Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
DAR_MANAGER(1)		    General Commands Manual		DAR_MANAGER(1)

NAME
       dar_manager  - compiles several archives	contents in a database to ease
       file restoration

SYNOPSIS
       dar_manager [-v]	-C [<path>/]<database>

       dar_manager [-v]	 -B  [<path>/]<database>  -A  [<path>/]<basename>  [-9
       <min-digits>] [[<path>/]<archive_basename>]

       dar_manager [-v]	-B [<path>/]<database> -l

       dar_manager [-v]	-B [<path>/]<database> -D <number>[-<number>]

       dar_manager  [-v] -B [<path>/]<database>	-b <number> <new_archive_base-
       name>

       dar_manager [-v]	-B [<path>/]<database> -p <number> <path>

       dar_manager [-v]	-B [<path>/]<database> -o [list	of options to pass  to
       dar]

       dar_manager [-v]	-B [<path>/]<database> -d [<path to dar	command>]

       dar_manager [-v]	-B [<path>/]<database> [-N] [-k] [-w <date>] [-e "<ex-
       tra options to dar>"] -r	[list of files to restore]

       dar_manager [-v]	-B [<path>/]<database> -u <number>

       dar_manager [-v]	-B [<path>/]<database> -f file

       dar_manager [-v]	-B [<path>/]<database> -s

       dar_manager [-v]	-B [<path>/]<database> -m <number> <number>

       dar_manager [-v]	-B [<path>/]<database> -c

       dar_manager [-v]	-B [<path>/]<database> -i

       dar_manager [-v]	-B [<path>/]<database> -@ { <filename> | "-" }

       dar_manager -h

       dar_manager -V

DESCRIPTION
       dar_manager is part of the Disk Archive suite. Its purpose is  to  sim-
       plify  the  restoration	of  a set of few files present in many backup,
       full or differential. This is achieved by gathering  the	 catalogue  of
       each  archive  (this has	to be done once). At any time you just have to
       give the	relative path to the files you want  to	 restore,  dar_manager
       will  call  dar with the	proper options and restore the last version of
       each file (or the last version before given date). Note	that  dar_man-
       ager  is	 to  be	 used when you have remove some	files by accident some
       time ago	and wish to recover them. It thus not adapted to  restore  the
       state  a	 directory  tree  had at a given time, in particular when some
       files have to be	removed. For that you must use dar directly  with  the
       corresponding  archive  to  the	date for which you wish	to restore the
       state.

       you can restore any file	by hand	without	dar_manager , but if you  make
       a  lot  of differential backup, you may spend many time to find the ar-
       chive that contains the last version of your file, as dar will not save
       it  if  it has not changed since	previous backup.  dar_manager simplify
       the process by looking in its internal  database,  built	 from  archive
       "catalogues".

OPTIONS
       -C, --create [<path>/]<database>
			   creates  an empty database that will	collect	infor-
			   mation about	several	archives. The <database> is  a
			   filename that is required for -B option. To destroy
			   a <database>	just remove the	file.

       -B, --base [<path>/]<database>
			   specify the database	to read	or modify. The	<data-
			   base>  file	must exist, and	have a database	struc-
			   ture	(see -C	option).

       -i, --interactive   use a keyboard interactive text menu	to  do	opera-
			   tions on the	given database.	So you may avoid read-
			   ing the other  options  described  in  this	manual
			   page, if you	wish, and just use the interactive op-
			   tion. You will however always  have	to  create  an
			   empty  database (-C option) and restore files manu-
			   ally	(-r option).

       -A, --add [<path>/]<basename> [ [<path>/]<archive_basename>]
			   add an archive to the database. An  isolated	 cata-
			   logue can also be used only if it has been produced
			   by dar version 1.2.0	or above. Why  ?  Because,  an
			   isolated  catalogue	produced by older version will
			   always tell that no files are saved in the  archive
			   of  reference, in that case the solution is to pro-
			   vide	the archive itself as  argument.  An  optional
			   second  argument  is	the basename of	the archive if
			   it is different from	the first argument  (need  for
			   extraction of files). For example you could have an
			   isolated catalogue in first argument	and the	 base-
			   name	 of  the original archive (where is stored the
			   data) as second argument. By	default,

       -9, --min-digits	<num>
			   the slice number zeroed padding to use to  get  the
			   slices  filename (for more details see dar man page
			   at this same	option)	dar_manager will look  for  an
			   archive  of	reference  in the command line used to
			   create each archive,	but in some cases, it  may  be
			   necessary  to specify the archive name (for example
			   if you've changed its name).

       -l, --list	   displays the	information about  the	archives  com-
			   piled  in  the database. In particular, a number is
			   given to each archive, which	is  required  to  some
			   other  option to design a particular	archive	within
			   the database. Nothing avoids	you to feed the	 data-
			   base	 with  several	archive	of the same basename !
			   You will just have to guess which one is asked  un-
			   der this name. :-)

       -D, --delete <number>[-<number>]
			   removes an archive (or a range of archive) from the
			   database. The number	of the archive (or the min and
			   max	number	or the archive range) is correspond to
			   those given by the -l option. Note that all archive
			   number greater than the one(s) to be	delete will be
			   decremented to keep continuous numbering of the ar-
			   chive  inside  the  database. If a single number is
			   given (not a	range),	it may be also a negative num-
			   ber,	 by  which it means counting from the end. For
			   example, -1 means the last archive of the base,  -2
			   the penultimate, etc.

       -b, --base <number> <new_archive_basename>
			   this	 option	allows you to rename the archive base-
			   name	(used when restoring files from	it). Here too,
			   the number may be also a negative number.

       -p, --path <number> <path>
			   this	 option	allows you to change the location of a
			   given archive (used when restoring files from  it).
			   Here	too, a negative	number is allowed.

       -o, --options [list of option to	pass to	dar]
			   Specify  the	 option	 to use	when calling dar. Each
			   call	erases the previous setting. Possible dar  op-
			   tions  are  all the available ones except "-x"  and
			   simple arguments (the [list of path]) which will be
			   added by dar_manager	itself.

       -d, --dar [<path>]  Set	the  path to dar. If no	argument is given, dar
			   is expected to be located in	the PATH

       -r, --restore [list of files or directories to restore]
			   dar_manager will restore all	(an  only)  the	 given
			   files or directories, in their latest recorded sta-
			   tus,	or before the date give	thanks to the  -e  op-
			   tion. If a directory	is given all subfiles and sub-
			   directories are restored recursively	in it. You can
			   filter out some files from this recursion thanks to
			   dar usual filtering option (see dar man  page)  you
			   can	provide	beside -r using	the -e option (see be-
			   low). Dar_manager lead dar to remove	any file, if a
			   file	 is  stored as having been removed at date re-
			   quested for restoration, it is simply not restored.
			   Thus	 if you	restore	in an empty directory you will
			   get all the files and directories you  provided  to
			   dar_manager	in the state they have at the date you
			   asked. File that did	not existed at that time  will
			   not	be  restored.  However you can restore over an
			   existing installation, dar will then	warn  you  be-
			   fore	 overwriting  files (see -w and	-n options for
			   dar)	but will still	not  remove  files  that  were
			   recorded  removed from a previous archive of	refer-
			   ence.  Note that files listed after -r option, must
			   never  have an absolute path. They will be restored
			   under the directory specified with -R option	of dar
			   (passed  to	dar using -o or	-e options), or	by de-
			   fault, under	the current directory.

       -w, --when <date>   alters the -r option	behavior: still	 restores  the
			   files in the	most recent version available but only
			   before the given  date  (versions  of  more	recent
			   dates  are  ignored).  The  <date> must respect the
			   following	       format		[	     [
			   [year/]month/]day-]hour:minute[:second].  For exam-
			   ple "22:10" for 10 PM past 10 or the	 current  day,
			   "7-22:10"  for 10 PM	past 10	the 7th	of the current
			   month, "3/07-22:10" for the 7th of march  at	 22:10
			   of the current year,	"2002/03/31-14:00:00" the date
			   of the first	dar's release ;-). The given date must
			   be  in  the past, of	course,	and is compared	to the
			   "last modification" date of the saved files and not
			   to  the date	at which archives have been done. Thus
			   if a	file has been changed long ago but saved in  a
			   recent  (full)  archive,  it	 will  be  elected for
			   restoration even for	dates older than the  creation
			   of the archive. In the other	way, a file saved long
			   time	ago with a mtime that was set to a date	in the
			   future  will	 not  be  elected for restoration when
			   giving the date at which was	done the archive.

       -e, --extra <options>
			   pass	some more options to dar. While	the -o options
			   takes all that follows on the command line as argu-
			   ment	to pass	to dar and write these	in  the	 data-
			   base, the -e	option does not	alter the database and
			   has only one	argument. In other words, if you  need
			   to  pass  several options to	dar through the	use of
			   the -e option,  you	need  to  use  quotes  (simple
			   quotes  '  or double	quotes ") to enclose these op-
			   tions. Example:

		     dar_manager -B database.dmd -e "-w	-v -p -b -r -H	1"  -r
		     some/files

	      while using -o option you	must not use quotes:

		     dar_manager -B database.dmd -o -w -v -p -b	-r -H 1

       -u, --used <number> list	 the files that	the given archive owns as last
			   version available. Thus when	no file	is listed, the
			   given  archive  is  no more useful in database, and
			   can be removed safely (-D option). If  <number>  is
			   zero,  all  available  file	are listed, the	status
			   provided for	each file present in the  database  is
			   the	most  recent  status. A	negative number	is al-
			   lowed for this option (see -D option	for details).

       -f, --file <file>   displays in which archive the given file is	saved,
			   and	what  are  the	modification  date (mtime) and
			   change date (ctime).

       -s, --stats	   show	the number of most recent  files  by  archive.
			   This	helps to determine which archive can be	safely
			   removed from	the database.

       -m, --move <number> <number>
			   changes the order of	archives in the	database.  The
			   first  number is the	number of the archive to move,
			   while the second is the  place  where  it  must  be
			   shifted to.

			   Archive  order  is  important:  An old archive must
			   have	a smaller index	than a recent archive. If  you
			   add	archive	 to  a database	in the order they have
			   been	created	all should be fine. Else if a file has
			   a  more recent version in an	archive	which index is
			   smaller, a warning will be issued (unless  -ai  op-
			   tion	 is  used).  This  can occur if	by mistake you
			   added an archive to the database in the wrong order
			   (old	 archive  added	 after	a recent one), in that
			   case	simply using the -m option will	 let  you  fix
			   this	mistake. If instead the	problem	is relative to
			   a single file (or a small set of file), you	should
			   wonder  why this file has its modification date al-
			   tered in a way that it pretends to  be  older  than
			   its	really is. Checking for	the signs of a rootkit
			   may be a good idea.

       -c, --check	   check the database consistency, in  particular  the
			   date	 ordering  is  verified	and warning are	issued
			   for each file having	more recent version located in
			   an  archive	with  a	smaller	index inside the data-
			   base. -ai option makes -c option useless.

       -N, --ignore-options-in-base
			   Do not use the  options  stored  in	database  when
			   calling  dar	 for  restoration. This	option is only
			   useful while	restoring files	from dar_manager,  ei-
			   ther	directly (-r option) or	using a	batch file (-@
			   option, see below).

       -k, --ignore-when-removed
			   By default, dar_manager does	not ask	dar to restore
			   file	 that  have been removed at the	requested date
			   (or in the latest state available). This is	useful
			   for	example	to restore a directory in the state it
			   has at a given date (only  files  that  existed  at
			   that	 time  are restored). However when you want to
			   restore a file that has been	destroyed by accident,
			   you	need to	use -k option so you don't have	to de-
			   termine at which date that file existed  to	be  be
			   able	to ask dar_manager to restore that file	in the
			   state it had	before that date. In other  words,  -k
			   option  gives  a  behavior  of dar_manager backward
			   compatible with dar_manager released	beside version
			   2.3.x of dar.

       -ai, --alter=ignore-order
			   avoid  dar_manager to issue a warning for each file
			   not following a chronological order of modification
			   date	 when  the  archive  number in the database is
			   growing.

       -@, --batch <filename>
			   allows you to do  several  operations  on  a	 given
			   database.  All  operations  are defined in the pro-
			   vided <filename> and	refer to the same database  as
			   defined  by	the  -B	 switch	 on command line. This
			   batch file, must thus not contain neither  -B,  -C,
			   -i or -ai option (-ai are global to the batch oper-
			   ation). The batch file expected layout is one  com-
			   mand	 per  line, thus several arguments (like -l -v
			   for example)	may take place on a given line of  the
			   file	(-v can	be found both on command line for ver-
			   bose	output about the  batch	 operation  steps,  as
			   well	as inside the batch file for verbose output of
			   a particular	batched	command). Arguments are	 sepa-
			   rated  by  spaces  or  tabs,	 other	characters are
			   passed as-is. In consequence, you should only  need
			   to  use  quotes (using " or ') if you intend	to use
			   an argument containing space. Last, comments	may be
			   placed  on  any  line beginning by a	hash character
			   (#).

       -Q		   Do not display  any	message	 on  stderr  when  not
			   launched from a terminal (for example when launched
			   from	an at job or crontab). Remains that any	 ques-
			   tion	 to  the  user	will be	assumed	a 'no' answer,
			   which most of the time will abort the program.

       -v, --verbose	   displays additional information about  what	it  is
			   doing.

       -h, --help	   display help	usage

       -V, --version	   display software version

EXIT CODES
       dar_manager exits with the following code:

       0	 Operation successful.

       1	 see dar manual	page for signification

       2	 see dar manual	page for signification

       3	 see dar manual	page for signification

       5	 see dar manual	page for signification

       7	 see dar manual	page for signification

       8	 see dar manual	page for signification

       11 and above
		 dar
		  called  from	dar_manager  has  exited with non zero status.
		 Subtract 10 to	this exit code to get dar's exit code.

SIGNALS
       dar_manager acts	like dar (see dar man page for list of signals),  upon
       certain signal reception	dar aborts cleanly

SEE ALSO
       dar(1), dar_xform(1), dar_slave(1), dar_cp(1), dar_split(1)

LIMITATIONS
       at  most	 65534	archives  can  be  compiled in a given database, which
       should be enough	for most users.	Dar_manager does not support encrypted
       archives	 for  now and archive cannot neither be	encrypted. See the FAQ
       for a workaround.

KNOWN BUGS
       http://sourceforge.net/p/dar/bugs/

AUTHOR
       http://dar.linux.free.fr/
       Denis Corbin
       France
       Europe

3rd Berkeley Distribution	May 17th, 2015			DAR_MANAGER(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXIT CODES | SIGNALS | SEE ALSO | LIMITATIONS | KNOWN BUGS | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=dar_manager&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help