Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
fmthard(1M)							   fmthard(1M)

NAME
       fmthard - populate label	on hard	disks

SYNOPSIS
   SPARC
       fmthard	-d data	 | -n volume_name | -s datafile	[-i] /dev/rdsk/c? [t?]
       d?s2

       fmthard -d data | -n volume_name	| -s datafile [-i]  /dev/rdsk/c?  [t?]
       d?s2

       The fmthard command updates the VTOC (Volume Table of Contents) on hard
       disks and, on  systems, adds boot information to	the Solaris fdisk par-
       tition.	 One  or  more of the options -s datafile, -d data, or -n vol-
       ume_name	must be	used to	request	modifications to the  disk  label.  To
       print  disk  label  contents, see prtvtoc(1M). The /dev/rdsk/c?[t?]d?s2
       file must be the	character special file of the device where the new la-
       bel is to be installed. On  systems, fdisk(1M) must be run on the drive
       before fmthard.

       If you are using	an  system, note that the term ``partition''  in  this
       page  refers to slices within the  fdisk	partition on  machines.	Do not
       confuse the partitions created by fmthard with the  partitions  created
       by fdisk.

       The following options are supported:

       -d data		       The  data  argument  of this option is a	string
			       representing the	information for	 a  particular
			       partition  in the current VTOC. The string must
			       be of the format	part:tag:flag:start:size where
			       part is the partition number, tag is the	ID TAG
			       of the partition, flag is the set of permission
			       flags,  start  is the starting sector number of
			       the partition, and size is the number  of  sec-
			       tors  in	 the partition.	See the	description of
			       the datafile  below  for	 more  information  on
			       these fields.

       -i		       This  option  allows  the command to create the
			       desired VTOC table, but prints the  information
			       to  standard  output  instead  of modifying the
			       VTOC on the disk.

       -n volume_name	       This option is used to give  the	 disk  a  vol-
			       ume_name	up to 8	characters long.

       -s datafile	       This  option  is	 used to populate the VTOC ac-
			       cording to a datafile created by	the  user.  If
			       the  datafile  is "-", fmthard reads from stan-
			       dard input. The datafile	 format	 is  described
			       below.  This option causes all of the disk par-
			       tition timestamp	fields to be set to zero.

			       Every VTOC generated by fmthard will also  have
			       partition 2, by convention, that	corresponds to
			       the whole disk. If the input in	datafile  does
			       not specify an entry for	partition 2, a default
			       partition 2 entry will be created automatically
			       in VTOC with the	tag V_BACKUP and size equal to
			       the full	size of	the disk.

			       The datafile contains  one  specification  line
			       for  each partition, starting with partition 0.
			       Each line is delimited by a new-line  character
			       (\n).  If  the  first character of a line is an
			       asterisk	(*), the line is treated as a comment.
			       Each line is composed of	entries	that are posi-
			       tion-dependent, separated by "white space"  and
			       having the following format:

			       partition tag flag starting_sector size_in_sec-
			       tors

			       where the entries have the following values:

			       partition       The  partition	number.	  Cur-
					       rently,	for  Solaris  SPARC, a
					       disk can	have up	 to  8	parti-
					       tions,  0-7.  Even  though  the
					       partition  field	 has  4	 bits,
					       only 3 bits are currently used.
					       For , all 4 bits	 are  used  to
					       allow slices 0-15. Each Solaris
					       fdisk partition can have	up  to
					       16 slices.

			       tag	       The  partition  tag:  a decimal
					       number. The following  are  re-
					       served codes: 0 (V_UNASSIGNED),
					       1  (V_BOOT),  2	 (V_ROOT),   3
					       (V_SWAP),    4	 (V_USR),    5
					       (V_BACKUP),  6	(V_STAND),   7
					       (V_VAR),	and 8 (V_HOME).

			       flag	       The  flag allows	a partition to
					       be flagged  as  unmountable  or
					       read  only,  the	 masks	being:
					       V_UNMNT 0x01, and V_RONLY 0x10.
					       For  mountable  partitions  use
					       0x00.

			       starting_sector The sector number (decimal)  on
					       which the partition starts.

			       size_in_sectors The number (decimal) of sectors
					       occupied	by the partition.

			       You can save the	output of a prtvtoc command to
			       a  file,	 edit  the  file,  and	use  it	as the
			       datafile	argument to the	-s option.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE	TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

       uname(1), format(1M), prtvtoc(1M), attributes(5)

    Only
       fdisk(1M), installgrub(1M)

       Special care should be exercised	when overwriting an existing VTOC,  as
       incorrect entries could result in current data being inaccessible. As a
       precaution, save	the old	VTOC.

       For disks under one terabyte, fmthard cannot write a VTOC on  an	 unla-
       beled disk. Use format(1M) for this purpose.

				  11 Apr 2005			   fmthard(1M)

NAME | SYNOPSIS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=fmthard&sektion=1m&manpath=SunOS+5.10>

home | help