Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
cclive(1)			 cclive	manual			     cclive(1)

NAME
       cclive -	media download tool

SYNOPSIS
       cclive [options]	[url | file...]

DESCRIPTION
       cclive is a tool	for downloading	media from YouTube and similar
       websites. It has	a low memory footprint compared	to other existing
       tools.

OPTIONS
       Unless an arg is	specified in the command line, cclive reads from the
       stdin. The command line args may	be either URLs or files	to read.  If
       cclive reads from either	stdin or files,	it expects each	URL to be
       separated by a newline or whitespace character.

   --version
       Print version and exit.

   --help
       Print help and exit.

   --license
       Print license and exit.

   --support
       Print supported hosts and exit.

   --verbose-libcurl
       Turn on libcurl verbose output.

   -q, --quiet
       Turn off	all output to stdout and stderr	with the exception of
       "--verbose-libcurl", if enabled,	libcurl	will continue to print
       messages	to stderr.

   -b, --background
       Go to background	after startup. Output will be written to the file
       specified with "--log-file".

   -F, --query-formats
       Query available formats to the URL. The returned	array is created from
       the data	returned by the	server.	You can	use the	format strings in this
       array with "--format".

       The available formats are determined by the libquvi script responsible
       for parsing the media details.

       See also	"EXAMPLES", "--format" and "--prefer-format".

   -f, --format	arg (=default)
       Download	the format arg of the media. The arg may also be "default",
       "best", "help" or "list". Note, however,	that the "list"	and the	"help"
       are deprecated and will be removed in the later versions	of cclive.
       The arg value is	used with all of the URLs fed to cclive.

       If the arg is "best", the libquvi script	responsible for	parsing	the
       media details will determine the	"best" format available	to an URL.

       If the arg is "default" the libquvi script attempts to return an	URL to
       whatever	it deemed to be	the "default" format for the URL.

       The libquvi script will return the "default" format if the arg was
       unrecognized or the requested format was	not available.

       You can find more information about the YouTube specific	"fmt" IDs at:
	<http://en.wikipedia.org/wiki/YouTube#Quality_and_codecs>

       See also	"EXAMPLES", "--query-formats" and "--prefer-format".

   -c, --continue
       Resume partially	downloaded media.

   -W, --overwrite
       Overwrite existing media.

   -O, --output-file arg
       Write media to arg. Overrides "--filename-format".

   -n, --no-download
       Do not download the media, print	details	only.

   -r, --no-resolve
       Do not resolve URL redirections.	If enabled, breaks the compatibility
       with most "shortened" URLs.

   --no-proxy
       Disable use of HTTP proxy. Overrides both "--proxy" and http_proxy
       environment settings.

   --log-file arg (=cclive_log)
       Write log output	to arg.	Ignored	unless used with "--background".
       Overwrites the existing arg file	(if any). See also "--background" and
       "--update-interval".

   --config-file arg (=~/.ccliverc)
       Path to a file to read cclive arguments from.

OPTIONS	- CONFIGURATION
       In addition to the command line,	the configurable options may also be
       read from the configuration file. See "FILES".

   -p, --prefer-format arg
       Download	the specified format of	the media when the pattern matches to
       the media page URL.

       arg is a	string pair of pattern (regular	expression) and	format.	The
       character ':' is	expected to separate these two strings,	e.g.
       "pattern:format".

       "--format" overrides "--prefer-format". cclive accepts multiple
       occurrences of "--prefer-format".

       See also	"EXAMPLES", "--query-formats" and "--format".

   --progressbar arg (=normal)
       Use the progressbar of type arg.	Ignored	with "--background" which will
       always use the "dotline"	type. Possible values:

	normal	(default)
	dotline	(implied by --background)
	simple	(basic)

   --update-interval arg (=1)
       Specify arg progressbar update interval in seconds. Use of decimal
       fractions, e.g. "0.2" or	"1.99",	is acceptable.

   --filename-format arg (="%t.%s")
       How the downloaded media	file should be named.  Each occurence of the
       following specifiers will be replaced in	the arg:

	%t .. Media title
	%i .. Media ID
	%h .. Media host ID (e.g. "vimeo")
	%s .. Media file suffix	(e.g. "flv")

       See also	"--tr".

   --output-dir	arg
       Write downloaded	media to arg directory.

   -t, --tr arg
       Where arg is a pattern (regular expression). "--tr" can be used to
       translate the characters	in the media titles before they	are used in
       the filenames of	the downloaded media. Default is "/(\w|\s)/g".

       cclive accepts multiple occurrences of "--tr". See also "EXAMPLES".

   --exec arg
       Invoke arg after	each successfully finished download. Each occurence of
       the following specifiers	will be	replaced in the	arg:

	%f .. Full path	to the downloaded media	file
	%n .. Name of the downloaded media file
	%t .. Media title (unfiltered)

       The arg is also invoked if the media is fully retrieved already.
       cclive accepts multiple occurrences of "--exec".	See also "EXAMPLES".

   --agent arg (="Mozilla/5.0")
       Identify	cclive as arg to the HTTP servers.

   --proxy arg
       Use arg for HTTP	proxy, e.g. "http://foo:1234". Overrides http_proxy
       environment setting.

   --throttle arg (=0, disabled)
       Do not exceed the transfer rate arg KB/s.

   --connect-timeout arg (=30)
       This option wraps the CURLOPT_CONNECTTIMEOUT (libcurl):

       "Pass a long. It	should contain the maximum time	in seconds that	you
       allow the connection to the server to take.

       This only limits	the connection phase, once it has connected, this
       option is of no more use. Set to	zero to	disable	connection timeout (it
       will then only timeout on the system's internal timeouts). See also the
       CURLOPT_TIMEOUT option."	 -- curl_easy_setopt(3)

   --transfer-timeout arg (=0, disabled)
       This option wraps the CURLOPT_TIMEOUT (libcurl):

       "Pass a long as parameter containing the	maximum	time in	seconds	that
       you allow the libcurl transfer operation	to take.

       Normally, name lookups can take a considerable time and limiting
       operations to less than a few minutes risk aborting perfectly normal
       operations. This	option will cause curl to use the SIGALRM to enable
       time-outing system calls."  -- curl_easy_setopt(3)

   --dns-cache-timeout arg (=60)
       This option wraps the CURLOPT_DNS_CACHE_TIMEOUT (libcurl):

       "Pass a long, this sets the timeout in seconds. Name resolves will be
       kept in memory for this number of seconds. Set to zero to completely
       disable caching,	or set to -1 to	make the cached	entries	remain
       forever.	By default, libcurl caches this	info for 60 seconds.

       The name	resolve	functions of various libc implementations don't	re-
       read name server	information unless explicitly told so (for example, by
       calling res_init(3)). This may cause libcurl to keep using the older
       server even if DHCP has updated the server info,	and this may look like
       a DNS cache issue to the	casual libcurl-app user." --
       curl_easy_setopt(3)

   --max-retries arg (=5, 0=disabled)
       Retry downloading arg times before giving up.

   --retry-wait	arg (=5)
       Wait arg	seconds	before retrying	after a	failed attempt.

DEPRECATED
       These options are deprecated and	will be	removed	in the later versions
       of cclive.

   --regexp arg	(="/(\w|\s)/g")
       Regular expression arg to cleanup the media title before	it is used in
       the filename. Supports "i" (case-insensitive) and "g" (global or	"find
       all").

       Use "--tr" instead.

   --subst arg ...
       Replace matched occurences in the media filename	after applying
       "--filename-format" and "--regexp". To use multiple substitutions,
       separate	each expression	in arg with a whitespace. Supports "i" (case-
       insensitive) and	"g" (global or "find all").

       Supported delimiters

	<> {} () /

       Note

	s/old/new/  .. Invalid
	s/old//new/ .. OK

       Use "--tr" instead.

EXAMPLES
       Always quote the	URLs in	the command line as seen below.	Many URLs
       contain parameters that may otherwise cause the shell to	behave with
       unexpected results.

   cclive "URL"
       Typical use.

   cclive -F "URL"
       Query available formats to the URL. You can then	use one	of the format
       strings from the	returned array with "--format".

   cclive -f best "URL"
       Download	the best available format of the media.

   cclive -p "^.*youtube.*\.com:fmt43_360p" "YOUTUBE_URL"
       Get the fmt43_360p format of YouTube videos whenever possible.

   cclive -n "URL"
       Do not download the media, print	the details only.

   cclive "URL"	-t 's/foo/bar/g'
       Replace any "foo" substrings with "bar" in the media title before using
       it in the output	filename.

   cclive "URL"	-b --log-file foo.log
       Go to background, redirect output to "foo.log".

   pkill -USR1 cclive
       Interrupt the current download of all matching cclive processes.	Causes
       cclive to move onto the next URL	in the queue, if any.

   cclive "URL"	--exec 'echo "%f"' --exec 'vlc "%f"'
       Print path to the downloaded media file using echo(1), open the media
       file in vlc(1).

   More	examples
       You can find more examples in the project wiki, see "WWW" for the URLs.

FILES
   ~/.ccliverc
       Or use "--config-file". See "--help" or "OPTIONS	- CONFIGURATION" for
       the configurable	options.

       Example

	filename-format	= %h_%i_(%t).%s
	proxy =	http://foo:1234
	exec = /usr/bin/vlc %f
	regexp = /(\w|\pL)/g
	progressbar = simple
	prefer-format =	^.*youtube.*\.com:fmt43_360p
	prefer-format =	dailym:best

EXIT STATUS
       cclive exits with 0 on success and >0 if	an (unrecoverable) error
       occurred.

DEBUGGING TIPS
   --verbose-libcurl
       Make libcurl verbose.

WWW
	Home  :	http://cclive.sourceforge.net/
	gitweb:	http://repo.or.cz/w/cclive.git

BACKGROUND
       The name	"clive"	originates from	the words "command line	video
       extraction", the	prepending "c" refers to C or C++. cclive is a rewrite
       of clive(1) in C++.

LICENSE
       cclive is free software,	licensed under the GPLv3+.

AUTHOR
       Toni Gundogdu <legatvs at sign gmail com>.

       Thanks to all those who have contributed	to the project by sending
       patches,	reporting bugs and writing feedback. You know who you are.

0.7.8				  2011-11-26			     cclive(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | OPTIONS - CONFIGURATION | DEPRECATED | EXAMPLES | FILES | EXIT STATUS | DEBUGGING TIPS | WWW | BACKGROUND | LICENSE | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=cclive&manpath=FreeBSD+9.0-RELEASE+and+Ports>

home | help