Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
cvsd.conf(5)		    System Manager's Manual		  cvsd.conf(5)

NAME
       cvsd.conf - configuration file for cvsd.

DESCRIPTION
       The  file  cvsd.conf contains the configuration information for running
       `cvsd' (see cvsd(8) ).  The file	contains options, one  on  each	 line,
       specifying the workings of cvsd.

OPTIONS
       RootJail	path
	      This specifies the location of the chroot	jail cvs should	be run
	      in.    This   directory	should	 be   initialized   with   the
	      cvsd-buildroot  script so	it contains all	the proper directories
	      and  binaries.   If  this	 option	 is   not   present   in   the
	      configuration  file  or  a  value	 of `none' (without quotes) is
	      specified	cvsd will run in the normal file system	root.

       Uid uid
	      This specifies which user	id cvs should be run as.  This can  be
	      a	numerical id or	a symbolic value.  If no uid is	specified cvsd
	      will run under the uid it	is started with.

       Gid gid
	      This specifies which group id cvs	should be run as.  This	can be
	      a	numerical id or	a symbolic value.  If no gid is	specified cvsd
	      will run under the gid it	is started with.

       CvsCommand path
	      This should be set to the	location  where	 the  cvs  command  is
	      located.	Note that if you set up	a RootJail this	is relative to
	      that directory, but should still start with a `/'.   If  you  do
	      not define this a	default	of `/bin/cvs' will be used if a	chroot
	      jail  has	 been  configured  and	otherwise  it  will   be   set
	      `/usr/local/bin/cvs'.

       CvsArgs arg...
	      Additional  arguments  to	 be  passed  to	 the  cvs  command, in
	      addition to the default ones.  You can pass the -R option	to put
	      cvs in read-only mode.  Note that	not all	options	can be used in
	      pserver mode and error messages are not always very friendly.

       Nice num
	      This specifies the nice value (on	most systems ranging from  -20
	      to  20)  where the smaller the number (more negative) the	higher
	      the priority.  If	no value is specified the nice	level  of  the
	      program will not be altered.

       Umask mask
	      This  specifies  a  umask	 used by the cvs pserver when creating
	      files.  Specify as an octal value.  If no	value is specified the
	      default umask of 027 will	be used.

       Limit resource value
	      Limits  use of a certain resource	to the cvs process.  Note that
	      resource limits will be set on the executed cvs command and  not
	      for the daemon.  Resource	may be one of:
	      coredumpsize
		     maixmum filesize of a coredump
	      cputime
		     maximum amount of seconds cputime consumed
	      datasize
		     maximum size of program's data segment
	      filesize
		     maximum size of files created
	      memorylocked
		     maximum amount of locked memory
	      openfiles
		     maximum number of open files (file	descriptors)
	      maxproc
		     maximam number of processes (per user? max. children?)
	      memoryuse
		     maximum size of resident memory
	      stacksize
		     maximum stack size
	      virtmem
		     maximum amount of virtual memory allocated
	      pthreads
		     number of threads that the	process	may create
	      Note  that  not  all systems may support all resources specified
	      here.  If	 no  limits  are  defined  no  extra  limits  will  be
	      enforced.	  If the system	already	specified limits for processes
	      it may not be possible to	broaden	the limits.
	      A	value (resource	limit) that is a size can be specified with  a
	      suffix  of  `b'  (bytes),	 `k'  (1024  bytes)  or	`m' (1024*1024
	      bytes), where `k'	is default.
	      Plain number values can also have	the `k'	and `m'	suffixes,  but
	      the default is just the plain number.
	      Time  values  can	 be  formatted as `mm:ss' or have a `m'	or `s'
	      suffix where `s' is default.

       PidFile file
	      This specifies the location the process  id  of  the  daemon  is
	      written.	 If  no	 PidFile  is  specified	 the  pid  will	not be
	      written.	/var/run/cvsd.pid is a good location for a pidfile.

       Listen address port
	      This options specifies which addresses  and  ports  cvsd	should
	      listen  on  for  connections.  The address value can be `*' (for
	      binding all addresses) or	a symbolic (host name),	dotted quad or
	      ipv6  address.  The port value can be a numeric port number or a
	      well known service (`cvspserver').  This option can be  supplied
	      multiple	times.	The address and	port fields can	be combined in
	      the usual	 ways  by  separating  them  with  a  `:'  or  a  `.',
	      optionally  surrounding the address part by square brackets (`['
	      and `]').
	      Some examples:
		  # listen on all interfaces and all protocols on port 2401
		  Listen * 2401
		  # listen on IPv6 port	100
		  Listen :: 100
		  # listen on localhost
		  Listen localhost cvspserver
		  # listen on an ipv6 address
		  Listen [fe80::2a0:d2ff:fea5:e9f5]:2401

       MaxConnections num
	      This specifies the maximum number	of  connections	 that  can  be
	      handled  simultaneously.	 When  the  value  0  (the default) is
	      supplied no limit	is used.

       Log scheme/file logvelel
	      This option  specifies  the  way	logging	 is  done.   As	 first
	      argument either none, syslog or a	file name beginning with a `/'
	      may be specified.	 The second argument is	optional and specifies
	      the loglevel.  The loglevel may be one of: crit, error, warning,
	      notice,  info  (default)	or  debug.   All  messages  with   the
	      specified	 loglevel  and	higher are logged.  This option	can be
	      supplied multiple	times.	If this	option is omitted syslog  info
	      is assumed.

       Repos path
	      This option specifies which repositories can be used.  The value
	      is passed	as a --allow-root=path parameter  to  cvs.   The  path
	      should  be  relative  to the specified RootJail and should start
	      with a `/'.  This	option can be  supplied	 multiple  times,  but
	      should be	specified at least once.

FILES
       /usr/local/etc/cvsd/cvsd.conf  -	default	location for the configuration
       file
       /var/run/cvsd.pid (or other localtion) -	the file where the process  id
       is saved

SEE ALSO
       cvsd(8)

AUTHOR
       Arthur de Jong <arthur@arthurdejong.org>.

Version	1.0.24			   Jun 2012			  cvsd.conf(5)

NAME | DESCRIPTION | OPTIONS | FILES | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=cvsd.conf&sektion=5&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help