Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
dselect(1)			  dpkg suite			    dselect(1)

NAME
       dselect - Debian	package	management frontend

SYNOPSIS
       dselect [option...] [command...]

DESCRIPTION
       dselect	is one of the primary user interfaces for managing packages on
       a Debian	system.	At the dselect main  menu,  the	 system	 administrator
       can:
	- Update the list of available package versions,
	- View the status of installed and available packages,
	- Alter	package	selections and manage dependencies,
	- Install new packages or upgrade to newer versions.

       dselect	operates  as  a	 front-end  to	dpkg(1),  the low-level	Debian
       package handling	tool. It features  a  full-screen  package  selections
       manager	with  package  depends	and  conflicts resolver. When run with
       administrator privileges,  packages  can	 be  installed,	 upgraded  and
       removed.	Various	access methods can be configured to retrieve available
       package version	information  and  installable  packages	 from  package
       repositories.   Depending on the	used access method, these repositories
       can be public archive servers on	the internet, local archive servers or
       cdroms.	The recommended	access method is apt, which is provided	by the
       package apt.

       Normally	dselect	is invoked without parameters. An interactive menu  is
       presented,  offering the	user a list of commands. If a command is given
       as argument, then that command is started immediately. Several  command
       line  parameters	are still available to modify the running behaviour of
       dselect or show additional information about the	program.

OPTIONS
       All options can be specified both  on  the  command  line  and  in  the
       dselect configuration file /usr/local/etc/dpkg/dselect.cfg or the files
       on the configuration directory /usr/local/etc/dpkg/dselect.cfg.d/. Each
       line in the configuration file is either	an option (exactly the same as
       the command line	option but without leading hyphens) or a  comment  (if
       it starts with a	`#').

       --admindir directory
	      Changes  the  directory where the	dpkg `status', `available' and
	      similar files are	located.  This defaults	 to  /var/db/dpkg  and
	      normally there shouldn't be any need to change it.

       -Dfile, --debug file
	      Turn on debugging. Debugging information is sent to file.

       --expert
	      Turns  on	 expert	 mode,	i.e. doesn't display possibly annoying
	      help messages.

       --colour|--color	screenpart:[foreground],[background][:attr[+attr]...]
	      Configures screen	 colors.  This	works  only  if	 your  display
	      supports colors.	This option may	be used	multiple times (and is
	      best used	in dselect.cfg).  Each	use  changes  the  color  (and
	      optionally,  other  attributes)  of one part of the screen.  The
	      parts of the screen (from	top to bottom) are:

	      title  The screen	title.

	      listhead
		     The header	line above the list of packages.

	      list   The scrolling list	of packages (and also some help	text).

	      listsel
		     The selected item in the list.

	      pkgstate
		     In	the list of packages, the text indicating the  current
		     state of each package.

	      pkgstatesel
		     In	 the list of packages, the text	indicating the current
		     state of the currently selected package.

	      infohead
		     The header	line that displays the state of	the  currently
		     selected package.

	      infodesc
		     The package's short description.

	      info   Used  to  display	package	 info  such  as	 the package's
		     description.

	      infofoot
		     The last line of the screen when selecting	packages.

	      query  Used to display query lines

	      helpscreen
		     Color of help screens.

	      After the	part of	 the  screen  comes  a	colon  and  the	 color
	      specification.  You can specify either the foreground color, the
	      background color,	or both, overriding  the  compiled-in  colors.
	      Use standard curses color	names.

	      Optionally,  after the color specification is another colon, and
	      an attribute specification. This	is  a  list  of	 one  or  more
	      attributes,  separated  by  plus	(`+')  characters.   Available
	      attributes  include  (not	 all  of  these	 will  work   on   all
	      terminals): normal, standout, underline, reverse,	blink, bright,
	      dim, bold

       -?, --help
	      Print a brief help text and exit successfully.

       --version
	      Print version information	and exit successfully.

COMMANDS
       When dselect is started it can perform the following  commands,	either
       directly	 if  it	 was specified on the command line or by prompting the
       user with a menu	of available commands if running interactively:

   access
       Choose and configure an access method to	access package repositories.

       By default, dselect provides several methods such as  cdrom,  multi_cd,
       nfs,  multi_nfs,	 harddisk,  mounted,  multi_mount,  floppy or ftp, but
       other packages may provide  additional  methods,	 eg.  the  apt	access
       method provided by the apt package.

       The use of the apt access method	is strongly recommended.

   update
       Refresh the available packages database.

       Retrieves  a  list  of  available  package  versions  from  the package
       repository, configured for the current access method,  and  update  the
       dpkg   database.	 The  package  lists  are  commonly  provided  by  the
       repository as files named Packages or Packages.gz.  These files can  be
       generated    by	  repository	maintainers,	using	 the   program
       dpkg-scanpackages(1).

       Details	of  the	 update	 command  depend  on   the   access   method's
       implementation.	 Normally  the process is straightforward and requires
       no user interaction.

   select
       View or manage package selections and dependencies.

       This is the main	function of dselect. In	the select  screen,  the  user
       can  review  a  list  of	all available and installed packages. When run
       with administrator privileges, it is  also  possible  to	 interactively
       change  packages	 selection  state.  dselect tracks the implications of
       these changes to	other depending	or conflicting packages.

       When a conflict or failed depends is detected, a	dependency  resolution
       subscreen  is  prompted	to  the	 user.	In  this  screen,  a  list  of
       conflicting or depending	 packages  is  shown,  and  for	 each  package
       listed,	the  reason  for  its listing is shown.	The user may apply the
       suggestions proposed by dselect,	override them, or  back	 out  all  the
       changes,	 including  the	 ones  that  created the unresolved depends or
       conflicts.

       The use of the interactive  package  selections	management  screen  is
       explained in more detail	below.

   install
       Installs	selected packages.

       The  configured	access	method	will  fetch  installable or upgradable
       packages	from the relevant repositories and install these  using	 dpkg.
       Depending  on the implementation	of the access method, all packages can
       be prefetched before installation, or fetched when needed.  Some	access
       methods may also	remove packages	that were marked for removal.

       If  an  error  occurred	during install,	it is usually advisable	to run
       install again. In most cases, the problems will disappear or be solved.
       If problems persist or the installation performed was incorrect,	please
       investigate into	the causes and circumstances, and file a  bug  in  the
       Debian bug tracking system. Instructions	on how to do this can be found
       at https://bugs.debian.org/ or by reading the documentation for	bug(1)
       or reportbug(1),	if these are installed.

       Details	 of   the  install  command  depend  on	 the  access  method's
       implementation.	The user's attention and input may be required	during
       installation, configuration or removal of packages. This	depends	on the
       maintainer scripts in the  package.  Some  packages  make  use  of  the
       debconf(1)  library,  allowing  for  more  flexible  or	even automated
       installation setups.

   config
       Configures any previously installed, but	not fully configured packages.

   remove
       Removes or purges installed packages, that are marked for removal.

   quit
       Quit dselect.

       Exits the program with zero (successful)	errorcode.

PACKAGE	SELECTIONS MANAGEMENT
   Introduction
       dselect directly	exposes	the administrator to some of the  complexities
       involved	  with	 managing   large   sets   of	packages   with	  many
       interdependencies. For a	user who is unfamiliar with the	 concepts  and
       the  ways  of  the  Debian  package  management system, it can be quite
       overwhelming. Although dselect is aimed at  easing  package  management
       and  administration,  it	is only	instrumental in	doing so and cannot be
       assumed to be a	sufficient  substitute	for  administrator  skill  and
       understanding.  The  user  is required to be familiar with the concepts
       underlying the Debian packaging system.	In case	of doubt, consult  the
       dpkg(1) manpage and the distribution policy.

       Unless  dselect	is  run	 in expert or immediate	mode, a	help screen is
       first displayed when choosing this command from the menu. The  user  is
       strongly	 advised  to  study  all  of  the information presented	in the
       online help screens, when one pops up.  The online help screens can  at
       any time	be invoked with	the `?'	key.

   Screen layout
       The  select screen is by	default	split in a top and a bottom half.  The
       top half	shows  a  list	of  packages.  A  cursor  bar  can  select  an
       individual package, or a	group of packages, if applicable, by selecting
       the group header. The bottom half of  the  screen  shows	 some  details
       about  the  package  currently  selected	in the top half	of the screen.
       The type	of detail that is displayed can	be varied.

       Pressing	the `I'	key toggles a  full-screen  display  of	 the  packages
       list,  an  enlarged  view  of the package details, or the equally split
       screen.

   Package details view
       The  package  details  view  by	default	 shows	the  extended  package
       description  for	the package that is currently selected in the packages
       status list.  The type of detail	can be toggled	by  pressing  the  `i'
       key.  This alternates between:
	- the extended description
	- the control information for the installed version
	- the control information for the available version

       In  a  dependency  resolution  screen, there is also the	possibility of
       viewing the specific unresolved depends or  conflicts  related  to  the
       package and causing it to be listed.

   Packages status list
       The  main  select  screen  displays a list of all packages known	to the
       Debian package management system. This includes packages	 installed  on
       the system and packages known from the available	packages database.

       For  every  package,  the  list	shows  the package's status, priority,
       section,	installed and available	architecture, installed	and  available
       versions,  the package name and its short description, all in one line.
       By pressing the `A' key,	the display of	the  installed	and  available
       architecture  can  be  toggled  between on an off.  By pressing the `V'
       key, the	display	of the installed and available version can be  toggled
       between on an off.  By pressing the `v' key, the	package	status display
       is toggled between verbose and shorthand.   Shorthand  display  is  the
       default.

       The  shorthand status indication	consists of four parts:	an error flag,
       which should normally be	clear, the current status, the last  selection
       state  and  the	current	 selection state.  The first two relate	to the
       actual state of the package, the	second pair are	about  the  selections
       set by the user.

       These are the meanings of the shorthand package status indicator	codes:
	Error flag:
	 empty	 no error
	 R	 serious error,	needs reinstallation;
	Installed state:
	 empty	 not installed;
	 *	 fully installed and configured;
	 -	 not installed but some	config files may remain;
	 U	 unpacked but not yet configured;
	 C	 half-configured (an error happened);
	 I	 half-installed	(an error happened).
	Current	and requested selections:
	 *	 marked	for installation or upgrade;
	 -	 marked	for removal, configuration files remain;
	 =	 on hold: package will not be processed	at all;
	 _	 marked	for purge, also	remove configuration;
	 n	 package is new	and has	yet to be marked.

   Cursor and screen movement
       The  package  selection	list  and  the	dependency conflict resolution
       screens can be navigated	using motion commands mapped to	the  following
       keys:
	 p, Up,	k	    move cursor	bar up
	 n, Down, j	    move cursor	bar down
	 P, Pgup, Backspace scroll list	1 page up
	 N, Pgdn, Space	    scroll list	1 page down
	 ^p		    scroll list	1 line up
	 ^n		    scroll list	1 line down
	 t, Home	    jump to top	of list
	 e, End		    jump to end	of list
	 u		    scroll info	1 page up
	 d		    scroll info	1 page down
	 ^u		    scroll info	1 line up
	 ^d		    scroll info	1 line down
	 B, Left-arrow	    pan	display	1/3 screen left
	 F, Right-arrow	    pan	display	1/3 screen right
	 ^b		    pan	display	1 character left
	 ^f		    pan	display	1 character right

   Searching and sorting
       The  list  of packages can be searched by package name. This is done by
       pressing	`/',  and  typing  a  simple  search  string.  The  string  is
       interpreted  as	a regex(7) regular expression.	If you add `/d'	to the
       search expression, dselect will also search in  descriptions.   If  you
       add  `/i'  the  search will be case insensitive.	 You may combine these
       two suffixes like this: `/id'.  Repeated	searching is  accomplished  by
       repeatedly  pressing  the  `n' or `\' keys, until the wanted package is
       found.  If the search reaches the bottom	of the list, it	wraps  to  the
       top and continues searching from	there.

       The  list  sort	order  can  be varied by pressing the `o' and `O' keys
       repeatedly.  The	following nine sort orderings can be selected:
	alphabet	  available	      status
	priority+section  available+priority  status+priority
	section+priority  available+section   status+section
       Where not listed	above explicitly, alphabetic  order  is	 used  as  the
       final subordering sort key.

   Altering selections
       The  requested  selection  state	 of individual packages	may be altered
       with the	following commands:
	 +, Insert    install or upgrade
	 =, H	      hold in present state and	version
	 :, G	      unhold: upgrade or leave uninstalled
	 -, Delete    remove, but leave	configuration
	 _	      remove & purge configuration

       When the	change request results in one or more unsatisfied  depends  or
       conflicts,  dselect  prompts  the  user	with  a	 dependency resolution
       screen. This will be further explained below.

       It is also possible to  apply  these  commands  to  groups  of  package
       selections,  by	pointing the cursor bar	onto a group header. The exact
       grouping	 of  packages  is  dependent  on  the  current	list  ordering
       settings.

       Proper  care  should be taken when altering large groups	of selections,
       because this can	instantaneously	create	large  numbers	of  unresolved
       depends	or  conflicts,	all  of	which will be listed in	one dependency
       resolution screen, making them very hard	to handle. In  practice,  only
       hold and	unhold operations are useful when applied to groups.

   Resolving depends and conflicts
       When  the  change request results in one	or more	unsatisfied depends or
       conflicts, dselect  prompts  the	 user  with  a	dependency  resolution
       screen. First however, an informative help screen is displayed.

       The  top	 half  of  this	 screen	 lists all the packages	that will have
       unresolved depends or conflicts,	as a result of the  requested  change,
       and  all	 the  packages	whose  installation  can  resolve any of these
       depends or whose	removal	can resolve any	of the conflicts.  The	bottom
       half defaults to	show the depends or conflicts that cause the currently
       selected	package	to be listed.

       When the	sublist	of packages is displayed initially, dselect  may  have
       already	set  the  requested  selection	status	of  some of the	listed
       packages, in order to resolve the depends or conflicts that caused  the
       dependency  resolution  screen  to be displayed.	Usually, it is best to
       follow up the suggestions made by dselect.

       The listed packages' selection state may	be reverted  to	 the  original
       settings,  as they were before the unresolved depends or	conflicts were
       created,	by pressing the	 `R'  key.   By	 pressing  the	`D'  key,  the
       automatic  suggestions  are  reset,  but	 the  change  that  caused the
       dependency resolution screen to	be  prompted  is  kept	as  requested.
       Finally,	by pressing `U', the selections	are again set to the automatic
       suggestion values.

   Establishing	the requested selections
       By pressing  enter,  the	 currently  displayed  set  of	selections  is
       accepted.  If  dselect detects no unresolved depends as a result	of the
       requested selections, the new selections	 will  be  set.	  However,  if
       there  are  any	unresolved depends, dselect will again prompt the user
       with a dependency resolution screen.

       To alter	a  set	of  selections	that  creates  unresolved  depends  or
       conflicts  and  forcing	dselect	 to accept it, press the `Q' key. This
       sets  the  selections  as  specified  by	 the  user,   unconditionally.
       Generally, don't	do this	unless you've read the fine print.

       The  opposite effect, to	back out any selections	change requests	and go
       back to the previous list of selections,	is attained  by	 pressing  the
       `X'  or	escape	keys.  By repeatedly pressing these keys, any possibly
       detrimental changes to the requested package selections can  be	backed
       out completely to the last established settings.

       If  you	mistakenly  establish some settings and	wish to	revert all the
       selections to what is currently installed on the	system,	press the  `C'
       key.   This  is	somewhat  similar  to  using the unhold	command	on all
       packages, but provides a	more obvious panic button in cases  where  the
       user pressed enter by accident.

EXIT STATUS
       0      The requested command was	successfully performed.

       2      Fatal  or	unrecoverable error due	to invalid command-line	usage,
	      or interactions  with  the  system,  such	 as  accesses  to  the
	      database,	memory allocations, etc.

ENVIRONMENT
       HOME   If  set, dselect will use	it as the directory from which to read
	      the user specific	configuration file.

BUGS
       The dselect package selection interface is confusing to some new	users.
       Reportedly, it even makes seasoned kernel developers cry.

       The documentation is lacking.

       There is	no help	option in the main menu.

       The visible list	of available packages cannot be	reduced.

       The  built  in access methods can no longer stand up to current quality
       standards. Use the access method	provided by apt, it is	not  only  not
       broken, it is also much more flexible than the built in access methods.

SEE ALSO
       dpkg(1),	apt-get(8), sources.list(5), deb(5).

1.18.24				  2017-05-17			    dselect(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMANDS | PACKAGE SELECTIONS MANAGEMENT | EXIT STATUS | ENVIRONMENT | BUGS | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=dselect&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help