Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
BGPD(8)				 Version 0.88			       BGPD(8)

NAME
       bgpd - a	BGPv4, BGPv4+, BGPv4- routing engine for use with Zebra

SYNOPSIS
       bgpd [ -dhpPv ] [ -f config-file	] [ -i pid-file	] [ -p bgp-port-number
       ] [ --bgp_port=port-number ] [ -P vty-port-number ]

DESCRIPTION
       bgpd is a routing component that	works with the zebra routing engine.

OPTIONS
       -d, --daemon
	      Runs in daemon mode, forking and exiting from tty.

       -f, --config-file config-file
	      Specifies	the config file	to use for startup. If	not  specified
	      this option will likely default to /usr/local/etc/bgpd.conf.

       -h, --help
	      A	brief message.

       -i, --pid_file pid-file
	      When  bgpd  starts its process idenifier is written to pid-file.
	      The init system uses the recorded	PID to stop or	restart	 bgpd.
	      The likely default is /var/run/bgpd.pid.

       -p, --bgp_port=port
	      Set the port that	bgpd will listen to for	bgp data.

       -P, --vty_port port-number
	      Specify the port that the	bgpd VTY will listen on. This defaults
	      to 2605, as specified in /etc/services.

       -r, --retain
	      When the program terminates, retain routes added by bgpd.

       -v, --version
	      Print the	version	and exit.

COMMANDS
	router zebra  -- (Move routes into kernel table)
	router bgp [AS-NUMBER]

	bgp router-id [BGP-ROUTER-ID]

	network	[NETWORK] area [BGP-AREA-ID]
	no network [NETWORK]

	aggregate-address [NETWORK]

	neighbor [PEER-IP-ADDRESS] remote-as [REMOTE-AS]
	neighbor [PEER-IP-ADDRESS] version [ 4 | 4+ | 4- ]

	neighbor [PEER-IP-ADDRESS] description
	no neighbor [PEER-IP-ADDRESS] description

	neighbor [PEER-IP-ADDRESS] route-map [in | out]
	neighbor [PEER-IP-ADDRESS] distribute-list [in | out]
	neighbor [PEER-IP-ADDRESS] next-hop-self
	neighbor [PEER-IP-ADDRESS] weight [WEIGHT]
	neighbor [PEER-IP-ADDRESS] default-originate
	neighbor [PEER-IP-ADDRESS] ebgp-multihop

	neighbor [PEER-IP-ADDRESS] shutdown
	no neighbor [PEER-IP-ADDRESS] shutdown

	clear ip bgp [PEER-IP-ADDRESS]

	show ip	bgp [NETWORK]
	show ip	bgp reg-exp [AS-REGEXP]
	show ip	bgp summary
	show ip	bgp neighbor [PEER-IP-ADDRESS]
	show ip	bgp route

	show debug

	debug bgp
	debug event
	debug update
	debug keepalive

	no debug event
	no debug update
	no debug keepalive

FILES
       /usr/local/sbin/bgpd
	      The default location of the bgpd binary.

       /usr/local/etc/bgpd.conf
	      The default location of the bgpd config file.

       $(PWD)/bgpd.log
	      If the bgpd process is config'd to output	logs to	a  file,  then
	      you will find this file in the directory where you started bgpd.

WARNING
       This  man  page	is  intended as	a quick	reference for command line op-
       tions, and for config file commands. The	 definitive  document  is  the
       Info file zebra.

DIAGNOSTICS
       The  bgpd  process may log to standard output, to a VTY,	to a log file,
       or through syslog to the	system logs. bgpd supports many	debugging  op-
       tions, see the Info file, or the	source for details.

SEE ALSO
       References to other related man pages:

       ripd(8),	ripngd(8), ospfd(8), ospf6d(8),	zebra(8), vtysh(1)

BUGS
       bgpd  eats bugs for breakfast. If you have food for the maintainers try
       <bug-zebra@gnu.org>

AUTHOR[S]
       See <www.zebra.org>, or the Info	file for an accurate list of authors.

Zebra Beast - BGPD		   July	2000			       BGPD(8)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMANDS | FILES | WARNING | DIAGNOSTICS | SEE ALSO | BUGS | AUTHOR[S]

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=bgpd&sektion=8&manpath=FreeBSD+12.0-RELEASE+and+Ports>

home | help