Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
autopush(1M)		System Administration Commands		  autopush(1M)

NAME
       autopush	- configures lists of automatically pushed STREAMS modules

SYNOPSIS
       autopush	-f filename

       autopush	-g -M major -m minor

       autopush	-r -M major -m minor

DESCRIPTION
       The autopush command configures the list	of modules to be automatically
       pushed onto the stream when a device is opened. It can also be used  to
       remove a	previous setting or get	information on a setting.

OPTIONS
       The following options are supported:

       -f filename     Sets  up	the autopush configuration for each driver ac-
		       cording to the information stored in filename. An auto-
		       push  file  consists  of	 lines of four or more fields,
		       separated by spaces as shown below:

		       major minor last-minor module1 module2 ... module8

		       The first field is a string that	 specifies  the	 major
		       device  name,  as  listed in the	/kernel/drv directory.
		       The next	two fields are integers	that specify the minor
		       device  number and last-minor device number. The	fields
		       following represent the names of	modules. If  minor  is
		       -1,  then all minor devices of a	major driver specified
		       by major	are configured,	and the	value  for  last-minor
		       is  ignored. If last-minor is 0,	then only a single mi-
		       nor device is configured. To configure a	range of minor
		       devices for a particular	major, minor must be less than
		       last-minor.

		       The remaining fields list the names of  modules	to  be
		       automatically pushed onto the stream when opened, along
		       with the	position of an optional	 anchor.  The  maximum
		       number of modules that can be pushed is eight. The mod-
		       ules are	pushed in the order they  are  specified.  The
		       optional	 special character sequence [anchor] indicates
		       that a STREAMS anchor should be placed on the stream at
		       the  module  previously specified in the	list; it is an
		       error to	specify	more than one anchor or	to have	an an-
		       chor first in the list.

			A  nonzero  exit  status indicates that	one or more of
		       the lines in the	specified file failed to complete suc-
		       cessfully.

       -g	       Gets  the current configuration setting of a particular
		       major and minor device number specified with the	-M and
		       -m  options respectively	and displays the autopush mod-
		       ules associated with it.	It will	also return the	start-
		       ing minor device	number if the request corresponds to a
		       setting of a range (as described	with the -f option).

       -m minor	       Specifies the minor device number.

       -M major	       Specifies the major device number.

       -r	       Removes the previous configuration setting of the  par-
		       ticular	major  and  minor device number	specified with
		       the -M and -m options respectively. If  the  values  of
		       major  and minor	correspond to a	previously established
		       setting of  a  range  of	 minor	devices,  where	 minor
		       matches the first minor device number in	the range, the
		       configuration would be removed for the entire range.

EXIT STATUS
       The following exit values are returned:

       0	       Successful completion.

       non-zero	       An error	occurred.

EXAMPLES
       Example 1: Using	the autopush command.

       The following example gets the current configuration settings  for  the
       major  and  minor device	numbers	as indicated and displays the autopush
       modules	associated  with  them	for   the   character-special	device
       /dev/term/a:

       example#	autopush -g -M 29 -m 0
       Major	 Minor	   Lastminor	 Modules
	 29	   0	     1		 ldterm	 ttcompat

FILES
       /etc/iu.ap

ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE	TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

SEE ALSO
       bdconfig(1M),	ttymon(1M),    attributes(5),	ldterm(7M),   sad(7D),
       streamio(7I), ttcompat(7M)

       STREAMS Programming Guide

SunOS 5.10			  26 Mar 1999			  autopush(1M)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXIT STATUS | EXAMPLES | FILES | ATTRIBUTES | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=autopush&sektion=1m&manpath=SunOS+5.10>

home | help