Critical.

	      IPMI_Watchdog2_Power_Down
		     Defaults to Critical.

	      IPMI_Watchdog2_Power_Cycle
		     Defaults to Critical.

	      IPMI_Watchdog2_Reserved1
		     Defaults to Nominal.

	      IPMI_Watchdog2_Reserved2
		     Defaults to Nominal.

	      IPMI_Watchdog2_Reserved3
		     Defaults to Nominal.

	      IPMI_Watchdog2_Reserved4
		     Defaults to Nominal.

	      IPMI_Watchdog2_Timer_Interrupt
		     Defaults to Warning.

       IPMI_Platform_Alert
	      The  following states correspond to Platform Alert sensor	events
	      w/ Platform Alert	specific output	events.
	      IPMI_Platform_Alert_Platform_Generated_Page Defaults to Nominal.
	      IPMI_Platform_Alert_Platform_Generated_LAN_Alert	 Defaults   to
	      Nominal.	IPMI_Platform_Alert_Platform_Event_Trap_Generated  De-
	      faults	to    Nominal.	   IPMI_Platform_Alert_Platform_Gener-
	      ated_SNMP_Trap Defaults to Nominal.

       IPMI_Platform_Alert_State
	      The following states correspond to Platform Alert	sensor	events
	      that report an assertion or deassertion.

	      IPMI_Platform_Alert_State_Deasserted
		     Defaults to Nominal.

	      IPMI_Platform_Alert_State_Asserted
		     Defaults to Critical.

       IPMI_Entity_Presence
	      The following states correspond to Entity	Presence sensor	events
	      w/ Entity	Presence specific output events.

	      IPMI_Entity_Presence_Entity_Present
		     Defaults to Nominal.

	      IPMI_Entity_Presence_Entity_Absent
		     Defaults to Critical.

	      IPMI_Entity_Presence_Entity_Disabled
		     Defaults to Critical.

       IPMI_Entity_Presence_Device_Present
	      The following states correspond to Entity	Presence sensor	events
	      that report on device installation.

	      IPMI_Entity_Presence_Device_Present_Device_Removed_Device_Absent
		     Defaults to Nominal.

	      IPMI_Entity_Presence_Device_Present_Device_Inserted_De-
	      vice_Present
		     Defaults to Nominal.

       IPMI_LAN
	      The following states correspond to LAN sensor events w/ LAN spe-
	      cific output events.
	      IPMI_LAN_Heartbeat Defaults to Nominal.  IPMI_LAN_Heartbeat_Lost
	      Defaults to Warning.

       IPMI_Management_Subsystem_Health
	      The following states correspond to Management  Subsystem	Health
	      sensor  events  w/  Management  Subsystem	Health specific	output
	      events.

	      IPMI_Management_Subsystem_Health_Sensor_Access_Degraded_Or_Un-
	      available
		     Defaults to Critical.

	      IPMI_Management_Subsystem_Health_Controller_Access_De-
	      graded_Or_Unavailable
		     Defaults to Critical.

	      IPMI_Management_Subsystem_Health_Management_Controller_Off_Line
		     Defaults to Critical.

	      IPMI_Management_Subsystem_Health_Management_Controller_Unavail-
	      able
		     Defaults to Critical.

	      IPMI_Management_Subsystem_Health_Sensor_Failure
		     Defaults to Critical.

	      IPMI_Management_Subsystem_Health_FRU_Failure
		     Defaults to Critical.

       IPMI_Battery
	      The following states correspond to Battery sensor	events w/ Bat-
	      tery specific output events.

	      IPMI_Battery_Battery_Low
		     Defaults to Warning.

	      IPMI_Battery_Battery_Failed
		     Defaults to Critical.

	      IPMI_Battery_Battery_Presence_Detected
		     Defaults to Nominal.

       IPMI_Session_Audit
	      The following states correspond to Session Audit	sensor	events
	      w/ Session Audit specific	output events.

	      IPMI_Session_Audit_Session_Activated
		     Defaults to Nominal.

	      IPMI_Session_Audit_Session_Deactivated
		     Defaults to Nominal.

	      IIPMI_Session_Audit_Invalid_Username_Or_Password
		     Defaults to Warning.

	      IPMI_Session_Audit_Invalid_Password_Disable
		     Defaults to Critical.

       IPMI_Version_Change_Transition_Severity
	      The  following states correspond to Version Change sensor	events
	      that Version Change specific output events.

	      IPMI_Version_Change_Hardware_Change_Detected_With_Associated_En-
	      tity
		     Defaults to Warning.

	      IPMI_Version_Change_Firmware_Or_Software_Change_De-
	      tected_With_Associated_Entity
		     Defaults to Warning.

	      IPMI_Version_Change_Hardware_Incompatability_Detected_With_Asso-
	      ciated_Entity
		     Defaults to Critical.

	      IPMI_Version_Change_Firmware_Or_Software_Incompatability_De-
	      tected_With_Associated_Entity
		     Defaults to Critical.

	      IPMI_Version_Change_Entity_Is_Of_An_Invalid_Or_Unsupported_Hard-
	      ware_Version
		     Defaults to Critical.

	      IPMI_Version_Change_Entity_Contains_An_Invalid_Or_Unsup-
	      ported_Firmware_Or_Software_Version
		     Defaults to Critical.

	      IPMI_Version_Change_Hardware_Change_Detected_With_Associated_En-
	      tity_Was_Successful
		     Defaults to Nominal.

	      IPMI_Version_Change_Software_Or_FW_Change_Detected_With_Associ-
	      ated_Entity_Was_Successful
		     Defaults to Nominal.

       IPMI_FRU_State
	      The following states correspond to FRU State  sensor  events  w/
	      FRU State	specific output	events.

	      IPMI_FRU_State_FRU_Not_Installed
		     Defaults to Critical.

	      IPMI_FRU_State_FRU_Inactive
		     Defaults to Critical.

	      IPMI_FRU_State_FRU_Activation_Requested
		     Defaults to Warning.

	      IPMI_FRU_State_FRU_Activation_In_Progress
		     Defaults to Warning.

	      IPMI_FRU_State_FRU_Active
		     Defaults to Nominal.

	      IPMI_FRU_State_FRU_Deactivation_Requested
		     Defaults to Warning.

	      IPMI_FRU_State_FRU_Deactivation_In_Progress
		     Defaults to Warning.

	      IPMI_FRU_State_FRU_Communication_Lost
		     Defaults to Critical.

       IPMI_OEM
	      The following configuration options can be used to configure OEM
	      system event log events. Interpretations rules  for  a  specific
	      combination of Manufacturer-ID, Product-ID, and Record-Type, are
	      iterated through and the worst resulting	sensor	state  is  re-
	      turned (i.e. Warning < Nominal, Critical < Warning). If no match
	      is found,	no state is returned for the OEM event.

	      For each of the configuration options  below,  _Manufacturer-ID_
	      is  the  numeric	IANA  manufacturer  ID for the manufacturer in
	      question.	 The _Product-ID_ is one or more  numeric  IDs	repre-
	      senting  the  manufacturer's  product.   The _Product-ID_	can be
	      listed as	a single numeric number	(e.g. 1234), a	range  of  IDs
	      separated	 by a dash (e.g. 12-20), or a list of specific product
	      IDs separted by a	plus (e.g. 12+19+22). Both the Manufacturer-ID
	      and  Product-ID can be found using bmc-info(8).  Multiple	_Manu-
	      facturer-ID_ and _Product-ID_ pairs can be  input	 separated  by
	      commas.

	      IPMI_OEM_Sensor_System_Event_Record     _Manufacturer-ID_:_Prod-
	      uct-ID_,... Event-Reading-Type-Code Sensor-Type  Event-Direction
	      EventData1 EventData2 EventData3 State
		     IPMI_OEM_System_Event_Record  can	be used	to configure a
		     state  interpretation  for	 a  specific  Manufacturer-ID,
		     Product-ID, Event-Reading-Type-Code, and Sensor-Type com-
		     bination, and  a  specific	 Event-Direction,  EventData1,
		     EventData2,  and  EventData3.  The	 Event-Direction field
		     must specify Assertion, Deassertion, or ANY. Each of  the
		     EventData	fields must specify a hex byte to match	or the
		     keyword  ANY   to	 match	 anything.   The   Event-Read-
		     ing-Type-Code and Sensor-Type need	not be OEM types. They
		     may be non-OEM types and used to  provide	interpretation
		     rules  for	sensors	that may be behaving outside the stan-
		     dard of the IPMI specification.

	      IPMI_OEM_Timestamped_Record   _Manufacturer-ID_:_Product-ID_,...
	      Record-Type  OEMDATA1  OEMDATA2  OEMDATA3	OEMDATA4 OEMDATA5 OEM-
	      DATA6 State
		     IPMI_OEM_Timestamped_Record can be	used to	 configure  an
		     interpretation  for  a  specific  Manufacturer-ID,	 Prod-
		     uct-ID,  Record-Type,  and	 OEM  data  combination.   The
		     Record-Type  must	be  a legal record type	for OEM	Times-
		     tamped Records (currently 0xC0-0xDF). Each	of the OEMDATA
		     fields  must  specify  a hex byte to match	or the keyword
		     ANY to match anything.

	      IPMI_OEM_Non_Timestamped_Record	      _Manufacturer-ID_:_Prod-
	      uct-ID_,... Record-Type OEMDATA1 OEMDATA2	OEMDATA3 OEMDATA4 OEM-
	      DATA5 OEMDATA6 OEMDATA7 OEMDATA8	OEMDATA9  OEMDATA10  OEMDATA11
	      OEMDATA12	OEMDATA13 State
		     IPMI_OEM_Non_Timestamped_Record  can be used to configure
		     an	interpretation for a specific  Manufacturer-ID,	 Prod-
		     uct-ID,   Record-Type,  and  OEM  data  combination.  The
		     Record-Type must be a legal  record  type	for  OEM  Non-
		     Timestamped  Records  (currently  0xEO-0xFF). Each	of the
		     OEMDATA fields must specify a hex byte to	match  or  the
		     keyword ANY to match anything.

FILES
       /usr/local/etc/freeipmi/freeipmi_interpret_sel.conf

REPORTING BUGS
       Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.

COPYRIGHT
       Copyright (C) 2007-2015 Lawrence	Livermore National Security, LLC.

       This library is free software; you can redistribute it and/or modify it
       under the terms of the GNU General Public License as published  by  the
       Free  Software Foundation; either version 3 of the License, or (at your
       option) any later version.

SEE ALSO
       libfreeipmi(3), libipmimonitoring(3), ipmi-sel(8)

       http://www.gnu.org/software/freeipmi/

FreeIPMI 1.6.5			  2020-05-21	     FREEIPMI_INTERPRET_SEL(5)

NAME | DESCRIPTION | FORMAT | OPTIONS | FILES | REPORTING BUGS | COPYRIGHT | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=freeipmi_interpret_sel.conf&sektion=5&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help