Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
DIST(1)			    General Commands Manual		       DIST(1)

NAME
       dist - redistribute a message to	additional addresses

SYNOPSIS
       dist [+folder] [msg] [-form formfile] [-annotate	| -noannotate] [-in-
	    place | -noinplace]	[-draftfolder +folder] [-draftmessage msg]
	    [-nodraftfolder] [-editor editor] [-noedit]	[-width	columns]
	    [-from address] [-to address] [-cc address]	[-fcc +folder] [-what-
	    nowproc program] [-nowhatnowproc] [-atfile]	[-noatfile] [-version]
	    [-help]

DESCRIPTION
       Dist is similar to forw.	 It prepares the specified message for	redis-
       tribution  to  addresses	 that (presumably) are not on the original ad-
       dress list.

       The default message form	contains the following elements:

	    Resent-From: {from switch} or <Local-Mailbox> or <username@hostname>
	    Resent-To: {to switch} or blank
	    Resent-cc: {cc switch} or blank
	    Resent-fcc:	{fcc switch} or	blank

       If a file named "distcomps" exists in the user's	nmh directory, it will
       be  used	 instead  of  this default form.  You may specify an alternate
       forms file with the switch -form	formfile.  Forms are processed via the
       nmh template system; see	mh-format(5) for details.  Components from the
       redistributed message are available as standard	component  escapes  in
       the forms file.

       In  addition to the standard mh-format(5) escapes, the following	compo-
       nent escapes are	also supported:

	    Escape    Returns	Description
	    fcc	      string	Any folders specified with `-fcc folder'
	    nmh-from  string	Addresses specified with `-from	address'
	    nmh-to    string	Addresses specified with `-to address'
	    nmh-cc    string	Addresses specified with `-cc address'

       See the forw(1) man page	for descriptions of the	-from, -to,  -cc,  and
       -fcc switches.

       If the draft already exists, dist will ask you as to the	disposition of
       the draft.  A reply of quit will	abort dist, leaving the	draft  intact;
       replace will replace the	existing draft with a blank skeleton; and list
       will display the	draft.

       Only those addresses in "Resent-To:", "Resent-cc:",  and	 "Resent-Bcc:"
       will  be	 sent.	 Also,	a  "Resent-Fcc:	 folder"  will be honored (see
       send(1)).  Note that with dist, the  draft  should  contain  only  "Re-
       sent-xxx:"  fields and no body.	The headers and	the body of the	origi-
       nal message are copied to the draft when	the message is sent.  Use care
       in constructing the headers for the redistribution.

       Because	the  draft  is minimal,	the prompter(1)	editor is quite	useful
       with dist.

       If the -annotate	switch is given, the  message being  distributed  will
       be annotated with the lines:
	      Resent: date
	      Resent: addrs
       where each address list contains	as many	lines as required.  This anno-
       tation will be done only	if the message is sent directly	from dist.  If
       the  message is not sent	immediately from dist, "comp -use" may be used
       to re-edit and send the constructed message, but	the annotations	 won't
       take place.  Normally annotations are done inplace in order to preserve
       any links to the	message.  You may use the -noinplace switch to	change
       this.

       See  comp(1)  for  a  description  of the -editor and -noedit switches.
       Note that while in the editor, with -atfile and if the  current	direc-
       tory  is	writable, the message being resent is available	through	a link
       named "@" (assuming the default whatnowproc).  In addition, the	actual
       pathname	of the message is stored in the	environment variable $editalt,
       and the pathname	of the folder containing the message is	stored in  the
       environment  variable  $mhfolder.  The creation of the "@" file is con-
       trolled via the -atfile and -noatfile options.

       The -draftfolder	+folder	and -draftmessage msg switches invoke the  nmh
       draft  folder  facility.	  This is an advanced (and highly useful) fea-
       ture.  Consult the mh-draft(5) man page for more	information.

       Upon exiting from the editor, dist will	invoke	the  whatnow  program.
       See  whatnow(1)	for a discussion of available options.	The invocation
       of this program can be inhibited	by using  the  -nowhatnowproc  switch.
       (In  truth  of fact, it is the whatnow program which starts the initial
       edit.  Hence, -nowhatnowproc will prevent any edit from occurring.)

FILES
       /usr/local/etc/nmh/distcomps	    The	standard message skeleton
       or <mh-dir>/distcomps		    Rather than	the standard skeleton
       $HOME/.mh_profile		    The	user profile
       <mh-dir>/draft			    The	draft file

PROFILE	COMPONENTS
       Path:		    To determine the user's nmh	directory
       Current-Folder:	    To find the	default	current	folder
       Draft-Folder:	    To find the	default	draft-folder
       Editor:		    To override	the default editor
       fileproc:	    Program to refile the message
       whatnowproc:	    Program to ask the "What now?" questions

SEE ALSO
       comp(1),	forw(1), prompter(1), repl(1), send(1),	whatnow(1)

DEFAULTS
       `+folder' defaults to the current folder
       `msg' defaults to cur
       `-noannotate'
       `-nodraftfolder'
       `-inplace'
       `-noatfile'

CONTEXT
       If a folder is given, it	will become the	current	folder.	  The  message
       distributed will	become the current message.

HISTORY
       Dist  originally	 used headers of the form "Distribute-xxx:" instead of
       "Resent-xxx:".  In order	to conform with	the  ARPA  Internet  standard,
       RFC 822,	the "Resent-xxx:" form is now used.  Dist will recognize "Dis-
       tribute-xxx:" type headers  and	automatically  convert	them  to  "Re-
       sent-xxx:".

BUGS
       Dist does not rigorously	check the message being	distributed for	adher-
       ence to the transport standard, but post	called by send does.  The post
       program	will  balk  (and rightly so) at	poorly formatted messages, and
       dist won't correct things for you.

       If whatnowproc is whatnow, then comp uses a built-in whatnow,  it  does
       not  actually  run  the whatnow program.	 Hence,	if you define your own
       whatnowproc, don't call it whatnow since	comp won't run it.

nmh-1.6				 June 18, 2012			       DIST(1)

NAME | SYNOPSIS | DESCRIPTION | FILES | PROFILE COMPONENTS | SEE ALSO | DEFAULTS | CONTEXT | HISTORY | BUGS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=dist&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help