Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
FREEIPMI(5)			 Configuration			   FREEIPMI(5)

NAME
       freeipmi.conf - specify default values to FreeIPMI

DESCRIPTION
       The  FreeIPMI  configuration  file can be used to set alternate default
       values to many FreeIPMI tools so	values don't have to be	configured  on
       the  command line.  This	allows users to	avoid typing in	a long list of
       command line options every time a command is executed. It can  also  be
       used to hide usernames, passwords, and other sensitive information from
       the ps(1) command.

       Currently, the tools that can be	configured with	the configuration file
       are:   bmc-device(8),  bmc-info(8),  bmc-watchdog(8),  ipmi-chassis(8),
       ipmi-config(8),	ipmi-fru(8),  ipmi-oem(8),  ipmi-pet(8),  ipmi-raw(8),
       ipmi-sel(8), ipmi-sensors(8), ipmiconsole(8), and ipmipower(8).

       By   default,   the   configuration   file   is	 stored	  at  /usr/lo-
       cal/etc/freeipmi/freeipmi.conf.sample. But users	may select a different
       configuration file at the command line with the --config-file option.

       Values  specified on the	command	line override the configuration	values
       specified in the	configuration file.

FORMAT
       The configuration options that can be specified	in  the	 configuration
       file  are  listed  below. Each configuration option must	be listed on a
       separate	line. Arguments	for an option are separated by any  amount  of
       whitespace.  Multiple arguments are also	separated by whitespace.  Com-
       ments can be marked by using the	pound sign ("#") character, and	 lines
       can be continued	on the next using backslash ("\").

       Note  that  it is possible to list the username,	password and other po-
       tentially sensitive information in the configuration file. If this data
       is  stored  in a	configuration file, system administrators should limit
       access to this file.

GENERAL	OPTIONS
       The following options are options generally available to	all tools, al-
       though  specific	options	may be ignored by some.	(For example, ipmicon-
       sole(8) and ipmipower(8)	do not perform in-band	communication,	there-
       fore  they  would  ignore in-band communication options.	Similarly bmc-
       watchdog(8) does	not perform out-of-band	 communication,	 therefore  it
       would ignore all	out-of-band options).

       driver-type IPMIDRIVER
	      Specify the default driver type to use.

       disable-auto-probe ENABLE|DISABLE
	      Specify if IPMI devices should be	probed for default settings.

       driver-address DRIVER-ADDRESS
	      Specify the default in-band driver address to use.

       driver-device DEVICE
	      Specify the default in-band driver device	path to	use.

       register-spacing	REGISTER-SPACING
	      Specify the default in-band driver register spacing to use.

       target-channel-number CHANNEL-NUMBER
	      Specify the default in-band driver target	channel	number.

       target-slave-address SLAVE-ADDRESS
	      Specify the default in-band driver target	slave address.

       username	USERNAME
	      Specify the default username to use.

       password	PASSWORD
	      Specify the default password to use.

       k_g str
	      Specify  the  default  BMC key (K_g) to use. Prefix with '0x' to
	      enter the	key in hex.

       session-timeout MILLISECONDS
	      Specify the default session timeout length to use	 in  millisec-
	      onds.

       retransmission-timeout MILLISECONDS
	      Specify the default retransmission timeout length	to use in mil-
	      liseconds.

       authentication-type AUTHENTICATION-TYPE
	      Specify the default authentication type to  use.	The  following
	      authentication types are supported: NONE,	STRAIGHT_PASSWORD_KEY,
	      MD2, and MD5.

       cipher-suite-id CIPHER-SUITE-ID
	      Specify the default cipher suite id to use. The following	cipher
	      suite ids	are supported: 0, 1, 2,	3, 6, 7, 8, 11,	12.

       privilege-level PRIVILEGE-LEVEL
	      Specify  the default privilege type to use. The following	privi-
	      lege levels are supported: USER, OPERATOR, ADMIN.

       workaround-flags	WORKAROUNDS
	      Specify default workaround flags to  use.	 Multiple  workarounds
	      can  be  specified separated by whitespace. Please see tool man-
	      pages for	details	about available	workarounds for	each tool. The
	      following	workarounds are	supported: assumeio, spinpoll, idzero,
	      forcepermsg, unexpectedauth, endianseq,  noauthcodecheck,	 auth-
	      cap,   nochecksumcheck,  intel20,	 supermicro20,	sun20,	opens-
	      esspriv, integritycheckvalue,  assumemaxsdrrecordcount,  solpay-
	      loadsize,	solport, solstatus, solchannelsupport, serialalertsde-
	      ferred,  solpacketseq,   skipchecks,   assumesystemevent,	  dis-
	      cretereading,  ignorescanningdisabled, assumebmcowner, ignoreau-
	      thcode, slowcommit, veryslowcommit,  solchannelassumelanchannel,
	      ignorestateflag, malformedack, guidformat, ipmiping.

SDR OPTIONS
       The  following  options	are specific to	tools that use the sensor data
       repository (SDR). They will be ignored by all other tools.

       quiet-cache ENABLE|DISABLE
	      Specify if cache creation/deletion  information  should  not  be
	      output by	default.

       sdr-cache-directory DIRECTORY
	      Specify the default sdr cache directory to use.

TIME OPTIONS
       The  following  options are specific to tools that may output time val-
       ues. They will be ignored by all	other tools.

       utc-to-localtime	ENABLE|DISABLE
	      Specify if time should be	converted from assumed UTC  to	local-
	      time by default.

       localtime-to-utc	ENABLE|DISABLE
	      Specify if time should be	converted from localtime to UTC	by de-
	      fault.

       utc-offset SECONDS
	      Specify a	default	UTC offset to be added to timestamps.

HOSTRANGED OPTIONS
       The following options are specific to  tools  that  support  hostranged
       output. They will be ignored by all other tools.

       buffer-output ENABLE|DISABLE
	      Specify if hostranged output should be buffered by default.

       consolidate-output ENABLE|DISABLE
	      Specify if hostranged output should be consolidated by default.

       fanout COUNT
	      Specify the default multiple host	fanout to use.

       eliminate ENABLE|DISABLE
	      Specify if undetected hosts should be eliminated by default.

       always-prefix ENABLE|DISABLE
	      Specify if output	should be always prefixed by default.

BMC-DEVICE OPTIONS
       The  following options are specific to bmc-device(8).  They will	be ig-
       nored by	other tools.

       bmc-device-username USERNAME
	      Specify the default username to use for bmc-device(8).  If spec-
	      ified, will override the general option username above.

       bmc-device-password PASSWORD
	      Specify the default password to use for bmc-device(8).  If spec-
	      ified, will override the general option password above.

       bmc-device-k_g str
	      Specify the default BMC key (K_g)	to use for bmc-device(8).   If
	      specified,  will	override  the general option k_g above.	Prefix
	      with '0x'	to enter the key in hex.

       bmc-device-authentication-type AUTHENTICATION-TYPE
	      Specify the default  authentication  type	 to  use  for  bmc-de-
	      vice(8).	If specified, will override the	general	option authen-
	      tication-type above. The following authentication	types are sup-
	      ported: NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       bmc-device-cipher-suite-id CIPHER-SUITE-ID
	      Specify  the  default  cipher suite id to	use for	bmc-device(8).
	      If specified, will override the general  option  cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       bmc-device-privilege-level PRIVILEGE-LEVEL
	      Specify the default privilege type to use	for bmc-device(8).  If
	      specified,  will	override  the  general	option privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       bmc-device-workaround-flags WORKAROUNDS
	      Specify  default	workaround flags to use	for bmc-device(8).  If
	      specified, will override the  general  options  workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.  Please see bmc-device(8)	manpage	 for  available	 work-
	      arounds.

BMC-INFO OPTIONS
       The  following  options	are specific to	bmc-info(8).  They will	be ig-
       nored by	other tools.

       bmc-info-username USERNAME
	      Specify the default username to use for bmc-info(8).  If	speci-
	      fied, will override the general option username above.

       bmc-info-password PASSWORD
	      Specify  the default password to use for bmc-info(8).  If	speci-
	      fied, will override the general option password above.

       bmc-info-k_g str
	      Specify the default BMC key (K_g)	to use	for  bmc-info(8).   If
	      specified,  will	override  the general option k_g above.	Prefix
	      with '0x'	to enter the key in hex.

       bmc-info-authentication-type AUTHENTICATION-TYPE
	      Specify the default authentication type to use for  bmc-info(8).
	      If  specified,  will override the	general	option authentication-
	      type above. The following	authentication	types  are  supported:
	      NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       bmc-info-cipher-suite-id	CIPHER-SUITE-ID
	      Specify  the default cipher suite	id to use for bmc-info(8).  If
	      specified, will  override	 the  general  option  cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       bmc-info-privilege-level	PRIVILEGE-LEVEL
	      Specify the default privilege type to use	for  bmc-info(8).   If
	      specified,  will	override  the  general	option privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       bmc-info-workaround-flags WORKAROUNDS
	      Specify  default	workaround  flags  to use for bmc-info(8).  If
	      specified, will override the  general  options  workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.  Please  see  bmc-info(8)	manpage	 for  available	 work-
	      arounds.

       bmc-info-interpret-oem-data ENABLE|DISABLE
	      Specify  if bmc-info should attempt to interpret OEM data	by de-
	      fault or not.

BMC-WATCHDOG OPTIONS
       The following options are specific to bmc-watchdog(8).	They  will  be
       ignored by other	tools.

       bmc-watchdog-workaround-flags WORKAROUNDS
	      Specify default workaround flags to use for bmc-watchdog(8).  If
	      specified, will override the  general  options  workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.  Please see bmc-watchdog(8) manpage for  available	 work-
	      arounds.

       bmc-watchdog-verbose-logging ENABLE|DISABLE
	      Specify if logging will be verbose by default.

       bmc-watchdog-no-logging ENABLE|DISABLE
	      Specify if logging will be disabled by default.

IPMI-CHASSIS OPTIONS
       The  following  options	are specific to	ipmi-chassis(8).  They will be
       ignored by other	tools.

       ipmi-chassis-username USERNAME
	      Specify the default username to  use  for	 ipmi-chassis(8).   If
	      specified, will override the general option username above.

       ipmi-chassis-password PASSWORD
	      Specify  the  default  password  to use for ipmi-chassis(8).  If
	      specified, will override the general option password above.

       ipmi-chassis-k_g	str
	      Specify the default BMC key (K_g)	to  use	 for  ipmi-chassis(8).
	      If specified, will override the general option k_g above.	Prefix
	      with '0x'	to enter the key in hex.

       ipmi-chassis-authentication-type	AUTHENTICATION-TYPE
	      Specify the default authentication type to  use  for  ipmi-chas-
	      sis(8).	If specified, will override the	general	option authen-
	      tication-type above. The following authentication	types are sup-
	      ported: NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       ipmi-chassis-cipher-suite-id CIPHER-SUITE-ID
	      Specify  the default cipher suite	id to use for ipmi-chassis(8).
	      If specified, will override the general  option  cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       ipmi-chassis-privilege-level PRIVILEGE-LEVEL
	      Specify the default privilege type to use	 for  ipmi-chassis(8).
	      If  specified,  will override the	general	option privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       ipmi-chassis-workaround-flags WORKAROUNDS
	      Specify default workaround flags to use for ipmi-chassis(8).  If
	      specified, will override the  general  options  workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.  Please see ipmi-chassis(8) manpage for  available	 work-
	      arounds.

IPMI-CONFIG OPTIONS
       The following options are specific to ipmi-config(8).  They will	be ig-
       nored by	other tools.

       ipmi-config-username USERNAME
	      Specify the default username  to	use  for  ipmi-config(8).   If
	      specified, will override the general option username above.

       ipmi-config-password PASSWORD
	      Specify  the  default  password  to  use for ipmi-config(8).  If
	      specified, will override the general option password above.

       ipmi-config-k_g str
	      Specify the default IPMI key (K_g) to  use  for  ipmi-config(8).
	      If specified, will override the general option k_g above.	Prefix
	      with '0x'	to enter the key in hex.

       ipmi-config-authentication-type AUTHENTICATION-TYPE
	      Specify the default authentication type  to  use	for  ipmi-con-
	      fig(8).	If specified, will override the	general	option authen-
	      tication-type above. The following authentication	types are sup-
	      ported: NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       ipmi-config-cipher-suite-id CIPHER-SUITE-ID
	      Specify  the  default cipher suite id to use for ipmi-config(8).
	      If specified, will override the general  option  cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       ipmi-config-privilege-level PRIVILEGE-LEVEL
	      Specify the default privilege type to  use  for  ipmi-config(8).
	      If  specified,  will override the	general	option privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       ipmi-config-workaround-flags WORKAROUNDS
	      Specify  default workaround flags	to use for ipmi-config(8).  If
	      specified, will override the  general  options  workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.  Please see ipmi-config(8)	manpage	 for  available	 work-
	      arounds.

       ipmi-config-verbose-count COUNT
	      Specify default verbose count to use for ipmi-config(8).

IPMI-DCMI OPTIONS
       The  following  options are specific to ipmi-dcmi(8).  They will	be ig-
       nored by	other tools.

       ipmi-dcmi-username USERNAME
	      Specify the default username to use for ipmi-dcmi(8).  If	speci-
	      fied, will override the general option username above.

       ipmi-dcmi-password PASSWORD
	      Specify the default password to use for ipmi-dcmi(8).  If	speci-
	      fied, will override the general option password above.

       ipmi-dcmi-k_g str
	      Specify the default BMC key (K_g)	to use for  ipmi-dcmi(8).   If
	      specified,  will	override  the general option k_g above.	Prefix
	      with '0x'	to enter the key in hex.

       ipmi-dcmi-authentication-type AUTHENTICATION-TYPE
	      Specify the default authentication type to use for ipmi-dcmi(8).
	      If  specified,  will override the	general	option authentication-
	      type above. The following	authentication	types  are  supported:
	      NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       ipmi-dcmi-cipher-suite-id CIPHER-SUITE-ID
	      Specify the default cipher suite id to use for ipmi-dcmi(8).  If
	      specified, will  override	 the  general  option  cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       ipmi-dcmi-privilege-level PRIVILEGE-LEVEL
	      Specify the default privilege type to use	for ipmi-dcmi(8).   If
	      specified,  will	override  the  general	option privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       ipmi-dcmi-workaround-flags WORKAROUNDS
	      Specify  default	workaround  flags to use for ipmi-dcmi(8).  If
	      specified, will override the  general  options  workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.  Please see  ipmi-dcmi(8)	manpage	 for  available	 work-
	      arounds.

       ipmi-dcmi-interpret-oem-data ENABLE|DISABLE
	      Specify if ipmi-dcmi should attempt to interpret OEM data	by de-
	      fault or not.

IPMI-FRU OPTIONS
       The following options are specific to ipmi-fru(8).  They	 will  be  ig-
       nored by	other tools.

       ipmi-fru-username USERNAME
	      Specify  the default username to use for ipmi-fru(8).  If	speci-
	      fied, will override the general option username above.

       ipmi-fru-password PASSWORD
	      Specify the default password to use for ipmi-fru(8).  If	speci-
	      fied, will override the general option password above.

       ipmi-fru-k_g str
	      Specify  the  default  BMC key (K_g) to use for ipmi-fru(8).  If
	      specified, will override the general option  k_g	above.	Prefix
	      with '0x'	to enter the key in hex.

       ipmi-fru-authentication-type AUTHENTICATION-TYPE
	      Specify  the default authentication type to use for ipmi-fru(8).
	      If specified, will override the general  option  authentication-
	      type  above.  The	 following authentication types	are supported:
	      NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       ipmi-fru-cipher-suite-id	CIPHER-SUITE-ID
	      Specify the default cipher suite id to use for ipmi-fru(8).   If
	      specified,  will	override  the  general	option cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       ipmi-fru-privilege-level	PRIVILEGE-LEVEL
	      Specify  the  default privilege type to use for ipmi-fru(8).  If
	      specified, will  override	 the  general  option  privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       ipmi-fru-workaround-flags WORKAROUNDS
	      Specify default workaround flags to  use	for  ipmi-fru(8).   If
	      specified,  will	override  the general options workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.   Please  see  ipmi-fru(8)	 manpage  for  available work-
	      arounds.

       ipmi-fru-verbose-count COUNT
	      Specify default verbose count to use for ipmi-fru(8).

       ipmi-fru-bridge-fru ENABLE|DISABLE
	      Specify if FRU entries on	other controllers should  be  read  by
	      default or not.

       ipmi-fru-interpret-oem-data ENABLE|DISABLE
	      Specify  if ipmi-fru should attempt to interpret OEM data	by de-
	      fault or not.

IPMI-OEM OPTIONS
       The following options are specific to ipmi-oem(8).  They	 will  be  ig-
       nored by	other tools.

       ipmi-oem-username USERNAME
	      Specify  the default username to use for ipmi-oem(8).  If	speci-
	      fied, will override the general option username above.

       ipmi-oem-password PASSWORD
	      Specify the default password to use for ipmi-oem(8).  If	speci-
	      fied, will override the general option password above.

       ipmi-oem-k_g str
	      Specify  the  default  BMC key (K_g) to use for ipmi-oem(8).  If
	      specified, will override the general option  k_g	above.	Prefix
	      with '0x'	to enter the key in hex.

       ipmi-oem-authentication-type AUTHENTICATION-TYPE
	      Specify  the default authentication type to use for ipmi-oem(8).
	      If specified, will override the general  option  authentication-
	      type  above.  The	 following authentication types	are supported:
	      NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       ipmi-oem-cipher-suite-id	CIPHER-SUITE-ID
	      Specify the default cipher suite id to use for ipmi-oem(8).   If
	      specified,  will	override  the  general	option cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       ipmi-oem-privilege-level	PRIVILEGE-LEVEL
	      Specify  the  default privilege type to use for ipmi-oem(8).  If
	      specified, will  override	 the  general  option  privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       ipmi-oem-workaround-flags WORKAROUNDS
	      Specify default workaround flags to  use	for  ipmi-oem(8).   If
	      specified,  will	override  the general options workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.   Please  see  ipmi-oem(8)	 manpage  for  available work-
	      arounds.

       ipmi-oem-verbose-count COUNT
	      Specify default verbose count to use for ipmi-oem(8).

IPMI-PET OPTIONS
       The following options are specific to ipmi-pet(8).  They	 will  be  ig-
       nored by	other tools.

       ipmi-pet-username USERNAME
	      Specify  the default username to use for ipmi-pet(8).  If	speci-
	      fied, will override the general option username above.

       ipmi-pet-password PASSWORD
	      Specify the default password to use for ipmi-pet(8).  If	speci-
	      fied, will override the general option password above.

       ipmi-pet-k_g str
	      Specify  the  default  BMC key (K_g) to use for ipmi-pet(8).  If
	      specified, will override the general option  k_g	above.	Prefix
	      with '0x'	to enter the key in hex.

       ipmi-pet-authentication-type AUTHENTICATION-TYPE
	      Specify  the default authentication type to use for ipmi-pet(8).
	      If specified, will override the general  option  authentication-
	      type  above.  The	 following authentication types	are supported:
	      NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       ipmi-pet-cipher-suite-id	CIPHER-SUITE-ID
	      Specify the default cipher suite id to use for ipmi-pet(8).   If
	      specified,  will	override  the  general	option cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       ipmi-pet-privilege-level	PRIVILEGE-LEVEL
	      Specify  the  default privilege type to use for ipmi-pet(8).  If
	      specified, will  override	 the  general  option  privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       ipmi-pet-workaround-flags WORKAROUNDS
	      Specify default workaround flags to  use	for  ipmi-pet(8).   If
	      specified,  will	override  the general options workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.   Please  see  ipmi-pet(8)	 manpage  for  available work-
	      arounds.

       ipmi-pet-verbose-count COUNT
	      Specify default verbose count to use for ipmi-pet(8).

       ipmi-pet-output-event-severity ENABLE|DISABLE
	      Specify if ipmi-pet should output	the event  severity  state  by
	      default.

       ipmi-pet-output-event-state ENABLE|DISABLE
	      Specify  if  ipmi-pet should output the event state state	by de-
	      fault.

       ipmi-pet-event-state-config-file	FILE
	      Specify the default event	state configuration file.

       ipmi-pet-interpret-oem-data ENABLE|DISABLE
	      Specify if ipmi-pet should attempt to interpret OEM data by  de-
	      fault or not.

       ipmi-pet-entity-sensor-names ENABLE|DISABLE
	      Specify  if output of sensor names should	include	entity ids and
	      instances	by default or not.

       ipmi-pet-no-sensor-type-output ENABLE|DISABLE
	      Specify if output	of the sensor type should be output by default
	      or not.

       ipmi-pet-comma-separated-output ENABLE|DISABLE
	      Specify if output	should be comma	separated by default or	not.

       ipmi-pet-no-header-output ENABLE|DISABLE
	      Specify if column	headers	should be output by default or not.

       ipmi-pet-non-abbreviated-units ENABLE|DISABLE
	      Specify  if  output  should have units abbreviated by default or
	      not.

IPMI-RAW OPTIONS
       The following options are specific to ipmi-raw(8).  They	 will  be  ig-
       nored by	other tools.

       ipmi-raw-username USERNAME
	      Specify  the default username to use for ipmi-raw(8).  If	speci-
	      fied, will override the general option username above.

       ipmi-raw-password PASSWORD
	      Specify the default password to use for ipmi-raw(8).  If	speci-
	      fied, will override the general option password above.

       ipmi-raw-k_g str
	      Specify  the  default  BMC key (K_g) to use for ipmi-raw(8).  If
	      specified, will override the general option  k_g	above.	Prefix
	      with '0x'	to enter the key in hex.

       ipmi-raw-authentication-type AUTHENTICATION-TYPE
	      Specify  the default authentication type to use for ipmi-raw(8).
	      If specified, will override the general  option  authentication-
	      type  above.  The	 following authentication types	are supported:
	      NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       ipmi-raw-cipher-suite-id	CIPHER-SUITE-ID
	      Specify the default cipher suite id to use for ipmi-raw(8).   If
	      specified,  will	override  the  general	option cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       ipmi-raw-privilege-level	PRIVILEGE-LEVEL
	      Specify  the  default privilege type to use for ipmi-raw(8).  If
	      specified, will  override	 the  general  option  privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       ipmi-raw-workaround-flags WORKAROUNDS
	      Specify default workaround flags to  use	for  ipmi-raw(8).   If
	      specified,  will	override  the general options workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.   Please  see  ipmi-raw(8)	 manpage  for  available work-
	      arounds.

IPMI-SEL OPTIONS
       The following options are specific to ipmi-sel(8).  They	 will  be  ig-
       nored by	other tools.

       ipmi-sel-username USERNAME
	      Specify  the default username to use for ipmi-sel(8).  If	speci-
	      fied, will override the general option username above.

       ipmi-sel-password PASSWORD
	      Specify the default password to use for ipmi-sel(8).  If	speci-
	      fied, will override the general option password above.

       ipmi-sel-k_g str
	      Specify  the  default  BMC key (K_g) to use for ipmi-sel(8).  If
	      specified, will override the general option  k_g	above.	Prefix
	      with '0x'	to enter the key in hex.

       ipmi-sel-authentication-type AUTHENTICATION-TYPE
	      Specify  the default authentication type to use for ipmi-sel(8).
	      If specified, will override the general  option  authentication-
	      type  above.  The	 following authentication types	are supported:
	      NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       ipmi-sel-cipher-suite-id	CIPHER-SUITE-ID
	      Specify the default cipher suite id to use for ipmi-sel(8).   If
	      specified,  will	override  the  general	option cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       ipmi-sel-privilege-level	PRIVILEGE-LEVEL
	      Specify  the  default privilege type to use for ipmi-sel(8).  If
	      specified, will  override	 the  general  option  privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       ipmi-sel-workaround-flags WORKAROUNDS
	      Specify default workaround flags to  use	for  ipmi-sel(8).   If
	      specified,  will	override  the general options workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.   Please  see  ipmi-sel(8)	 manpage  for  available work-
	      arounds.

       ipmi-sel-verbose-count COUNT
	      Specify default verbose count to use for ipmi-sel(8).

       ipmi-sel-types TYPE-LIST
	      Specify default types to show SEL	events for. Multiple types can
	      be  specified  separated by whitespace. Users may	specify	sensor
	      types by string or by number (decimal or hex). Please see	 ipmi-
	      sel(8) --list-types option to see	possible string	input types.

       ipmi-sel-exclude-types ENSOR-TYPES-LIST Specify
	      default sensor types to not show SEL events for. Multiple	sensor
	      types can	be specified separated by whitespace. Users may	 spec-
	      ify  sensor types	by string or by	number.	Please see ipmi-sel(8)
	      --list-types option to see possible string input types.

       ipmi-sel-system-event-only ENABLE|DISABLE
	      Specify if output	should only include system event records.

       ipmi-sel-oem-event-only ENABLE|DISABLE
	      Specify if output	should only include OEM	event records.

       ipmi-sel-output-manufacturer-id ENABLE|DISABLE
	      Specify if output	of OEM event records should  include  manufac-
	      turer ID by default or not.

       ipmi-sel-output-event-state ENABLE|DISABLE
	      Specify  if  ipmi-sel should output the event state state	by de-
	      fault.

       ipmi-sel-event-state-config-file	FILE
	      Specify the default event	state configuration file.

       ipmi-sel-interpret-oem-data ENABLE|DISABLE
	      Specify if ipmi-sel should attempt to interpret OEM data by  de-
	      fault or not.

       ipmi-sel-output-oem-event-strings ENABLE|DISABLE
	      Specify  if  ipmi-sel should output OEM event strings by default
	      or not.

       ipmi-sel-entity-sensor-names ENABLE|DISABLE
	      Specify if output	of sensor names	should include entity ids  and
	      instances	by default or not.

       ipmi-sel-no-sensor-type-output ENABLE|DISABLE
	      Specify if output	of the sensor type should be output by default
	      or not.

       ipmi-sel-comma-separated-output ENABLE|DISABLE
	      Specify if output	should be comma	separated by default or	not.

       ipmi-sel-no-header-output ENABLE|DISABLE
	      Specify if column	headers	should be output by default or not.

       ipmi-sel-non-abbreviated-units ENABLE|DISABLE
	      Specify if output	should have units abbreviated  by  default  or
	      not.

       ipmi-sel-legacy-output ENABLE|DISABLE
	      Specify if output	should be in legacy format by default or not.

IPMI-SENSORS OPTIONS
       The  following  options	are specific to	ipmi-sensors(8).  They will be
       ignored by other	tools.

       ipmi-sensors-username USERNAME
	      Specify the default username to  use  for	 ipmi-sensors(8).   If
	      specified, will override the general option username above.

       ipmi-sensors-password PASSWORD
	      Specify  the  default  password  to use for ipmi-sensors(8).  If
	      specified, will override the general option password above.

       ipmi-sensors-k_g	str
	      Specify the default BMC key (K_g)	to  use	 for  ipmi-sensors(8).
	      If specified, will override the general option k_g above.	Prefix
	      with '0x'	to enter the key in hex.

       ipmi-sensors-authentication-type	AUTHENTICATION-TYPE
	      Specify the default authentication type  to  use	for  ipmi-sen-
	      sors(8).	If specified, will override the	general	option authen-
	      tication-type above. The following authentication	types are sup-
	      ported: NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       ipmi-sensors-cipher-suite-id CIPHER-SUITE-ID
	      Specify  the default cipher suite	id to use for ipmi-sensors(8).
	      If specified, will override the general  option  cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       ipmi-sensors-privilege-level PRIVILEGE-LEVEL
	      Specify the default privilege type to use	 for  ipmi-sensors(8).
	      If  specified,  will override the	general	option privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       ipmi-sensors-workaround-flags WORKAROUNDS
	      Specify default workaround flags to use for ipmi-sensors(8).  If
	      specified, will override the  general  options  workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.  Please see ipmi-sensors(8) manpage for  available	 work-
	      arounds.

       ipmi-sensors-verbose-count COUNT
	      Specify default verbose count to use for ipmi-sensors(8).

       ipmi-sensors-quiet-readings ENABLE|DISABLE
	      Specify  if  sensor  reading values and thresholds should	not be
	      output by	default.

       ipmi-sensors-record-ids ECORD-IDS-LIST
	      Specify default record ids to show sensor	outputs	for.  Multiple
	      record ids can be	specified separated by whitespace.

       ipmi-sensors-exclude-record-ids ECORD-IDS-LIST
	      Specify  default record ids to not show sensor outputs for. Mul-
	      tiple record ids can be specified	separated by whitespace.

       ipmi-sensors-types TYPE-LIST
	      Specify default types to show sensor outputs for.	Multiple types
	      can be specified separated by whitespace.	Users may specify sen-
	      sor types	by string or by	number (decimal	or  hex).  Please  see
	      ipmi-sensors(8) --list-types option to see possible string input
	      types.

       ipmi-sensors-exclude-types ENSOR-TYPES-LIST Specify
	      default sensor types to not show sensor  outputs	for.  Multiple
	      sensor types can be specified separated by whitespace. Users may
	      specify sensor types by string or	by number.  Please  see	 ipmi-
	      sensors(8)  --list-types	option	to  see	 possible string input
	      types.

       ipmi-sensors-bridge-sensors ENABLE|DISABLE
	      Specify if non-BMC sensors should	be bridged by default or not.

       ipmi-sensors-shared-sensors ENABLE|DISABLE
	      Specify if shared	sensors	should be output by default or not.

       ipmi-sensors-interpret-oem-data ENABLE|DISABLE
	      Specify if ipmi-sensors should attempt to	interpret OEM data  by
	      default or not.

       ipmi-sensors-ignore-not-available-sensors ENABLE|DISABLE
	      Specify  if  ipmi-sensors	should ignore not-available (i.e. N/A)
	      sensors by default.

       ipmi-sensors-ignore-unrecognized-events ENABLE|DISABLE
	      Specify if ipmi-sensors should ignore unrecognized events	 (i.e.
	      'Unrecognized Event') in sensors output by default.

       ipmi-sensors-output-event-bitmask ENABLE|DISABLE
	      Specify  if ipmi-sensors should output event bitmasks instead of
	      string representations by	default.

       ipmi-sensors-output-sensor-state	ENABLE|DISABLE
	      Specify if ipmi-sensors should output the	sensor	state  by  de-
	      fault.

       ipmi-sensors-sensor-state-config-file FILE
	      Specify the default sensor state configuration file.

       ipmi-sensors-entity-sensor-names	ENABLE|DISABLE
	      Specify  if output of sensor names should	include	entity ids and
	      instances	by default or not.

       ipmi-sensors-output-sensor-thresholds ENABLE|DISABLE
	      Specify if ipmi-sensors should output sensor thresholds  by  de-
	      fault.

       ipmi-sensors-no-sensor-type-output ENABLE|DISABLE
	      Specify if output	of the sensor type should be output by default
	      or not.

       ipmi-sensors-comma-separated-output ENABLE|DISABLE
	      Specify if output	should be comma	separated by default or	not.

       ipmi-sensors-no-header-output ENABLE|DISABLE
	      Specify if column	headers	should be output by default or not.

       ipmi-sensors-non-abbreviated-units ENABLE|DISABLE
	      Specify if output	should have units abbreviated  by  default  or
	      not.

       ipmi-sensors-legacy-output ENABLE|DISABLE
	      Specify if output	should be in legacy format by default or not.

       ipmi-sensors-ipmimonitoring-legacy-output ENABLE|DISABLE
	      Specify  if  output should be in ipmimonitoring legacy format by
	      default or not.

IPMICONSOLE OPTIONS
       The following options are specific to ipmiconsole(8).  They will	be ig-
       nored by	other tools.

       ipmiconsole-username USERNAME
	      Specify  the  default  username  to  use for ipmiconsole(8).  If
	      specified, will override the general option username above.

       ipmiconsole-password PASSWORD
	      Specify the default password  to	use  for  ipmiconsole(8).   If
	      specified, will override the general option password above.

       ipmiconsole-k_g str
	      Specify the default BMC key (K_g)	to use for ipmiconsole(8).  If
	      specified, will override the general option  k_g	above.	Prefix
	      with '0x'	to enter the key in hex.

       ipmiconsole-authentication-type AUTHENTICATION-TYPE
	      Specify  the  default  authentication  type  to use for ipmicon-
	      sole(8).	If specified, will override the	general	option authen-
	      tication-type above. The following authentication	types are sup-
	      ported: NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       ipmiconsole-cipher-suite-id CIPHER-SUITE-ID
	      Specify the default cipher suite id to use  for  ipmiconsole(8).
	      If  specified,  will override the	general	option cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       ipmiconsole-privilege-level PRIVILEGE-LEVEL
	      Specify  the  default  privilege type to use for ipmiconsole(8).
	      If specified, will override the general  option  privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       ipmiconsole-workaround-flags WORKAROUNDS
	      Specify default workaround flags to use for ipmiconsole(8).   If
	      specified,  will	override  the general options workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.   Please  see  ipmiconsole(8) manpage for available work-
	      arounds.

       ipmiconsole-escape-char CHAR
	      Specify the default escape character.

       ipmiconsole-dont-steal ENABLE|DISABLE
	      Specify if in use	SOL sessions should not	be stolen by default.

       ipmiconsole-serial-keepalive ENABLE|DISABLE
	      Specify if serial	keepalive should be enabled by default.

       ipmiconsole-serial-keepalive-empty ENABLE|DISABLE
	      Specify if serial	keepalive empty	should be enabled by default.

       ipmiconsole-sol-payload-instance	NUM
	      Specify the default SOL payload instance.

       ipmiconsole-deactivate-all-instances ENABLE|DISABLE
	      Specify if SOL deactivate	should deactivate all instances	by de-
	      fault.

       ipmiconsole-lock-memory ENABLE|DISABLE
	      Specify if memory	should be locked by default.

IPMIPOWER OPTIONS
       The  following  options are specific to ipmipower(8).  They will	be ig-
       nored by	other tools.

       ipmipower-username USERNAME
	      Specify the default username to use for ipmipower(8).  If	speci-
	      fied, will override the general option username above.

       ipmipower-password PASSWORD
	      Specify the default password to use for ipmipower(8).  If	speci-
	      fied, will override the general option password above.

       ipmipower-k_g str
	      Specify the default BMC key (K_g)	to use for  ipmipower(8).   If
	      specified,  will	override  the general option k_g above.	Prefix
	      with '0x'	to enter the key in hex.

       ipmipower-authentication-type AUTHENTICATION-TYPE
	      Specify the default authentication type to use for ipmipower(8).
	      If  specified,  will override the	general	option authentication-
	      type above. The following	authentication	types  are  supported:
	      NONE, STRAIGHT_PASSWORD_KEY, MD2,	and MD5.

       ipmipower-cipher-suite-id CIPHER-SUITE-ID
	      Specify the default cipher suite id to use for ipmipower(8).  If
	      specified, will  override	 the  general  option  cipher-suite-id
	      above. The following cipher suite	ids are	supported: 0, 1, 2, 3,
	      6, 7, 8, 11, 12.

       ipmipower-privilege-level PRIVILEGE-LEVEL
	      Specify the default privilege type to use	for ipmipower(8).   If
	      specified,  will	override  the  general	option privilege-level
	      above. The following privilege levels are	supported: USER, OPER-
	      ATOR, ADMIN.

       ipmipower-workaround-flags WORKAROUNDS
	      Specify  default	workaround  flags to use for ipmipower(8).  If
	      specified, will override the  general  options  workaround-flags
	      above. Multiple workarounds can be specified separated by	white-
	      space.  Please see  ipmipower(8)	manpage	 for  available	 work-
	      arounds.

       ipmipower-on-if-off ENABLE|DISABLE
	      Specify if on-if-off functionality is enabled or disabled	by de-
	      fault.

       ipmipower-wait-until-on ENABLE|DISABLE
	      Specify if wait-until-on functionality is	enabled	or disabled by
	      default.

       ipmipower-wait-until-off	ENABLE|DISABLE
	      Specify  if  wait-until-off functionality	is enabled or disabled
	      by default.

       ipmipower-oem-power-type	OEM-POWER-TYPE
	      Specify OEM power	type to	be used.

       ipmipower-retransmission-wait-timeout MILLISECONDS
	      Specify the default retransmission wait timeout length to	use in
	      milliseconds.

       ipmipower-retransmission-backoff-count COUNT
	      Specify  the default retransmission backoff count	to use for re-
	      transmissions.

       ipmipower-ping-interval MILLISECONDS
	      Specify the default ping interval	length to use in milliseconds.

       ipmipower-ping-timeout MILLISECONDS
	      Specify the default ping timeout length to use in	milliseconds.

       ipmipower-ping-packet-count COUNT
	      Specify the default ping packet count size to use.

       ipmipower-ping-percent PERCENT
	      Specify the default ping percent value to	use.

       ipmipower-ping-consec-count COUNT
	      Specify the default ping consecutive count value to use.

FILES
       /usr/local/etc/freeipmi/freeipmi.conf.sample

REPORTING BUGS
       Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.

COPYRIGHT
       Copyright (C) 2003-2015 FreeIPMI	Core Team.

       FreeIPMI	is free	software; you can redistribute it and/or modify	it un-
       der  the	 terms	of  the	GNU General Public License as published	by the
       Free Software Foundation; either	version	3 of the License, or (at  your
       option) any later version.

SEE ALSO
       freeipmi(7),  bmc-device(8),  bmc-info(8),  bmc-watchdog(8), ipmi-chas-
       sis(8), ipmi-config(8), ipmi-fru(8),  ipmi-oem(8),  ipmi-raw(8),	 ipmi-
       sel(8), ipmi-sensors(8),	ipmiconsole(8),	ipmipower(8)

       http://www.gnu.org/software/freeipmi/

FreeIPMI 1.6.8			  2021-05-20			   FREEIPMI(5)

NAME | DESCRIPTION | FORMAT | GENERAL OPTIONS | SDR OPTIONS | TIME OPTIONS | HOSTRANGED OPTIONS | BMC-DEVICE OPTIONS | BMC-INFO OPTIONS | BMC-WATCHDOG OPTIONS | IPMI-CHASSIS OPTIONS | IPMI-CONFIG OPTIONS | IPMI-DCMI OPTIONS | IPMI-FRU OPTIONS | IPMI-OEM OPTIONS | IPMI-PET OPTIONS | IPMI-RAW OPTIONS | IPMI-SEL OPTIONS | IPMI-SENSORS OPTIONS | IPMICONSOLE OPTIONS | IPMIPOWER OPTIONS | FILES | REPORTING BUGS | COPYRIGHT | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=freeipmi.conf&sektion=5&manpath=FreeBSD+13.0-RELEASE+and+Ports>

home | help