Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
faxspool(1)		     mgetty+sendfax manual		   faxspool(1)

NAME
       faxspool	- queue	and convert files for faxing with sendfax(8)

SYNOPSIS
       faxspool	[options] phone-number files...

DESCRIPTION
       Queue  the named	files for later	transmission with sendfax(8).  The in-
       put files are converted to G3 fax files,	spooled	to /var/spool/fax/out-
       going/<dir>/f*.g3,  and	queued	for  transmsssion  to  the fax address
       "phone-number".

       On top of each page, faxspool puts a header  line,  telling  the	 other
       side the	number of pages, your fax id, ..., whatever you	like. The for-
       mat  of	 this	line   is   configurable   via	 the   file   /usr/lo-
       cal/etc/mgetty+sendfax/faxheader	 and per-user via the file $HOME/.fax-
       header.	(you can select	another	one with the "-h" option, for example,
       one for your business faxes and one for the private stuff).

       This  file  should contain a few	lines of text, normally	only one line,
       but more	than one line is permitted. The	text may use  the  tokens  @T@
       for the remote telephone	number,	@U@ for	the sending user name, @N@ for
       his full	name (fifth field of /etc/passwd, if not given with "-F"), @P@
       for  the	page number and	@M@ for	the total number of pages. @D@ will be
       replaced	by the string specified	with  the  "-D"	 option	 (see  below),
       @DATE@  will  be	 substituted  by the output of the `date` command, and
       @ID@ stands for the sender's fax	number (FAX_STATION_ID).  Finally, @S@
       will be substituted by the JOB ID (Fxxxxxx).

       If  "phone-number" contains non-numeric characters, faxspool interprets
       it as an	 alias	and  tries  to	look  it  up  in  the  files  /usr/lo-
       cal/etc/mgetty+sendfax/faxaliases  and $HOME/.faxnrs.  These files have
       a very simple format: one line per alias, alias name first,  whitespace
       (tab  or	 blank),  phone	 number. Optionally, you can place a short de-
       scription of the	receiver after the phone number, this will be used  as
       if  it  had  been  specified with "-D" (an explicit "-D"	flag overrides
       this).

       Example:	gert 0893244814	Gert Doering

       Access control is handled similar to the	way "crontab" does  it:	 if  a
       file  /usr/local/etc/mgetty+sendfax/fax.allow  exists, only those users
       listed in that file (one	name per line) may use the fax service.	If  it
       does  not  exist, but a file /usr/local/etc/mgetty+sendfax/fax.deny ex-
       ists, all users but those listed	in that	file may use faxspool(1),  and
       if  neither  file  exists, only root may	send faxes. (Note: if the user
       name in the fax.allow file is followed by a blank,  the	rest  of  that
       line  is	 ignored.  Some	other fax spooling software uses this to store
       additional information about the	user sending the request).

       Optionally, faxspool can	generate user-customizable fax cover pages. It
       is  quite  easy	to  set	 up:  if  a  file  /usr/local/lib/mgetty+send-
       fax/make.coverpg	exists and is executable, it is	run with all  relevant
       source/destination  data	on the command line, and its output is sent as
       the first page of the resulting	fax.  If  $HOME/.make.coverpg  exists,
       this file is used instead. See coverpg(1) for details.

OPTIONS
       -n     Tells  faxspool  to use normal resolution	(as opposed to the de-
	      fault, fine resolution) both when	converting files to G3	format
	      and when transmitting (no	effect on pbm files)

       -h <text	file>
	      Use  <text file> for the FAX header line(s).  The	default	format
	      file for	faxspool  is  /usr/local/etc/mgetty+sendfax/faxheader.
	      '-' means	'no header line'.

       -q     do  not output progress messages (file ... is format ...,	spool-
	      ing to ...).  Error messages will	be seen	anyway.

       -f <mail	address>
	      Use the address given for	the status mail	that faxrunq(1)	 sends
	      after completing / dequeueing the	request. If no mail address is
	      specified, the requesting	user (on the local machine)  gets  the
	      mail.

       -u <user	name>
	      Do  not  use the current user ID for authentication purposes but
	      the user name specified. Since this can lead to easy  breach  of
	      security,	 only  "trusted"  users	 may use this flag. Currently,
	      those users are "root", "lp" and "daemon"	 (hardwired  into  the
	      code).  Note:  the status	mail will still	go to the user running
	      faxspool(1) unless changed with "-f".

       -D <destination>
	      Verbose form of the fax's	destination. Used  only	 for  informa-
	      tional  purposes,	that is, faxq(1) will show it, faxrunq(1) will
	      put it into the return mail ("Subject: your fax to ..."),	and  a
	      @D@ in the page header will be replaced by it.

       -F <description>
	      Full  name  or  similar  description of the sending user (if not
	      specified, the full name field from /etc/passwd will  be	used).
	      Used  only for informational purposes, that is, faxspool(1) will
	      substitute a @N@ in the page header file with it,	and it will be
	      passed to	the cover page program (if used) as <sender-NAME>.

       -P <priority>
	      Sets  the	 priority of the fax in	the queue. 9 is	highest	(mean-
	      ing: faxes get sent out first), 1	is lowest. If nothing is spec-
	      ified,  a	 default  value	of 5 is	used. Right now, only faxrunqd
	      understands priority, faxrunq will silently ignore it.

       -C <cover page program>
	      Specify that the named program is	to be used to generate a cover
	      page for the fax that is being queued. How the program is	called
	      is described in the coverpg(1) manpage.

	      The special program name "-" is used to specify "no coverpage at
	      all".

	      No  message  is  issued if the program isn't found, or cannot be
	      executed,	faxspool will simply queue the fax without cover page.

	      The default cover	page program used is  $HOME/.make.coverpg;  if
	      this  file doesn't exist /usr/local/lib/mgetty+sendfax/make.cov-
	      erpg is used. (However, if $HOME/.make.coverpg  exists,  but  is
	      not executable, no coverpage is used at all.)

       -p     Spool  a	request	 that will try polling (see "sendfax -p"). The
	      implementation isn't too smart yet, the polled files will	simply
	      go into the job's	spool directory.

       -t <hh:mm>
	      Don't send the fax before	the time given.	It may not be sent ex-
	      actly at <hh:mm>,	but the	first time  faxrunq  runs  after  that
	      time. If the fax cannot be sent successfully before midnight, it
	      won't be sent on the next	day until <hh:mm>!

       -t <hh:mm>-<hh:mm>
	      Only send	the fax	in the time range  between  those  two	times.
	      This is only implemented in faxrunqd.  If	the second time	speci-
	      fied is 'earlier'	than the first time, it	is  interpreted	 as  a
	      time range crossing midnight.

       -A <data>
	      pass  faxspool  a	 chunk of data that is ignored (so you can put
	      anything you want	here),	but  written  to  all  the  log	 files
	      (acct.log,  sendfax.log).	 This can be used to tag faxes as pri-
	      vate/corporate, to tag faxes with	the customer  ID  to  use  for
	      billing, or something along that lines.

       -m <phone1> <phone2> <phone3> ... --
	      Multicasting  - send the specified files to all phone numbers in
	      the list given after "-m". The list  is  terminated  with	 "--".
	      "-m"  has	 to be the last	option on the command line (not	imple-
	      mented yet).

       -M <file	name>
	      Multicasting - read a list of telephone numbers to send the  fax
	      to from the given	file. Do not use in conjunction	with "-m" (not
	      implemented yet).

       -c     Copy source files	to a sub directory ".source-files/" in the fax
	      queue  directory	(most  likely,	you  won't  ever need this - I
	      needed it	for one	project, so it's here  and  documented.	 Don't
	      ask what it's good for).

FILES
       /var/spool/fax/outgoing/*
	      fax spool	directory

       /usr/local/etc/mgetty+sendfax/faxaliases
	      global fax alias file

       $HOME/.faxnrs
	      private fax alias	file

       /usr/local/etc/mgetty+sendfax/fax.allow
	      list of allowed users

       /usr/local/etc/mgetty+sendfax/fax.deny
	      list of denied users

       /usr/local/etc/mgetty+sendfax/faxheader
	      default fax page header

       /usr/local/lib/mgetty+sendfax/make.coverpg
	      program to create	fax cover page (see coverpg(1)).

       /usr/local/etc/mgetty+sendfax/faxspool.rules
	      program  to  control which file extentions are recognized	(.txt,
	      .ps, ...)	 and how those file formats should be converted	to G3.

       /usr/local/lib/mgetty+sendfax/faxq-helper
	      this a small C helper program that facilitates access to the fax
	      spool queue (which is since mgetty 1.1.29	no longer world-write-
	      able)

BUGS
       faxspool	is not too smart about recognizing file	types

       Use of faxspool -n with bitmap files may	give wrong results,  depending
       on the aspect ratio of the input	files.

       Multicasting with the -m	and -M options is not implemented yet.

SEE ALSO
       g3cat(1),  pbm2g3(1),  sendfax(8),  faxrunq(1),	faxrunqd(8),  faxq(1),
       faxqueue(5), coverpg(1)

AUTHOR
       faxspool	is  Copyright  (C)  1993-2002  by  Gert	 Doering,  <gert@gree-
       nie.muc.de>.   Access  control  and  alias  handling  suggested	by Caz
       Yokoyama, <caz@shoki.osk.psq.mei.co.jp>.

greenie				   23 Nov 02			   faxspool(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | FILES | BUGS | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=faxspool&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help