Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
COAP_RECOVERY(3)		libcoap	Manual		      COAP_RECOVERY(3)

NAME
       coap_recovery, coap_session_set_max_retransmit,
       coap_session_set_ack_timeout, coap_session_set_ack_random_factor,
       coap_session_get_max_transmit, coap_session_get_ack_timeout,
       coap_session_get_ack_random_factor, coap_debug_set_packet_loss -	Work
       with CoAP packet	transmissions

SYNOPSIS
       #include	<coap2/coap.h>

       void coap_session_set_max_retransmit(coap_session_t *session, unsigned
       int value);

       void coap_session_set_ack_timeout(coap_session_t	*session,
       coap_fixed_point_t value);

       void coap_session_set_ack_random_factor(coap_session_t *session,
       coap_fixed_point_t value);

       unsigned	int coap_session_get_max_transmit(coap_session_t *session);

       coap_fixed_point_t coap_session_get_ack_timeout(coap_session_t
       *session);

       coap_fixed_point_t coap_session_get_ack_random_factor(coap_session_t
       *session);

       int coap_debug_set_packet_loss(const char *loss_level);

       Link with -lcoap-2, -lcoap-2-gnutls, -lcoap-2-openssl or
       -lcoap-2-tinydtls depending on your (D)TLS library type.

DESCRIPTION
       For CoAP	Confirmable messages, it is possible to	define the retry
       counts, repeat rate etc.	for error recovery. Further information	can be
       found in	"RFC7272: 4.2. Messages	Transmitted Reliably".

       It is not recommended that the suggested	default	setting	are changed,
       but there may be	some special requirements that need different values
       and the consequences of changing	these values is	fully understood.

       Changing	the default values for multicast packets is not	supported.

       Some of the parameters or return	values are in fixed point format as
       defined by the coap_fixed_point_t structure as below

	   typedef struct coap_fixed_point_t {
	     uint16_t integer_part;    /* Integer part of fixed	point variable */
	     uint16_t fractional_part; /* Fractional part of fixed point variable
					  1/1000 (3 points) precision */
	   } coap_fixed_point_t;

       The CoAP	message	retry rules are	(with the default values to compute
       the time)

	   1st retransmit after	1 * ack_timeout	* ack_random factor (3 seconds)
	   2nd retransmit after	2 * ack_timeout	* ack_random factor (6 seconds)
	   3rd retransmit after	3 * ack_timeout	* ack_random factor (12	seconds)
	   4th retransmit after	4 * ack_timeout	* ack_random factor (24	seconds)
	   5th retransmit after	5 * ack_timeout	* ack_random factor (48	seconds)

	   As max_transmit (by default)	is 4, then the 5th retransmit does not get sent,
	   but at that point COAP_NACK_TOO_MANY_RETRIES	gets raised in the nack_handler
	   (if defined). Note that the sum of the seconds is 93	matching RFC7252.

       It should be noted that these retries are separate from the DTLS	or TLS
       encrypted session setup retry timeouts. For DTLS, the initial
       requesting packet will get sent max_retransmit times before reporting
       failure.	For TLS	the initial TCP	connection will	timeout	before
       reporting failure.

       It is also possible to set up packet losses, for	both confirmable, and
       non-confirmable messages. This can be used for stress testing packet
       transmission recovery as	well as	application handling of	lossy
       networks.

       The coap_session_set_max_retransmit() function updates the session
       maximum retransmit count	with the new value. The	default	value is 4.

       The coap_session_set_ack_timeout() function updates the session initial
       ack or response timeout with the	new value. The default value is	2.0.

       The coap_session_set_ack_random_factor()	function updates the session
       ack random wait factor, used to randomize re-transmissions, with	the
       new value. The default value is 1.5.

       The coap_session_get_max_retransmit() function returns the current
       session maximum retransmit count.

       The coap_session_get_ack_timeout() function returns the current session
       initial ack or response timeout.

       The coap_session_get_ack_random_factor()	function returns the current
       session ack random wait factor.

       The coap_debug_set_packet_loss()	function is uses to set	the packet
       loss levels as defined in loss_level. loss_level	can be set as a
       percentage from "0%" to "100%". Alternatively, it is possible to
       specify which packets of	a packet sequence are dropped. A definition of
       "1,5-9,11-20,101" means that packets 1, 5 through 9, 11 through 20 and
       101 will	get dropped. A maximum of 10 different packet sets is
       supported. The packet count is reset to 0 when
       coap_debug_set_packet_loss() is called. To remove any packet losses,
       set the loss_level to "0%".

RETURN VALUES
       coap_session_get_max_retransmit(), coap_session_get_ack_timeout() and
       coap_session_get_ack_random_factor() return their respective current
       values.

       coap_debug_set_packet_loss() returns 0 if loss_level does not parse
       correctly, otherwise 1 if successful.

TESTING
       The libcoap recovery/re-transmit	logic will only	work for confirmable
       requests.

       To see what is happening	(other than by sniffing	the network traffic),
       the logging level needs to be set to LOG_DEBUG in the client by using
       coap_set_log_level(LOG_DEBUG) and coap_dtls_set_log_level(LOG_DEBUG).

       The client needs	to be sending confirmable requests during the test.

       The server can either be	stopped, or if packet loss levels are set to
       100% by using coap_debug_set_packet_loss("100%")	when receiving the
       client requests.

       NOTE: If	the server end of the connection is returning ICMP unreachable
       packets after being turned off, you will	get a debug message of the
       form "coap_network_read:	unreachable", so libcoap will stop doing the
       retries.	If this	is the case, then you need to make use of (on the
       server) coap_debug_set_packet_loss("100%") or put in some packet
       filtering to drop the packets.

       The client should then restart transmitting the requests	based on the
       ack_timeout, ack_random_factor and max_retransmit values. The client's
       nack_handler will get called with COAP_NACK_TOO_MANY_RETRIES when the
       confirmable request cannot be successfully transmitted.

FURTHER	INFORMATION
       See "RFC7252: The Constrained Application Protocol (CoAP)" for further
       information.

BUGS
       Please report bugs on the mailing list for libcoap:
       libcoap-developers@lists.sourceforge.net

AUTHORS
       The libcoap project <libcoap-developers@lists.sourceforge.net>

coap_recovery 4.2.1		  08/28/2020		      COAP_RECOVERY(3)

NAME | SYNOPSIS | DESCRIPTION | RETURN VALUES | TESTING | FURTHER INFORMATION | BUGS | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=coap_recovery&sektion=3&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help