Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
AURECORD(1)		    General Commands Manual		   AURECORD(1)

NAME
       aurecord	- record a sound file from a Network Audio System server

SYNOPSIS
       aurecord	 [-audio servername] [-file format] [-data format] [-rate sam-
       ple rate] [-mode	input mode] [-gain input gain] [-time seconds]	[-com-
       ment comment] [-?] filename

DESCRIPTION
       The  aurecord  program  can be used to record audio data	from a Network
       Audio System server into	a file.	 The recording will continue until ei-
       ther  the  specified  time has elapsed or aurecord receives a SIGINT or
       SIGTERM signal.

OPTIONS
       The following options may be used with the aurecord program:

       -audio servername
	       The Network Audio System	server from which the file  should  be
	       recorded.

       -file format
	       The file	format to be used for the recorded audio data.	The -?
	       option will display a list of valid file	formats.  The  default
	       file format is Sun/NeXT.

       -data format
	       The data	format to be used for the recorded audio data.	The -?
	       option will display a list of valid data	 formats.   Note  that
	       each  file  format may only support selected data formats.  The
	       default data format is 8-bit uLAW.

       -rate sample rate
	       The sampling rate (in hertz) for	the  recording.	  The  default
	       rate is 8000 Hz.

       -mode input mode
	       Some  Network Audio System servers may have different input am-
	       plification modes for microphone	input versus line level	input.
	       This option allows the amplification mode to be specified.  The
	       two modes available are "mic" for microphone input  and	"line"
	       for line	level input.  The default mode is "mic".

       -gain input gain
	       The input gain level in percent.	 The default is	75%.

       -time seconds
	       The time, in seconds, for the recording.	 If this option	is not
	       used, aurecord will record until	a SIGINT or SIGTERM signal  is
	       received.

       -comment	comment
	       A comment to be stored in the data file.

       -?      Displays	 a usage message and a list of supported file and data
	       formats.

SEE ALSO
       nas(1)

COPYRIGHT
       Copyright 1993, 1994 Network Computing Devices, Inc.

AUTHOR
       Greg Renda, Network Computing Devices, Inc.

				     1.9.4			   AURECORD(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | SEE ALSO | COPYRIGHT | AUTHOR

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=aurecord&sektion=1&manpath=FreeBSD+12.2-RELEASE+and+Ports>

home | help