Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
CCACHE(1)			 ccache	Manual			     CCACHE(1)

NAME
       ccache -	a fast C/C++ compiler cache

SYNOPSIS
       ccache [options]
       ccache compiler [compiler options]
       compiler	[compiler options]		     (via symbolic link)

DESCRIPTION
       ccache is a compiler cache. It speeds up	recompilation by caching the
       result of previous compilations and detecting when the same compilation
       is being	done again. Supported languages	are C, C++, Objective-C	and
       Objective-C++.

       ccache has been carefully written to always produce exactly the same
       compiler	output that you	would get without the cache. The only way you
       should be able to tell that you are using ccache	is the speed.
       Currently known exceptions to this goal are listed under	CAVEATS. If
       you ever	discover an undocumented case where ccache changes the output
       of your compiler, please	let us know.

   Features
       o   Keeps statistics on hits/misses.

       o   Automatic cache size	management.

       o   Can cache compilations that generate	warnings.

       o   Easy	installation.

       o   Low overhead.

       o   Optionally compresses files in the cache to reduce disk space.

   Limitations
       o   Only	knows how to cache the compilation of a	single
	   C/C++/Objective-C/Objective-C++ file. Other types of	compilations
	   (multi-file compilation, linking, etc) will silently	fall back to
	   running the real compiler.

       o   Only	works with GCC and compilers that behave similar enough.

       o   Some	compiler flags are not supported. If such a flag is detected,
	   ccache will silently	fall back to running the real compiler.

RUN MODES
       There are two ways to use ccache. You can either	prefix your
       compilation commands with ccache	or you can let ccache masquerade as
       the compiler by creating	a symbolic link	(named as the compiler)	to
       ccache. The first method	is most	convenient if you just want to try out
       ccache or wish to use it	for some specific projects. The	second method
       is most useful for when you wish	to use ccache for all your
       compilations.

       To use the first	method,	just make sure that ccache is in your PATH.

       To use the symlinks method, do something	like this:

	   cp ccache /usr/local/bin/
	   ln -s ccache	/usr/local/bin/gcc
	   ln -s ccache	/usr/local/bin/g++
	   ln -s ccache	/usr/local/bin/cc
	   ln -s ccache	/usr/local/bin/c++

       And so forth. This will work as long as the directory with symlinks
       comes before the	path to	the compiler (which is usually in /usr/bin).
       After installing	you may	wish to	run "which gcc"	to make	sure that the
       correct link is being used.

	   Warning
	   The technique of letting ccache masquerade as the compiler works
	   well, but currently doesn't interact	well with other	tools that do
	   the same thing. See USING CCACHE WITH OTHER COMPILER	WRAPPERS.

	   Warning
	   Do not use a	hard link, use a symbolic link.	A hard link will cause
	   "interesting" problems.

OPTIONS
       These options only apply	when you invoke	ccache as "ccache". When
       invoked as a compiler (via a symlink as described in the	previous
       section), the normal compiler options apply and you should refer	to the
       compiler's documentation.

       -c, --cleanup
	   Clean up the	cache by removing old cached files until the specified
	   file	number and cache size limits are not exceeded. This also
	   recalculates	the cache file count and size totals. Normally,	there
	   is no need to initiate cleanup manually as ccache keeps the cache
	   below the specified limits at runtime and keeps statistics up to
	   date	on each	compilation. Forcing a cleanup is mostly useful	if you
	   manually modify the cache contents or believe that the cache	size
	   statistics may be inaccurate.

       -C, --clear
	   Clear the entire cache, removing all	cached files, but keeping the
	   configuration file.

       --dump-manifest=PATH
	   Dump	manifest file at PATH in text format. This is only useful when
	   debugging ccache and	its behavior.

       -k, --get-config=KEY
	   Print the value of configuration option KEY.	See CONFIGURATION for
	   more	information.

       --hash-file=PATH
	   Print the hash (in format <MD4>-<size>) of the file at PATH.	This
	   is only useful when debugging ccache	and its	behavior.

       -h, --help
	   Print an options summary page.

       -F, --max-files=N
	   Set the maximum number of files allowed in the cache. Use 0 for no
	   limit. The value is stored in a configuration file in the cache
	   directory and applies to all	future compilations.

       -M, --max-size=SIZE
	   Set the maximum size	of the files stored in the cache.  SIZE	should
	   be a	number followed	by an optional suffix: k, M, G,	T (decimal),
	   Ki, Mi, Gi or Ti (binary). The default suffix is G. Use 0 for no
	   limit. The value is stored in a configuration file in the cache
	   directory and applies to all	future compilations.

       --print-stats
	   Print statistics counter IDs	and corresponding values
	   machine-parsable (tab-separated) format.

       -o, --set-config=KEY=VALUE
	   Set configuration option KEY	to VALUE. See CONFIGURATION for	more
	   information.

       -p, --show-config
	   Print current configuration options and from	where they originate
	   (environment	variable, configuration	file or	compile-time default)
	   in human-readable format.

       -s, --show-stats
	   Print a summary of configuration and	statistics counters in
	   human-readable format.

       -V, --version
	   Print version and copyright information.

       -z, --zero-stats
	   Zero	the cache statistics (but not the configuration	options).

EXTRA OPTIONS
       When run	as a compiler, ccache usually just takes the same command line
       options as the compiler you are using. The only exception to this is
       the option --ccache-skip. That option can be used to tell ccache	to
       avoid interpreting the next option in any way and to pass it along to
       the compiler as-is.

	   Note
	   --ccache-skip currently only	tells ccache not to interpret the next
	   option as a special compiler	option -- the option will still	be
	   included in the direct mode hash.

       The reason this can be important	is that	ccache does need to parse the
       command line and	determine what is an input filename and	what is	a
       compiler	option,	as it needs the	input filename to determine the	name
       of the resulting	object file (among other things). The heuristic	ccache
       uses when parsing the command line is that any argument that exists as
       a file is treated as an input file name.	By using --ccache-skip you can
       force an	option to not be treated as an input file name and instead be
       passed along to the compiler as a command line option.

       Another case where --ccache-skip	can be useful is if ccache interprets
       an option specially but shouldn't, since	the option has another meaning
       for your	compiler than what ccache thinks.

CONFIGURATION
       ccache's	default	behavior can be	overridden by configuration file
       settings, which in turn can be overridden by environment	variables with
       names starting with CCACHE_. ccache normally reads configuration	from
       two files: first	a system-level configuration file and secondly a
       cache-specific configuration file. The priority of configuration
       settings	is as follows (where 1 is highest):

	1. Environment variables.

	2. The cache-specific configuration file _ccachedir_/ccache.conf
	   (typically $HOME/.ccache/ccache.conf).

	3. The system-wide configuration file _sysconfdir_/ccache.conf
	   (typically /etc/ccache.conf or /usr/local/etc/ccache.conf).

	4. Compile-time	defaults.

       As a special case, if the environment variable CCACHE_CONFIGPATH	is
       set, ccache reads configuration from the	specified path instead of the
       default paths.

   Configuration file syntax
       Configuration files are in a simple "key	= value" format, one setting
       per line. Lines starting	with a hash sign are comments. Blank lines are
       ignored,	as is whitespace surrounding keys and values. Example:

	   # Set maximum cache size to 10 GB:
	   max_size = 10G

   Boolean values
       Some settings are boolean values	(i.e. truth values). In	a
       configuration file, such	values must be set to the string true or
       false. For the corresponding environment	variables, the semantics are a
       bit different: a	set environment	variable means "true" (even if set to
       the empty string), the following	case-insensitive negative values are
       considered an error (rather than	surprising the user): 0, false,
       disable and no, and an unset environment	variable means "false".	Each
       boolean environment variable also has a negated form starting with
       CCACHE_NO. For example, CCACHE_COMPRESS can be set to force compression
       and CCACHE_NOCOMPRESS can be set	to force no compression.

   Configuration settings
       Below is	a list of available configuration settings. The	corresponding
       environment variable name is indicated in parentheses after each
       configuration setting key.

       base_dir	(CCACHE_BASEDIR)
	   This	setting	should be an absolute path to a	directory. ccache then
	   rewrites absolute paths into	relative paths before computing	the
	   hash	that identifies	the compilation, but only for paths under the
	   specified directory.	If set to the empty string (which is the
	   default), no	rewriting is done. A typical path to use as the	base
	   directory is	your home directory or another directory that is a
	   parent of your build	directories. Don't use / as the	base directory
	   since that will make	ccache also rewrite paths to system header
	   files, which	doesn't	gain anything.

	   See also the	discussion under COMPILING IN DIFFERENT	DIRECTORIES.

       cache_dir (CCACHE_DIR)
	   This	setting	specifies where	ccache will keep its cached compiler
	   outputs. It will only take effect if	set in the system-wide
	   configuration file or as an environment variable. The default is
	   $HOME/.ccache.

       cache_dir_levels	(CCACHE_NLEVELS)
	   This	setting	allows you to choose the number	of directory levels in
	   the cache directory.	The default is 2. The minimum is 1 and the
	   maximum is 8.

       compiler	(CCACHE_COMPILER or (deprecated) CCACHE_CC)
	   This	setting	can be used to force the name of the compiler to use.
	   If set to the empty string (which is	the default), ccache works it
	   out from the	command	line.

       compiler_check (CCACHE_COMPILERCHECK)
	   By default, ccache includes the modification	time ("mtime") and
	   size	of the compiler	in the hash to ensure that results retrieved
	   from	the cache are accurate.	This setting can be used to select
	   another strategy. Possible values are:

	   content
	       Hash the	content	of the compiler	binary.	This makes ccache very
	       slightly	slower compared	to the mtime setting, but makes	it
	       cope better with	compiler upgrades during a build bootstrapping
	       process.

	   mtime
	       Hash the	compiler's mtime and size, which is fast. This is the
	       default.

	   none
	       Don't hash anything. This may be	good for situations where you
	       can safely use the cached results even though the compiler's
	       mtime or	size has changed (e.g. if the compiler is built	as
	       part of your build system and the compiler's source has not
	       changed,	or if the compiler only	has changes that don't affect
	       code generation). You should only use the none setting if you
	       know what you are doing.

	   string:value
	       Use value as the	string to calculate hash from. This can	be the
	       compiler	revision number	you retrieved earlier and set here via
	       environment variable.

	   a command string
	       Hash the	standard output	and standard error output of the
	       specified command. The string will be split on whitespace to
	       find out	the command and	arguments to run. No other
	       interpretation of the command string will be done, except that
	       the special word	%compiler% will	be replaced with the path to
	       the compiler. Several commands can be specified with semicolon
	       as separator. Examples:

		   %compiler% -v

		   %compiler% -dumpmachine; %compiler% -dumpversion

	       You should make sure that the specified command is as fast as
	       possible	since it will be run once for each ccache invocation.

	       Identifying the compiler	using a	command	is useful if you want
	       to avoid	cache misses when the compiler has been	rebuilt	but
	       not changed.

	       Another case is when the	compiler (as seen by ccache) actually
	       isn't the real compiler but another compiler wrapper -- in that
	       case, the default mtime method will hash	the mtime and size of
	       the other compiler wrapper, which means that ccache won't be
	       able to detect a	compiler upgrade. Using	a suitable command to
	       identify	the compiler is	thus safer, but	it's also slower, so
	       you should consider continue using the mtime method in
	       combination with	the prefix_command setting if possible.	See
	       USING CCACHE WITH OTHER COMPILER	WRAPPERS.

       compression (CCACHE_COMPRESS or CCACHE_NOCOMPRESS, see Boolean values
       above)
	   If true, ccache will	compress object	files and other	compiler
	   output it puts in the cache.	However, this setting has no effect on
	   how files are retrieved from	the cache; compressed and uncompressed
	   results will	still be usable	regardless of this setting. The
	   default is false.

       compression_level (CCACHE_COMPRESSLEVEL)
	   This	setting	determines the level at	which ccache will compress
	   object files. It only has effect if compression is enabled. The
	   value defaults to 6,	and must be no lower than 1 (fastest, worst
	   compression)	and no higher than 9 (slowest, best compression).

       cpp_extension (CCACHE_EXTENSION)
	   This	setting	can be used to force a certain extension for the
	   intermediate	preprocessed file. The default is to automatically
	   determine the extension to use for intermediate preprocessor	files
	   based on the	type of	file being compiled, but that sometimes
	   doesn't work. For example, when using the "aCC" compiler on HP-UX,
	   set the cpp extension to i.

       debug (CCACHE_DEBUG or CCACHE_NODEBUG, see Boolean values above)
	   If true, enable the debug mode. The debug mode creates per-object
	   debug files that are	helpful	when debugging unexpected cache
	   misses. Note	however	that ccache performance	will be	reduced
	   slightly. See debugging for more information. The default is	false.

       depend_mode (CCACHE_DEPEND or CCACHE_NODEPEND, see Boolean values
       above)
	   If true, the	depend mode will be used. The default is false.	See
	   THE DEPEND MODE.

       direct_mode (CCACHE_DIRECT or CCACHE_NODIRECT, see Boolean values
       above)
	   If true, the	direct mode will be used. The default is true. See THE
	   DIRECT MODE.

       disable (CCACHE_DISABLE or CCACHE_NODISABLE, see	Boolean	values above)
	   When	true, ccache will just call the	real compiler, bypassing the
	   cache completely. The default is false.

       extra_files_to_hash (CCACHE_EXTRAFILES)
	   This	setting	is a list of paths to files that ccache	will include
	   in the the hash sum that identifies the build. The list separator
	   is semicolon	on Windows systems and colon on	other systems.

       hard_link (CCACHE_HARDLINK or CCACHE_NOHARDLINK,	see Boolean values
       above)
	   If true, ccache will	attempt	to use hard links from the cache
	   directory when creating the compiler	output rather than using a
	   file	copy. Hard links are never made	for compressed cache files.
	   This	means that you should not enable compression if	you want to
	   use hard links. The default is false.

	       Warning
	       Do not enable this option unless	you are	aware of the
	       consequences. Using hard	links may be slightly faster in	some
	       situations, but there are several pitfalls since	the resulting
	       object file will	share i-node with the cached object file:

	    1. If the resulting	object file is modified	in any way, the	cached
	       object file will	be modified as well. For instance, if you run
	       strip object.o or echo >object.o, you will corrupt the cache.

	    2. Programs	that rely on modification times	(like "make") can be
	       confused	since ccache updates the cached	files' modification
	       times as	part of	the automatic cache size management. This will
	       affect object files in the build	tree as	well, which can
	       retrigger the linking step even though nothing really has
	       changed.

       hash_dir	(CCACHE_HASHDIR	or CCACHE_NOHASHDIR, see Boolean values	above)
	   If true (which is the default), ccache will include the current
	   working directory (CWD) in the hash that is used to distinguish two
	   compilations	when generating	debug info (compiler option -g with
	   variations).	Exception: The CWD will	not be included	in the hash if
	   base_dir is set (and	matches	the CWD) and the compiler option
	   -fdebug-prefix-map is used. See also	the discussion under COMPILING
	   IN DIFFERENT	DIRECTORIES.

	   The reason for including the	CWD in the hash	by default is to
	   prevent a problem with the storage of the current working directory
	   in the debug	info of	an object file,	which can lead ccache to
	   return a cached object file that has	the working directory in the
	   debug info set incorrectly.

	   You can disable this	setting	to get cache hits when compiling the
	   same	source code in different directories if	you don't mind that
	   CWD in the debug info might be incorrect.

       ignore_headers_in_manifest (CCACHE_IGNOREHEADERS)
	   This	setting	is a list of paths to files (or	directories with
	   headers) that ccache	will not include in the	manifest list that
	   makes up the	direct mode. Note that this can	cause stale cache hits
	   if those headers do indeed change. The list separator is semicolon
	   on Windows systems and colon	on other systems.

       keep_comments_cpp (CCACHE_COMMENTS or CCACHE_NOCOMMENTS,	see Boolean
       values above)
	   If true, ccache will	not discard the	comments before	hashing
	   preprocessor	output.	This can be used to check documentation	with
	   -Wdocumentation.

       limit_multiple (CCACHE_LIMIT_MULTIPLE)
	   Sets	the limit when cleaning	up. Files are deleted (in LRU order)
	   until the levels are	below the limit. The default is	0.8 (= 80%).
	   See AUTOMATIC CLEANUP for more information.

       log_file	(CCACHE_LOGFILE)
	   If set to a file path, ccache will write information	on what	it is
	   doing to the	specified file.	This is	useful for tracking down
	   problems.

       max_files (CCACHE_MAXFILES)
	   This	option specifies the maximum number of files to	keep in	the
	   cache. Use 0	for no limit (which is the default). See also CACHE
	   SIZE	MANAGEMENT.

       max_size	(CCACHE_MAXSIZE)
	   This	option specifies the maximum size of the cache.	Use 0 for no
	   limit. The default value is 5G. Available suffixes: k, M, G,	T
	   (decimal) and Ki, Mi, Gi, Ti	(binary). The default suffix is	G. See
	   also	CACHE SIZE MANAGEMENT.

       path (CCACHE_PATH)
	   If set, ccache will search directories in this list when looking
	   for the real	compiler. The list separator is	semicolon on Windows
	   systems and colon on	other systems. If not set, ccache will look
	   for the first executable matching the compiler name in the normal
	   PATH	that isn't a symbolic link to ccache itself.

       pch_external_checksum (CCACHE_PCH_EXTSUM	or CCACHE_NOPCH_EXTSUM,	see
       Boolean values above)
	   When	this option is set, and	ccache finds a precompiled header
	   file, ccache	will look for a	file with the extension	".sum" added
	   (e.g. "pre.h.gch.sum"), and if found, it will hash this file
	   instead of the precompiled header itself to work around the
	   performance penalty of hashing very large files.

       prefix_command (CCACHE_PREFIX)
	   This	option adds a list of prefixes (separated by space) to the
	   command line	that ccache uses when invoking the compiler. See also
	   USING CCACHE	WITH OTHER COMPILER WRAPPERS.

       prefix_command_cpp (CCACHE_PREFIX_CPP)
	   This	option adds a list of prefixes (separated by space) to the
	   command line	that ccache uses when invoking the preprocessor.

       read_only (CCACHE_READONLY or CCACHE_NOREADONLY,	see Boolean values
       above)
	   If true, ccache will	attempt	to use existing	cached object files,
	   but it will not to try to add anything new to the cache. If you are
	   using this because your ccache directory is read-only, then you
	   need	to set temporary_dir as	otherwise ccache will fail to create
	   temporary files.

       read_only_direct	(CCACHE_READONLY_DIRECT	or CCACHE_NOREADONLY_DIRECT,
       see Boolean values above)
	   Just	like read_only except that ccache will only try	to retrieve
	   results from	the cache using	the direct mode, not the preprocessor
	   mode. See documentation for read_only regarding using a read-only
	   ccache directory.

       recache (CCACHE_RECACHE or CCACHE_NORECACHE, see	Boolean	values above)
	   If true, ccache will	not use	any previously stored result. New
	   results will	still be cached, possibly overwriting any pre-existing
	   results.

       run_second_cpp (CCACHE_CPP2 or CCACHE_NOCPP2, see Boolean values	above)
	   If true, ccache will	first run the preprocessor to preprocess the
	   source code (see THE	PREPROCESSOR MODE) and then on a cache miss
	   run the compiler on the source code to get hold of the object file.
	   This	is the default.

	   If false, ccache will first run preprocessor	to preprocess the
	   source code and then	on a cache miss	run the	compiler on the
	   preprocessed	source code instead of the original source code. This
	   makes cache misses slightly faster since the	source code only has
	   to be preprocessed once. The	downside is that some compilers	won't
	   produce the same result (for	instance diagnostics warnings) when
	   compiling preprocessed source code.

	   A solution to the above mentioned downside is to set	run_second_cpp
	   to false and	pass -fdirectives-only (for GCC) or -frewrite-includes
	   (for	Clang) to the compiler.	This will cause	the compiler to	leave
	   the macros and other	preprocessor information, and only process the
	   #include directives.	When run in this way, the preprocessor
	   arguments will be passed to the compiler since it still has to do
	   some	preprocessing (like macros).

       sloppiness (CCACHE_SLOPPINESS)
	   By default, ccache tries to give as few false cache hits as
	   possible. However, in certain situations it's possible that you
	   know	things that ccache can't take for granted. This	setting	makes
	   it possible to tell ccache to relax some checks in order to
	   increase the	hit rate. The value should be a	comma-separated	string
	   with	options. Available options are:

	   clang_index_store
	       Ignore the Clang	compiler option	-index-store-path and its
	       argument	when computing the manifest hash. This is useful if
	       you use Xcode, which uses an index store	path derived from the
	       local project path. Note	that the index store won't be updated
	       correctly on cache hits if you enable this option.

	   file_macro
	       ccache normally includes	the input file path in the hash	in
	       order to	be able	to produce the correct object file if the
	       source code includes a __FILE__ macro. If you know that
	       __FILE__	isn't used in practise,	or don't care if ccache
	       produces	objects	where __FILE__ is expanded to the wrong	path,
	       you can set sloppiness to file_macro. ccache will then exclude
	       the input file path from	the hash.

	   file_stat_matches
	       ccache normally examines	a file's contents to determine whether
	       it matches the cached version. With this	option set, ccache
	       will consider a file as matching	its cached version if the
	       mtimes and ctimes match.

	   file_stat_matches_ctime
	       Ignore ctimes when file_stat_matches is enabled.	This can be
	       useful when backdating files' mtimes in a controlled way.

	   include_file_ctime
	       By default, ccache also will not	cache a	file if	it includes a
	       header whose ctime is too new. This option disables that	check.

	   include_file_mtime
	       By default, ccache will not cache a file	if it includes a
	       header whose mtime is too new. This option disables that	check.

	   locale
	       ccache includes the environment variables LANG, LC_ALL,
	       LC_CTYPE	and LC_MESSAGES	in the hash by default since they may
	       affect localization of compiler warning messages. Set this
	       option to tell ccache not to do that.

	   pch_defines
	       Be sloppy about #defines	when precompiling a header file. See
	       PRECOMPILED HEADERS for more information.

	   system_headers
	       By default, ccache will also include all	system headers in the
	       manifest. With this option set, ccache will only	include	system
	       headers in the hash but not add the system header files to the
	       list of include files.

	   time_macros
	       Ignore __DATE__ and __TIME__ being present in the source	code.

	   See the discussion under TROUBLESHOOTING for	more information.

       stats (CCACHE_STATS or CCACHE_NOSTATS, see Boolean values above)
	   If true, ccache will	update the statistics counters on each
	   compilation.	The default is true.

       temporary_dir (CCACHE_TEMPDIR)
	   This	setting	specifies where	ccache will put	temporary files. The
	   default is <cache_dir>/tmp.

	       Note
	       In previous versions of ccache, CCACHE_TEMPDIR had to be	on the
	       same filesystem as the CCACHE_DIR path, but this	requirement
	       has been	relaxed.)

       umask (CCACHE_UMASK)
	   This	setting	specifies the umask for	ccache and all child processes
	   (such as the	compiler). This	is mostly useful when you wish to
	   share your cache with other users. Note that	this also affects the
	   file	permissions set	on the object files created from your
	   compilations.

       unify (CCACHE_UNIFY or CCACHE_NOUNIFY, see Boolean values above)
	   If true, ccache will	use a C/C++ unifier when hashing the
	   preprocessor	output if the -g option	is not used. The unifier is
	   slower than a normal	hash, so setting this environment variable
	   loses a little bit of speed,	but it means that ccache can take
	   advantage of	not recompiling	when the changes to the	source code
	   consist of reformatting only. Note that enabling the	unifier
	   changes the hash, so	cached compilations produced when the unifier
	   is enabled cannot be	reused when the	unifier	is disabled, and vice
	   versa. Enabling the unifier may result in incorrect line number
	   information in compiler warning messages and	expansions of the
	   __LINE__ macro.

CACHE SIZE MANAGEMENT
       By default, ccache has a	5 GB limit on the total	size of	files in the
       cache and no limit on the number	of files. You can set different	limits
       using the -M/--max-size and -F/--max-files options. Use ccache
       -s/--show-stats to see the cache	size and the currently configured
       limits (in addition to other various statistics).

       Cleanup can be triggered	in two different ways: automatic and manual.

   Automatic cleanup
       ccache maintains	counters for various statistics	about the cache,
       including the size and number of	all cached files. In order to improve
       performance and reduce issues with concurrent ccache invocations, there
       is one statistics file for each of the sixteen subdirectories in	the
       cache.

       After a new compilation result has been written to the cache, ccache
       will update the size and	file number statistics for the subdirectory
       (one of sixteen)	to which the result was	written. Then, if the size
       counter for said	subdirectory is	greater	than max_size /	16 or the file
       number counter is greater than max_files	/ 16, automatic	cleanup	is
       triggered.

       When automatic cleanup is triggered for a subdirectory in the cache,
       ccache will:

	1. Count all files in the subdirectory and compute their aggregated
	   size.

	2. Remove files	in LRU (least recently used) order until the size is
	   at most limit_multiple * max_size / 16 and the number of files is
	   at most limit_multiple * max_files /	16, where limit_multiple,
	   max_size and	max_files are configuration settings.

	3. Set the size	and file number	counters to match the files that were
	   kept.

       The reason for removing more files than just those needed to not	exceed
       the max limits is that a	cleanup	is a fairly slow operation, so it
       would not be a good idea	to trigger it often, like after	each cache
       miss.

   Manual cleanup
       You can run ccache -c/--cleanup to force	cleanup	of the whole cache,
       i.e. all	of the sixteen subdirectories. This will recalculate the
       statistics counters and make sure that the max_size and max_files
       settings	are not	exceeded. Note that limit_multiple is not taken	into
       account for manual cleanup.

CACHE COMPRESSION
       ccache can optionally compress all files	it puts	into the cache using
       the compression library zlib. While this	may involve a tiny performance
       slowdown, it increases the number of files that fit in the cache. You
       can turn	on compression with the	compression configuration setting and
       you can also tweak the compression level	with compression_level.

CACHE STATISTICS
       ccache -s/--show-stats can show the following statistics:

       +---------------------------+----------------------------+
       |Name			   | Description		|
       +---------------------------+----------------------------+
       |			   |				|
       |autoconf compile/link	   | Uncachable	compilation or	|
       |			   | linking by	an autoconf	|
       |			   | test.			|
       +---------------------------+----------------------------+
       |			   |				|
       |bad compiler arguments	   | Malformed compiler		|
       |			   | argument, e.g. missing a	|
       |			   | value for an option that	|
       |			   | requires an argument or	|
       |			   | failure to	read a file	|
       |			   | specified by an option	|
       |			   | argument.			|
       +---------------------------+----------------------------+
       |			   |				|
       |cache file missing	   | A file was	unexpectedly	|
       |			   | missing from the cache.	|
       |			   | This only happens in rare	|
       |			   | situations, e.g. if one	|
       |			   | ccache instance is	about	|
       |			   | to	get a file from	the	|
       |			   | cache while another	|
       |			   | instance removed the file	|
       |			   | as	part of	cache cleanup.	|
       +---------------------------+----------------------------+
       |			   |				|
       |cache hit (direct)	   | A result was successfully	|
       |			   | found using the direct	|
       |			   | mode.			|
       +---------------------------+----------------------------+
       |			   |				|
       |cache hit (preprocessed)   | A result was successfully	|
       |			   | found using the		|
       |			   | preprocessor mode.		|
       +---------------------------+----------------------------+
       |			   |				|
       |cache miss		   | No	result was found.	|
       +---------------------------+----------------------------+
       |			   |				|
       |cache size		   | Current size of the cache.	|
       +---------------------------+----------------------------+
       |			   |				|
       |called for link		   | The compiler was called	|
       |			   | for linking, not		|
       |			   | compiling.			|
       +---------------------------+----------------------------+
       |			   |				|
       |called for preprocessing   | The compiler was called	|
       |			   | for preprocessing,	not	|
       |			   | compiling.			|
       +---------------------------+----------------------------+
       |			   |				|
       |can't use precompiled	   | Preconditions for using	|
       |header			   | precompiled headers were	|
       |			   | not fulfilled.		|
       +---------------------------+----------------------------+
       |			   |				|
       |ccache internal	error	   | Unexpected	failure, e.g.	|
       |			   | due to problems		|
       |			   | reading/writing the cache.	|
       +---------------------------+----------------------------+
       |			   |				|
       |cleanups performed	   | Number of cleanups		|
       |			   | performed,	either		|
       |			   | implicitly	due to the	|
       |			   | cache size	limit being	|
       |			   | reached or	due to explicit	|
       |			   | ccache -c/--cleanup calls.	|
       +---------------------------+----------------------------+
       |			   |				|
       |compile	failed		   | The compilation failed. No	|
       |			   | result stored in the	|
       |			   | cache.			|
       +---------------------------+----------------------------+
       |			   |				|
       |compiler check failed	   | A compiler	check program	|
       |			   | specified by		|
       |			   | compiler_check		|
       |			   | (CCACHE_COMPILERCHECK)	|
       |			   | failed.			|
       +---------------------------+----------------------------+
       |			   |				|
       |compiler produced empty	   | The compiler's output file	|
       |output			   | (typically	an object file)	|
       |			   | was empty after		|
       |			   | compilation.		|
       +---------------------------+----------------------------+
       |			   |				|
       |compiler produced no	   | The compiler's output file	|
       |output			   | (typically	an object file)	|
       |			   | was missing after		|
       |			   | compilation.		|
       +---------------------------+----------------------------+
       |			   |				|
       |compiler produced stdout   | The compiler wrote	data to	|
       |			   | standard output. This is	|
       |			   | something that compilers	|
       |			   | normally never do,	so	|
       |			   | ccache is not designed to	|
       |			   | store such	output in the	|
       |			   | cache.			|
       +---------------------------+----------------------------+
       |			   |				|
       |couldn't find the compiler | The compiler to execute	|
       |			   | could not be found.	|
       +---------------------------+----------------------------+
       |			   |				|
       |error hashing extra file   | Failure reading a file	|
       |			   | specified by		|
       |			   | extra_files_to_hash	|
       |			   | (CCACHE_EXTRAFILES).	|
       +---------------------------+----------------------------+
       |			   |				|
       |files in cache		   | Current number of files in	|
       |			   | the cache.			|
       +---------------------------+----------------------------+
       |			   |				|
       |multiple source	files	   | The compiler was called to	|
       |			   | compile multiple source	|
       |			   | files in one go. This is	|
       |			   | not supported by ccache.	|
       +---------------------------+----------------------------+
       |			   |				|
       |no input file		   | No	input file was		|
       |			   | specified to the compiler.	|
       +---------------------------+----------------------------+
       |			   |				|
       |output to a non-regular	   | The output	path specified	|
       |file			   | with -o is	not a file	|
       |			   | (e.g. a directory or a	|
       |			   | device node).		|
       +---------------------------+----------------------------+
       |			   |				|
       |output to stdout	   | The compiler was		|
       |			   | instructed	to write its	|
       |			   | output to standard	output	|
       |			   | using -o -. This is not	|
       |			   | supported by ccache.	|
       +---------------------------+----------------------------+
       |			   |				|
       |preprocessor error	   | Preprocessing the source	|
       |			   | code using	the compiler's	|
       |			   | -E	option failed.		|
       +---------------------------+----------------------------+
       |			   |				|
       |stats updated		   | When statistics were	|
       |			   | updated the last time.	|
       +---------------------------+----------------------------+
       |			   |				|
       |stats zeroed		   | When ccache -z was	called	|
       |			   | the last time.		|
       +---------------------------+----------------------------+
       |			   |				|
       |unsupported code directive | Code like the assembler	|
       |			   | .incbin directive was	|
       |			   | found. This is not		|
       |			   | supported by ccache.	|
       +---------------------------+----------------------------+
       |			   |				|
       |unsupported compiler	   | A compiler	option not	|
       |option			   | supported by ccache was	|
       |			   | found.			|
       +---------------------------+----------------------------+
       |			   |				|
       |unsupported source	   | A source language e.g.	|
       |language		   | specified with -x was	|
       |			   | unsupported by ccache.	|
       +---------------------------+----------------------------+

HOW CCACHE WORKS
       The basic idea is to detect when	you are	compiling exactly the same
       code a second time and reuse the	previously produced output. The
       detection is done by hashing different kinds of information that	should
       be unique for the compilation and then using the	hash sum to identify
       the cached output. ccache uses MD4, a very fast cryptographic hash
       algorithm, for the hashing. (MD4	is nowadays too	weak to	be useful in
       cryptographic contexts, but it should be	safe enough to be used to
       identify	recompilations.) On a cache hit, ccache	is able	to supply all
       of the correct compiler outputs (including all warnings,	dependency
       file, etc) from the cache.

       ccache has two ways of gathering	information used to look up results in
       the cache:

       o   the direct mode, where ccache hashes	the source code	and include
	   files directly

       o   the preprocessor mode, where	ccache runs the	preprocessor on	the
	   source code and hashes the result

       The direct mode is generally faster since running the preprocessor has
       some overhead.

       If no previous result is	detected (i.e.,	there is a cache miss) using
       the direct mode,	ccache will fall back to the preprocessor mode unless
       the depend mode is enabled. In the depend mode, ccache never runs the
       preprocessor, not even on cache misses. Read more in THE	DEPEND MODE
       below.

   Common hashed information
       The following information is always included in the hash:

       o   the extension used by the compiler for a file with preprocessor
	   output (normally .i for C code and .ii for C++ code)

       o   the compiler's size and modification	time (or other
	   compiler-specific information specified by the compiler_check
	   setting)

       o   the name of the compiler

       o   the current directory (if the hash_dir setting is enabled)

       o   contents of files specified by the extra_files_to_hash setting (if
	   any)

   The direct mode
       In the direct mode, the hash is formed of the common information	and:

       o   the input source file

       o   the command line options

       Based on	the hash, a data structure called "manifest" is	looked up in
       the cache. The manifest contains:

       o   references to cached	compilation results (object file, dependency
	   file, etc) that were	produced by previous compilations that matched
	   the hash

       o   paths to the	include	files that were	read at	the time the
	   compilation results were stored in the cache

       o   hash	sums of	the include files at the time the compilation results
	   were	stored in the cache

       The current contents of the include files are then hashed and compared
       to the information in the manifest. If there is a match,	ccache knows
       the result of the compilation. If there is no match, ccache falls back
       to running the preprocessor. The	output from the	preprocessor is	parsed
       to find the include files that were read. The paths and hash sums of
       those include files are then stored in the manifest along with
       information about the produced compilation result.

       There is	a catch	with the direct	mode: header files that	were used by
       the compiler are	recorded, but header files that	were not used, but
       would have been used if they existed, are not. So, when ccache checks
       if a result can be taken	from the cache,	it currently can't check if
       the existence of	a new header file should invalidate the	result.	In
       practice, the direct mode is safe to use	in the absolute	majority of
       cases.

       The direct mode will be disabled	if any of the following	holds:

       o   the configuration setting direct_mode is false

       o   a modification time of one of the include files is too new (needed
	   to avoid a race condition)

       o   a compiler option not supported by the direct mode is used:

	   o   a -Wp,X compiler	option other than -Wp,-MD,path,	-Wp,-MMD,path
	       and -Wp,-D_define_

	   o   -Xpreprocessor

       o   the string __TIME__ is present in the source	code

   The preprocessor mode
       In the preprocessor mode, the hash is formed of the common information
       and:

       o   the preprocessor output from	running	the compiler with -E

       o   the command line options except options that	affect include files
	   (-I,	-include, -D, etc; the theory is that these options will
	   change the preprocessor output if they have any effect at all)

       o   any standard	error output generated by the preprocessor

       Based on	the hash, the cached compilation result	can be looked up
       directly	in the cache.

   The depend mode
       If the depend mode is enabled, ccache will not use the preprocessor at
       all. The	hash used to identify results in the cache will	be based on
       the direct mode hash described above plus information about include
       files read from the dependency file generated by	the compiler with -MD
       or -MMD.

       Advantages:

       o   The ccache overhead of a cache miss will be much smaller.

       o   Not running the preprocessor	at all can be good if compilation is
	   performed remotely, for instance when using distcc or similar;
	   ccache then won't make potentially costly preprocessor calls	on the
	   local machine.

       Disadvantages:

       o   The cache hit rate will likely be lower since any change to
	   compiler options or source code will	make the hash different.
	   Compare this	with the default setup where ccache will fall back to
	   the preprocessor mode, which	is tolerant to some types of changes
	   of compiler options and source code changes.

       o   The manifest	entries	will include system header files as well, thus
	   slowing down	cache hits slightly.

       The depend mode will be disabled	if any of the following	holds:

       o   the configuration setting depend_mode is false

       o   the configuration setting run_second_cpp is false

       o   the configuration setting unify is true

       o   the compiler	is not generating dependencies using -MD or -MMD

CACHE DEBUGGING
       To find out what	information ccache actually is hashing,	you can	enable
       the debug mode via the configuration setting debug or by	setting
       CCACHE_DEBUG in the environment.	This can be useful if you are
       investigating why you don't get cache hits. Note	that performance will
       be reduced slightly.

       When the	debug mode is enabled, ccache will create up to	five
       additional files	next to	the object file:

       +-------------------------------+---------------------------+
       |Filename		       | Description		   |
       +-------------------------------+---------------------------+
       |			       |			   |
       |<objectfile>.ccache-input-c    | Binary	input hashed by	   |
       |			       | both the direct mode and  |
       |			       | the preprocessor mode.	   |
       +-------------------------------+---------------------------+
       |			       |			   |
       |<objectfile>.ccache-input-d    | Binary	input only hashed  |
       |			       | by the	direct mode.	   |
       +-------------------------------+---------------------------+
       |			       |			   |
       |<objectfile>.ccache-input-p    | Binary	input only hashed  |
       |			       | by the	preprocessor mode. |
       +-------------------------------+---------------------------+
       |			       |			   |
       |<objectfile>.ccache-input-text | Human-readable	combined   |
       |			       | diffable text version of  |
       |			       | the three files above.	   |
       +-------------------------------+---------------------------+
       |			       |			   |
       |<objectfile>.ccache-log	       | Log for this object file. |
       +-------------------------------+---------------------------+

       In the direct mode, ccache uses the MD4 hash of the ccache-input-c +
       ccache-input-d data (where + means concatenation), while	the
       ccache-input-c +	ccache-input-p data is used in the preprocessor	mode.

       The ccache-input-text file is a combined	text version of	the three
       binary input files. It has three	sections ("COMMON", "DIRECT MODE" and
       "PREPROCESSOR MODE"), which is turn contain annotations that say	what
       kind of data comes next.

       To debug	why you	don't get an expected cache hit	for an object file,
       you can do something like this:

	1. Build with debug mode enabled.

	2. Save	the <objectfile>.ccache-* files.

	3. Build again with debug mode enabled.

	4. Compare <objectfile>.ccache-input-text for the two builds. This
	   together with the <objectfile>.ccache-log files should give you
	   some	clues about what is happening.

COMPILING IN DIFFERENT DIRECTORIES
       Some information	included in the	hash that identifies a unique
       compilation can contain absolute	paths:

       o   The preprocessed source code	may contain absolute paths to include
	   files if the	compiler option	-g is used or if absolute paths	are
	   given to -I and similar compiler options.

       o   Paths specified by compiler options (such as	-I, -MF, etc) on the
	   command line	may be absolute.

       o   The source code file	path may be absolute, and that path may
	   substituted for __FILE__ macros in the source code or included in
	   warnings emitted to standard	error by the preprocessor.

       This means that if you compile the same code in different locations,
       you can't share compilation results between the different build
       directories since you get cache misses because of the absolute build
       directory paths that are	part of	the hash.

       Here's what can be done to enable cache hits between different build
       directories:

       o   If you build	with -g	(or similar) to	add debug information to the
	   object file,	you must either:

	   o   use the -fdebug-prefix-map=old=new option for relocating	debug
	       info to a common	prefix (e.g.  -fdebug-prefix-map=$PWD=.); or

	   o   set hash_dir = false.

       o   If you use absolute paths anywhere on the command line (e.g.	the
	   source code file path or an argument	to compiler options like -I
	   and -MF), you must to set base_dir to an absolute path to a "base
	   directory". ccache will then	rewrite	absolute paths under that
	   directory to	relative before	computing the hash.

PRECOMPILED HEADERS
       ccache has support for GCC's precompiled	headers. However, you have to
       do some things to make it work properly:

       o   You must set	sloppiness to pch_defines,time_macros. The reason is
	   that	ccache can't tell whether __TIME__ or __DATE__ is used when
	   using a precompiled header. Further,	it can't detect	changes	in
	   #defines in the source code because of how preprocessing works in
	   combination with precompiled	headers.

       o   You must either:

	   o   use the -include	compiler option	to include the precompiled
	       header (i.e., don't use #include	in the source code to include
	       the header); or

	   o   (for the	Clang compiler)	use the	-include-pch compiler option
	       to include the PCH file generated from the precompiled header;
	       or

	   o   add the -fpch-preprocess	compiler option	when compiling.

	   If you don't	do this, either	the non-precompiled version of the
	   header file will be used (if	available) or ccache will fall back to
	   running the real compiler and increase the statistics counter
	   "preprocessor error"	(if the	non-precompiled	header file is not
	   available).

SHARING	A CACHE
       A group of developers can increase the cache hit	rate by	sharing	a
       cache directory.	To share a cache without unpleasant side effects, the
       following conditions should to be met:

       o   Use the same	cache directory.

       o   Make	sure that the configuration setting hard_link is false (which
	   is the default).

       o   Make	sure that all users are	in the same group.

       o   Set the configuration setting umask to 002. This ensures that
	   cached files	are accessible to everyone in the group.

       o   Make	sure that all users have write permission in the entire	cache
	   directory (and that you trust all users of the shared cache).

       o   Make	sure that the setgid bit is set	on all directories in the
	   cache. This tells the filesystem to inherit group ownership for new
	   directories.	The following command might be useful for this:

	       find $CCACHE_DIR	-type d	| xargs	chmod g+s

       The reason to avoid the hard link mode is that the hard links cause
       unwanted	side effects, as all links to a	cached file share the file's
       modification timestamp. This results in false dependencies to be
       triggered by timestamp-based build systems whenever another user	links
       to an existing file. Typically, users will see that their libraries and
       binaries	are relinked without reason.

       You may also want to make sure that a base directory is set
       appropriately, as discussed in a	previous section.

SHARING	A CACHE	ON NFS
       It is possible to put the cache directory on an NFS filesystem (or
       similar filesystems), but keep in mind that:

       o   Having the cache on NFS may slow down compilation. Make sure	to do
	   some	benchmarking to	see if it's worth it.

       o   ccache hasn't been tested very thoroughly on	NFS.

       A tip is	to set temporary_dir to	a directory on the local host to avoid
       NFS traffic for temporary files.

USING CCACHE WITH OTHER	COMPILER WRAPPERS
       The recommended way of combining	ccache with another compiler wrapper
       (such as	"distcc") is by	letting	ccache execute the compiler wrapper.
       This is accomplished by defining	the configuration setting
       prefix_command, for example by setting the environment variable
       CCACHE_PREFIX to	the name of the	wrapper	(e.g. distcc). ccache will
       then prefix the command line with the specified command when running
       the compiler. To	specify	several	prefix commands, set prefix_command to
       a colon-separated list of commands.

       Unless you set compiler_check to	a suitable command (see	the
       description of that configuration option), it is	not recommended	to use
       the form	ccache anotherwrapper compiler args as the compilation
       command.	It's also not recommended to use the masquerading technique
       for the other compiler wrapper. The reason is that by default, ccache
       will in both cases hash the mtime and size of the other wrapper instead
       of the real compiler, which means that:

       o   Compiler upgrades will not be detected properly.

       o   The cached results will not be shared between compilations with and
	   without the other wrapper.

       Another minor thing is that if prefix_command is	used, ccache will not
       invoke the other	wrapper	when running the preprocessor, which increases
       performance. You	can use	the prefix_command_cpp configuration setting
       if you also want	to invoke the other wrapper when doing preprocessing
       (normally by adding -E).

CAVEATS
       o   The direct mode fails to pick up new	header files in	some rare
	   scenarios. See THE DIRECT MODE above.

       o   When	run via	ccache,	warning	messages produced by GCC 4.9 and newer
	   will	only be	colored	when the environment variable GCC_COLORS is
	   set.	An alternative to setting GCC_COLORS is	to pass
	   -fdiagnostics-color explicitly when compiling (but then color codes
	   will	also be	present	when redirecting stderr	to a file).

       o   If ccache guesses that the compiler may emit	colored	warnings, then
	   a compilation with stderr referring to a TTY	will be	considered
	   different from a compilation	with a redirected stderr, thus not
	   sharing cache entries. This happens for clang by default and	for
	   GCC when GCC_COLORS is set as mentioned above. If you want to share
	   cache hits, you can pass -f[no-]diagnostics-color (GCC) or
	   -f[no-]color-diagnostics (clang) explicitly when compiling (but
	   then	color codes will be either on or off for both the TTY and the
	   redirected case).

TROUBLESHOOTING
   General
       A general tip for getting information about what	ccache is doing	is to
       enable debug logging by setting the configuration option	debug (or the
       environment variable CCACHE_DEBUG); see debugging for more information.
       Another way of keeping track of what is happening is to check the
       output of ccache	-s.

   Performance
       ccache has been written to perform well out of the box, but sometimes
       you may have to do some adjustments of how you use the compiler and
       ccache in order to improve performance.

       Since ccache works best when I/O	is fast, put the cache directory on a
       fast storage device if possible.	Having lots of free memory so that
       files in	the cache directory stay in the	disk cache is also preferable.

       A good way of monitoring	how well ccache	works is to run	ccache -s
       before and after	your build and then compare the	statistics counters.
       Here are	some common problems and what may be done to increase the hit
       rate:

       o   If "cache hit (preprocessed)" has been incremented instead of
	   "cache hit (direct)", ccache	has fallen back	to preprocessor	mode,
	   which is generally slower. Some possible reasons are:

	   o   The source code has been	modified in such a way that the
	       preprocessor output is not affected.

	   o   Compiler	arguments that are hashed in the direct	mode but not
	       in the preprocessor mode	have changed (-I, -include, -D,	etc)
	       and they	didn't affect the preprocessor output.

	   o   The compiler option -Xpreprocessor or -Wp,X (except
	       -Wp,-MD,path, -Wp,-MMD,path, and	-Wp,-D_define_)	is used.

	   o   This was	the first compilation with a new value of the base
	       directory setting.

	   o   A modification time of one of the include files is too new
	       (created	the same second	as the compilation is being done).
	       This check is made to avoid a race condition. To	fix this,
	       create the include file earlier in the build process, if
	       possible, or set	sloppiness to include_file_mtime if you	are
	       willing to take the risk. (The race condition consists of these
	       events: the preprocessor	is run;	an include file	is modified by
	       someone;	the new	include	file is	hashed by ccache; the real
	       compiler	is run on the preprocessor's output, which contains
	       data from the old header	file; the wrong	object file is stored
	       in the cache.)

	   o   The __TIME__ preprocessor macro is (potentially)	being used.
	       ccache turns off	direct mode if __TIME__	is present in the
	       source code. This is done as a safety measure since the string
	       indicates that a	__TIME__ macro may affect the output. (To be
	       sure, ccache would have to run the preprocessor,	but the	sole
	       point of	the direct mode	is to avoid that.) If you know that
	       __TIME__	isn't used in practise,	or don't care if ccache
	       produces	objects	where __TIME__ is expanded to something	in the
	       past, you can set sloppiness to time_macros.

	   o   The __DATE__ preprocessor macro is (potentially)	being used and
	       the date	has changed. This is similar to	how __TIME__ is
	       handled.	If __DATE__ is present in the source code, ccache
	       hashes the current date in order	to be able to produce the
	       correct object file if the __DATE__ macro affects the output.
	       If you know that	__DATE__ isn't used in practise, or don't care
	       if ccache produces objects where	__DATE__ is expanded to
	       something in the	past, you can set sloppiness to	time_macros.

	   o   The input file path has changed.	ccache normally	includes the
	       input file path in the hash in order to be able to produce the
	       correct object file if the source code includes a __FILE__
	       macro. If you know that __FILE__	isn't used in practise,	or
	       don't care if ccache produces objects where __FILE__ is
	       expanded	to the wrong path, you can set sloppiness to
	       file_macro. ccache will then exclude the	input file path	from
	       the hash.

       o   If "cache miss" has been incremented	even though the	same code has
	   been	compiled and cached before, ccache has either detected that
	   something has changed anyway	or a cleanup has been performed
	   (either explicitly or implicitly when a cache limit has been
	   reached). Some perhaps unobvious things that	may result in a	cache
	   miss	are usage of __TIME__ or __DATE__ macros, or use of
	   automatically generated code	that contains a	timestamp, build
	   counter or other volatile information.

       o   If "multiple	source files" has been incremented, it's an indication
	   that	the compiler has been invoked on several source	code files at
	   once. ccache	doesn't	support	that. Compile the source code files
	   separately if possible.

       o   If "unsupported compiler option" has	been incremented, enable debug
	   logging and check which option was rejected.

       o   If "preprocessor error" has been incremented, one possible reason
	   is that precompiled headers are being used. See PRECOMPILED HEADERS
	   for how to remedy this.

       o   If "can't use precompiled header" has been incremented, see
	   PRECOMPILED HEADERS.

   Corrupt object files
       It should be noted that ccache is susceptible to	general	storage
       problems. If a bad object file sneaks into the cache for	some reason,
       it will of course stay bad. Some	possible reasons for erroneous object
       files are bad hardware (disk drive, disk	controller, memory, etc),
       buggy drivers or	file systems, a	bad prefix_command or compiler
       wrapper.	If this	happens, the easiest way of fixing it is this:

	1. Build so that the bad object	file ends up in	the build tree.

	2. Remove the bad object file from the build tree.

	3. Rebuild with	CCACHE_RECACHE set.

       An alternative is to clear the whole cache with ccache -C if you	don't
       mind losing other cached	results.

       There are no reported issues about ccache producing broken object files
       reproducibly. That doesn't mean it can't	happen,	so if you find a
       repeatable case,	please report it.

MORE INFORMATION
       Credits,	mailing	list information, bug reporting	instructions, source
       code, etc, can be found on ccache's web site: https://ccache.dev.

AUTHOR
       ccache was originally written by	Andrew Tridgell	and is currently
       developed and maintained	by Joel	Rosdahl. See AUTHORS.txt or
       AUTHORS.html and	https://ccache.dev/credits.html	for a list of
       contributors.

ccache 3.7.1			  05/01/2019			     CCACHE(1)

NAME | SYNOPSIS | DESCRIPTION | RUN MODES | OPTIONS | EXTRA OPTIONS | CONFIGURATION | CACHE SIZE MANAGEMENT | CACHE COMPRESSION | CACHE STATISTICS | HOW CCACHE WORKS | CACHE DEBUGGING | COMPILING IN DIFFERENT DIRECTORIES | PRECOMPILED HEADERS | SHARING A CACHE | SHARING A CACHE ON NFS | USING CCACHE WITH OTHER COMPILER WRAPPERS | CAVEATS | TROUBLESHOOTING | MORE INFORMATION | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ccache&sektion=1&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help