Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
bootparams(4)			 File Formats			 bootparams(4)

NAME
       bootparams - boot parameter data	base

SYNOPSIS
       /etc/bootparams

DESCRIPTION
       The  bootparams	file  contains	a list of client entries that diskless
       clients use for booting.	Diskless booting clients retrieve this	infor-
       mation  by  issuing requests to a server	running	the rpc.bootparamd(1M)
       program.	The bootparams file may	be used	 in  conjunction  with	or  in
       place  of  other	 sources  for  the  bootparams	information.  See nss-
       witch.conf(4).

       For each	client the file	contains an entry with the client's name and a
       list  of	 boot  parameter  values  for that client.  Each entry has the
       form:

       clientname    keyword=value...

       The first item of each entry is the host	name of	the  diskless  client.
       You  can	 use  the asterisk ('*') character as a	"wildcard" in place of
       the client name in a single entry.  A wildcard  entry  applies  to  all
       clients for which there is not an entry that specifically names them.

       In  a given entry, the host name	or asterisk is followed	by one or more
       whitespace characters and a series of keyword--value pairs separated by
       whitespace  characters.	There must not be any whitespace within	a key-
       word--value pair.

       Each keyword--value pair	has the	syntax:

       keyword=value

       The preceding form breaks out further as:

       keyword=server:value

       Where server can	be null	and value can be a pathname.

       An example that includes	a server is:

       client1 root=server1:/export/client1/root

       An example where	server is null is:

       client1 rootopts=:vers2

       A minor variation of the	keyword=value syntax is	used  for  the	domain
       keyword.	 Unlike	 the  forms  shown  above,  this syntax	does not use a
       colon. For example:

       client1 domain=bldg1.workco.com

       Entries can span	multiple lines.	Use the	backslash ('\')	 character  as
       the  last  character  of	 a line	to continue the	entry to the following
       line. For multiple-line entries,	you can	split a	line  only  in	places
       where  whitespace  is  allowed. For example, you	can use	a backslash to
       split the following entry between the end of the	path  (root)  and  the
       keyword domain:

       client1 root=server1:/export/client1/root domain=bldg1.workco.com

       In entries that specify a server, server	is the name of the server that
       will provide the	file or	filesystem to the diskless client and value is
       the pathname of the exported file or filesystem on that server.

       In  entries that	use the	domain keyword,	the domain name	specified must
       be the client's domain name.  The algorithm for determining a  client's
       domain  name  is	to first check for a domain keyword in the client-spe-
       cific entry and then in	"wildcard"  entry.   If	 none  is  found,  the
       server's	domain name is used.

       For  the	JumpStart installation of machines that	do not have video dis-
       plays, use the term keyword to identify the terminal type of  the  boot
       server.	Terminal types are listed in /usr/share/lib/terminfo (see ter-
       minfo(4)).

       An entry	with the ns keyword associates a server	(a name	server)	 with,
       instead	of  a  pathname,  a specific name service (NIS+, NIS, or none)
       and, if that server is not on a local subnet,  the  netmask  needed  to
       reach it. For example:

       ns=hoot:nisplus(255.255.255.0)

       An  ns entry forces sysidtool(1M) to use	the specified name service. By
       default,	sysidtool uses NIS+ in preference to NIS if  it	 can  find  an
       NIS+ server for the system's domain on the subnet. An ns	entry might be
       necessary if you	are trying to set up a hands-off installation,	or  if
       the name	server is on a different subnet, which is common with NIS+.

       If  an  ns  keyword is not used,	sysidtool uses broadcast to attempt to
       bind to either a	NIS+ or	NIS server. If a name server is	not on the lo-
       cal  subnet,  which is possible for NIS+, the bind will fail, automatic
       configuration of	the name service will fail, and	an interactive	screen
       is displayed, prompting the user	to specify the name service.

       The ns keyword can be set in add_install_client or by Host Manager.

EXAMPLES
       Example 1: Sample bootparams Entry

       Here is an example of an	entry in the bootparams	file:

	    client1 root=server1:/export/client1/root rootopts=:vers=2 \
		 domain=bldg1.workco.com
	    client2 root=server2:/export/client2/root ns=:nis
	    client3 root=server2:/export/client3/root ns=watson:
	    client4 root=server2:/export/client4/root \
		 ns=mach:nisplus(255.255.255.0)

       Example 2: Sample Entry for JumpStart

       The  following  is  an  example	of an entry that might be used for the
       JumpStart installation of diskless clients that do not have displays.

       mozart root=haydn:/export/install/sparc/os/latest/Solaris_9/boot	\
       install=haydn:/export/install/sparc/os/8.1/latest boottype=:in \
       install_config=haydn:/usr/local/share/lib/jump-net \
       ns=otis:nisplus(255.255.255.0) term=:xterms domain=eu.cte.work.com

FILES
       /etc/bootparams

SEE ALSO
       rpc.bootparamd(1M), sysidtool(1M), nsswitch.conf(4)

NOTES
       Solaris diskless	clients	use the	keywords root and rootopts to look  up
       the pathname for	the root filesystem and	the mount options for the root
       filesystem, respectively. These are the only  keywords  meaningful  for
       diskless	booting	clients.  See mount_ufs(1M).

SunOS 5.9			  4 Jan	2002			 bootparams(4)

NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | FILES | SEE ALSO | NOTES

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=bootparams&sektion=4&manpath=SunOS+5.9>

home | help