Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
chilli-radius(5)	      File Formats Manual	      chilli-radius(5)

NAME
       chilli-radius -	Information about RADIUS in chilli

DESCRIPTION
       chilli  uses  RADIUS  for access	provisioning and statistics. Standards
       and best	practices defined in RFCs are followed as best possible.  How-
       ever,  chilli does take some liberties and bends	the rules in places to
       better adapt to the more	dynamic	application of captive portals.

       See http://coova.org/wiki/index.php/CoovaChilli/RADIUS for details.

ATTRIBUTES
       The RADIUS Attributes used by chilli and	a short	description:

       User-name (1)
	      Full username as entered by the user.

       User-Password (2)
	      Used for UAM as alternative to CHAP-Password and CHAP-Challenge.

       CHAP-Password (3)
	      Used for UAM CHAP	Authentication

       CHAP-Challenge (60)
	      Used for UAM CHAP	Authentication

       EAP-Message (79)
	      Used for WPA Authentication

       NAS-IP-Address (4)
	      IP address of Chilli (set	by the ''nasip''  or  ''radiuslisten''
	      option, and otherwise "0.0.0.0")

       Service-Type (6)
	      Set  to  Login  (1) for normal authentication requests.  The Ac-
	      cess-Accept message from the  radius  server  for	 configuration
	      management messages must also be set to Administrative-User.

       Framed-IP-Address (8)
	      IP address of the	user, which is configurable during MAC authen-
	      tication in the Access-Accept.

       Filter-ID (11)
	      Filter ID	pass on	to scripts possibly.

       Reply-Message (18)
	      Reason of	reject if present.

       State (24)
	      Sent to chilli in	Access-Accept or Access-Challenge. Used	trans-
	      parently in subsequent Access-Request.

       Class (25)
	      Copied transparently by chilli from Access-Accept	to Accounting-
	      Request.

       Session-Timeout (27)
	      Logout once session timeout is reached (seconds)

       Idle-Timeout (28)
	      Logout once idle timeout is reached (seconds)

       Called-Station-ID (30)
	      Set to the ''nasmac'' option or the MAC address of chilli.

       Calling-Station-ID (31)
	      MAC address of client

       NAS-Identifier (32)
	      Set to radiusnasid option	if present.

       Acct-Status-Type	(40)
	      1=Start, 2=Stop, 3=Interim-Update

       Acct-Input-Octets (42)
	      Number of	octets received	from client.

       Acct-Output-Octets (43)
	      Number of	octets transmitted to client.

       Acct-Session-ID (44)
	      Unique ID	to link	 Access-Request	 and  Accounting-Request  mes-
	      sages.

       Acct-Session-Time (46)
	      Session duration in seconds.

       Acct-Input-Packets (47)
	      Number of	packets	received from client.

       Acct-Output-Packets (48)
	      Number of	packets	transmitted to client.

       Acct-Terminate-Cause (49)
	      1=User-Request,  2=Lost-Carrier, 4=Idle-Timeout, 5=Session-Time-
	      out, 11=NAS-Reboot

       Acct-Input-Gigawords (52)
	      Number  of  times	 the  Acct-Input-Octets	 counter  has  wrapped
	      around.

       Acct-Output-Gigawords (53)
	      Number  of  times	 the  Acct-Output-Octets  counter  has wrapped
	      around.

       NAS-Port-Type (61)
	      19=Wireless-IEEE-802.11

       Message-Authenticator (80)
	      Is always	included in Access-Request. If present	in  Access-Ac-
	      cept,  Access-Challenge  or  Access-reject  chilli will validate
	      that the Message-Authenticator is	correct.

       Acct-Interim-Interval (85)
	      If present in Access-Accept chilli  will	generate  interim  ac-
	      counting records with the	specified interval (seconds).

       WISPr-Location-ID (14122, 1)
	      Location	ID  is	set to the radiuslocationid option if present.
	      Should   be    in	   the	  format:    isocc=<ISO_Country_Code>,
	      cc=<E.164_Country_Code>,	      ac=<E.164_Area_Code>,	  net-
	      work=<ssid/ZONE>

       WISPr-Location-Name (14122, 2)
	      Location	Name  is  set  to  the	radiuslocationname  option  if
	      present. Should be in the	format:	<OPERATOR_NAME>,<LOCATION>

       WISPr-Logoff-URL	(14122,	3)
	      Included in Access-Request to notify the operator	of the log off
	      URL. Defaults to "http://uamlisten:uamport/logoff".

       WISPr-Redirection-URL (14122, 4)
	      If present the client will be redirected to this	URL  once  au-
	      thenticated.  This URL should include a link to WISPr-Logoff-URL
	      in order to enable the client to log off.

       WISPr-Bandwidth-Max-Up (14122, 7)
	      Maximum transmit rate (b/s). Limits the bandwidth	of the connec-
	      tion. Note that this attribute is	specified in bits per second.

       WISPr-Bandwidth-Max-Down	(14122,	8)
	      Maximum  receive rate (b/s). Limits the bandwidth	of the connec-
	      tion. Note that this attribute is	specified in bits per second.

       WISPr-Session-Terminate-Time (14122, 9)
	      The time when the	user should be disconnected in ISO 8601	format
	      (YYYY-MM-DDThh:mm:ssTZD).	 If TZD	is not specified local time is
	      assumed. For example a disconnect	on 18 December 2001 at 7:00 PM
	      UTC would	be specified as	2001-12-18T19:00:00+00:00.

       ChilliSpot-Max-Input-Octets (14559, 1)
	      Maximum  number of octets	the user is allowed to transmit. After
	      this limit has been reached the user will	be disconnected.

       ChilliSpot-Max-Output-Octets (14559, 2)
	      Maximum number of	octets the user	is allowed to  receive.	 After
	      this limit has been reached the user will	be disconnected.

       ChilliSpot-Max-Total-Octets (14559, 3)
	      Maximum total octets the user is allowed to send or receive. Af-
	      ter this limit has been reached the user will be disconnected.

       ChilliSpot-Bandwidth-Max-Up (14559, 4)
	      Maximum bandwidth	up

       ChilliSpot-Bandwidth-Max-Down (14559, 5)
	      Maximum bandwidth	down

       ChilliSpot-Config (14559, 6)
	      Configurations passed between chilli and back-end	as name	 value
	      pairs

       ChilliSpot-Lang (14559, 7)
	      Language selected	in user	interface

       ChilliSpot-Version (14559, 8)
	      Version of Chilli	sending	this AccessRequest

       MS-MPPE-Send-Key	(311,16)
	      Used for WPA

       MS-MPPE-Recv-Key	(311,17)
	      Used for WPA

SEE ALSO
       chilli(8) chilli.conf(5)	chilli_radconfig(1)

NOTES
       See  http://coova.org/ for further documentation	and community support.
       The original ChilliSpot project homepage	is/was at www.chillispot.org.

AUTHORS
       Copyright (C) 2006-2007 David Bird <david@coova.com>,  CoovaChilli  and
       ChilliSpot  are	licensed under the Gnu Public License.	All rights re-
       served.

				  August 2007		      chilli-radius(5)

NAME | DESCRIPTION | ATTRIBUTES | SEE ALSO | NOTES | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=chilli-radius&sektion=5&manpath=FreeBSD+12.1-RELEASE+and+Ports>

home | help