Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
FAIL(9)			 BSD Kernel Developer's	Manual		       FAIL(9)

NAME
     KFAIL_POINT_CODE, KFAIL_POINT_CODE_FLAGS, KFAIL_POINT_CODE_COND,
     KFAIL_POINT_RETURN, KFAIL_POINT_RETURN_VOID, KFAIL_POINT_ERROR,
     KFAIL_POINT_GOTO, KFAIL_POINT_SLEEP_CALLBACKS, fail_point,	DEBUG_FP --
     fail points

SYNOPSIS
     #include <sys/fail.h>

     KFAIL_POINT_CODE(parent, name, code);

     KFAIL_POINT_CODE_FLAGS(parent, name, flags, code);

     KFAIL_POINT_CODE_COND(parent, name, cond, flags, code);

     KFAIL_POINT_RETURN(parent,	name);

     KFAIL_POINT_RETURN_VOID(parent, name);

     KFAIL_POINT_ERROR(parent, name, error_var);

     KFAIL_POINT_GOTO(parent, name, error_var, label);

     KFAIL_POINT_SLEEP_CALLBACKS(parent, name, pre_func, pre_arg, post_func,
	 post_arg, code);

DESCRIPTION
     Fail points are used to add code points where errors may be injected in a
     user controlled fashion.  Fail points provide a convenient	wrapper	around
     user-provided error injection code, providing a sysctl(9) MIB, and	a
     parser for	that MIB that describes	how the	error injection	code should
     fire.

     The base fail point macro is KFAIL_POINT_CODE() where parent is a sysctl
     tree (frequently DEBUG_FP for kernel fail points, but various subsystems
     may wish to provide their own fail	point trees), and name is the name of
     the MIB in	that tree, and code is the error injection code.  The code ar-
     gument does not require braces, but it is considered good style to	use
     braces for	any multi-line code arguments.	Inside the code	argument, the
     evaluation	of RETURN_VALUE	is derived from	the return() value set in the
     sysctl MIB.

     Additionally, KFAIL_POINT_CODE_FLAGS() provides a flags argument which
     controls the fail point's behaviour.  This	can be used to e.g., mark the
     fail point's context as non-sleepable, which causes the sleep action to
     be	coerced	to a busy wait.	 The supported flags are:

	   FAIL_POINT_USE_TIMEOUT_PATH
	   Rather than sleeping	on a sleep() call, just	fire the post-sleep
	   function after a timeout fires.

	   FAIL_POINT_NONSLEEPABLE
	   Mark	the fail point as being	in a non-sleepable context, which co-
	   erces sleep() calls to delay() calls.

     Likewise, KFAIL_POINT_CODE_COND() supplies	a cond argument, which allows
     you to set	the condition under which the fail point's code	may fire.
     This is equivalent	to:

	     if	(cond)
		     KFAIL_POINT_CODE_FLAGS(...);

     See SYSCTL	VARIABLES below.

     The remaining KFAIL_POINT_*() macros are wrappers around common error in-
     jection paths:

     KFAIL_POINT_RETURN(parent,	name) is the equivalent	of
     KFAIL_POINT_CODE(..., return RETURN_VALUE)

     KFAIL_POINT_RETURN_VOID(parent, name) is the equivalent of
     KFAIL_POINT_CODE(..., return)

     KFAIL_POINT_ERROR(parent, name, error_var)	is the equivalent of
     KFAIL_POINT_CODE(..., error_var = RETURN_VALUE)

     KFAIL_POINT_GOTO(parent, name, error_var, label) is the equivalent	of
     KFAIL_POINT_CODE(..., { error_var = RETURN_VALUE; goto label;})

SYSCTL VARIABLES
     The KFAIL_POINT_*() macros	add sysctl MIBs	where specified.  Many base
     kernel MIBs can be	found in the debug.fail_point tree (referenced in code
     by	DEBUG_FP).

     The sysctl	variable may be	set in a number	of ways:

       [<pct>%][<cnt>*]<type>[(args...)][-><more terms>]

     The <type>	argument specifies which action	to take; it can	be one of:

     off     Take no action (does not trigger fail point code)

     return  Trigger fail point	code with specified argument

     sleep   Sleep the specified number	of milliseconds

     panic   Panic

     break   Break into	the debugger, or trap if there is no debugger support

     print   Print that	the fail point executed

     pause   Threads sleep at the fail point until the fail point is set to
	     off

     yield   Thread yields the cpu when	the fail point is evaluated

     delay   Similar to	sleep, but busy	waits the cpu.	(Useful	in non-sleep-
	     able contexts.)

     The <pct>%	and <cnt>* modifiers prior to <type> control when <type> is
     executed.	The <pct>% form	(e.g. "1.2%") can be used to specify a proba-
     bility that <type>	will execute.  This is a decimal in the	range (0, 100]
     which can specify up to 1/10,000% precision.  The <cnt>* form (e.g. "5*")
     can be used to specify the	number of times	<type> should be executed be-
     fore this <term> is disabled.  Only the last probability and the last
     count are used if multiple	are specified, i.e. "1.2%2%" is	the same as
     "2%".  When both a	probability and	a count	are specified, the probability
     is	evaluated before the count, i.e. "2%5*"	means "2% of the time, but
     only 5 times total".

     The operator -> can be used to express cascading terms.  If you specify
     <term1>-><term2>, it means	that if	<term1>	does not `execute', <term2> is
     evaluated.	 For the purpose of this operator, the return()	and print()
     operators are the only types that cascade.	 A return() term only cascades
     if	the code executes, and a print() term only cascades when passed	a non-
     zero argument.  A pid can optionally be specified.	 The fail point	term
     is	only executed when invoked by a	process	with a matching	p_pid.

EXAMPLES
     sysctl debug.fail_point.foobar="2.1%return(5)"
	     21/1000ths	of the time, execute code with RETURN_VALUE set	to 5.

     sysctl debug.fail_point.foobar="2%return(5)->5%return(22)"
	     2/100ths of the time, execute code	with RETURN_VALUE set to 5.
	     If	that does not happen, 5% of the	time execute code with RE-
	     TURN_VALUE	set to 22.

     sysctl debug.fail_point.foobar="5*return(5)->0.1%return(22)"
	     For 5 times, return 5.  After that, 1/1000th of the time, return
	     22.

     sysctl debug.fail_point.foobar="0.1%5*return(5)"
	     Return 5 for 1 in 1000 executions,	but only 5 times total.

     sysctl debug.fail_point.foobar="1%*sleep(50)"
	     1/100th of	the time, sleep	50ms.

     sysctl debug.fail_point.foobar="1*return(5)[pid 1234]"
	     Return 5 once, when pid 1234 executes the fail point.

AUTHORS
     This manual page was written by

     Matthew Bryan <matthew.bryan@isilon.com> and

     Zach Loafman <zml@FreeBSD.org>.

CAVEATS
     It	is easy	to shoot yourself in the foot by setting fail points too ag-
     gressively	or setting too many in combination.  For example, forcing
     malloc() to fail consistently is potentially harmful to uptime.

     The sleep() sysctl	setting	may not	be appropriate in all situations.
     Currently,	fail_point_eval() does not verify whether the context is ap-
     propriate for calling msleep().  You can force it to evaluate a sleep ac-
     tion as a delay action by specifying the FAIL_POINT_NONSLEEPABLE flag at
     the point the fail	point is declared.

BSD				March 15, 2016				   BSD

NAME | SYNOPSIS | DESCRIPTION | SYSCTL VARIABLES | EXAMPLES | AUTHORS | CAVEATS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=fail&sektion=9&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help