Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
dhcp(5)		      Standards, Environments, and Macros	       dhcp(5)

NAME
       dhcp - Dynamic Host Configuration Protocol

DESCRIPTION
       Dynamic	Host  Configuration  Protocol (DHCP) enables host systems in a
       TCP/IP network to be configured automatically for the network  as  they
       boot.  DHCP uses	a client/server	mechanism: servers store configuration
       information for clients,	and provide that information upon  a  client's
       request.	The information	can include the	client's IP address and	infor-
       mation about network services available to the client.

       This manual page	provides a brief summary of the	Solaris	DHCP implemen-
       tation.

   Solaris DHCP	Client
       The  Solaris  DHCP  client  is implemented as background	daemon,	dhcpa-
       gent(1M). This daemon is	started	automatically during bootup  if	 there
       exists at least one dhcp.interface file in /etc.	Only interfaces	with a
       corresponding /etc/dhcp.interface  file	are  automatically  configured
       during  boot. Network parameters	needed for system configuration	during
       bootup are extracted  from  the	information  recieved  by  the	daemon
       through the use of the dhcpinfo(1) command. The daemon's	default	behav-
       ior can be altered by changing the tunables in the  /etc/default/dhcpa-
       gent  file. The daemon is controlled by the ifconfig(1M)	utility. Check
       the status of the daemon	using the netstat(1M)  and  ifconfig(1M)  com-
       mands.

   Solaris DHCP	Server
       The  Solaris  DHCP  server  is  implemented  as	a  background  daemon,
       in.dhcpd(1M). This daemon can deliver network configuration information
       to  either  BOOTP or DHCP clients. The Solaris DHCP service can be man-
       aged using the dhcpmgr(1M) GUI or the command line  utilities  dhcpcon-
       fig(1M),	dhtadm(1M), and	pntadm(1M).

   DHCP	Configuration Tables
       The  Solaris DHCP server	stores client configuration information	in the
       following two types of tables:

	      dhcptab tables
		    Contain macros and options (also known as  symbols),  used
		    to	construct  a  package  of configuration	information to
		    send to each DHCP client. There exists  only  one  dhcptab
		    for	 the  DHCP  service.  The dhcptab(4) can be viewed and
		    modified  using  the  dhtadm(1M)  command  or  dhcpmgr(1M)
		    graphical  utility.	 See  dhcptab(4)  for more information
		    about the syntax of	dhcptab	records.  See  dhcp_inittab(4)
		    for	more information about the DHCP	options	and symbols.

	      DHCP network tables
		    DHCP  network tables, which	contain	mappings of client IDs
		    to IP addresses and	parameters associated with  those  ad-
		    dresses.  Network  tables are named	with the IP address of
		    the	network, and can be created, viewed, and modified  us-
		    ing	 the  pntadm command or	dhcpmgr	graphical utility. See
		    dhcp_network(4) for	more information about network tables.

SEE ALSO
       dhcpinfo(1), dhcpagent(1M),  dhcpconfig(1M),  dhcpmgr(1M),  dhtadm(1M),
       ifconfig(1M),   in.dhcpd(1M),   netstat(1M),   pntadm(1M),  syslog(3C),
       dhcp_network(4),	   dhcptab(4),	  dhcpsvc.conf(4),    dhcp_inittab(4),
       dhcp_modules(5)

       Solaris DHCP Service Developer's	Guide

       Alexander,  S., and R. Droms, DHCP Options and BOOTP Vendor Extensions,
       RFC 2132, Silicon Graphics, Inc., Bucknell University, March 1997.

       Droms, R., Interoperation Between DHCP and BOOTP,, RFC  1534,  Bucknell
       University, October 1993.

       Droms,  R.,  Dynamic  Host  Configuration  Protocol, RFC	2131, Bucknell
       University, March 1997.

       Wimer, W., Clarifications and Extensions	for  the  Bootstrap  Protocol,
       RFC 1542, Carnegie Mellon University, October 1993.

SunOS 5.9			  13 Mar 2001			       dhcp(5)

NAME | DESCRIPTION | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=dhcp&sektion=5&manpath=SunOS+5.9>

home | help