Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
bpatch(1)		    General Commands Manual		     bpatch(1)

       bpatch -	binary patch and dump file utility

       bpatch [	-b blksize ] [ -d ] [ -D pagecnt ] [ -e	] [ -p ] [ -r reclen ]
       [ -s ] [	-x ] file...

       Bpatch allows the viewing and/or	modification of	files, independent  of
       file  type  (text, executable, data file, and so	forth).	 Bpatch	allows
       the data	to either be examined at the terminal, dumped to a  print  de-
       vice  or	 file,	or edited in the general manner	of vi(1).  The data in
       the file	is dumped or displayed in pages	of 256 bytes.

       -b blksize  The -b option specifies the blocksize  of  the  data	 file.
		   This	is used	primarily with tapes, and is allowed only with
		   one of the dump (-d or -D) options.	When  this  option  is
		   specified, the file is opened in readonly mode.

       -d	   The	-d option indicates that a dump	(no terminal manipula-
		   tion) is to be performed.  The entire file will  be	dumped
		   to  standard	output.	 No editing of the data	is allowed and
		   the file is opened in readonly mode.	  <DEL>	 interrupts  a
		   continuous  display,	 producing  a  pause after the current
		   record is displayed;	at this	point, a  second  <DEL>	 exits
		   and and other character begins display of the next file.

       -D pagecnt  The -D option is similar to the -d option, with the follow-
		   ing exception: the pagecnt argument limits the dump to  the
		   specified number of pages.

       -e	   The	-e option indicates that the file contains EBCDIC data
		   and should be converted in the  character  portion  of  the

       -p	   Used	 with  one of the dump options,	this option causes the
		   program to pause between pages.  The	program	will then wait
		   for the user	to press either	the return key to continue, or
		   the DEL (or rubout) key to stop the dump.

       -r reclen   The -r option indicates  the	 record	 length	 of  the  data
		   within the dump.  When specified, this option causes	bpatch
		   to place a colon (:)	between	the last byte  of  one	record
		   and the first byte of the next.

       -s	   This	 option	turns on the byte swap option.	It may be tog-
		   gled	dynamically during execution (see  -x  under  Commands

       -x	   This	option specifies the suppression of pages that contain
		   only	NUL characters.	 The result  is	 that  only  the  page
		   header  (name and page number) will appear for such a page.
		   This	option may only	be used	with one of the	dump options.

       file	   Any number of files may be specified.

       All commands are	valid only in the non-dump,  interactive  mode.	  Com-
       mands  may  be  entered in either upper or lower	case.  Commands	of the
       form '^x' indicate that the control character x is to be	entered.

       All commands that request movement within a file	or between files  can-
       not  be	executed  if  any  changes have	been made.  To proceed in this
       case, the user must either enter	the w command, the u command, or the r

       Requesting a next or previous file when there is	no such	will cause the
       issuance	of an error message.

       Note that certain commands allow/require	either some  text  or  numeric
       value.	In those cases,	the user should	type in	characters and end the
       string with either a <cr> or <DEL>.

       ?     Display the help screen.  The help	screen will remain  until  the
	     user  either  redraws  the	 screen	 (see  ^r) or changes pages or

       !     Execute the following command in the shell.

	     Display the previous page.

       <cr>  Display the next page.

       DEL   Quit the program if no changes have been made.

       /     This command initiates an ASCII search.  The text entered on  the
	     command  line  will be used as a search string, and the file will
	     be	searched starting with the current page.  When the  string  is
	     found,  the page containing the string will be displayed.	If the
	     string is not found, an apapropriate message will be displayed.

       ^f    Open a named file whose name will be entered on the command  line
	     and followed either by <cr> or DEL.

       ^n    Open the next file	and display the	first page.

       ^p    Open the previous file and	display	the first page.

       ^q    Quit without writing current changes.

       ^r    Redraw the	screen.

       NNN   Entering a	numeric	value requests that the	specified page be dis-

       -x    Toggle the	command	line option represented	by x:

		   a	 Toggle	display	to ascii (assume data is ascii).

		   e	 Toggle	display	to dbcdic (assume data is ebcdic).

		   s	 Toggle	byte swap.

       a     Edit the ASCII display.  End edits	by pressing the	DEL key.   All
	     other characters will be treated as valid input.  Cursor movement
	     keys (arrows and home) allow movement  within  the	 edit  window.
	     Nonprinting characters are	displayed as dot (.) in	this window.

       f     Display the first page in the current file.

       g     Display  the  page	containing the byte address typed in following
	     the command.

       h     Edit the HEXADECIMAL display.  End	edits  by  pressing  DEL  key.
	     Cursor  movement keys (arrows and home) allow movement within the
	     edit window.  Two keystrokes are required to modify a  byte,  and
	     both must be valid	hexadecimal values (0-9	and a-f).  To cancel a
	     change after typing one character,	press DEL.

       l     Display the last page in the current file.

       q     Quit the file.  A warning will be issued if any changes have been
	     made but not written out.

       r     Reread the	current	page.

       u     Undo all changes to the current page.

       w     Write out the current page.


4th Berkeley Distribution	Benetics Local			     bpatch(1)


Want to link to this manual page? Use this URL:

home | help