Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
BOOBMSG(1)		    General Commands Manual		    BOOBMSG(1)

       boobmsg - send and receive message threads

       boobmsg [-dqv] [-b backends] [-cnfs] [command [arguments..]]
       boobmsg [--help]	[--version]

       Console	application  allowing to send messages on various websites and
       to display message threads and contents.

   Supported websites:
       * aum ("Adopte un Mec" French dating website)
       * blogspot (Blog	reader for blogspot. Read-only and without comments.)
       * bnporc	(BNP Paribas)
       * bouygues (Bouygues TA(C)lA(C)com French mobile	phone provider)
       * dlfp (Da Linux	French Page news website)
       * feedly	(handle	the popular RSS	reading	service	Feedly)
       * freemobile (Free Mobile website)
       * guerrillamail (GuerrillaMail temp mailbox)
       * happn (Happn dating mobile application)
       * hds (Histoires	de Sexe	French erotic novels)
       * inrocks (Les Inrocks French news website)
       * lefigaro (Le Figaro French newspaper website)
       * liberation (LibA(C)ration newspaper website)
       * mailinator (mailinator	temp mailbox)
       * minutes20 (20 Minutes French newspaper	website)
       * newsfeed (Loads RSS and Atom feeds from any website)
       * okc (OkCupid)
       * openedx (Discussions on OpenEDX-powered coursewares)
       * phpbb (phpBB forum)
       * playme	(PlayMe	dating mobile application)
       * presseurop (Presseurop	website)
       * reddit	(reddit	website)
       * tapatalk (Tapatalk-compatible sites)
       * taz (Taz newspaper website)
       * tinder	(Tinder	dating mobile application)
       * twitter (twitter website)

	      Launch a debug Python shell

	      Export All threads

       export_thread ID
	      Export the thread	identified by ID

	      Display all threads.

	      Default is limited to 10 results.

       photos ID
	      Display photos of	a profile

	      Post a message to	the specified receivers.
	      Multiple receivers are separated by a comma.

	      If no text is supplied on	command	line, the content  of  message
	      is read on stdin.

       profile ID
	      Display a	profile

       show MESSAGE
	      Read a message

	      Display status information about a backend.

       backends	[ACTION] [BACKEND_NAME]...
	      Select used backends.

	      ACTION is	one of the following (default: list):
	      *	enable	       enable given backends
	      *	disable	       disable given backends
	      *	only	       enable given backends and disable the others
	      *	list	       list backends
	      *	add	       add a backend
	      *	register       register	a new account on a website
	      *	edit	       edit a backend
	      *	remove	       remove a	backend
	      *	list-modules   list modules

       cd [PATH]
	      Follow a path.
	      ".." is a	special	case and goes up one directory.
	      "" is a special case and goes home.

       condition [EXPRESSION | off]
	      If  an  argument	is given, set the condition expression used to
	      filter the results. See CONDITION	section	for more  details  and
	      the expression.
	      If the "off" value is given, conditional filtering is disabled.

	      If no argument is	given, print the current condition expression.

       count [NUMBER | off]
	      If  an  argument	is  given,  set	 the maximum number of results
	      NUMBER must be at	least 1.
	      "off" value disables counting, and allows	infinite searches.

	      If no argument is	given, print the current count value.

       formatter [list | FORMATTER [COMMAND] | option OPTION_NAME [on |	off]]
	      If a FORMATTER is	given, set the formatter to use.
	      You can add a COMMAND to apply the formatter change only to
	      a	given command.

	      If the argument is "list", print the available formatters.

	      If the argument is "option", set the formatter options.
	      Valid options are: header, keys.
	      If on/off	value is given,	set the	value of the option.
	      If not, print the	current	value for the option.

	      If no argument is	given, print the current formatter.

       logging [LEVEL]
	      Set logging level.

	      Availables: debug, info, warning,	error.
	      *	quiet is an alias for error
	      *	default	is an alias for	warning

       ls [-d] [-U] [PATH]
	      List objects in current path.
	      If an argument is	given, list the	specified path.
	      Use -U option to not sort	results. It allows you to use a	 "fast
	      path" to
	      return results as	soon as	possible.
	      Use  -d option to	display	information about a collection (and to
	      display the content of it). It has the same  behavior  than  the
	      known UNIX "ls" command.

	      Default is limited to 40 results.

	      Quit the application.

       select [FIELD_NAME]... |	"$direct" | "$full"
	      If an argument is	given, set the selected	fields.
	      $direct selects all fields loaded	in one http request.
	      $full  selects  all fields using as much http requests as	neces-

	      If no argument is	given, print the currently selected fields.

	      show program's version number and	exit

       -h, --help
	      show this	help message and exit

       -b BACKENDS, --backends=BACKENDS
	      what backend(s) to enable	(comma separated)

       -e EXCLUDE_BACKENDS, --exclude-backends=EXCLUDE_BACKENDS
	      what backend(s) to exclude (comma	separated)

       -I, --insecure
	      do not validate SSL

       --nss  Use NSS instead of OpenSSL

	      Automatically check for updates when a bug in a  module  is  en-

       -E, --accept-empty
	      Send messages with an empty body.

       -t TITLE, --title=TITLE
	      For the "post" command, set a title to message

       -d, --debug
	      display debug messages. Set up it	twice to more verbosity

       -q, --quiet
	      display only error messages

       -v, --verbose
	      display info messages

	      file to save logs

       -a, --save-responses
	      save every response

	      log browser session cookies after	login

       -c CONDITION, --condition=CONDITION
	      filter  result  items to display given a boolean expression. See
	      CONDITION	section	for the	syntax

       -n COUNT, --count=COUNT
	      limit number of results (from each backends)

       -s SELECT, --select=SELECT
	      select result item keys to display (comma	separated)

       -f FORMATTER, --formatter=FORMATTER
	      select output formatter (atom, csv, htmltable, json,  json_line,
	      msg, msglist, multiline, profile,	simple,	table, webkit, xhtml)

	      do not display header

	      do not display item keys

       -O OUTFILE, --outfile=OUTFILE
	      file to export result

       The  -c and --condition is a flexible way to filter and get only	inter-
       esting results. It supports conditions on numerical values, dates,  du-
       rations	and strings. Dates are given in	YYYY-MM-DD or YYYY-MM-DD HH:MM
       format. Durations look like XhYmZs where	X, Y and Z are	integers.  Any
       of  them	 may  be omitted. For instance,	YmZs, XhZs or Ym are accepted.
       The syntax of one expression is "field operator value".	The  field  to
       test is always the left member of the expression.

       The field is a member of	the objects returned by	the command. For exam-
       ple, a bank account has "balance", "coming" or "label" fields.

   The following operators are supported:
       =      Test if object.field is equal to the value.

       !=     Test if object.field is not equal	to the value.

       >      Test if object.field is greater than the value. If  object.field
	      is date, return true if value is before that object.field.

       <      Test  if object.field is less than the value. If object.field is
	      date, return true	if value is after that object.field.

       |      This operator is available only for string fields. It works like
	      the  Unix	standard grep command, and returns True	if the pattern
	      specified	in the value is	in object.field.

   Expression combination
       You can make a expression combinations with the keywords	" AND ", "  OR
       " an " LIMIT ".

       The  LIMIT  keyword can be used to limit	the number of items upon which
       running the expression. LIMIT can only be placed	at the end of the  ex-
       pression	followed by the	number of elements you want.

       boobank ls --condition 'label=Livret A'
       Display only the	"Livret	A" account.

       boobank ls --condition 'balance>10000'
       Display accounts	with a lot of money.

       boobank history account@backend --condition 'label|rewe'
       Get transactions	containing "rewe".

       boobank history account@backend --condition 'date>2013-12-01 AND	date<2013-12-09'
       Get transactions	betweens the 2th December and 8th December 2013.

       boobank history account@backend --condition 'date>2013-12-01 LIMIT 10'
       Get transactions	after the 2th December in the last 10 transactions

       Copyright(C) 2010-2019 Christophe Benz

       For full	copyright information see the COPYING file in the weboob pack-


       Home page:

boobmsg	1.5		       27 February 2019			    BOOBMSG(1)


Want to link to this manual page? Use this URL:

home | help