Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
create_bmp_for_circ_in_circ(1) Dr. David Kirkby	create_bmp_for_circ_in_circ(1)

NAME
       create_bmp_for_rect_cen_in_rect - bitmap	generator for rectangular con-
       ductor inside rectangular conductor (part of atlc)

SYNOPSIS
       create_bmp_for_rect_cen_in_rect [options... ] W H w h Er	outfile.bmp

WARNING
       This man	page is	not a complete set of documentation -  the  complexity
       of  the	atlc  project makes man	pages not an ideal way to document it,
       although	out of completeness, man pages are produced.  The  best	 docu-
       mentation  that was current at the time the version was produced	should
       be found	on your	hard drive, usually at
       /usr/local/share/atlc/docs/html-docs/index.html
       although	it might be elsewhere if your system  administrator  chose  to
       install	the  package elsewhere.	Sometimes, errors are corrected	in the
       documentation and placed	at http://atlc.sourceforge.net/	before	a  new
       release	of atlc	is released.  Please, if you notice a problem with the
       documentation - even spelling errors and	typos, please let me know.

DESCRIPTION
       create_bmp_for_rect_cen_in_rect is a pre-processor for atlc, the	finite
       difference  program  that is used to calculate the properties of	a two-
       conductor electrical transmission line of arbitrary cross section.  The
       program create_bmp_for_rect_cen_in_rect is used as a fast way of	gener-
       ating bitmaps (there is no need to use a	graphics program), for a  rec-
       tangular	 conductor placed centrally inside another rectangular conduc-
       tor, like this:

       -----------------------------------------------------  ^
       |						   |  |
       |	    Dielectric,	permittivity=Er		   |  |
       |						   |  |
       |						   |  |
       |						   |  |
       |	     <----------w----------->		   |  |
       |	     ------------------------	^	   |  |
       |	     |			    |	|	   |  |
       |	     |	Metallic conductor  |	|	   |  H
       |	     |	conductor (must	be  |	h	   |  |
       |	     |	in  the	centre)	    |	|	   |  |
       |	     |			    |	|	   |  |
       |	     ------------------------	^	   |  |
       |						   |  |
       |						   |  |
       |						   |  |
       |						   |  |
       |						   |  |
       |						   |  |
       -----------------------------------------------------  |
       <---------------------------W----------------------->

       The parameters 'W' and 'H' and the inner	dimensions of the  outer  con-
       ductor.	 The  outer dimensions of the inner conductor are 'w' and 'h'.
       The inner conductor is assumed be be placed centrally inside the	 outer
       conductor.  The	spaced between the two conductors is filled with a di-
       electric	of relative permittivity Er

       The bitmaps produced by create_bmp_for_rect_cen_in_rect are 24-bit  bit
       colour bitmaps, as required by atlc.

       The  permittivity  of the bitmap, set by	'Er', determine	the colours in
       the bitmap. If Er is 1.0, 2.1, 2.2, 2.33, 2.5, 3.3, 3.335, 4.8 or 10.2,
       then  the colour	corresponding to that permittivity will	be set accord-
       ing to the colours defined in COLOURS below. If Er is not one of	 those
       permittivities, the region of permittivity Er will be set to the	colour
       0xCAFF00.  The program atlc does	not know what these permittivites are,
       so  they	atlc, must be told with	the comand line	option -d, as in exam-
       ple 4 below.

OPTIONS
       -b bitmapsize
       is used to set the size of the bitmap, and so  the  accuracy  to	 which
       atlc  is	 able to calculate the transmission line's properties. The de-
       fault value for 'bitmapsize' is normally	4, although  this  is  set  at
       compile time. The value can be set anywhere from	1 to 15, but more than
       8 is probably not sensible.

       -f outfile
       Set the output filename.	By default, the	bitmap is sent to stdout,  but
       it *must* be sent to a file, with this option, or as described above.

       -v
       Causes create_bmp_for_rect_cen_in_rect to print some data to stdout.

COLOURS
       The 24-bit bitmaps that atlc expects, have 8 bits assigned to represent
       the amount of red, 8 for	blue and 8 for green. Hence there are 256 lev-
       els  of	red,  green  and  blue,	making a total of 256*256*256=16777216
       colours.	 Every one of the possible 16777216  colours  can  be  defined
       precisely  by  the  stating the exact amount of red, green and blue, as
       in:

       red	   = 255,000,000 or 0xff0000
       green	   = 000,255,000 or 0x00ff00
       blue	   = 000,000,255 or 0x0000ff
       black	   = 000,000,000 or 0x000000
       white	   = 255,255,255 or 0xffffff
       Brown	   = 255,000,255 or 0xff00ff
       gray	   = 142,142,142 or 0x8e8e8e

       Some colours, such as pink, turquoise, sandy, brown, gray etc may  mean
       slightly	 different  things  to	different  people. This	is not so with
       atlc, as	the program expects the	colours	below to be EXACTLY defined as
       given. Whether you feel the colour is sandy or yellow is	up to you, but
       if you use it in	your bitmap, then it  either  needs  to	 be  a	colour
       recognised  by  atlc,  or you must define it with a command line	option
       (see OPTIONS and	example	5 below).
       The following conductors	are recognised by atlc:
       red    =	255,000,000 or 0xff0000	is the live conductor.
       green  =	000,255,000 or 0x00ff00	is the grounded	conductor.
       blue   =	000,000,000 or 0x000000	is the negative	conductor

       All bitmaps must	have the live (red) and	 grounded  (green)  conductor.
       The  blue  conductor is not currently supported,	but it will be used to
       indicate	a negative conductor, which will be needed if/when the program
       gets extended to	analyse	directional couplers.

       The following dielectrics are recognised	by atlc	and so are produced by
       create_bmp_for_rect_cen_in_rect.

       white	  255,255,255 or 0xFFFFFF as Er=1.0   (vacuum)
       pink	  255,202,202 or 0xFFCACA as Er=1.0006 (air)
       light blue 130,052,255 or 0x8235Ef as Er=2.1   (PTFE)
       Mid gray	  142,242,142 or 0x8E8E8E as Er=2.2   (duroid 5880)
       mauve	  255.000,255 or 0xFF00FF as  Er=2.33	(polyethylene)	yellow
       255,255,000 or 0xFFFF00 as Er=2.5   (polystyrene)
       sandy	  239,203,027 or 0xEFCC1A as Er=3.3   (PVC)
       brown	  188,127,096 or 0xBC7F60 as Er=3.335 (epoxy resin)
       Turquoise  026,239,179 or 0x1AEFB3 as Er=4.8   (glass PCB)
       Dark gray  142,142,142 or ox696969 as Er=6.15  (duroid 6006)
       L. gray	  240,240,240 or 0xDCDCDC as Er=10.2  (duroid 6010)
       D.  orange   213,130,067	 or 0xD5A04D as	Er=100.0 (mainly for test pur-
       poses)
       If the permittivity is one not in the above list, then those  parts  of
       the image with Er will be set to	0xCAFF00.

EXAMPLES
       Here  are a few examples	of the use of create_bmp_for_rect_cen_in_rect.
       Again,  see  the	 html  documentation  in  atlc-X.Y.Z/docs/html-doc/in-
       dex.html	for more examples.

       1)  In the first	example, there is just a vacuum	dielectric, so Er=1.0.
       The inner of 1x1	inches (or mm, miles etc) is placed  centrally	in  an
       outer with dimensions 3.3 x 3.9 inches.

       % create_bmp_for_rect_cen_in_rect 3.3 3.9 1 1 1 > 1.bmp
       % atlc 1.bmp

       2)  In  this second example, an inner of	15.0 mm	x 5.0 mm is surrounded
       by an outer with	internal dimensions of 71.5 x 60.0 mm. There is	a  ma-
       terial  with  permittivity 2.1 (Er of PTFE) around the inner conductor.
       The output from	create_bmp_for_rect_cen_in_rect	 is  sent  to  a  file
       2.bmp, which is then processed by atlc

       % create_bmp_for_rect_cen_in_rect 71.5 60.0 15.0	5.0 2.1	> 2.bmp
       % atlc 2.bmp

       3)  In  example 3, the bitmap is	made larger, to	increase accuracy, but
       otherwise  this	is  identical  to  the	 second	  example.    %	  cre-
       ate_bmp_for_rect_cen_in_rect -b7	71.5 60	15 5 2.1 > 3.bmp
       % atlc 3.bmp

       In    the    fourth    example,	  instead    of	   re-directing	  cre-
       ate_bmp_for_rect_cen_in_rect's output to	a file with the	> sign,	it  is
       done using the -f option.
       % create_bmp_for_rect_cen_in_rect -f 4.bmp 61.5 28.1 5 22 2.1
       % atlc 4.bmp

SEE ALSO
       atlc(1)	create_bmp_for_circ_in_circ(1)	create_bmp_for_circ_in_rect(1)
       create_bmp_for_microstrip_coupler(1)				  cre-
       ate_bmp_for_rect_cen_in_rect_coupler(1)	create_bmp_for_rect_in_circ(1)
       create_bmp_for_rect_in_rect(1) create_bmp_for_stripline_coupler(1) cre-
       ate_bmp_for_symmetrical_stripline(1) design_coupler(1) find_optimal_di-
       mensions_for_microstrip_coupler(1) readbin(1)

       http://atlc.sourceforge.net		  - Home page
       http://sourceforge.net/projects/atlc	  - Download area
       atlc-X.Y.Z/docs/html-docs/index.html	  - HTML docs
       atlc-X.Y.Z/docs/qex-december-1996/atlc.pdf - theory paper
       atlc-X.Y.Z/examples			  - examples

10th Sept 2003			  atlc-4.4.2	create_bmp_for_circ_in_circ(1)

NAME | SYNOPSIS | WARNING | DESCRIPTION | OPTIONS | COLOURS | EXAMPLES | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=create_bmp_for_rect_cen_in_rect&sektion=1&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help