Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
ELINKS.CONF(5)		   ELinks configuration	file		ELINKS.CONF(5)

NAME
       elinks.conf - ELinks configuration file

SYNOPSIS
	   set	   <option> = <value>
	   unset   <option>
	   bind	   "<keymap>" "<key>" =	"<action>"
	   include "<file>"

DESCRIPTION
       The elinks.conf file contains configuration information for ELinks. It
       can be used to configure	the behaviour of ELinks	in a wide variety of
       ways: protocol behaviour, keybindings, colors used for rendering	and
       for the user interface.

       It is read at startup and saved only when requested. All	options
       described in this document can be fully configured from within ELinks
       so no editing of	elinks.conf is needed.

       Note that MIME-related options used for specifying handlers of various
       MIME types are NOT described in this document. Documentation for	these
       options can be found at the ELinks homepage. Keybindings	can also be
       specified in elinks.conf. This is described in elinkskeys(5).

SYNTAX
       The syntax of the configuration file is very simple. The	elinks.conf
       file is a free-form ASCII text file. The	file may contain extra tabs
       and newlines for	formatting purposes. Keywords in the file are
       case-sensitive. Comments	may be placed anywhere within the file (except
       within quotes). Comments	begin with the # character and end at the end
       of the line.

EXAMPLES
       Some sample settings:

	   # Use asynchronous DNS resolver?
	   set connection.async_dns = 1
	   # horizontal	text margin.
	   set document.browse.margin_width = 3
	   # Default document codepage.
	   set document.codepage.assume	= "ISO-8859-1"
	   # User defined protocol handlers
	   set protocol.user.mailto.unix = "mutt %h -s \"%s\""

OPTIONS
       bookmarks
	   Bookmark options.

       bookmarks.file_format <num> (default: 0)
	   File	format for bookmarks (affects both reading and saving):

	   o   0: is the default native	ELinks format

	   o   1: is XBEL universal XML	bookmarks format (NO NATIONAL CHARS
	       SUPPORT!)

       bookmarks.folder_state [0|1] (default: 1)
	   When	saving bookmarks also store whether folders are	expanded or
	   not,	so the look of the bookmark dialog is kept across ELinks
	   sessions. If	disabled all folders will appear unexpanded next time
	   ELinks is run.

       config
	   Configuration handling options.

       config.comments <num> (default: 3)
	   Amount of comments automatically written to the config file:

	   o   0: is no	comments are written

	   o   1: is only the "blurb" (name+type) is written

	   o   2: is only the description is written

	   o   3: is full comments are written

       config.indentation <num>	(default: 2)
	   Shift width of one indentation level	in the configuration file.
	   Zero	means that no indentation is performed at all when saving the
	   configuration.

       config.saving_style <num> (default: 3)
	   Determines what happens when	you tell ELinks	to save	options:

	   o   0: is only values of current options are	altered

	   o   1: is values of current options are altered and missing options
	       are added at the	end of the file

	   o   2: is the configuration file is rewritten from scratch

	   o   3: is values of current options are altered and missing options
	       CHANGED during this ELinks session are added at the end of the
	       file

       config.i18n [0|1] (default: 0)
	   If set to 1,	comments in the	configuration file will	be translated
	   to the language used	by UI. Note that if you	have different
	   language set	in different terminals,	the language used in the
	   configuration file MAY be the same as on the	terminal where you
	   saved the file, but it should be generally considered
	   unpredictable.

       config.saving_style_w [0|1] (default: 0)
	   This	is internal option used	when displaying	a warning about
	   obsolete config.saving_style. You shouldn't touch it.

       config.show_template [0|1] (default: 0)
	   Show	template options in autocreated	trees in the options manager
	   and save them to the	configuration file.

       connection
	   Connection options.

       connection.ssl
	   SSL options.

       connection.ssl.client_cert
	   X509	client certificate options.

       connection.ssl.client_cert.enable [0|1] (default: 0)
	   Enable or not the sending of	X509 client certificates to servers
	   which request them.

       connection.ssl.client_cert.file <str> (default: "")
	   The location	of a file containing the client	certificate and
	   unencrypted private key in PEM format. If unset, the	file pointed
	   to by the X509_CLIENT_CERT variable is used instead.

       connection.ssl.cert_verify [0|1]	(default: 0)
	   Verify the peer's SSL certificate. Note that	this needs extensive
	   configuration of OpenSSL by the user.

       connection.async_dns [0|1] (default: 1)
	   Whether to use asynchronous DNS resolving.

       connection.max_connections <num>	(default: 10)
	   Maximum number of concurrent	connections.

       connection.max_connections_to_host <num>	(default: 2)
	   Maximum number of concurrent	connections to a given host.

       connection.receive_timeout <num>	(default: 120)
	   Receive timeout (in seconds).

       connection.retries <num>	(default: 3)
	   Number of tries to establish	a connection. Zero means try forever.

       connection.try_ipv4 [0|1] (default: 1)
	   Whether to try to connect to	a host over IPv4. Note that if
	   connection.try_ipv6 is enabled too, it takes	precedence. And	better
	   do not touch	this at	all unless you are sure	what are you doing.
	   Note	that you can also force	a given	protocol to be used on a
	   per-connection basis	by using a URL in the style of e.g.
	   http4://elinks.cz/.

       connection.try_ipv6 [0|1] (default: 1)
	   Whether to try to connect to	a host over IPv6. Note that you	can
	   also	force a	given protocol to be used on a per-connection basis by
	   using a URL in the style of e.g. http6://elinks.cz/.

       connection.unrestartable_receive_timeout	<num> (default:	600)
	   Timeout for non-restartable connections (in seconds).

       cookies
	   Cookies options.

       cookies.accept_policy <num> (default: 2)
	   Cookies accepting policy:

	   o   0: is accept no cookies

	   o   1: is ask for confirmation before accepting cookie

	   o   2: is accept all	cookies

       cookies.max_age <num> (default: -1)
	   Cookie maximum age (in days):

	   o   -1: is use cookie's expiration date if any

	   o   0: is force expiration at the end of session, ignoring cookie's
	       expiration date

	   o   1: + is use cookie's expiration date, but limit age to the
	       given number of days

       cookies.paranoid_security [0|1] (default: 0)
	   When	enabled, we'll require three dots in cookies domain for	all
	   non-international domains (instead of just two dots). Some
	   countries have generic second level domains (eg. .com.pl, .co.uk)
	   and allowing	sites to set cookies for these generic domains could
	   potentially be very bad. Note, it is	off by default as it breaks a
	   lot of sites.

       cookies.save [0|1] (default: 1)
	   Whether cookies should be loaded from and saved to disk.

       cookies.resave [0|1] (default: 1)
	   Save	cookies	after each change in cookies list? No effect when
	   cookie saving (cookies.save)	is off.

       document
	   Document options.

       document.browse
	   Document browsing options (mainly interactivity).

       document.browse.accesskey
	   Options for handling	of link	access keys. An	HTML document can use
	   the ACCESSKEY attribute to assign an	access key to an element. When
	   an access key is pressed, the corresponding element will be given
	   focus.

       document.browse.accesskey.auto_follow [0|1] (default: 0)
	   Automatically follow	a link or submit a form	if appropriate
	   accesskey is	pressed	- this is the standard behaviour, but it's
	   considered dangerous.

       document.browse.accesskey.display [0|1] (default: 0)
	   Display access key in link info.

       document.browse.accesskey.priority <num>	(default: 0)
	   Priority of 'accesskey' HTML	attribute:

	   o   0: is first try all normal bindings; if it fails, check
	       accesskey

	   o   1: is first try only frame bindings; if it fails, check
	       accesskey

	   o   2: is first check accesskey (this can be	dangerous)

       document.browse.forms
	   Options for handling	of the forms interaction.

       document.browse.forms.auto_submit [0|1] (default: 1)
	   Automagically submit	a form when enter is pressed with a text field
	   selected.

       document.browse.forms.confirm_submit [0|1] (default: 1)
	   Ask for confirmation	when submitting	a form.

       document.browse.forms.input_size	<num> (default:	20)
	   Default form	input size if none is specified.

       document.browse.forms.insert_mode [0|1] (default: 1)
	   The setting for this	option affects how key presses are handled
	   when	one selects a text-input form-field. When enabled, one must
	   explicitly 'enter' a	selected text-field to edit it;	this prevents
	   text	fields from capturing key presses, such	as presses of a	scroll
	   key,	when it	is inadvertently selected. When	disabled, key presses
	   are always inserted into a selected text field.

       document.browse.forms.editor <str> (default: "")
	   Path	to the executable that ELinks should launch when the user
	   requests to edit a textarea with an external	editor.	If this	is
	   blank, ELinks will use the value of the environmental variable
	   $EDITOR. If $EDITOR is empty	or not set, ELinks will	then default
	   to "vi".

       document.browse.forms.show_formhist [0|1] (default: 0)
	   Ask if a login form should be saved to file or not. This option
	   only	disables the dialog, already saved login forms are unaffected.

       document.browse.images
	   Options for handling	of images.

       document.browse.images.display_style <num> (default: 2)
	   Display style for image tags	when displayed:

	   o   0: means	always display IMG

	   o   1: means	always display filename

	   o   2: means	display	alt/title attribute if possible, IMG if	not

	   o   3: means	display	alt/title attribute if possible, filename if
	       not

       document.browse.images.filename_maxlen <num> (default: 0)
	   Maximum length of image filename when displayed:

	   o   0: means	always display full filename

	   o   1-500: means display filename with this maximal length; if it
	       is longer, the middle is	substituted by an asterisk

       document.browse.images.image_link_tagging <num> (default: 1)
	   When	to enclose image links:

	   o   0: means	never

	   o   1: means	never if alt or	title are provided (old	behavior)

	   o   2: means	always

       document.browse.images.image_link_prefix	<str> (default:	"[")
	   Prefix string to use	to mark	image links.

       document.browse.images.image_link_suffix	<str> (default:	"]")
	   Suffix string to use	to mark	image links.

       document.browse.images.label_maxlen <num> (default: 0)
	   Maximum length of image label (alt/title):

	   o   0: means	always display full label

	   o   1-500: means display label with this maximal length; if it is
	       longer, the middle is substituted by an asterisk

       document.browse.images.show_as_links [0|1] (default: 0)
	   Display links to images without an alt attribute. If	this option is
	   off,	these images are completely invisible.

       document.browse.images.show_any_as_links	[0|1] (default:	1)
	   Display links to any	images in the document,	regardless of them
	   having an alt attribute or not. If this option is off, the alt
	   attribute contents is shown,	but as normal text, not	selectable as
	   a link.

       document.browse.links
	   Options for handling	of links to other documents.

       document.browse.links.active_link
	   Options for the active link.

       document.browse.links.active_link.colors
	   Active link colors.

       document.browse.links.active_link.colors.background <color|#rrggbb>
       (default: blue)
	   Default background color.

       document.browse.links.active_link.colors.text <color|#rrggbb> (default:
       black)
	   Default text	color.

       document.browse.links.active_link.enable_color [0|1] (default: 0)
	   Enable use of the active link background and	text color settings
	   instead of the link colors from the document.

       document.browse.links.active_link.bold [0|1] (default: 0)
	   Make	the active link	text bold.

       document.browse.links.active_link.invert	[0|1] (default:	1)
	   Invert the fore- and	background color so the	link stands out.

       document.browse.links.active_link.underline [0|1] (default: 0)
	   Underline the active	link.

       document.browse.links.color_dirs	[0|1] (default:	1)
	   Highlight links to directories in FTP and local directory listing.

       document.browse.links.numbering [0|1] (default: 0)
	   Display numbers next	to the links.

       document.browse.links.target_blank <num>	(default: 0)
	   Define how to handle	links having target=_blank set:

	   o   0: means	open link in current tab

	   o   1: means	open link in new tab in	foreground

	   o   2: means	open link in new tab in	background

	   o   3: means	open link in new window

       document.browse.links.use_tabindex [0|1]	(default: 1)
	   Whether to navigate links using tabindex specified ordering.	The
	   TABINDEX attribute in HTML elements specifies the order in which
	   links should	receive	focus when using the keyboard to navigate the
	   document.

       document.browse.links.missing_fragment [0|1] (default: 1)
	   Open	a message box when document has	no tag with given id.

       document.browse.links.number_keys_select_link <num> (default: 1)
	   Number keys select links rather than	specify	command	prefixes. This
	   is a	tristate:

	   o   0: means	never

	   o   1: means	if document.browse.links.numbering = 1

	   o   2: means	always

       document.browse.links.warn_malicious [0|1] (default: 1)
	   When	following a link the user ID part of the URI is	checked	and if
	   a maliciously crafted URI is	detected a warning dialog will ask
	   before following the	link.

       document.browse.links.wraparound	[0|1] (default:	0)
	   When	pressing 'down'	on the last link, jump to the first one, and
	   vice	versa.

       document.browse.scrolling
	   Scrolling options.

       document.browse.scrolling.horizontal_extended [0|1] (default: 1)
	   Whether to allow horizontal scrolling when the document does	not
	   extend off the screen. Useful for copy/paste	operations.

       document.browse.scrolling.horizontal_step <num> (default: 8)
	   Number of columns to	scroll when a key bound	to scroll-left or
	   scroll- right is pressed and	no prefix was given.

       document.browse.scrolling.margin	<num> (default:	3)
	   Size	of the virtual margin -	when you click inside of that margin,
	   document scrolls in that direction.

       document.browse.scrolling.vertical_step <num> (default: 2)
	   Number of lines to scroll when a key	bound to scroll-up or scroll-
	   down	is pressed and no prefix was given.

       document.browse.search
	   Options for searching.

       document.browse.search.case [0|1] (default: 0)
	   Whether the search should match the document	text while maintaining
	   case	sensitivity.

       document.browse.search.regex <num> (default: 0)
	   Enable searching with regular expressions:

	   o   0: for plain text searching

	   o   1: for basic regular expression searches

	   o   2: for extended regular expression searches

       document.browse.search.show_hit_top_bottom [0|1]	(default: 1)
	   Whether to show a dialog when the search hits the top or bottom of
	   the document.

       document.browse.search.wraparound [0|1] (default: 1)
	   Wrap	around when searching. Currently only used for typeahead.

       document.browse.search.show_not_found <num> (default: 2)
	   How to inform the user when nothing is matched:

	   o   0: means	do nothing

	   o   1: means	beep the terminal

	   o   2: means	pop up message box

       document.browse.search.typeahead	<num> (default:	0)
	   Start typeahead searching when an unbound key is pressed without
	   any modifiers. Note that most keys have default bindings, so	this
	   feature will	not be useful unless you unbind	them.

       when you	(when you press	a key bound to search-typeahead	or similar)
	   1 automatically starts typeahead searching thru link	text 2
	   automatically starts	typeahead searching thru all document text

       document.browse.margin_width <num> (default: 3)
	   Horizontal text margin.

       document.browse.refresh [0|1] (default: 1)
	   Automatically follow	document-specified refresh directives (_meta_
	   refresh tags). Web-page authors use these to	instruct the browser
	   to reload a document	at a given interval or to load another page.
	   Regardless of the value the refresh URI is accessible as a link.
	   Use the document.browse.minimum_refresh_time	to control the minimum
	   number of seconds a refresh will wait.

       document.browse.minimum_refresh_time <num> (default: 1000)
	   The minimum number of milliseconds that should pass before
	   refreshing. If set to zero the document refresh time	is used
	   unchanged. It can fix going back in history for some	sites that use
	   refreshing with zero	values.

       document.browse.table_move_order	[0|1] (default:	0)
	   Move	by columns in table, instead of	rows.

       document.cache
	   Cache options.

       document.cache.format
	   Format cache	options.

       document.cache.format.size <num>	(default: 5)
	   Number of cached formatted pages. Do	not get	too generous here,
	   'formatted' means that all the accompanying structures are kept in
	   memory so that you get the cached document immediatelly, but	these
	   structures may take a lot - 2x the size of the HTML source is
	   probably not	unusual, but it	can be even more if the	document
	   consists of a lot of	short lines (padded right, if possible)	and
	   links and not much other markup. So if you set this to 256 and then
	   you don't like your ELinks eating 90M, don't	come complaining to
	   us. ;-) Also	note that the format cache itself is not counted to
	   the memory cache size, but the HTML source of the formatted
	   documents is	always cached, even if it is over the memory cache
	   size	threshold. (Then of course no other documents can be cached.)

       document.cache.memory
	   Memory cache	options.

       document.cache.memory.size <num>	(default: 1048576)
	   Memory cache	size (in bytes).

       document.cache.cache_redirects [0|1] (default: 0)
	   Cache even redirects	sent by	server (usually	thru HTTP by a 302
	   HTTP	code and a Location header). This was the original behaviour
	   for quite some time,	but it causes problems in a situation very
	   common to various web login systems - frequently, when accessing a
	   certain location, they will redirect	you to a login page if they
	   don't receive an auth cookie, the login page	then gives you the
	   cookie and redirects	you back to the	original page, but there you
	   have	already	cached redirect	back to	the login page!	If this	option
	   has value of	0, this	malfunction is fixed, but occasionally you may
	   get superfluous (depends on how you take it ;-) requests to the
	   server. If this option has value of 1, experienced users can	still
	   workaround it by clever combination of usage	of reload, jumping
	   around in session history and hitting ctrl+enter. Note that this
	   option is checked when retrieving the information from cache, not
	   when	saving it to cache - thus if you enable	it, even previous
	   redirects will be taken from	cache instead of asking	the server.

       document.cache.ignore_cache_control [0|1] (default: 1)
	   Ignore Cache-Control	and Pragma server headers. When	set, the
	   document is cached even with	'Cache-Control:	no-cache'.

       document.codepage
	   Charset options.

       document.codepage.assume	<codepage> (default: System)
	   Default document codepage. 'System' stands for a codepage
	   determined by a selected locale.

       document.codepage.force_assumed [0|1] (default: 0)
	   Ignore charset info sent by server.

       document.colors
	   Default document color settings.

       document.colors.text <color|#rrggbb> (default: gray75)
	   Default text	color.

       document.colors.background <color|#rrggbb> (default: black)
	   Default background color.

       document.colors.link <color|#rrggbb> (default: blue)
	   Default link	color.

       document.colors.vlink <color|#rrggbb> (default: yellow)
	   Default visited link	color.

       document.colors.image <color|#rrggbb> (default: darkolivegreen)
	   Default image link color.

       document.colors.bookmark	<color|#rrggbb>	(default: hotpink)
	   Default bookmarked link color.

       document.colors.dirs <color|#rrggbb> (default: yellow)
	   Default directory color. See	document.browse.links.color_dirs
	   option.

       document.colors.increase_contrast [0|1] (default: 1)
	   Increase the	contrast between the foreground	and background colors
	   to ensure readability. For example it disallows dark	colors on a
	   black background. Note, this	is different from ensuring the
	   contrast with the ensure_contrast option.

       document.colors.ensure_contrast [0|1] (default: 1)
	   Makes sure that the back- and foreground colors are never equal.

       document.colors.use_document_colors <num> (default: 2)
	   Use colors specified	in document:

	   o   0: is use always	the default settings

	   o   1: is use document colors if available, except background

	   o   2: is use document colors, including background.	This can
	       mostly look very	impressive, but	some sites will	appear really
	       ugly. Note, that	obviously if the background is not black, it
	       will break the behaviour	of transparency.

       document.css
	   Options concerning how to use CSS for styling documents.

       document.css.enable [0|1] (default: 1)
	   Enable adding of CSS	style info to documents.

       document.css.import [0|1] (default: 1)
	   When	enabled	any external style sheets that are imported from
	   either CSS itself using the @import keyword or from the HTML	using
	   <link> tags in the document header will also	be downloaded.

       document.css.stylesheet <str> (default: "")
	   The path to the file	containing the default user defined Cascading
	   Style Sheet.	It can be used to control the basic layout of HTML
	   documents. The path is assumed to be	relative to ELinks' home
	   directory. Leave as "" to use built-in document styling.

       document.download
	   Options regarding files downloading and handling.

       document.download.directory <str> (default: "./")
	   Default download directory.

       document.download.set_original_time [0|1] (default: 0)
	   Set the timestamp of	each downloaded	file to	the timestamp stored
	   on the server.

       document.download.overwrite <num> (default: 2)
	   Prevent overwriting the local files:

	   o   0: is files will	silently be overwritten

	   o   1: is add a suffix .{number} (for example '.1') to the name

	   o   2: is ask the user

       document.download.notify_bell <num> (default: 0)
	   Audio notification when download is completed:

	   o   0: is never

	   o   1: is when background notification is active

	   o   2: is always

       document.dump
	   Dump	output options.

       document.dump.codepage <codepage> (default: System)
	   Codepage used in dump output. 'System' stands for a codepage
	   determined by a selected locale.

       document.dump.footer <str> (default: "")
	   Footer string used in dumps.	%u is substituted by URL.

       document.dump.header <str> (default: "")
	   Header string used in dumps.	%u is substituted by URL.

       document.dump.numbering [0|1] (default: 1)
	   Whether to print link numbers in dump output.

       document.dump.references	[0|1] (default:	1)
	   Whether to print references (URIs) of document links	in dump
	   output.

       document.dump.separator <str> (document.dump.separator <str> (default:
       "), document.dump.width <num> (default: 80)
	   Width of screen in characters when dumping documents.

       document.history
	   History options.

       document.history.global
	   Global history options.

       document.history.global.enable [0|1] (default: 1)
	   Enable global history ("history of all pages	visited").

       document.history.global.max_items <num> (default: 1024)
	   Maximum number of entries in	the global history.

       document.history.global.display_type <num> (default: 0)
	   What	to display in global history dialog:

	   o   0: is URLs

	   o   1: is page titles

       document.history.keep_unhistory [0|1] (default: 1)
	   Keep	unhistory ("forward history").

       document.html
	   Options concerning the display of HTML pages.

       document.html.display_frames [0|1] (default: 1)
	   Display frames.

       document.html.display_tables [0|1] (default: 1)
	   Display tables.

       document.html.display_subs [0|1]	(default: 1)
	   Display subscripts (as [thing]).

       document.html.display_sups [0|1]	(default: 1)
	   Display superscripts	(as ^thing).

       document.html.link_display <num>	(default: 2)
	   How to render <link>	tags from the HTML header:

	   o   0: is nothing

	   o   1: is title

	   o   2: is name in addition

	   o   3: is hreflang in addition

	   o   4: is type in addition

	   o   5: is everything

       document.html.underline_links [0|1] (default: 0)
	   Underline links.

       document.html.wrap_nbsp [0|1] (default: 0)
	   If set do not honour	non breaking space (the	nbsp entity) but allow
	   to wrap the text. This can help keeping the width of	documents down
	   so no horizontal scrolling is needed.

       document.plain
	   Options concerning the display of plain text	pages.

       document.plain.display_links [0|1] (default: 0)
	   Display URIs	in the document	as links.

       document.plain.compress_empty_lines [0|1] (default: 0)
	   Compress successive empty lines to only one in displayed text.

       document.uri_passing
	   Rules for passing URIs to external commands.	When one rule is
	   defined the link and	tab menu will have a menu item that makes it
	   possible to pass the	the link, frame	or tab URI to an external
	   command. If several rules are defined the link and tab menu will
	   have	a submenu of items for each rule. Note,	this is	mostly useful
	   for launching graphical viewers, since there	is no support for
	   releasing the terminal while	the command runs. The action and
	   submenus are	also available by binding keys to the
	   frame-external-command, the link-external-command, and the
	   tab-external-command	actions.

       document.uri_passing._template_ <str> (default: "")
	   A rule for passing URI to an	external command. The format is: %c in
	   the string means the	current	URL %% in the string means '%' Do
	   _not_ put single- or	double-quotes around %c.

       ecmascript
	   ECMAScript options.

       ecmascript.enable [0|1] (default: 1)
	   Whether to run those	scripts	inside of documents.

       ecmascript.error_reporting [0|1]	(default: 0)
	   Open	a message box when a script reports an error.

       ecmascript.ignore_noscript [0|1]	(default: 0)
	   Whether to ignore content enclosed by the <noscript>	tag when
	   ECMAScript is enabled.

       ecmascript.max_exec_time	<num> (default:	5)
	   Maximum execution time in seconds for a script.

       ecmascript.block_window_opening [0|1] (default: 0)
	   Whether to disallow scripts to open new windows or tabs.

       infofiles
	   Options for information files in ~/.elinks.

       infofiles.save_interval <num> (default: 300)
	   Interval at which to	trigger	information files in ~/.elinks to be
	   saved to disk if they have changed (seconds;	0 to disable)

       infofiles.secure_save [0|1] (default: 1)
	   First write data to unique temporary	file, then rename this file
	   upon	successfully finishing this. Note that this relates only to
	   config files, not downloaded	files. You may want to disable it if
	   you are using some exotic permissions for concerned files. Secure
	   file	saving is automagically	disabled if file is symlink. Warning:
	   some	systems	(ie. OS/2, Win32) require that destination file
	   doesn't exist when rename(3)	is called, breaking atomicity, and
	   reducing reliability	of this	feature.

       infofiles.secure_save_fsync [0|1] (default: 1)
	   When	using secure file saving, call fsync(3), if the	OS supports
	   it, to force	the OS immediately to write the	data to	permanent
	   storage. This is optional for those who wish	to avoid excessive
	   disk	I/O.

       mime
	   MIME-related	options	(handlers of various MIME types).

       mime.extension
	   Extension <-> MIME type association.

       mime.extension._template_ <str> (default: "")
	   MIME-type matching this file	extension ('*' is used here in place
	   of '.').

       mime.handler
	   A file type handler is a set	of information about how to use	an
	   external program to view a file. It is possible to refer to it for
	   several MIME	types -- e.g., you can define an 'image' handler to
	   which mime.type.image.png, mime.type.image.jpeg, and	so on will
	   refer; or one might define a	handler	for a more specific type of
	   file	-- e.g., PDF files. Note you must define both a	MIME handler
	   and a MIME type association for it to work.

       mime.handler._template_
	   Description of this handler.

       mime.handler._template_._template_
	   System-specific handler description (ie. unix, unix-xwin, ...).

       mime.handler._template_._template_.ask [0|1] (default: 1)
	   Ask before opening.

       mime.handler._template_._template_.block	[0|1] (default:	1)
	   Block the terminal when the handler is running.

       mime.handler._template_._template_.program <str>	(default: "")
	   External viewer for this file type. '%' in this string will be
	   substituted by a file name.

       mime.mailcap
	   Options for mailcap support.

       mime.mailcap.enable [0|1] (default: 1)
	   Enable mailcap support.

       mime.mailcap.path <str> (default:
       "~/.mailcap:/etc/mailcap:/usr/etc/mailcap:/usr/local/etc/mailcap:/usr/share/mailcap:/usr/share/misc/mailcap")
	   Mailcap search path.	Colon-separated	list of	files. Leave as	"" to
	   use MAILCAP environment variable instead.

       mime.mailcap.ask	[0|1] (default:	1)
	   Ask before using the	handlers defined by mailcap.

       mime.mailcap.description	<num> (default:	0)
	   Type	of description to show in "what	to do with this	file" query
	   dialog:

	   o   0: is show "mailcap"

	   o   1: is show program to be	run

	   o   2: is show mailcap description field if any; "mailcap"
	       otherwise

       mime.mailcap.prioritize [0|1] (default: 1)
	   Prioritize entries by the order of the files	in the mailcap path.
	   This	means that wildcard entries (like: image/*) will also be
	   checked before deciding the handler.

       mime.mimetypes
	   Options for the support of mime.types files.	These files can	be
	   used	to find	the content type of a URL by looking at	the extension
	   of the file name.

       mime.mimetypes.enable [0|1] (default: 1)
	   Enable mime.types support.

       mime.mimetypes.path <str> (default:
       "~/.mime.types:/etc/mime.types:/usr/etc/mime.types:/usr/local/etc/mime.types:/usr/share/mime.types:/usr/share/misc/mime.types")
	   The search path for mime.types files. Colon-separated list of
	   files.

       mime.type
	   Handler <-> MIME type association. The first	sub-tree is the	MIME
	   class while the second sub-tree is the MIME type (ie. image/gif
	   handler will	reside at mime.type.image.gif).	Each MIME type option
	   should contain (case-sensitive) name	of the MIME handler (its
	   properties are stored at mime.handler.<name>).

       mime.type._template_
	   Handler matching this MIME-type class ('*' is used here in place of
	   '.').

       mime.type._template_._template_ <str> (default: "")
	   Handler matching this MIME-type name	('*' is	used here in place of
	   '.').

       mime.default_type <str> (default: "application/octet-stream")
	   Document MIME-type to assume	by default (when we are	unable to
	   guess it properly from known	information about the document).

       protocol
	   Protocol specific options.

       protocol.bittorrent
	   BitTorrent specific options.

       protocol.bittorrent.ports
	   Port	range allowed to be used for listening on.

       protocol.bittorrent.ports.min <num> (default: 6881)
	   The minimum port to try and listen on.

       protocol.bittorrent.ports.max <num> (default: 6999)
	   The maximum port to try and listen on.

       protocol.bittorrent.tracker
	   Tracker options.

       protocol.bittorrent.tracker.compact [0|1] (default: 0)
	   Whether to request that the tracker returns peer info in compact
	   format. Note, the compact format only supports IPv4 addresses.

       protocol.bittorrent.tracker.interval <num> (default: 0)
	   The number of seconds to wait between periodically contacting the
	   tracker for announcing progress and requesting more peers. Set to
	   zero	to use the interval requested by the tracker.

       protocol.bittorrent.tracker.ip_address <str> (default: "")
	   What	IP address to report to	the tracker. If	set to "" no IP
	   address will	be sent	and the	tracker	will automatically determine
	   an appropriate IP address.

       protocol.bittorrent.tracker.key <str> (default: "")
	   An additional identification	that is	not shared with	any users. It
	   is intended to allow	a client to prove their	identity should	their
	   IP address change. It is an optional	parameter, but some trackers
	   require this	parameter. If set to ""	no user	key will be sent to
	   the tracker.

       protocol.bittorrent.tracker.numwant <num> (default: 50)
	   The maximum number of peers to request from the tracker. Set	to 0
	   to use the server default.

       protocol.bittorrent.tracker.min_skip_size <num> (default: 20)
	   The minimum number of peers to have in the current peer info	pool
	   before skipping requesting of more peers. I.e. setting numwant to
	   zero. Set to	0 to not have any limit.

       protocol.bittorrent.peerwire
	   Lowlevel peer-wire options.

       protocol.bittorrent.peerwire.connections	<num> (default:	55)
	   The maximum number of allowed connections to	both active and
	   non-active peers. By	increasing the number of allowed connections,
	   the chance of finding good peers to download	from is	increased.
	   However, too	many connections can lead to TCP congestion. If	the
	   maximum is reached all new incoming connections will	be closed.

       protocol.bittorrent.peerwire.max_message_length <num> (default:
       8388608)
	   The maximum length of messages to accept over the wire. Larger
	   values will cause the connection to be dropped.

       protocol.bittorrent.peerwire.max_request_length <num> (default:
       8388608)
	   The maximum length to allow for incoming requests. Larger requests
	   will	cause the connection to	be dropped.

       protocol.bittorrent.peerwire.request_length <num> (default: 16384)
	   How many bytes to query for per request. This is complementary to
	   the max_request_length option. If the configured length is bigger
	   than	the piece length it will be truncated.

       protocol.bittorrent.peerwire.timeout <num> (default: 300)
	   The number of seconds to wait before	closing	a socket on which
	   nothing has been received or	sent.

       protocol.bittorrent.peerwire.pool_size <num> (default: 55)
	   Maximum number of items in the peer pool. The peer pool contains
	   information used for	establishing connections to new	peers. Set to
	   0 to	have unlimited size.

       protocol.bittorrent.piece_cache_size <num> (default: 1048576)
	   The maximum amount of memory	used to	hold recently downloaded
	   pieces. Set to 0 to have unlimited size.

       protocol.bittorrent.max_uploads <num> (default: 7)
	   The maximum number of uploads to allow at once.

       protocol.bittorrent.min_uploads <num> (default: 2)
	   The minimum number of uploads which should at least be used for new
	   connections.

       protocol.bittorrent.request_queue_size <num> (default: 5)
	   How many piece requests to continuously keep	in queue. Pipelining
	   of requests is essential to saturate	connections and	get a good
	   connection performance and thus a faster download. However, a very
	   big queue size can lead to wasting bandwidth	near the end of	the
	   connection since remaining piece blocks will	be requested from
	   multiple peers.

       protocol.bittorrent.choke_interval <num>	(default: 10)
	   The number of seconds between updating the connection state and
	   most	importantly choke and unchoke peer connections.	The choke
	   period should be big	enough for newly unchoked connections to get
	   started but small enough to not allow freeriders too	much room for
	   stealing bandwidth.

       protocol.bittorrent.rarest_first_cutoff <num> (default: 4)
	   The number of pieces	to obtain before switching piece selection
	   strategy from random	to rarest first.

       protocol.bittorrent.allow_blacklist [0|1] (default: 1)
	   Allow blacklisting of buggy peers.

       protocol.file
	   Options specific to local browsing.

       protocol.file.cgi
	   Local CGI specific options.

       protocol.file.cgi.path <str> (default: "")
	   Colon separated list	of directories,	where CGI scripts are stored.

       protocol.file.cgi.policy	[0|1] (default:	0)
	   Whether to execute local CGI	scripts.

       protocol.file.allow_special_files [0|1] (default: 0)
	   Whether to allow reading from non-regular files. Note this can be
	   dangerous; reading /dev/urandom or /dev/zero	can ruin your day!

       protocol.file.show_hidden_files [0|1] (default: 1)
	   When	set to false, files with name starting with a dot will be
	   hidden in local directory listings.

       protocol.file.try_encoding_extensions [0|1] (default: 1)
	   When	set, if	we can't open a	file named 'filename', we'll try to
	   open	'filename' with	some encoding extension	appended (ie.
	   'filename.gz'); it depends on the supported encodings.

       protocol.fsp
	   FSP specific	options.

       protocol.fsp.sort [0|1] (default: 1)
	   Whether to sort entries in directory	listings.

       protocol.ftp
	   FTP specific	options.

       protocol.ftp.proxy
	   FTP proxy configuration.

       protocol.ftp.proxy.host <str> (default: "")
	   Host	and port-number	(host:port) of the FTP proxy, or blank.	If
	   it's	blank, FTP_PROXY environment variable is checked as well.

       protocol.ftp.anon_passwd	<str> (default:	"some@host.domain")
	   FTP anonymous password to be	sent.

       protocol.ftp.use_pasv [0|1] (default: 1)
	   Use PASV instead of PORT (passive vs	active mode, IPv4 only).

       protocol.ftp.use_epsv [0|1] (default: 0)
	   Use EPSV instead of EPRT (passive vs	active mode, IPv6 only).

       protocol.http
	   HTTP-specific options.

       protocol.http.bugs
	   Server-side HTTP bugs workarounds.

       protocol.http.bugs.accept_charset [0|1] (default: 1)
	   The Accept-Charset header is	quite long and sending it can trigger
	   bugs	in some	rarely found servers.

       protocol.http.bugs.allow_blacklist [0|1]	(default: 1)
	   Allow blacklisting of buggy servers.

       protocol.http.bugs.broken_302_redirect [0|1] (default: 1)
	   Broken 302 redirect (violates RFC but compatible with Netscape).
	   This	is a problem for a lot of web discussion boards	and the	like.
	   If they will	do strange things to you, try to play with this.

       protocol.http.bugs.post_no_keepalive [0|1] (default: 0)
	   Disable keepalive connection	after POST request.

       protocol.http.bugs.http10 [0|1] (default: 0)
	   Use HTTP/1.0	protocol instead of HTTP/1.1.

       protocol.http.proxy
	   HTTP	proxy configuration.

       protocol.http.proxy.host	<str> (default:	"")
	   Host	and port-number	(host:port) of the HTTP	proxy, or blank. If
	   it's	blank, HTTP_PROXY environment variable is checked as well.

       protocol.http.proxy.user	<str> (default:	"")
	   Proxy authentication	username.

       protocol.http.proxy.passwd <str>	(default: "")
	   Proxy authentication	password.

       protocol.http.referer
	   HTTP	referer	sending	options. HTTP referer is a special header sent
	   in the HTTP requests, which is supposed to contain the previous
	   page	visited	by the browser.	This way, the server can know what
	   link	did you	follow when accessing that page. However, this
	   behaviour can unfortunately considerably affect privacy and can
	   lead	even to	a security problem on some badly designed web pages.

       protocol.http.referer.policy <num> (default: 3)
	   Mode	of sending HTTP	referer:

	   o   0: is send no referer

	   o   1: is send current URL as referer

	   o   2: is send fixed	fake referer

	   o   3: is send previous URL as referer (correct, but	insecure)

       protocol.http.referer.fake <str>	(default: "")
	   Fake	referer	to be sent when	policy is 2.

       protocol.http.accept_language <str> (default: "")
	   Send	Accept-Language	header.

       protocol.http.accept_ui_language	[0|1] (default:	1)
	   Request localised versions of documents from	web-servers (using the
	   Accept-Language header) using the language you have configured for
	   ELinks' user-interface (this	also affects navigator.language
	   ECMAScript value available to scripts). Note	that some see this as
	   a potential security	risk because it	tells web-masters and the FBI
	   sniffers about your language	preference.

       protocol.http.trace [0|1] (default: 0)
	   If active, all HTTP requests	are sent with TRACE as their method
	   rather than GET or POST. This is useful for debugging of both
	   ELinks and various server-side scripts --- the server only returns
	   the client's	request	back to	the client verbatim. Note that this
	   type	of request may not be enabled on all servers.

       protocol.http.user_agent	<str> (default:	"ELinks/%v (textmode; %s;
       %t-%b)")
	   Change the User Agent ID. That means	identification string, which
	   is sent to HTTP server when a document is requested.	The 'textmode'
	   token in the	first field is our silent attempt to establish this as
	   a standard for new textmode user agents, so that the	webmasters can
	   have	just a single uniform test for these if	they are e.g. pushing
	   some	lite version to	them automagically. Use	" " if you don't want
	   any User-Agent header to be sent at all. %v in the string means
	   ELinks version, %s in the string means system identification, %t in
	   the string means size of the	terminal, %b in	the string means
	   number of bars displayed by ELinks.

       protocol.https
	   HTTPS-specific options.

       protocol.https.proxy
	   HTTPS proxy configuration.

       protocol.https.proxy.host <str> (default: "")
	   Host	and port-number	(host:port) of the HTTPS CONNECT proxy,	or
	   blank. If it's blank, HTTPS_PROXY environment variable is checked
	   as well.

       protocol.nntp
	   NNTP	and news specific options.

       protocol.nntp.server <str> (default: "")
	   Used	when resolving news: URIs. If set to the empty string the
	   value of the	NNTPSERVER environment variable	will be	used.

       protocol.nntp.header_entries <str> (default:
       "Subject,From,Date,Message-ID,Newsgroups")
	   Comma separated list	of which entries in the	article	header to
	   show. E.g. 'Subject'	and From. All header entries can be read in
	   the header info dialog.

       protocol.rewrite
	   Rules for rewriting URIs entered in the goto	dialog.	It makes it
	   possible to define a	set of prefixes	that will be expanded if they
	   match a string entered in the goto dialog. The prefixes can be
	   dumb, meaning that they work	only like URI abbreviations, or	smart
	   ones, making	it possible to pass arguments to them like search
	   engine keywords.

       protocol.rewrite.dumb
	   Dumb	prefixes, see enable-dumb description for details.

       protocol.rewrite.dumb._template_	<str> (default:	"")
	   Replacement URI for this dumbprefix:	%c in the string means the
	   current URL %% in the string	means '%'

       protocol.rewrite.smart
	   Smart prefixes, see enable-smart description	for details.

       protocol.rewrite.smart._template_ <str> (default: "")
	   Replacement URI for this smartprefix: %c in the string means	the
	   current URL %s in the string	means the whole	argument to
	   smartprefix %0,%1,...,%9 means argument 0, 1, ..., 9	%% in the
	   string means	'%'

       protocol.rewrite.default_template <str> (default: "")
	   Default URI template	used when the string entered in	the goto
	   dialog does not appear to be	a URI or a filename (i.e. contains no
	   '.',	: or / characters), and	does not match any defined prefixes.
	   Set the value to "" to disable use of the default template rewrite
	   rule. %c in the template means the current URL, %s in the template
	   means the whole string from the goto	dialog,	%0,%1,...,%9 mean the
	   1st,2nd,...,10th space-delimited part of %s,	%% in the template
	   means '%'.

       protocol.rewrite.enable-dumb [0|1] (default: 1)
	   Enable dumb prefixes	- simple URI abbreviations which can be
	   written to the Goto URL dialog instead of actual URIs - i.e.	if you
	   write 'elinks' there, you are directed to http://elinks.cz/.

       protocol.rewrite.enable-smart [0|1] (default: 1)
	   Enable smart	prefixes - URI templates triggered by writing given
	   abbreviation	to the Goto URL	dialog followed	by a list of arguments
	   from	which the actual URI is	composed - i.e.	'gg:search keywords'
	   or gn search	keywords for news.

       protocol.user
	   User	protocols. Options in this tree	specify	external handlers for
	   the appropriate protocols. Ie. protocol.user.mailto.unix.

       protocol.user._template_
	   Handler (external program) for this protocol. Name the options in
	   this	tree after your	system (ie. unix, unix-xwin).

       protocol.user._template_._template_ <str> (default: "")
	   Handler (external program) for this protocol	and system. %f in the
	   string means	file name to include form data from %h in the string
	   means hostname (or email address) %p	in the string means port %d in
	   the string means path (everything after the port) %s	in the string
	   means subject (?subject=<this>) %u in the string means the whole
	   URL

       protocol.no_proxy <str> (default: "")
	   Comma separated list	of domains for which the proxy (HTTP/FTP)
	   should be disabled. Optionally, a port can be specified for some
	   domains as well. If it's blank, NO_PROXY environment	variable is
	   checked as well.

       terminal
	   Terminal options.

       terminal._template_
	   Options specific to this terminal type (according to	$TERM value).

       terminal._template_.type	<num> (default:	0)
	   Terminal type; matters mostly only when drawing frames and dialog
	   box borders:

	   o   0: is dumb terminal type, ASCII art

	   o   1: is VT100, simple but portable

	   o   2: is Linux, you	get double frames and other goodies

	   o   3: is KOI-8

	   o   4: is FreeBSD

       terminal._template_.m11_hack [0|1] (default: 0)
	   Switch fonts	when drawing lines, enabling both local	characters and
	   lines working at the	same time. Makes sense only with linux
	   terminal.

       terminal._template_.utf_8_io [0|1] (default: 0)
	   Enable I/O in UTF8 for Unicode terminals. Note that currently, only
	   the subset of UTF8 according	to terminal codepage is	used.

       terminal._template_.restrict_852	[0|1] (default:	0)
	   Restrict the	characters used	when drawing lines. Makes sense	only
	   with	linux terminals	using the cp850/852 character sets.

       terminal._template_.block_cursor	[0|1] (default:	0)
	   Move	cursor to bottom right corner when done	drawing. This is
	   particularly	useful when we have a block cursor, so that inversed
	   text	is displayed correctly.

       terminal._template_.colors <num>	(default: 0)
	   The color mode controls what	colors are used	and how	they are
	   output to the terminal. The color modes are:

	   o   0: is mono mode,	only 2 colors are used

	   o   1: is 16	color mode, uses the common ANSI colors

	   o   2: is 256 color mode, uses XTerm	RGB codes

       terminal._template_.transparency	[0|1] (default:	1)
	   If we should	not set	the background to black. This is particularly
	   useful when we have a terminal (typically in	some windowing
	   environment)	with a background image	or a transparent background -
	   it will be visible in ELinks	as well. Note that this	option makes
	   sense only when colors are enabled.

       terminal._template_.underline [0|1] (default: 0)
	   If we should	use underline or enhance the color instead.

       terminal._template_.charset <codepage> (default:	System)
	   Codepage of charset used for	displaying content on terminal.
	   'System' stands for a codepage determined by	a selected locale.

       ui
	   User	interface options.

       ui.clock
	   Digital clock in the	status bar.

       ui.clock.enable [0|1] (default: 0)
	   Whether to display a	digital	clock in the status bar.

       ui.clock.format <str> (default: "[%H:%M]")
	   Format string for the digital clock.	See the	strftime(3) manpage
	   for details.

       ui.colors
	   Default user	interface color	settings.

       ui.colors.color
	   Color settings for color terminal.

       ui.colors.color.mainmenu
	   Main	menu bar colors.

       ui.colors.color.mainmenu.normal
	   Unselected main menu	bar item colors.

       ui.colors.color.mainmenu.normal.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.color.mainmenu.normal.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.mainmenu.selected
	   Selected main menu bar item colors.

       ui.colors.color.mainmenu.selected.text <color|#rrggbb> (default:	green)
	   Default text	color.

       ui.colors.color.mainmenu.selected.background <color|#rrggbb> (default:
       black)
	   Default background color.

       ui.colors.color.mainmenu.hotkey
	   Main	menu hotkey colors.

       ui.colors.color.mainmenu.hotkey.normal
	   Main	menu unselected	hotkey colors.

       ui.colors.color.mainmenu.hotkey.normal.text <color|#rrggbb> (default:
       darkred)
	   Default text	color.

       ui.colors.color.mainmenu.hotkey.normal.background <color|#rrggbb>
       (default: white)
	   Default background color.

       ui.colors.color.mainmenu.hotkey.selected
	   Main	menu selected hotkey colors.

       ui.colors.color.mainmenu.hotkey.selected.text <color|#rrggbb> (default:
       darkred)
	   Default text	color.

       ui.colors.color.mainmenu.hotkey.selected.background <color|#rrggbb>
       (default: green)
	   Default background color.

       ui.colors.color.menu
	   Menu	bar colors.

       ui.colors.color.menu.normal
	   Unselected menu item	colors.

       ui.colors.color.menu.normal.text	<color|#rrggbb>	(default: black)
	   Default text	color.

       ui.colors.color.menu.normal.background <color|#rrggbb> (default:	white)
	   Default background color.

       ui.colors.color.menu.selected
	   Selected menu item colors.

       ui.colors.color.menu.selected.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.color.menu.selected.background	<color|#rrggbb>	(default:
       green)
	   Default background color.

       ui.colors.color.menu.marked
	   Marked menu item colors.

       ui.colors.color.menu.marked.text	<color|#rrggbb>	(default: red)
	   Default text	color.

       ui.colors.color.menu.marked.background <color|#rrggbb> (default:	white)
	   Default background color.

       ui.colors.color.menu.hotkey
	   Menu	item hotkey colors.

       ui.colors.color.menu.hotkey.normal
	   Menu	item unselected	hotkey colors.

       ui.colors.color.menu.hotkey.normal.text <color|#rrggbb> (default:
       darkred)
	   Default text	color.

       ui.colors.color.menu.hotkey.normal.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.menu.hotkey.selected
	   Menu	item selected hotkey colors.

       ui.colors.color.menu.hotkey.selected.text <color|#rrggbb> (default:
       darkred)
	   Default text	color.

       ui.colors.color.menu.hotkey.selected.background <color|#rrggbb>
       (default: green)
	   Default background color.

       ui.colors.color.menu.frame
	   Menu	frame colors.

       ui.colors.color.menu.frame.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.color.menu.frame.background <color|#rrggbb> (default: white)
	   Default background color.

       ui.colors.color.dialog
	   Dialog colors.

       ui.colors.color.dialog.generic
	   Generic dialog colors.

       ui.colors.color.dialog.generic.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.color.dialog.generic.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.dialog.frame
	   Dialog frame	colors.

       ui.colors.color.dialog.frame.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.color.dialog.frame.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.dialog.scrollbar
	   Scrollbar colors.

       ui.colors.color.dialog.scrollbar.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.color.dialog.scrollbar.background <color|#rrggbb> (default:
       blue)
	   Default background color.

       ui.colors.color.dialog.scrollbar-selected
	   Scrollbar selected colors.

       ui.colors.color.dialog.scrollbar-selected.text <color|#rrggbb>
       (default: black)
	   Default text	color.

       ui.colors.color.dialog.scrollbar-selected.background <color|#rrggbb>
       (default: green)
	   Default background color.

       ui.colors.color.dialog.title
	   Dialog title	colors.

       ui.colors.color.dialog.title.text <color|#rrggbb> (default: darkred)
	   Default text	color.

       ui.colors.color.dialog.title.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.dialog.text
	   Dialog text colors.

       ui.colors.color.dialog.text.text	<color|#rrggbb>	(default: black)
	   Default text	color.

       ui.colors.color.dialog.text.background <color|#rrggbb> (default:	white)
	   Default background color.

       ui.colors.color.dialog.checkbox
	   Dialog checkbox colors.

       ui.colors.color.dialog.checkbox.text <color|#rrggbb> (default: darkred)
	   Default text	color.

       ui.colors.color.dialog.checkbox.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.dialog.checkbox-selected
	   Dialog selected checkbox colors.

       ui.colors.color.dialog.checkbox-selected.text <color|#rrggbb> (default:
       yellow)
	   Default text	color.

       ui.colors.color.dialog.checkbox-selected.background <color|#rrggbb>
       (default: green)
	   Default background color.

       ui.colors.color.dialog.checkbox-label
	   Dialog checkbox label colors.

       ui.colors.color.dialog.checkbox-label.text <color|#rrggbb> (default:
       black)
	   Default text	color.

       ui.colors.color.dialog.checkbox-label.background	<color|#rrggbb>
       (default: white)
	   Default background color.

       ui.colors.color.dialog.button
	   Dialog button colors.

       ui.colors.color.dialog.button.text <color|#rrggbb> (default: white)
	   Default text	color.

       ui.colors.color.dialog.button.background	<color|#rrggbb>	(default:
       blue)
	   Default background color.

       ui.colors.color.dialog.button-selected
	   Dialog selected button colors.

       ui.colors.color.dialog.button-selected.text <color|#rrggbb> (default:
       yellow)
	   Default text	color.

       ui.colors.color.dialog.button-selected.background <color|#rrggbb>
       (default: green)
	   Default background color.

       ui.colors.color.dialog.button-shortcut
	   Dialog button colors.

       ui.colors.color.dialog.button-shortcut.text <color|#rrggbb> (default:
       yellow)
	   Default text	color.

       ui.colors.color.dialog.button-shortcut.background <color|#rrggbb>
       (default: blue)
	   Default background color.

       ui.colors.color.dialog.button-shortcut-selected
	   Dialog selected button colors.

       ui.colors.color.dialog.button-shortcut-selected.text <color|#rrggbb>
       (default: white)
	   Default text	color.

       ui.colors.color.dialog.button-shortcut-selected.background
       <color|#rrggbb> (default: blue)
	   Default background color.

       ui.colors.color.dialog.field
	   Dialog text field colors.

       ui.colors.color.dialog.field.text <color|#rrggbb> (default: white)
	   Default text	color.

       ui.colors.color.dialog.field.background <color|#rrggbb> (default: blue)
	   Default background color.

       ui.colors.color.dialog.field-text
	   Dialog field	text colors.

       ui.colors.color.dialog.field-text.text <color|#rrggbb> (default:
       yellow)
	   Default text	color.

       ui.colors.color.dialog.field-text.background <color|#rrggbb> (default:
       blue)
	   Default background color.

       ui.colors.color.dialog.meter
	   Dialog meter	colors.

       ui.colors.color.dialog.meter.text <color|#rrggbb> (default: white)
	   Default text	color.

       ui.colors.color.dialog.meter.background <color|#rrggbb> (default: blue)
	   Default background color.

       ui.colors.color.dialog.shadow
	   Dialog shadow colors	(see ui.shadows	option).

       ui.colors.color.dialog.shadow.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.color.dialog.shadow.background	<color|#rrggbb>	(default:
       black)
	   Default background color.

       ui.colors.color.title
	   Title bar colors.

       ui.colors.color.title.title-bar
	   Generic title bar colors.

       ui.colors.color.title.title-bar.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.color.title.title-bar.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.title.title-text
	   Title bar text colors.

       ui.colors.color.title.title-text.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.color.title.title-text.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.status
	   Status bar colors.

       ui.colors.color.status.status-bar
	   Generic status bar colors.

       ui.colors.color.status.status-bar.text <color|#rrggbb> (default:	black)
	   Default text	color.

       ui.colors.color.status.status-bar.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.status.status-text
	   Status bar text colors.

       ui.colors.color.status.status-text.text <color|#rrggbb> (default:
       black)
	   Default text	color.

       ui.colors.color.status.status-text.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.tabs
	   Tabs	bar colors.

       ui.colors.color.tabs.unvisited
	   Tab colors for tabs that have not been selected since they
	   completed loading.

       ui.colors.color.tabs.unvisited.text <color|#rrggbb> (default: darkblue)
	   Default text	color.

       ui.colors.color.tabs.unvisited.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.tabs.normal
	   Unselected tab colors.

       ui.colors.color.tabs.normal.text	<color|#rrggbb>	(default: black)
	   Default text	color.

       ui.colors.color.tabs.normal.background <color|#rrggbb> (default:	white)
	   Default background color.

       ui.colors.color.tabs.loading
	   Tab colors for tabs that are	loading	in the background.

       ui.colors.color.tabs.loading.text <color|#rrggbb> (default: darkred)
	   Default text	color.

       ui.colors.color.tabs.loading.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.tabs.selected
	   Selected tab	colors.

       ui.colors.color.tabs.selected.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.color.tabs.selected.background	<color|#rrggbb>	(default:
       green)
	   Default background color.

       ui.colors.color.tabs.separator
	   Tab separator colors.

       ui.colors.color.tabs.separator.text <color|#rrggbb> (default: brown)
	   Default text	color.

       ui.colors.color.tabs.separator.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.color.searched
	   Searched string highlight colors.

       ui.colors.color.searched.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.color.searched.background <color|#rrggbb> (default: lime)
	   Default background color.

       ui.colors.mono
	   Color settings for non-color	terminal.

       ui.colors.mono.mainmenu
	   Main	menu bar colors.

       ui.colors.mono.mainmenu.normal
	   Unselected main menu	bar item colors.

       ui.colors.mono.mainmenu.normal.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.mono.mainmenu.normal.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.mono.mainmenu.selected
	   Selected main menu bar item colors.

       ui.colors.mono.mainmenu.selected.text <color|#rrggbb> (default: gray)
	   Default text	color.

       ui.colors.mono.mainmenu.selected.background <color|#rrggbb> (default:
       black)
	   Default background color.

       ui.colors.mono.mainmenu.hotkey
	   Main	menu hotkey colors.

       ui.colors.mono.mainmenu.hotkey.normal
	   Main	menu unselected	hotkey colors.

       ui.colors.mono.mainmenu.hotkey.normal.text <color|#rrggbb> (default:
       black)
	   Default text	color.

       ui.colors.mono.mainmenu.hotkey.normal.background	<color|#rrggbb>
       (default: white)
	   Default background color.

       ui.colors.mono.mainmenu.hotkey.selected
	   Main	menu selected hotkey colors.

       ui.colors.mono.mainmenu.hotkey.selected.text <color|#rrggbb> (default:
       black)
	   Default text	color.

       ui.colors.mono.mainmenu.hotkey.selected.background <color|#rrggbb>
       (default: white)
	   Default background color.

       ui.colors.mono.menu
	   Menu	bar colors.

       ui.colors.mono.menu.normal
	   Unselected menu item	colors.

       ui.colors.mono.menu.normal.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.mono.menu.normal.background <color|#rrggbb> (default: white)
	   Default background color.

       ui.colors.mono.menu.selected
	   Selected menu item colors.

       ui.colors.mono.menu.selected.text <color|#rrggbb> (default: gray)
	   Default text	color.

       ui.colors.mono.menu.selected.background <color|#rrggbb> (default:
       black)
	   Default background color.

       ui.colors.mono.menu.marked
	   Marked menu item colors.

       ui.colors.mono.menu.marked.text <color|#rrggbb> (default: gray)
	   Default text	color.

       ui.colors.mono.menu.marked.background <color|#rrggbb> (default: white)
	   Default background color.

       ui.colors.mono.menu.hotkey
	   Menu	item hotkey colors.

       ui.colors.mono.menu.hotkey.normal
	   Menu	item unselected	hotkey colors.

       ui.colors.mono.menu.hotkey.normal.text <color|#rrggbb> (default:	gray)
	   Default text	color.

       ui.colors.mono.menu.hotkey.normal.background <color|#rrggbb> (default:
       black)
	   Default background color.

       ui.colors.mono.menu.hotkey.selected
	   Menu	item selected hotkey colors.

       ui.colors.mono.menu.hotkey.selected.text	<color|#rrggbb>	(default:
       gray)
	   Default text	color.

       ui.colors.mono.menu.hotkey.selected.background <color|#rrggbb>
       (default: black)
	   Default background color.

       ui.colors.mono.menu.frame
	   Menu	frame colors.

       ui.colors.mono.menu.frame.text <color|#rrggbb> (default:	black)
	   Default text	color.

       ui.colors.mono.menu.frame.background <color|#rrggbb> (default: white)
	   Default background color.

       ui.colors.mono.dialog
	   Dialog colors.

       ui.colors.mono.dialog.generic
	   Generic dialog colors.

       ui.colors.mono.dialog.generic.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.mono.dialog.generic.background	<color|#rrggbb>	(default:
       white)
	   Default background color.

       ui.colors.mono.dialog.frame
	   Dialog frame	colors.

       ui.colors.mono.dialog.frame.text	<color|#rrggbb>	(default: black)
	   Default text	color.

       ui.colors.mono.dialog.frame.background <color|#rrggbb> (default:	white)
	   Default background color.

       ui.colors.mono.dialog.scrollbar
	   Scrollbar colors.

       ui.colors.mono.dialog.scrollbar.text <color|#rrggbb> (default: white)
	   Default text	color.

       ui.colors.mono.dialog.scrollbar.background <color|#rrggbb> (default:
       black)
	   Default background color.

       ui.colors.mono.dialog.scrollbar-selected
	   Scrollbar selected colors.

       ui.colors.mono.dialog.scrollbar-selected.text <color|#rrggbb> (default:
       black)
	   Default text	color.

       ui.colors.mono.dialog.scrollbar-selected.background <color|#rrggbb>
       (default: white)
	   Default background color.

       ui.colors.mono.dialog.title
	   Dialog title	colors.

       ui.colors.mono.dialog.title.text	<color|#rrggbb>	(default: gray)
	   Default text	color.

       ui.colors.mono.dialog.title.background <color|#rrggbb> (default:	black)
	   Default background color.

       ui.colors.mono.dialog.text
	   Dialog text colors.

       ui.colors.mono.dialog.text.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.mono.dialog.text.background <color|#rrggbb> (default: white)
	   Default background color.

       ui.colors.mono.dialog.checkbox
	   Dialog checkbox colors.

       ui.colors.mono.dialog.checkbox.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.mono.dialog.checkbox.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.mono.dialog.checkbox-selected
	   Dialog selected checkbox colors.

       ui.colors.mono.dialog.checkbox-selected.text <color|#rrggbb> (default:
       white)
	   Default text	color.

       ui.colors.mono.dialog.checkbox-selected.background <color|#rrggbb>
       (default: black)
	   Default background color.

       ui.colors.mono.dialog.checkbox-label
	   Dialog checkbox label colors.

       ui.colors.mono.dialog.checkbox-label.text <color|#rrggbb> (default:
       black)
	   Default text	color.

       ui.colors.mono.dialog.checkbox-label.background <color|#rrggbb>
       (default: white)
	   Default background color.

       ui.colors.mono.dialog.button
	   Dialog button colors.

       ui.colors.mono.dialog.button.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.mono.dialog.button.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.mono.dialog.button-selected
	   Dialog selected button colors.

       ui.colors.mono.dialog.button-selected.text <color|#rrggbb> (default:
       white)
	   Default text	color.

       ui.colors.mono.dialog.button-selected.background	<color|#rrggbb>
       (default: black)
	   Default background color.

       ui.colors.mono.dialog.button-shortcut
	   Dialog button colors.

       ui.colors.mono.dialog.button-shortcut.text <color|#rrggbb> (default:
       white)
	   Default text	color.

       ui.colors.mono.dialog.button-shortcut.background	<color|#rrggbb>
       (default: black)
	   Default background color.

       ui.colors.mono.dialog.button-shortcut-selected
	   Dialog selected button colors.

       ui.colors.mono.dialog.button-shortcut-selected.text <color|#rrggbb>
       (default: black)
	   Default text	color.

       ui.colors.mono.dialog.button-shortcut-selected.background
       <color|#rrggbb> (default: white)
	   Default background color.

       ui.colors.mono.dialog.field
	   Dialog text field colors.

       ui.colors.mono.dialog.field.text	<color|#rrggbb>	(default: gray)
	   Default text	color.

       ui.colors.mono.dialog.field.background <color|#rrggbb> (default:	black)
	   Default background color.

       ui.colors.mono.dialog.field-text
	   Dialog field	text colors.

       ui.colors.mono.dialog.field-text.text <color|#rrggbb> (default: gray)
	   Default text	color.

       ui.colors.mono.dialog.field-text.background <color|#rrggbb> (default:
       black)
	   Default background color.

       ui.colors.mono.dialog.meter
	   Dialog meter	colors.

       ui.colors.mono.dialog.meter.text	<color|#rrggbb>	(default: gray)
	   Default text	color.

       ui.colors.mono.dialog.meter.background <color|#rrggbb> (default:	black)
	   Default background color.

       ui.colors.mono.dialog.shadow
	   Dialog shadow colors	(see ui.shadows	option).

       ui.colors.mono.dialog.shadow.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.mono.dialog.shadow.background <color|#rrggbb> (default:
       black)
	   Default background color.

       ui.colors.mono.title
	   Title bar colors.

       ui.colors.mono.title.title-bar
	   Generic title bar colors.

       ui.colors.mono.title.title-bar.text <color|#rrggbb> (default: gray)
	   Default text	color.

       ui.colors.mono.title.title-bar.background <color|#rrggbb> (default:
       black)
	   Default background color.

       ui.colors.mono.title.title-text
	   Title bar text colors.

       ui.colors.mono.title.title-text.text <color|#rrggbb> (default: gray)
	   Default text	color.

       ui.colors.mono.title.title-text.background <color|#rrggbb> (default:
       black)
	   Default background color.

       ui.colors.mono.status
	   Status bar colors.

       ui.colors.mono.status.status-bar
	   Generic status bar colors.

       ui.colors.mono.status.status-bar.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.mono.status.status-bar.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.mono.status.status-text
	   Status bar text colors.

       ui.colors.mono.status.status-text.text <color|#rrggbb> (default:	black)
	   Default text	color.

       ui.colors.mono.status.status-text.background <color|#rrggbb> (default:
       white)
	   Default background color.

       ui.colors.mono.tabs
	   Tabs	bar colors.

       ui.colors.mono.tabs.unvisited
	   Tab colors for tabs that have not been selected since they
	   completed loading.

       ui.colors.mono.tabs.unvisited.text <color|#rrggbb> (default: gray)
	   Default text	color.

       ui.colors.mono.tabs.unvisited.background	<color|#rrggbb>	(default:
       white)
	   Default background color.

       ui.colors.mono.tabs.normal
	   Unselected tab colors.

       ui.colors.mono.tabs.normal.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.mono.tabs.normal.background <color|#rrggbb> (default: white)
	   Default background color.

       ui.colors.mono.tabs.loading
	   Tab colors for tabs that are	loading	in the background.

       ui.colors.mono.tabs.loading.text	<color|#rrggbb>	(default: gray)
	   Default text	color.

       ui.colors.mono.tabs.loading.background <color|#rrggbb> (default:	white)
	   Default background color.

       ui.colors.mono.tabs.selected
	   Selected tab	colors.

       ui.colors.mono.tabs.selected.text <color|#rrggbb> (default: gray)
	   Default text	color.

       ui.colors.mono.tabs.selected.background <color|#rrggbb> (default:
       black)
	   Default background color.

       ui.colors.mono.tabs.separator
	   Tab separator colors.

       ui.colors.mono.tabs.separator.text <color|#rrggbb> (default: gray)
	   Default text	color.

       ui.colors.mono.tabs.separator.background	<color|#rrggbb>	(default:
       white)
	   Default background color.

       ui.colors.mono.searched
	   Searched string highlight colors.

       ui.colors.mono.searched.text <color|#rrggbb> (default: black)
	   Default text	color.

       ui.colors.mono.searched.background <color|#rrggbb> (default: white)
	   Default background color.

       ui.dialogs
	   Dialogs-specific appearance and behaviour settings.

       ui.dialogs.listbox_min_height <num> (default: 10)
	   Minimal height of the listbox widget	(used e.g. for bookmarks or
	   global history).

       ui.dialogs.shadows [0|1]	(default: 0)
	   Make	dialogs	drop shadows (the shadows are solid, you can adjust
	   their color by ui.colors.*.dialog.shadow). You may also want	to
	   eliminate the wide borders by adjusting setup.h.

       ui.dialogs.underline_hotkeys [0|1] (default: 0)
	   Whether to underline	hotkeys	in menus to make them more visible.
	   Requires that underlining is	enabled	for the	terminal.

       ui.dialogs.underline_button_shortcuts [0|1] (default: 0)
	   Whether to underline	button shortcuts to make them more visible.
	   Requires that underlining is	enabled	for the	terminal.

       ui.leds
	   LEDs	(visual	indicators) options.

       ui.leds.enable [0|1] (default: 1)
	   Enable LEDs.	These visual indicators	will inform you	about various
	   states.

       ui.sessions
	   Sessions settings.

       ui.sessions.auto_restore	[0|1] (default:	0)
	   Automatically restore the session at	start. This feature requires
	   bookmark support.

       ui.sessions.auto_save [0|1] (default: 0)
	   Automatically save the session when quitting. This feature requires
	   bookmark support.

       ui.sessions.auto_save_foldername	<str> (default:	"Auto saved session")
	   Name	of the bookmarks folder	used for auto saving and restoring
	   session. The	name has to be unique. Any folders with	the same name
	   will	be deleted. This only makes sense with bookmark	support.

       ui.sessions.homepage <str> (default: "")
	   The URI to load either at startup time when no URI was given	on the
	   command line	or when	requested by the goto-url-home action. Set to
	   "" if the environment variable WWW_'HOME' should be used as
	   homepage URI	instead.

       ui.sessions.keep_session_active [0|1] (default: 0)
	   Keep	the session active even	if the last terminal exits.

       ui.sessions.snapshot [0|1] (default: 0)
	   Automatically save a	snapshot of all	tabs periodically. This	will
	   periodically	bookmark the tabs of each terminal in a	separate
	   folder for recovery after a crash.

       ui.tabs
	   Window tabs settings.

       ui.tabs.show_bar	<num> (default:	1)
	   Show	tabs bar on the	screen:

	   o   0: means	never

	   o   1: means	only if	two or more tabs are open

	   o   2: means	always

       ui.tabs.wraparound [0|1]	(default: 1)
	   When	moving right from the last tab,	jump to	the first one, and
	   vice	versa.

       ui.tabs.confirm_close [0|1] (default: 0)
	   When	closing	a tab show confirmation	dialog.

       ui.timer
	   Timed action	after certain interval of user inactivity. Someone can
	   even	find this useful, although you may not believe that.

       ui.timer.enable <num> (default: 0)
	   Whether to enable the timer or not:

	   o   0: is don't count down anything

	   o   1: is count down, but don't show	the timer

	   o   2: is count down	and show the timer near	LEDs

       ui.timer.duration <num> (default: 86400)
	   Inactivity timeout in seconds. The maximum of one day should	be
	   enough for just everyone (TM).

       ui.timer.action <str> (default: "")
	   Keybinding action to	be triggered when timer	reaches	zero.

       ui.date_format <str> (default: "%b %e %H:%M")
	   Date	format to use in dialogs. See strftime(3).

       ui.language <language> (default:	"System")
	   Language of user interface. 'System'	means that the language	will
	   be extracted	from the environment dynamically.

       ui.show_status_bar [0|1]	(default: 1)
	   Show	status bar on the screen.

       ui.show_title_bar [0|1] (default: 1)
	   Show	title bar on the screen.

       ui.startup_goto_dialog [0|1] (default: 1)
	   Pop up goto dialog in newly created tabs when there's no homepage
	   set.	This means also	showing	goto dialog on startup.

       ui.success_msgbox [0|1] (default: 1)
	   When	you pressed a [	Save ] button in some manager, this option
	   will	make sure that a box confirming	success	of the operation will
	   pop up.

       ui.window_title [0|1] (default: 1)
	   Set the window title	when running in	a windowing environment	in an
	   xterm-like terminal.	This way the document's	title is shown on the
	   window titlebar.
       Generated using output from ELinks version 0.11.7.

SEE ALSO
       elinks(1), elinkskeys(5)

ELinks 0.11.7			  08/22/2009			ELINKS.CONF(5)

NAME | SYNOPSIS | DESCRIPTION | SYNTAX | EXAMPLES | OPTIONS | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=elinks.conf&sektion=5&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help