Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
deb-buildinfo(5)		  dpkg suite		      deb-buildinfo(5)

NAME
       deb-buildinfo - Debian build information	file format

SYNOPSIS
       filename.buildinfo

DESCRIPTION
       Each  Debian source package build can record the	build information in a
       .buildinfo control file,	which contains a number	of fields.  Each field
       begins  with  a	tag,  such  as	Source	or  Binary (case insensitive),
       followed	by a colon, and	the body of the	field.	Fields	are  delimited
       only  by	 field tags.  In other words, field text may be	multiple lines
       in length, but the installation tools will generally  join  lines  when
       processing  the	body  of  the  field  (except in case of the multiline
       fields	Binary-Only-Changes,   Installed-Build-Depends,	  Environment,
       Checksums-Md5, Checksums-Sha1 and Checksums-Sha256, see below).

       The  control  data  might  be  enclosed	in  an	OpenPGP	 ASCII Armored
       signature, as specified in RFC4880.

       The name	of the .buildinfo file will depend on the type	of  build  and
       will  be	 as  specific  as  necessary  but  not	more; for a build that
       includes	   any	  the	  name	   will	    be	   source-name_binary-
       version_arch.buildinfo,	or otherwise for a build that includes all the
       name will be source-name_binary-version_all.buildinfo, or otherwise for
       a  build	 that  includes	 source	 the  name will	be source-name_source-
       version_source.buildinfo.

FIELDS
       Format: format-version (required)
	      The value	of this	field declares the format version of the file.
	      The  syntax  of the field	value is a version number with a major
	      and minor	 component.   Backward	incompatible  changes  to  the
	      format  will  bump  the  major  version, and backward compatible
	      changes (such as field additions)	will bump the  minor  version.
	      The current format version is 1.0.

       Source: source-name [(source-version)] (required)
	      The  name	 of the	source package.	 If the	source version differs
	      from the binary version, then the	source-name will  be  followed
	      by  a  source-version  in	parenthesis.  This can happen when the
	      build is for a binary-only non-maintainer	upload.

       Binary: binary-package-list (required)
	      This folded field	is a space-separated list of  binary  packages
	      built.

       Architecture: arch-list (required)
	      This  space-separated field lists	the architectures of the files
	      currently	being built.  Common architectures are	amd64,	armel,
	      i386,  etc.   Note that the all value is meant for packages that
	      are architecture independent.  If	the source for the package  is
	      also  being  built,  the	special	 entry source is also present.
	      Architecture wildcards must never	be present in the list.

       Version:	version-string (required)
	      Typically, this is the  original	package's  version  number  in
	      whatever	form the program's author uses.	 It may	also include a
	      Debian revision number (for  non-native  packages).   The	 exact
	      format and sorting algorithm are described in deb-version(7).

       Binary-Only-Changes:
	changelog-entry
	      This  multiline  field  contains	the  concatenated  text	of the
	      changelog	entry for a binary-only	non-maintainer upload (binNMU)
	      if that is the case.  To make this a valid multiline field empty
	      lines are	replaced with a	single full stop (`.') and  all	 lines
	      are  indented by one space character.  The exact content depends
	      on the changelog format.

       Checksums-Md5: (required)
       Checksums-Sha1: (required)
       Checksums-Sha256: (required)
	checksum size filename
	      These multiline fields contain a list of files with  a  checksum
	      and  size	 for  each one.	 These fields have the same syntax and
	      differ  only  in	the   checksum	 algorithm   used:   MD5   for
	      Checksums-Md5,   SHA-1   for   Checksums-Sha1  and  SHA-256  for
	      Checksums-Sha256.

	      The first	line of	the field value	(the part on the same line  as
	      the  field  name	followed  by  a	 colon)	 is always empty.  The
	      content of the field is expressed	 as  continuation  lines,  one
	      line  per	 file.	 Each line consists of space-separated entries
	      describing the file: the checksum, the file size,	and  the  file
	      name.

	      These fields list	all files that make up the build.

       Build-Origin: name
	      The name of the distribution this	package	is originating from.

       Build-Architecture: arch	(required)
	      The  Debian  architecture	 for  the installation the packages is
	      being built in.  Common architectures are	 amd64,	 armel,	 i386,
	      etc.

       Build-Date: build-date
	      The  date	 the package was built.	 It must be in the same	format
	      as the date in a deb-changelog(5)	entry.

       Build-Kernel-Version: build-kernel-version
	      The release and version (in an unspecified format) of the	kernel
	      running  on  the	build  system.	This field is only going to be
	      present if the builder has explicitly  requested	it,  to	 avoid
	      leaking possibly sensitive information.

       Build-Path: build-path
	      The absolute build path, which correspond	to the unpacked	source
	      tree.  This field	is only	going to be present if the vendor  has
	      whitelisted  it via some pattern match to	avoid leaking possibly
	      sensitive	information.

	      On Debian	and derivatives	only build paths starting with /build/
	      will emit	this field.

       Build-Tainted-By:
	taint-reason-list
	      This  folded  field  contains  a	space-separated	 list  of non-
	      exhaustive  reason  tags	(formed	 by  alphanumeric   and	  dash
	      characters)  which  identify  why	 the  current  build  has been
	      tainted (since dpkg 1.19.5).

	      On Debian	and derivatives	 the  following	 reason	 tags  can  be
	      emitted:

	      merged-usr-via-symlinks
		     The  system  has  a  merged /usr via symlinks.  This will
		     confuse  dpkg-query,   dpkg-statoverride,	 dpkg-trigger,
		     update-alternatives and any other tool using pathnames as
		     keys into	their  databases,  as  it  creates  filesystem
		     aliasing  problems,  and messes with the understanding of
		     the filesystem that dpkg has recorded  in	its  database.
		     For  build	 systems  that	hardcode pathnames to specific
		     binaries or libraries on the resulting artifacts, it  can
		     also  produce  packages  that  will  be incompatible with
		     non-/usr-merged filesystems.

	      usr-local-has-configs
		     The system	has configuration files	under /usr/local/etc.

	      usr-local-has-includes
		     The system	has header files under /usr/local/include.

	      usr-local-has-programs
		     The  system  has	programs   under   /usr/local/bin   or
		     /usr/local/sbin.

	      usr-local-has-libraries
		     The  system  has libraries, either	static or shared under
		     /usr/local/lib.

       Installed-Build-Depends:	(required)
	package-list
	      The list of installed and	configured packages that might	affect
	      the package build	process.

	      The  list	 consists  of  each  package  name,  optionally	 arch-
	      qualified	for  foreign  architectures,  with  an	exact  version
	      restriction, separated by	commas.

	      The  list	 includes  all	essential packages, packages listed in
	      Build-Depends,  Build-Depends-Arch,  Build-Depends-Indep	source
	      control  fields,	any  vendor specific builtin dependencies, and
	      all their	recursive dependencies.	 On Debian and derivatives the
	      dependency builtin is build-essential.

	      For  dependencies	 coming	 from  the  source control fields, all
	      dependency alternatives and all providers	 of  virtual  packages
	      depended on will be included.

       Environment:
	variable-list
	      The  list	 of environment	variables that are known to affect the
	      package build process, with each environment  variable  followed
	      by  an  equal  sign (`=')	and the	variable's quoted value, using
	      double quotes (`"'), and backslashes escaped (`\\').

SEE ALSO
       deb-changes(5), deb-version(7), dpkg-genbuildinfo(1).

1.19.7				  2019-06-03		      deb-buildinfo(5)

NAME | SYNOPSIS | DESCRIPTION | FIELDS | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=deb-buildinfo&sektion=5&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help